Joe Taylor
291c66806a
Various corrections/additions to DXpedition Fox mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8262 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-27 20:22:44 +00:00
Joe Taylor
5a023e8ea9
More work on the Fox GUI.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8237 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-15 16:38:35 +00:00
Joe Taylor
37c5d06504
Resuming work on the Fox GUI.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8236 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-14 21:01:20 +00:00
Steven Franke
f039bc6625
Label JT65 AP decodes as such.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8220 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-05 14:44:15 +00:00
Steven Franke
487cebf09c
Experimental implementation of AP decoding for JT65 - configured for testing only. Not usable on the air.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8219 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-04 17:03:56 +00:00
Steven Franke
a5e10b9967
Some changes to facilitate experimentation.
...
1. Send nQSOProgress into jt65 decoder.
2. Add experimental version of extract.f90.
3. Change CMakeFile.txt to use experimental routines.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8217 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-04 00:40:08 +00:00
Joe Taylor
67ba6ac23d
More progress on FoxCalls...
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8204 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-01 14:32:21 +00:00
Joe Taylor
d4652ef0e5
More progress on FoxCalls...
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8199 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-30 20:47:08 +00:00
Joe Taylor
b5b3ffbfbf
Enable "nagain" for FT8, as in other modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7980 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-02 14:05:37 +00:00
Joe Taylor
e6635624f5
Make 72-bit "contest mode" available in FT8 as well as MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7969 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-28 15:50:13 +00:00
Bill Somerville
33b1742568
Add QSO state machine state and tx audio offset to parameters passed to slow decoders
...
Required to pick best AP masks in FT8 decoder
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7958 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 21:19:21 +00:00
Steven Franke
dc5305573d
Move '?' quality warning to message(22:22).
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7945 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-25 19:06:05 +00:00
Steven Franke
d06912a075
More informative end-of-line annotation for AP decodes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7935 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-22 17:12:48 +00:00
Steven Franke
bbbcae9233
Add variables lapon and napwid to control ap decoding. Reconfigure the logic for AP decoding and ordered-statistics decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7933 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-22 03:01:09 +00:00
Joe Taylor
73df0d00ef
1. Alt+F8 arms "Call 1st" as if a CQ had been sent.
...
2. "Call 1st" label turns red when armed to respond to a caller.
3. Suppress some recognizable false decodes, send them to cumulative file
"data_dir/false_decodes.txt".
4. Reduce sleep delay in decoder() to 10 ms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7928 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-20 15:15:00 +00:00
Steven Franke
4594aaa589
Work on ap decoding. Diagnostic write enabled.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7925 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-18 01:12:11 +00:00
Joe Taylor
a8cba435d4
Code cleanup and test ofFT8 decodes with erasures. Do not use on the air.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7879 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 16:02:01 +00:00
Steven Franke
1c2695332a
Send mycall,hiscall,hisgrid into the ft8 decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7797 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 20:00:42 +00:00
Joe Taylor
ab3832fa82
In ft8_downsample, compute long FFT only when data have changed.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-03 19:52:36 +00:00
Bill Somerville
f73a35842a
Reduce stack usage of F8 decoder modules
...
Reverted to default stack allocation for jt9.exe on Windows.
Tidied up FT8 decoder inteface to remove arguments that will probably
never be used.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7768 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 18:46:14 +00:00
Joe Taylor
e20bd5eae1
Don't execute AutoSeq steps after sending a 73.
...
For FT8 mode:
1. Open LU 13 in the proper way.
2. Disable diagnostic LU 51.
3. Add keyboard shortcuts CTRL+Plus, CTRL-Minus, to adjust audio Tx frequency
in even 50 Hz steps.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7749 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 13:42:24 +00:00
Joe Taylor
80ad721524
Code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7742 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 20:50:17 +00:00
Joe Taylor
41336209c8
Rearrange some FT8 code for consistency with other modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 19:44:12 +00:00
Joe Taylor
91fbeff072
Many GUI adjustments for FT8.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 15:24:56 +00:00
Joe Taylor
3ba80279ec
Start a framework for FT8 decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 15:55:30 +00:00
Joe Taylor
3c7e20b05b
Better scheme for displaying QRA65 sync results.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7561 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-10 16:38:19 +00:00
Joe Taylor
f66d142963
Try up to three times to open 'decoded.txt".
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7559 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-07 14:31:11 +00:00
Bill Somerville
cf97a23379
Temporarily disable the Tx/Rx transient suppressor introduced in r7424
...
This code was causing the JT9 decoder to fail to decode, maybe due to
high noise levels and the resulting discontinuity introduced by
zeroing out samples.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7555 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-27 02:22:54 +00:00
Joe Taylor
df35f519df
1. As a test, zap any data at start if id2() that appears to be a T/R transient.
...
2. Send emedelay (now 0 or 2.5) to QRA64 decoder.
3. Tweaks to sync64, making it better for QRA64A.
4. Mainwindow MessageBox if it attempts to open a file with wrong format.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 20:51:27 +00:00
Joe Taylor
ec7e099cf8
Further adjustments to sync64; extend QRA64 data length to 54 s; some code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7414 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:27:23 +00:00
Joe Taylor
82ecc6afcf
Correct the sending of minsync to decoder. Fix statement ordering that affects timer calls.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7370 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-08 15:38:54 +00:00
Joe Taylor
f9a078dd8b
Revert to displaying Nico's return code with QRA64 messages. Suppress a few false decodes that cannot be correct messages.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7342 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 15:11:00 +00:00
Joe Taylor
5da4ae6363
Set naptype properly; protect nap() index from out-of-range values.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7341 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 16:38:39 +00:00
Joe Taylor
4838d97370
New parameters for AP decoding in QRA64. Do not use this revision on the air!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 15:50:47 +00:00
Joe Taylor
869d62aae1
Change the indicator from 7 to 6: max number of AP bits is 68.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7337 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-23 12:40:48 +00:00
Joe Taylor
76e8f5ec85
In place of the qra64 return code as is, display a number that increases monotonically with the amount of a priori information used.
...
Here's the translation, as a lookup table. The displayed number is the tens
digit of the number of a priori bits.
rc APxx displayed
-------------------
0 0 0
1 27 2
2 42 4
3 29 2
4 44 4
5 57 5
6 29 2
7 44 4
8 72 7
9 55 5
10 70 7
11 70 7
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7325 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 16:51:11 +00:00
Joe Taylor
72dfe01bf3
Working on QRA64 sync, snr estimates, etc., for QRA64 decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7321 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-15 21:39:55 +00:00
Joe Taylor
a251c045e3
Rationalize several VHF-oriented features of the JT4 and JT64 decoders. More additions to the User Guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7227 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 20:48:24 +00:00
Joe Taylor
87d4f2fdbc
Use bVHF rather than single_decode to control display of params at end of decode line.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 15:25:25 +00:00
Joe Taylor
f5737348fe
Good decode implies sync OK. Also some code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6949 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-26 16:44:35 +00:00
Joe Taylor
77e295d36d
Plot a red "sync" curve in QRA64 mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6876 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-06 14:18:23 +00:00
Joe Taylor
63fa30b0b2
A few more renames, QRA65 --> QRA64.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6849 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 12:48:27 +00:00
Joe Taylor
bb1e8f6692
Minor tweaks to QRA sync handling.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6844 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 15:25:41 +00:00
Joe Taylor
e23017d9e3
Improving the QRA sync-detect algorithm.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6843 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 15:16:00 +00:00
Joe Taylor
0384d312a6
Temporary mode QRA02 is now basically functional (though buggy).
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6833 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 20:38:36 +00:00
Joe Taylor
529ad6eec9
First functional decoder for QRA01.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6805 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 14:36:03 +00:00
Bill Somerville
5e7b750ac3
Initialize decode counts before decoding
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 23:39:19 +00:00
Joe Taylor
22340f66e4
Suppress some compiler warnings. (More to come...)
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6748 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 19:39:48 +00:00
Joe Taylor
27fb2d8126
Minor cleanups and corrections to the JT4 and JT65 decoders when
...
using deep search and/or averaging.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6696 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-24 16:00:00 +00:00
Joe Taylor
4bcc4f35a1
Much improved detection of sync in JT4 decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6686 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-19 19:19:47 +00:00