Commit Graph

457 Commits

Author SHA1 Message Date
Joe Taylor
2653626d45 Replace the changes I removed by executing 'git reset HEAD~'. 2020-03-16 10:27:22 -04:00
Steven Franke
478fd74e84 Remove reference to obsolete file ft8.f90 in CMakeLists.txt. 2020-02-25 17:06:36 -06:00
Steven Franke
08baa50a01 Experimental change to enable OSD decoding for MSK144 when ntol .le. 50 Hz 2020-02-13 08:48:51 -06:00
Steven Franke
ff109a60ca Implement AP decoding for Hounds when Fox has a compound call with standard base call. 2020-02-03 10:48:51 -06:00
Joe Taylor
3397bf49b4 Add utility program ft4code. 2019-12-18 10:02:00 -05:00
Bill Somerville
b6b8271a6d
Item delegate for SQLite date and time fields 2019-12-08 18:36:04 +00:00
Bill Somerville
d5269c9002
Increase stack size for jt9
A recent change has blown the Windows default stack size.
2019-12-04 17:53:41 +00:00
Steve Franke
a0d471cb0b Improve FT8 SNR estimates in two ways:
(i) SNR no longer saturates at +20 dB
(ii) a large signal in the passband no longer causes the
SNR of weaker signals to be biased low.
2019-11-27 15:58:52 -06:00
Steve Franke
d1530b0c19 Rename ft8sim files as follows:
ft8sim_gfsk.f90 => ft8sim.f90
ft8sim.f90 => ft8sim_fsk.f90

This change reflects the fact that the GFSK waveform is now used in WSJT-X
for ft8 and ft4.
2019-11-27 09:08:17 -06:00
Bill Somerville
60332e799e
Merge branch 'develop' into feat-refactor 2019-07-04 12:34:20 +01:00
Steve Franke
fa44ed84c5 Remove an unused routine. Minor tweaks. 2019-07-03 10:55:13 -05:00
sirhc808
dd53e8d348 incorporate code review feedback 2019-07-02 13:00:32 -05:00
sirhc808
1f57ba5fec improve physical structure 2019-07-02 12:45:05 -05:00
sirhc808
27d4471cde Merge branch 'ft9_refactor' into feat-refactor
# Conflicts:
#	CMakeLists.txt
#	lib/ft4/getcandidates4.f90
#	lib/ft4/sync4d.f90
2019-07-02 12:06:14 -05:00
sirhc808
ee5d5c8ae9 improve physical structure 2019-07-02 10:19:43 -05:00
sirhc808
50ce71b47a improve physical structure 2019-07-01 21:52:32 -05:00
sirhc808
47b8d4422c fix some errrrrors 2019-07-01 21:19:18 -05:00
sirhc808
6692b8427d break build on C++ warnings 2019-07-01 21:15:53 -05:00
sirhc808
4317f54b1a simple CMake fix to use Qt's latest CMake support 2019-07-01 19:36:14 -05:00
Bill Somerville
857afbe500
Merge commit '86c48cb49f3dfb7752a17b80a3ab06d98cd9878d' into release-2.1.0 2019-07-02 00:38:43 +01:00
sirhc808
86c48cb49f Update to use current version of Qt's CMake support 2019-07-01 14:19:43 -05:00
Joe Taylor
9de51ebfa3 Rename and tweak rtty_spec.f90. 2019-06-12 11:31:35 -04:00
Steve Franke
3c23a05d1f Move demod and bit metric calculation to a subroutine. This will make
it easier to experiment with alternative schemes for demod.
2019-06-08 08:34:46 -05:00
Bill Somerville
7d14602b07
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0 2019-06-06 13:19:02 +01:00
Bill Somerville
45b12e6028
Preparation for UI i18n
Re-enabling the WSJT-X i18n  facilities. This allows translation files
to  be created  for languages  that are  automatically used  to lookup
translatable strings. To enable a  new language the language name must
be added to the CMakeLists.txt LANGUAGES list variable in BCP47 format
(i.e. en_US,  en_GB, pt_PT, ...). Do  one build with the  CMake option
UPDATE_TRANSLATIONS enabled  (do not  leave it enabled  as there  is a
danger of loosing existing translated texts), that will create a fresh
translations/wsjtx_<lang>.ts file which  should be immediately checked
in with the  CMakeLists.txt change. The .ts should then  be updated by
the translator using  the Qt Linguist tool to  add translations. Check
in the  updated .ts file  to complete the initial  translation process
for that language.

To  aid translators  their WIP  .ts file  may be  tested by  releasing
(using the  lrelease tool or  from the Linguist  menu) a .qm  file and
placing  that  .qm  file  in the  current  directory  before  starting
WSJT-X. The translations will be used if the system locale matches the
file name.   If the system  locale does not  match the file  name; the
language may be  overridden by setting the  LANG environment variable.
For  example if  a wsjtx_pt_PT.qm  file  is in  the current  directory
WSJT-X will use it for  translation lookups, regardless of the current
system locale setting, if the LANG variable is set to pt_PT or pt-PT.

On MS Windows from a command prompt:

 set LANG=pt_PT
 C:\WSJT\wsjtx\bin\wsjtx

elsewhere:

 LANG=pt_PT wsjtx
2019-06-06 12:56:25 +01:00
Steve Franke
1758e7266b Remove deleted files from CMakeLists.txt 2019-06-05 10:19:40 -05:00
Bill Somerville
19c46774b4
Moving toward multiplier and dupe detection for contest modes
There's not  much to show  for this so far  but some of  the necessary
infrastructure is in place.
2019-05-30 22:20:09 +01:00
Bill Somerville
8035880c45
CMake updates to remove warnings when using recent CMake versions 2019-05-28 19:00:13 +01:00
Steve Franke
a56960a19b Remove syncft4.f90 from CMakeLists.txt. 2019-05-26 10:06:59 -05:00
Steve Franke
3bc5e538d2 FT4: Implement polynomial baseline fit. 2019-05-25 10:58:04 -05:00
Steve Franke
80307b64ad Add a temporary research tool. 2019-05-22 17:01:06 -05:00
Bill Somerville
3a3af42cc6 Tool to exercise QAudioInput
The tool record_time_signal is designed  to measure the performance of
QAudioInput. The  intended use  is to  record a  short period  of live
audio from  an on-air time  signal of  known good quaility,  the basic
required parameters  are an  audio input device,  an output  file name
(.WAV), a start second in a minute,  and a duration in seconds. So for
example to record  the time signal ticks  and fast data at  the top of
the minute:

    $ record_time_signal -o wwv.wav -s 55 -d 15

will record  15s of  audio at  48000Hz sample  rate, stereo,  from the
default audio  input device, starting  at second  55. This will  use a
separate timer  to stop  the recording  which is  likely to  leave the
output file a little short due  to buffer latency. The buffer size can
be adjusted using the '-b <buffered-frames>' option.

The tool  also supoorts  a different mechanism  to time  the recording
which uses the audio progress via  a notify signal. This should ensure
at least  the requested  duration is recorded  The shorter  the notify
interval  the  closer teh  final  size  shoould  be to  the  requested
duration.  Use the  '-d  <interval-ms>' option  to  adjust the  notify
interval.

    $ record_time_signal -o wwv.wav -s 55 -d 15 -n 100

Non-default audio devices can be selected, use the '-I' option to list
the available input  devices with an index number that  can be used to
select the device using the 'R <device-number>' option.

Other options are available, use '-h' for details.
2019-05-10 17:27:52 +01:00
Steve Franke
be72461142 FT4: Some groundwork for subtraction. 2019-04-18 14:15:24 -05:00
Joe Taylor
e0d4c94cc1 Some very basic functionality for time-synchronized FT4. 2019-04-01 14:23:10 -04:00
Bill Somerville
303ff7da5f Improved CMake script for 64-bit builds on MS Windows 2019-03-25 18:02:50 +00:00
Bill Somerville
0d42ad5b3e Revert RC number and fix CMake build script 2019-03-23 01:21:42 +00:00
Steve Franke
4769bf45d2 Make FT4 AP decoding work in RTTY RU and Field Day activities.
Move Nuttal window to standalone subroutine nuttal_window.f90 and
use Nuttal window in ft4/getcandidates4.f90.
2019-03-03 13:02:22 -06:00
Bill Somerville
278c544a6a Merge branch 'develop' into feat-ft2 2019-02-26 11:52:14 +00:00
Bill Somerville
c60fbc11b6 Fix samples CMake script and update NEWS and copyright dates
Preparation for v2.0.1 GA release.
2019-02-25 03:07:51 +00:00
Steve Franke
1acb5d5d99 Add routines needed to test FT8 with GFSK pulses. 2019-02-21 15:48:02 -06:00
Joe Taylor
073a22125a Minor cleanup: debugging a problem with FT4 decoding. 2019-02-14 14:09:22 -05:00
Bill Somerville
7ec99d2a75 Update CMakeLists.txt to reflect the oldest supported macOS version (10.10) 2019-02-10 22:08:04 +00:00
Steve Franke
cbfcb76193 AP decoding basically works. Make data_dir setting work on the Mac. 2019-02-07 18:48:38 -06:00
Joe Taylor
98d665c678 Add subroutine clockit() and use it for profiling ft4_decode(). 2019-02-01 10:47:47 -05:00
Joe Taylor
9c2700128c Generation of FT4 Tx waveform from itone() moved to a separate subroutine. 2019-01-31 16:07:07 -05:00
Joe Taylor
189f538dc0 Add ft4sim_mult, which is basically functional. 2019-01-30 15:33:47 -05:00
Joe Taylor
6e4f0f32ee Remove FT2; implement basic functionality in FT4. 2019-01-28 10:19:46 -05:00
Steve Franke
d9f4a27a3e Create ft4_decode.f90. Change stand-alone decoder ft4d.f90 to use ft4_decode.f90. 2019-01-26 11:42:07 -06:00
Steve Franke
66e3f11fba Add ft4 files in lib/ft4. 2019-01-25 16:01:34 -06:00
Bill Somerville
6ac24e75cb Add the new rigctlcom utility to the installer as rigctlcom-wsjtx
Thanks to Mike, W9MDB, for this contribution.
2019-01-22 20:23:17 +00:00