Joe Taylor
9fe2fc6de0
Fix two problems: sometime incorrect setting of RxFreq in WideGraph, and incorrect timestamp for FST4W-120 and FST4W-300 decodes in ALL.TXT.
2020-09-21 14:35:16 -04:00
Bill Somerville
542ffe8311
Improve audio device handling and error recovery
...
where possible audio devices that disappear are not forgotten until
the user selects another device, this should allow temporarily missing
devices or forgetting to switch on devices before starting WSJT-X to
be handled more cleanly. If all else fails, visiting the Settings
dialog and clicking OK should get things going again. Note that we
still do not have a reliable way of detecting failed audio out
devices, in that case selecting another device and then returning to
the original should work.
Enumerating audio devices is expensive and on Linux may take many
seconds per device. To avoid lengthy blocking behaviour until it is
absolutely necessary, audio devices are not enumerated until one of
the "Settings->Audio" device drop-down lists is opened. Elsewhere when
devices must be discovered the enumeration stops as soon as the
configured device is discovered. A status bar message is posted when
audio devices are being enumerated as a reminder that the UI may block
while this is happening.
The message box warning about unaccounted-for input audio samples now
only triggers when >5 seconds of audio appears to be missing or over
provided. Hopefully this will make the warning less annoying for those
that are using audio sources with high and/or variable latencies. A
status bar message is still posted for any amount of audio input
samples unaccounted for >1/5 second, this message appearing a lot
should be considered as notification that there is a problem with the
audio sub-system, system load is too high, or time synchronization is
stepping the PC clock rather than adjusting the frequency to maintain
monotonic clock ticks.
2020-09-20 18:20:16 +01:00
Joe Taylor
1ab59a8d6b
Fully configure WideGpahe after switching to JT65 mode.
2020-09-20 10:17:27 -04:00
Joe Taylor
327808a0bb
One more try at fixing the Fmax() startup problem that Steve sees.
2020-09-18 13:33:30 -04:00
Joe Taylor
52bdd57e57
Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value.
2020-09-18 11:30:23 -04:00
Joe Taylor
41aa5dae74
Make the FTol control invisible in FST4 if Single decode is not checked.
2020-09-17 12:58:59 -04:00
Joe Taylor
e60fc1ca19
FST4 GUI controls for FLow, FHigh, should disappear when Single Decode is checked. And some related improvements.
2020-09-16 20:16:32 -04:00
Joe Taylor
21dc6a5c59
Connect the FLow and FHigh limits for FST4 decoding.
2020-09-16 17:23:59 -04:00
Joe Taylor
2266e8dbb7
Add FLow and FHigh spinner controls to set the FST4 decoding range.
2020-09-16 17:02:40 -04:00
Bill Somerville
abe470b24a
Fix a typo
2020-09-15 15:53:14 +01:00
Bill Somerville
e4eb6eb94e
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-15 10:31:04 +01:00
Joe Taylor
3886411fad
Two more corrections to mode-switch settings of GUI controls in FST4/FST4W.
2020-09-14 13:55:30 -04:00
Joe Taylor
f20c45c167
FST4: Align WideGraph green bar with RxFreq on startup. CTRL-diouble-click on waterfall sets FTol=10 and calls decoder.
2020-09-14 10:56:54 -04:00
Joe Taylor
8f554321c8
Make sure that Tx audio frequency in FST4 mode comes from FST4 TxFreq spinner, not the WSPR/FST4W spinner.
2020-09-14 09:55:33 -04:00
Bill Somerville
5014c62bfa
Notify user when enumerating audio devices
2020-09-13 17:12:11 +01:00
Joe Taylor
39403c2520
Expand the range of allowable values for TxFreq in FST4W.
2020-09-13 09:38:39 -04:00
Bill Somerville
e096b77bc1
Ensure default FTol spin box range covers all possible values
...
This allows persistence between sessions to work correctly.
2020-09-12 15:58:25 +01:00
Joe Taylor
174893395b
Ensure sending correct FTol value from GUI to decoder for FST4.
2020-09-12 09:54:13 -04:00
Joe Taylor
bcdaf395f1
Must set m_bFastMode=false for FST4. Fixes the reported "Hold Tx frequency" issue. Also, ensure display of WideGraph rather than FastGraph for FST4, FST4W.
2020-09-12 09:35:32 -04:00
Bill Somerville
66e887b2f9
Merge branch 'develop' into feat-dropped-frames
2020-09-12 00:19:04 +01:00
Joe Taylor
20085e0ec8
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-11 09:14:24 -04:00
Joe Taylor
2a1ef287a6
Add 300 and 400 Hz to the list of available FTol values for FST4.
2020-09-11 09:13:11 -04:00
Bill Somerville
7d63ef12fa
Remove unused actions from MainWindow UI source
...
Correct a typo as well.
2020-09-11 12:53:44 +01:00
Joe Taylor
e23f7b3434
Don't round off the FST4W RxFreq when FTol is changed. That was a bad idea.
2020-09-10 13:48:08 -04:00
Joe Taylor
b7dc101270
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-10 13:34:54 -04:00
Joe Taylor
b6f990fac2
Allow FTol values down to 1 Hz; let maximum FTol values for FST4 depend on TRperiod.
2020-09-10 13:33:33 -04:00
Bill Somerville
67bd56a6d6
Accessibility improvements
2020-09-10 16:29:51 +01:00
Bill Somerville
ae4cfaf1ae
Start Fox mode on correct tab of tab widget
2020-09-08 21:19:48 +01:00
Bill Somerville
db6a432a33
Ensure band/frequency combo box edit styling tracks current frequency
2020-09-08 15:24:55 +01:00
Bill Somerville
1d52daf7ee
Remove erroneous Qt emit keywords
2020-09-08 12:54:19 +01:00
Joe Taylor
72cffc9da4
Make the FST4/FST4W Quick-Start Guide available from the Help menu.
2020-09-06 13:31:19 -04:00
Joe Taylor
4ab8780dd8
Code cleanyup associated with removing Tab 2.
2020-09-05 15:22:18 -04:00
Joe Taylor
7aeb9d5e2e
Remove the "Tab 2" option for generating Tx messages.
2020-09-05 15:11:32 -04:00
Joe Taylor
403d3a1041
Make "double-click on call" work in FST4 as in oter modes.
2020-09-05 14:09:33 -04:00
Joe Taylor
844fe26368
Fix "on_actionFST4_triggered()" so that it does not call another mode setup routine.
2020-09-05 11:53:23 -04:00
Joe Taylor
c1025b7c4c
Allow user to set center frequency and FTol in FST4W mode. Needs more testing!
2020-09-05 10:34:55 -04:00
Joe Taylor
02928787b1
Save and restore the current setting of the FST4W RoundRobin control.
2020-09-04 15:38:04 -04:00
Joe Taylor
f24d15b16e
Eliminate the FST4/FST4W submodes with hmod > 1.
2020-09-04 15:15:30 -04:00
Bill Somerville
dc423ff28b
Documentation updates for On DX Echo Doppler correction mode
...
Tnx Charlie, G3WDG, and Bob, KA1GT.
2020-09-03 19:38:40 +01:00
Bill Somerville
c5349f8da9
Dynamic update of on DX echo Doppler shift correction
...
Tnx Bob, KA1GT, and Charlie, G3WDG.
2020-09-02 21:25:58 +01:00
Bill Somerville
a623ed0baf
Ensure band/frequency combo box edit shows correct band
2020-09-02 21:08:25 +01:00
Bill Somerville
56741d5e10
Merge branch 'develop' into feat-dropped-frames
2020-08-29 14:05:52 +01:00
Bill Somerville
64f29318aa
Repair an auto-sequencing defect with UDP Reply message handling
2020-08-29 14:04:29 +01:00
Bill Somerville
3a71184040
Include period start time in dropped samples message box details
2020-08-22 18:12:12 +01:00
Bill Somerville
d1860df190
Only send local station info to PSK Reporter when necessary
...
Remove unneeded debug trace messages.
2020-08-18 12:47:17 +01:00
Bill Somerville
b1c53bc332
Fix a cosmetic FT6 DXpedition mode Hound issue that causes an assert
2020-08-17 01:52:47 +01:00
Bill Somerville
536e6568a6
FST4* messages do not need padding out to 37 characters
2020-08-16 02:34:18 +01:00
Bill Somerville
50da40413f
PSK Reporter connection opened & closed at the correct times
2020-08-16 00:38:19 +01:00
Bill Somerville
491a7b9a05
Ensure no connect with, or traffic to, PSK Reporter if not enabled
2020-08-15 23:32:10 +01:00
Bill Somerville
b984390711
Fix PSK Reporter spots of FST4W decodes with power <10 dBm
2020-08-15 23:29:53 +01:00
