Commit Graph

380 Commits

Author SHA1 Message Date
Joe Taylor
2a307b776c Display the "CQ Only" checkbox only in modes where it may be useful.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8539 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-28 13:50:58 +00:00
Bill Somerville
a0f117bf10 Don't block main window construction with not GA version warning message
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8531 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-25 00:57:45 +00:00
Joe Taylor
2fb7cfbdcc Fix the way tx status label is set for Fox transmissions.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-21 15:48:56 +00:00
Joe Taylor
692fa93501 Fix several Fox bugs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8511 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-20 16:44:11 +00:00
Joe Taylor
3366442596 Access to "FT8 DXpedition Mode User Guide" from the Help menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8503 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-12 16:29:16 +00:00
Bill Somerville
8d7b9bba56 Revert to pre r8430 behaviour except when hound using FT8
The "Hold  Tx Freq" check  box allows one's  Tx frequency to  be fixed
when  replying by  double-clicking a  decode. When  in FT8  hound mode
one's Tx frequency is always held when double-clicking a decode unless
directed by  internal logic  to change. Direct  Tx offset  changes are
still allowed in hound mode, as are the normal waterfall clicks.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8490 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-11 02:29:27 +00:00
Joe Taylor
da7da823cb Remove the "single-click" patch, it appears to have problems.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-06 21:49:57 +00:00
Joe Taylor
ebd7f465fd As a trial: single-click on a decode to select a new DX Call; double-click to also Enable Tx.
Thanks to W9MDB for this patch, which also removes the option *Double-click on
call sets Tx Enable*.  Please test and report any perceived issues!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8462 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-06 20:27:00 +00:00
Joe Taylor
a6f6554270 Minimize useless late starts of transmissions.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8459 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-05 20:13:16 +00:00
Joe Taylor
9a4ddf269e Reject message with ";" unless Hound mode selected or CRC10 matches DX Call.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8455 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-05 15:16:29 +00:00
Bill Somerville
3c384f7cbb Add UDP message to set temporary Maidenhead locator
When "Auto  Grid" is  checked in  "Settings->General" UDP  messages of
type "Location" will update a temporary  DE grid square. The intent is
to  allow  an external  application  joining  the WSJT-X  UDP  message
protocol to dynamically update the DE grid during mobile operation.

This change also tidies up  some outstanding issues around logging the
operator call.

This change  adds a new UDP  message "Logged ADIF" that  is emitted in
parallel with  "QSO Logged"  messages. The new  message is  valid ADIF
file format  and contains the  logged QSO  fields. The intent  is that
basic  UDP server  applications  might already  have  ADIF log  record
capture capabilities and could use  this message to feed existing ADIF
parsing routines to log QSOs. All that should be needed is to identify
this message type and the single field is ADIF compatible ASCII.

Thanks  to  Brian,   N9ADG,  for  the  patches  that   lead  to  these
enhancements.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8454 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-04 22:42:35 +00:00
Joe Taylor
d1be2506a9 Several enhancements to DXpedition mode:
1. Insert dummy report when Hound is called by complex-callsign Fox.
2. Allow Fox to transmit anywhere between 300 and 900 Hz.
3. Restrict randomized Hound freq to the range 1000 - 3000 Hz.
4. Suppress Fox signals that would be duplicates.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8376 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-27 21:06:57 +00:00
Joe Taylor
ccca0ad9eb More corrections for compount FoxCall.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8366 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-22 18:30:35 +00:00
Joe Taylor
8f4487b2b3 Add Logged label and implement display of QSO Rate for last hour.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8360 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-22 15:31:09 +00:00
Joe Taylor
71986f4eed Add FoxQSO.txt; sbRepeats -> sbMaxTime; randomize Tx freq for Hound R+rpt; code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8358 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-22 14:51:22 +00:00
Joe Taylor
161ac6e76a All-new algorithm for determining Tx messages for Fox.
Also, extend max cmsg length to 40 characters.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8356 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-21 20:55:38 +00:00
Joe Taylor
1dd9357b44 Minor code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-19 19:12:59 +00:00
Joe Taylor
ac818337a6 Use 30 s intevals for "Age" units. Clean up labels when Message Avg window used for Fox Log.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8348 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-19 17:01:38 +00:00
Joe Taylor
71a395c1c2 Bewars: displayWidgets() stuff is not yet complete!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8343 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-18 21:50:00 +00:00
Joe Taylor
bceb795d04 Allow CQonly to re-display after toggle.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8336 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-16 18:16:02 +00:00
Joe Taylor
5a716157f9 Several tweaks and additions to GUI behavior in DXpedition mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8332 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-15 15:26:18 +00:00
Joe Taylor
516aef2e99 Enforce proper GUI settings for Fox and Hound; restore for "normal" operation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8331 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-14 16:50:46 +00:00
Joe Taylor
16ac701783 Working on the Fox GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8322 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-13 17:20:21 +00:00
Joe Taylor
83210b659e Correct a flaw in declaration of foxRxSequencer().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8305 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-09 00:25:40 +00:00
Joe Taylor
768974cb1e Code cleanup; more Fox-mode additions.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8294 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-07 17:09:03 +00:00
Joe Taylor
0a07f6058a More work on Fox-mode code. Another intermediate commit -- much still TBD.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8293 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-07 15:38:48 +00:00
Joe Taylor
eb9a0d5e67 Working on Fox-mode code. Another intermediate commit -- much still TBD.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8292 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-06 21:38:24 +00:00
Joe Taylor
cac7b7c363 Working on Fox-mode code. This is an intermediate commit -- much still TBD.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8291 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-06 17:05:48 +00:00
Joe Taylor
3acb75bb41 Code cleanup; resort displayed Hound calls after activating the sort ComboBox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8288 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-04 18:18:03 +00:00
Steven Franke
56675b1e2f Remember time of last transmission.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8279 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-03 21:59:59 +00:00
Steven Franke
a344d44fa2 Try to make decode menu work properly when moving between modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8278 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-02 16:04:52 +00:00
Joe Taylor
6eeece9a4b Code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-01 20:54:35 +00:00
Joe Taylor
b5d9729bd5 Preparing code to log Fox QSOs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8273 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-30 21:16:30 +00:00
Joe Taylor
00e0d76fc2 Work-in-progress with Fox-mode code. Contains incomplete and untested code!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-30 18:45:51 +00:00
Joe Taylor
8b1ec72b1f Operator field for DXpeditions and other Multi-Op events.
Operator callsign is sent to DIF log if not empty.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8267 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-29 19:43:27 +00:00
Joe Taylor
ac05ca7a91 More work on Fox GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8241 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-16 16:33:15 +00:00
Joe Taylor
e5dce12086 Add user controls for Nsig, Nslots, Max_dB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8238 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-15 20:47:24 +00:00
Joe Taylor
5a023e8ea9 More work on the Fox GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8237 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-15 16:38:35 +00:00
Joe Taylor
ae66bf524e More work on Fox GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8215 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-03 18:51:40 +00:00
Joe Taylor
c9e9de2ea0 Working on the Fox GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8214 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-03 18:27:46 +00:00
Joe Taylor
4df5d99441 Some cleanup of new Fox GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8211 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-02 20:35:22 +00:00
Joe Taylor
a72de82a39 Experimenting with a new Fox GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8210 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-02 18:45:19 +00:00
Joe Taylor
f01031fed5 Some progress on FoxCalls...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8198 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-30 17:33:25 +00:00
Joe Taylor
3e5f703ed2 Starting to experiment with FoxCalls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8197 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-30 15:18:54 +00:00
Bill Somerville
895ff4dcc0 Generic handling of keyboard modifiers via UDP and double-clicks
This  change opens  up  all  keyboard modifier  options  to UDP  Reply
messages as well as double-clicks of decoded messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-13 22:34:36 +00:00
Bill Somerville
6424b4986f Improved frequency calibration
Measure check  box added to FreqCal  mode, check to record  to fmt.all
with  current  calibration correction  disabled,  uncheck  to see  the
impact of the current calibration parameters.

The  fmt.all  file  is  now  optionally  renamed  to  fmt.bak  when  a
calibration solution  is accepted.  This allows  users to  preserve an
fmt.all file that they might have edited for best fit.

A calibration procedure might proceed thus:-

1) select FreqCal mode,

2) step through suggested  calibration test frequencies deleting those
that have no usable signal,

3) enable "Menu->Tools->Execute frequency calibration cycle" and check
that suitable signals are present,

4) select a suitable FTol and T/R period,

5) check  "Measure" and let the  cycle complete a few  times to gather
data,

6) uncheck "Measure" to complete the data capture, optionally tidy the
fmt.all file with your favourite editor,

7) push "Menu->Tools->Solve for  calibration parameters" and accept if
you like what you see,

8) sit back and admire your accurately frequency calibrated station.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8167 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-13 22:34:21 +00:00
Joe Taylor
26b567b4f0 Add more on Copyright protections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8156 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-02 18:27:08 +00:00
Joe Taylor
d7baae12f8 Another try at optimizing the GUI for simplex and split behavior. Details below:
1. Checkbox "Double-click on call sets Tx and Rx freqs" has been removed
from the Settings -> General tab.

2. Checkbox "Lock Tx Freq" on main window is relabled "Hold Tx Freq".

3. Behavior now defaults to the "simplex" behavior in use up to code
revision r8123.  In particular, double-clicking on decoded mesages
that do not contain your own call moves both Rx and Tx frequencies.
If the first callsign is your own call, only Rx freq moves.

4. If "Hold Tx Freq" is checked, double-clicking on decoded messages
moves the Rx frequency; Tx frequency is moved only if CTRL was held
down.

5. Clicking on the waterfall moves Rx and Tx frequencies as before:
Rx only on a simple click, Tx only on SHIFT-click, and both on
CTRL-click.  This happens even if "Hold Tx Freq" is checked (which
is why this box is no longer labeled "Lock Tx Freq").


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8146 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-30 17:48:46 +00:00
Joe Taylor
b502bd9a91 Minor change to make shift/ctrl double-click logic more consistent.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-29 13:27:55 +00:00
Joe Taylor
04b0563d19 Experimental new behavior for "Lock Tx=Rx" and for clicking on waterfall and decoded text.
1. Checkbox "Lock Tx=Rx" is now labeled "Lock Tx Freq", and its meaning is
quite different.  If checked, the audio Tx frequency cannot be changed.
It's like the "Lock" function on some transceivers.

2. Clicking on the Wide Graph waterfall and on lines of decoded text now
behave as follows:

Click on       Action
---------------------------------------------------------------------
Waterfall:     Click to set Rx frequency
               Shift-click to set Tx frequency
               Ctrl-click to set Rx and Tx frequencies
               If Lock Tx Freq is checked, Tx freq does not move
               Double-click to set Rx frequency and decode there

Decoded Text:  Double-click to copy transmitting callsign to DX Call
               and locator to DX Grid; change Rx frequency to decoded
               signal's frequency; generate standard messages.
               Tx frequency is not changed unless Ctrl is held down
               and Lock Tx Freq not checked.

If this experimental behavior is adopted, some descriptions in the
User Guide and Special Mouse Commands will need to be updated.

3. Starting to implement a new function on the Tools menu,
"Solve for calibration parameters".  This is not yet finished;
DO NOT USE in its present form.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-27 12:39:50 +00:00