w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-26 22:28:41 -05:00
Code Issues Packages Projects Releases Wiki Activity
6,605 Commits 5 Branches 98 Tags 208 MiB
2c0462f9aa
Commit Graph

561 Commits

Author SHA1 Message Date
Bill Somerville
46638f6f07
Add shared memory synchronization to make access safe 2020-03-15 00:25:35 +00:00
Joe Taylor
649a79dfc1 New IPC trial: use shmem instead of .start .stop .quit files. 2020-03-14 17:06:54 -04:00
Bill Somerville
523e9a1a07
Enhanced process control for jt9 executable 
The wsjtx  process creates control  files .start, .stop, or  .quit and
the jt9  process deletes  them.  This  is intended  to avoid  any race
conditions that get the processes out of sync.
 2020-03-14 00:01:54 +00:00
Joe Taylor
ebf4952c7c Auto-clear of hung decoder status. 2020-03-13 14:25:12 -04:00
Joe Taylor
8151816c84 Change formats of diagnostic writes so that GUI and Fortran output can be sorted together. 2020-03-13 11:25:22 -04:00
Joe Taylor
fedb72a38c Set m_nDecodes=0 only after the 50-buffer decode pass. 2020-03-12 16:52:19 -04:00
Joe Taylor
afe0262ec9 Previous commit message should have mentioned number of decodes is now displayed on status bar. 2020-03-12 15:11:20 -04:00
Joe Taylor
8e7685ea36 Do not alolow bailouts when data were read from disk. 2020-03-12 15:07:56 -04:00
Joe Taylor
6e308f0018 More attempts to diagnose or fix the FT8 "hung decoder" issue. 
On the Fortran side:
 - For the nzhsym=41 activation, bail out if m_ihsym reaches 45
 - For the nzhsym=47 activation, bail out if m_ihsym reaches 48
 - Change the format and content of what's written to fort.71
 - Change msdelay from 10 to 1

In mainwindow.cpp:
 - change format and content of what's written to qDebug
 - always start FT8 decoder at m_ihsym = 41, 47, and 50
 2020-03-12 12:33:34 -04:00
Bill Somerville
6a7263dc94
Add escape route from retries of IPC errors 2020-03-11 22:38:41 +00:00
Bill Somerville
c58a690bf1
Add error checking to jt9 process control by .lock/.quit files 2020-03-11 22:26:41 +00:00
Joe Taylor
4d9c9e08e2 If 47-buffer call takes too long, start the 50-buffer call late. 2020-03-11 16:03:51 -04:00
Joe Taylor
d69cb49e9a Diagnostic writes to fort.71 in jt9a.f90. 2020-03-11 14:02:19 -04:00
Joe Taylor
199ff3dd3d Experimental work-around for FT8 decoding on slow computers. Important changes: 
- don't start function decode() is decoder is already busy
  - send updated m_ihsym to jt9[.exe] via ss(1,1).  Bill won't like this!
  - jt9 bails out of the 41-buffer pass at m_ihsym=45.
 2020-03-10 16:26:42 -04:00
Joe Taylor
592f4eea71 Remove a qDebug() call. 2020-03-09 15:29:57 -04:00
Steven Franke
f2266c3c54 1. subtractft8: on the last call to sqf, don't need to do the long FFT. 
2. mainwindow.cpp: based on the time when <DecodeFinished> is received, calculate
mswait to try to place the killFile time at 0.75*m_TRperiod.
 2020-03-06 11:06:44 -06:00
Joe Taylor
431ec50212 Progress toward decoding at 41/47/50 buffers. Not yet complete! 2020-03-05 15:37:31 -05:00
Steven Franke
6773768586 Clean up the timestamp adjustment logic, and make the threshold 0.5*TRperiod. 2020-03-05 11:25:49 -06:00
Steven Franke
07c753e284 Make ALL.TXT Rx timestamp equal to the beginning of the TR period, even if the decode comes in after the start of the next TR period. Make Tx timestamp the actual time that Tx started. 2020-03-05 11:16:56 -06:00
Joe Taylor
8e7a56634b Set nearly=41; don't write <DecodeFinished> after the early decode pass. 2020-02-28 15:03:39 -05:00
Joe Taylor
b9888a09ff Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-02-26 13:16:12 -05:00
Joe Taylor
6afff5821e Correct the times written to ALL.TXT when decode occurs after the T/R boundary. 2020-02-26 13:15:22 -05:00
Steven Franke
0ca6cbb575 wsprd: improve decoding and reduce the number of false decodes 
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
 2020-02-25 10:48:38 -06:00
Joe Taylor
4a4864d2ae FT8 early decoding is now working. 2020-02-13 15:05:37 -05:00
Steven Franke
70b84478f0 Add WW_DIGI to the special activities section. Make necessary changes to 
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
 2020-01-24 11:26:36 -06:00
Steven Franke
a63e6e1209 - Force the use of standardized CQ modifier for FT4/FT8 contest operation. 
- Pass CQ modifier string to the ft4 decoder.
 2020-01-08 08:41:47 -06:00
Bill Somerville
75c9e1d696
Fix a patching error 2019-12-29 12:34:02 +00:00
Bill Somerville
5e3781e9e9
Correct some UI text typos 
Thanks to Christoph, DF7CB, for providing a patch for these typos.
 2019-12-29 12:25:59 +00:00
Bill Somerville
5a23edbbae
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2019-12-08 18:42:06 +00:00
Bill Somerville
485f787cef
Increase maximum SNR filter value in Fox mode to 70dB 
This change abandons the previous settings file key for this control
so that all users pick up the new default of 70dB.
 2019-12-08 18:39:37 +00:00
Bill Somerville
32c36f566d
Use DB date time field item delegate to imbue editing in log windows 2019-12-08 18:37:35 +00:00
Joe Taylor
7540d2137a For accessibility: Alt+R sets Tx4 message to RR73, Ctrl+R to RRR. 2019-12-05 11:27:17 -05:00
Bill Somerville
fb1b2e7687 Tagging the WSJT-X v2.1.1 release 
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a8/QACgkQ2GSwbR6B
 YY8y+ggAqwaaCRMCSwDzStooYjStJErVoZ/yB//MmoF+798TBb+3MkiT+KclW7aN
 rxTOmEJ+a84PmsiW6Qz/AAcHPnbKDhtwWASZooopgNYDfgyaUib3HfIa+cFJO6my
 OUzlTsH94yDxeBCWOtf1dLiP0YwJKfp/vxzbfDAWXTd4dx3Ok/7KwghYocmP3eCq
 ruZ+dWojQzwE+h50P6B9gTFxGWMHUDDNeZ/c8u494wqDQvQaRoM9oOnQWzlGiMis
 JaerraI52JEdFLnXjtLYeyXtfg+zA0KvRY2DWy1aCPpGkNjy3DPNlOA+cDQpzBru
 NIqsUF+GplgkVs3sKNLXq36ZgaBQBg==
 =5w4B
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a9R8ACgkQ2GSwbR6B
 YY9SWQf+JdfIvlHy8ExSs9ImCLck/e66V2OAqaEONQX1bEC4QiG3M/rVJGgf2iFz
 ZFshtilsajlpsYZQIFToTmJmI76eGLAmyNIcZN2WpcJQMNWZnxqklMj2wIHbRh+g
 Pvw3FC+lc4LUjZCCMYrVjNXxsRmQtjqV1lVFBnmrAWCdrgHmhyrVbPZT4B+fRTXL
 ikw/BiRgxhI0aoIWKzNrtztMYUBjanKLTHE81AVgsgZkBDNybOjR7mE2E/Jwc4Qx
 mVu+Z0uI+bVuBlMOrqp0K+rrUz7qMZe5/AMSRbgzwfueEOIShgu2wrfV++3JDXLH
 AhtIAcL/b39RBx0jkFE8rBKaZpkoAw==
 =DNp6
 -----END PGP SIGNATURE-----

Merge tag 'wsjtx-2.1.1' into develop

Tagging the WSJT-X v2.1.1 release
 2019-11-24 21:24:39 +00:00
Joe Taylor
849e8c7c55 When using EU VHF Contest messages, update the received exchange m_xRcvd only if decoded messages is addressed to me. 2019-11-18 14:00:42 -05:00
Bill Somerville
58c901240b
Use call, mode, and frequency from Log QSO for worked before records 
The current frequency,  mode and, call were incorrectly  being used to
create a new  worked before record from a logged  QSO. This meant that
band changes  etc. made  before clicking  "Ok" to log  a QSO  would be
erroneously attributed to the worked before records.
 2019-09-17 21:04:34 +01:00
Bill Somerville
a3efe8117c
Qualify regeneration of GFSK message regeneration to only when Txing 2019-09-07 21:23:39 +01:00
Bill Somerville
137bc1ccab
Tx waveform regeneration for GFSK modes Tx audio offset change 2019-08-15 15:20:45 +01:00
Bill Somerville
cefadfeaa3
Disable auto Tx before logging dialog shown even if disable Tx on 73 is not set 2019-08-13 00:20:40 +01:00
Joe Taylor
79b805b0e7 The start of some code for computing QSO points in WWROF/SCC digi-contest. 2019-08-08 09:55:08 -04:00
Joe Taylor
f265fa83f5 Disable the "not GA" warning message. 2019-07-18 15:30:33 -04:00
Bill Somerville
28f5cb0fb9 WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0 
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qXxcACgkQ2GSwbR6B
 YY/ZGAf8Da+a+83dpnj5dnosIKWwSwgpiWHY0JKzm8fp0n3hcs5+rV1/gM81xXKT
 J3lbHWykGzMYlZNoEw3eNwQbXzOCf/7mOaeTKJQnBLukMpTLmsz5b5nYaCjvvRGM
 6HKSddNS3Q4iz4qdakOgWnqdZeYJkRR3Z3XsTmlrG02GsSVlbXzOEyceooqM6EGd
 w5WTkvpls+43OzwcGJ50SHzPlBAJYycE9vrAxxFOxU2fhqRRD/ttMZmUmjRY7Iqa
 jRRQ39K1Io7i9QG/3V6FBZDttqeFfvvlkVzH0/TeMeCUOQiKbzuGxM01PJ6be7D1
 H114v5l06GH56T7qpaF0IB2ZStkbrA==
 =voDy
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qX30ACgkQ2GSwbR6B
 YY8p0QgAgt8Y/yLCyFw0+wfO2h8yIFyh2j1c8EfBf0+I/2xaIYMUfPPlmC3jkWhw
 mtoCJVKkpCNcxr9mo6wjQp7x90pRUH3k78O0VtzbKWz7lveoN7Vguo+iVHDbEhUA
 a9E6yMwvskH5Mr6+cFiS4EVYyjAsuG/BL+4FFMDUVQOaKXNBbgJuc2mjpHkcnEbK
 C+XUxipcAUElH1Ks90eHT/vLoowAOP9jo0xSR1RqJMJlaKHxWZivsBCfQdI1xxn0
 arlQO3bjIsxyNq/Ru7XWV5C56JmWjoPWCcqt5GRrNJLwGw/haSuDIMURaE/vrMif
 csar293vcm5PzuTADArTQkhqK951pQ==
 =1mJJ
 -----END PGP SIGNATURE-----

Merge tag 'wsjtx-2.1.0' into develop

WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0
 2019-07-13 23:47:18 +01:00
Joe Taylor
ced74644fd On startup or switching to QRA64 mode, set Tx and Rx audio freqs to 1000 Hz. 2019-07-09 14:59:34 -04:00
Bill Somerville
01aaa852e3
Updates to support Qt v5.13 
Replacement of deprecated Qt functions and member functions.
 2019-07-08 01:37:04 +01:00
Bill Somerville
ab9675c2a7
Squash several compiler warnings 2019-07-03 01:51:40 +01:00
Bill Somerville
40cf45c259
Squash a compiler warning 2019-07-03 01:25:25 +01:00
Bill Somerville
cee3c9796f
Squash a compiler warning that was also a potential defect 2019-07-03 00:16:39 +01:00
Bill Somerville
a27668428b
Cleaner warning sidestep 2019-07-02 21:07:43 +01:00
Bill Somerville
e7ace39e44
Fix a warning 2019-07-02 19:33:09 +01:00
Chris Karpinsky
a30d97fb57 Merged develop into feat-refactor 2019-07-02 13:11:40 -05:00
sirhc808
dd53e8d348 incorporate code review feedback 2019-07-02 13:00:32 -05:00
sirhc808
1f57ba5fec improve physical structure 2019-07-02 12:45:05 -05:00
sirhc808
27d4471cde Merge branch 'ft9_refactor' into feat-refactor 
# Conflicts:
#	CMakeLists.txt
#	lib/ft4/getcandidates4.f90
#	lib/ft4/sync4d.f90
 2019-07-02 12:06:14 -05:00
sirhc808
ee5d5c8ae9 improve physical structure 2019-07-02 10:19:43 -05:00
sirhc808
84fd0ed7c7 clean up a few warnings 2019-07-01 21:10:43 -05:00
Bill Somerville
1968597783
Merge branch 'release-2.1.0' into develop 2019-07-02 00:18:22 +01:00
Bill Somerville
adcf202637
Repair a crash when decoding ISCAT 
Passing a  auto stack variable to  a future is  not a good idea  as it
will almost certainly  go out of scope before the  future has finished
executing.
 2019-06-30 12:17:17 +01:00
Bill Somerville
c65d832356
New UDP messages to close and reconfigure WSJT-X plus more status fields 
The Status(1) message acquires the new fields Frequency Tolerance, T/R
Period,  and  Configuration Name.  The  Rx  DF,  Tx DF  fields  become
unsigned (this should be a benign change which is just for correctness
as -ve values have never been possible).

The   Close(6)  message   becomes  bi-directional   allowing  external
applications to gracefully close down WSJT-X instances.

A  new  message SwitchConfiguration(14)  is  provided  that allows  an
external application to  switch the current configuration  of a WSJT-X
instance.

Another  new  message  Configure(15)  is provided  to  allow  external
applications to adjust some key parameters like the mode and submode.

See the  NetworkMessages.hpp header  commentary for full  details. The
UDPExamples/MessageAggregator reference  application has  been updated
to be able to exercise all of the above changes.

Note   that   this   commit   enforces  stricter   checking   on   the
"Settings->Reporting->Allow  UDP  requests"   option,  which  must  be
checked  before  any state  changing  incoming  messages to  a  WSJT-X
instance are processed.
 2019-06-25 14:35:58 +01:00
Bill Somerville
91aa591a71
Better ADIF conformance for ARRL Field Day mode 
This change may break N1MM Logger+ integration, notably the CLASS ADIF
field is  populated which may not  be recognized by N1MM  Logger+, nor
interfaces to it.

One exception to  ADIF conformance is that the ARRL_SECT  field may be
populated with  the value DX  despite it  not being a  valid ARRL_SECT
enumeration value. This is done for consistency with N1MM Logger+ ADIF
exports.
 2019-06-24 00:56:41 +01:00
Bill Somerville
3f5a996842
New UDP message SwitchConfiguration(14) to switch to an existing configuration 
The Status(1) message also acquires  the current configuration name as
a new  field. See  NetworkMessage.hpp for  details. The  UDP reference
example program message_aggregator acquires the ability to display and
change  the configuration  of a  WSJT-X client  to exercise  these new
features.
 2019-06-13 01:44:28 +01:00
Bill Somerville
ef21239a9b
Merge branch 'f2008' into release-2.1.0 2019-06-07 17:24:30 +01:00
Bill Somerville
067692cd1e
Disable automatically enabled toolbar on Mac 
Qt automatically adds a "Menu->View->Show Tab Bar" button, this
change disables that as we don't have a tool bar or tab bar.
 2019-06-07 17:21:57 +01:00
Bill Somerville
77094c88bf
Merge branch 'release-2.1.0' into f2008 2019-06-07 17:17:01 +01:00
Joe Taylor
3ff672705f Change the F11/F12 frequency increments for FT4 to +/- 90 Hz. 2019-06-06 14:14:11 -04:00
Joe Taylor
9c3c5d6b3c Turn Tx Enable to OFF after logging a QSO, even if "Clear DX call and grid after logging" is not checked. 2019-06-06 11:58:52 -04:00
Bill Somerville
f346d37fd6
Modernize Fortran interfaces that are called from C/C++ 
Making Fortran  interfaces called from other  languages fully portable
avoids issues with newer Fortran compilers.
 2019-06-06 15:00:47 +01:00
Bill Somerville
45b12e6028
Preparation for UI i18n 
Re-enabling the WSJT-X i18n  facilities. This allows translation files
to  be created  for languages  that are  automatically used  to lookup
translatable strings. To enable a  new language the language name must
be added to the CMakeLists.txt LANGUAGES list variable in BCP47 format
(i.e. en_US,  en_GB, pt_PT, ...). Do  one build with the  CMake option
UPDATE_TRANSLATIONS enabled  (do not  leave it enabled  as there  is a
danger of loosing existing translated texts), that will create a fresh
translations/wsjtx_<lang>.ts file which  should be immediately checked
in with the  CMakeLists.txt change. The .ts should then  be updated by
the translator using  the Qt Linguist tool to  add translations. Check
in the  updated .ts file  to complete the initial  translation process
for that language.

To  aid translators  their WIP  .ts file  may be  tested by  releasing
(using the  lrelease tool or  from the Linguist  menu) a .qm  file and
placing  that  .qm  file  in the  current  directory  before  starting
WSJT-X. The translations will be used if the system locale matches the
file name.   If the system  locale does not  match the file  name; the
language may be  overridden by setting the  LANG environment variable.
For  example if  a wsjtx_pt_PT.qm  file  is in  the current  directory
WSJT-X will use it for  translation lookups, regardless of the current
system locale setting, if the LANG variable is set to pt_PT or pt-PT.

On MS Windows from a command prompt:

 set LANG=pt_PT
 C:\WSJT\wsjtx\bin\wsjtx

elsewhere:

 LANG=pt_PT wsjtx
 2019-06-06 12:56:25 +01:00
Bill Somerville
ca41934b68
Repair an object instance initialization order issue that causes crashes 
The  background  thread  running  the  ADIF log  load  needs  a  valid
configuration object as  it now depends on the  "Include WAE entities"
option.
 2019-06-03 00:35:20 +01:00
Bill Somerville
19c46774b4
Moving toward multiplier and dupe detection for contest modes 
There's not  much to show  for this so far  but some of  the necessary
infrastructure is in place.
 2019-05-30 22:20:09 +01:00
Bill Somerville
381faca99a
Add option to include or exclude WAE extra entities in DXCC entity lookups 
Also  refactored  object  relationships  as a  start  to  implementing
contest multiplier highlighting.
 2019-05-29 23:35:18 +01:00
Bill Somerville
a54140582a
Tidied up cut-off criteria 2019-05-29 20:47:11 +01:00
Joe Taylor
dce016f6eb Disable RC6 during ARRL June VHF contest, Field Day, and after July 21, 2019. 2019-05-28 12:09:34 -04:00
Bill Somerville
67ab7c7b8b
Add Alt+O hotkey to change the operator quickly without going to the Settings dialog 
Thanks to Jim, W2JC, for suggesting this enhancement.
 2019-05-28 12:18:54 +01:00
Joe Taylor
a521000775 No need to test FT4 and FT8 messages for trailing "f" or "d" indicators. 2019-05-24 11:04:30 -04:00
Joe Taylor
d5cd9db696 In FT4 mode, Shift+F11/F12 should move Tx freq by +/- 100 Hz. 2019-05-24 10:42:30 -04:00
Joe Taylor
637d4d0411 "Force Call 1st" must also force AutoSeq. 2019-05-24 08:31:56 -04:00
Joe Taylor
7334ebb20b New user option: "Calling CQ forces Call 1st". 2019-05-23 14:31:08 -04:00
Joe Taylor
dfedc40db1 Fix some timing issues resulting from non-integral m_TRperiod for FT4. 2019-05-23 13:24:35 -04:00
Joe Taylor
8761ccef9b Received data length for FT4 should be 21*3456 = 72576 samples = 6.048 s. 2019-05-23 09:23:58 -04:00
Steve Franke
a9623703b3 FT4: Change Fortran code to NSPS=576 and make necessary accompanying 
changes on the C++ side. Basically works except that Tx audio has
incorrect DT and audio is truncated at the end. Also, command line
decoding using JT9 is not as sensitive as decoding from within WSJT-X.
 2019-05-22 17:02:15 -05:00
Joe Taylor
912e40876a Disable the "not_GA_warning_message", for now. 2019-05-22 13:06:16 -04:00
Joe Taylor
0d3be0128b Change m_TRperiod from qint32 to double. Functional, but needs more testing! 2019-05-22 12:44:28 -04:00
Bill Somerville
1c3b554384 Revert "Log buttons" 
This reverts commit 9e75b5c2b5.
 2019-05-06 22:25:06 +01:00
Bill Somerville
1a914e980b Revert "Add background colour to Log QSO buttons as stronger visual cue" 
This reverts commit a8a1d8d0a7.
 2019-05-06 22:25:01 +01:00
Bill Somerville
27a0182ab7 Revert "Revert to colouring just the OK Log QSO button to help with colour-blindness accessibility" 
This reverts commit b9e194b74f.
 2019-05-06 22:24:51 +01:00
Steve Franke
0d1b438b91 FT4: Fix generation of Tx5 when one callsign is nonstandard. 2019-05-04 09:33:53 -05:00
Bill Somerville
bd07a6e755 Add default QDateTime delegate editor 2019-05-04 01:02:16 +01:00
Bill Somerville
b79cf0df99 Improvements to accessibiity 
Where  tool  tips are  defined  in  rich  text, equivalent  pain  test
accessible descriptions have been added  so that screen readers do not
announce HTML tags.

Refactored date time  delegates to use a simpler default  editor via a
default  item editor  factory for  QDateTime values,  the editor  is a
standard QDateTimeEdit with a format that includes seconds and renders
assuming the time is UTC.

Modified the Cabrillo log and Fox log database table models to provide
QDateTime items  for the edit role  of date time fields,  and formated
date time strings including seconds and assumed as UTC for the display
role.
 2019-05-03 10:21:50 +01:00
Joe Taylor
8104d80998 Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0 2019-04-30 16:03:01 -04:00
Joe Taylor
c7a388f740 Send FT4 audio frequency to PSK Reporter. 2019-04-30 16:02:26 -04:00
Bill Somerville
3916316a1c Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0 2019-04-30 15:43:01 +01:00
Bill Somerville
b9e194b74f Revert to colouring just the OK Log QSO button to help with colour-blindness accessibility 2019-04-30 15:33:01 +01:00
Bill Somerville
b29a6d14ea Workaround for a crash on macOS when compiling with gfortran 8.3 2019-04-30 15:13:26 +01:00
Joe Taylor
b2d6238b63 Fix a bug that caused FT4 to do WSPR band-hopping. 2019-04-30 09:38:20 -04:00
Joe Taylor
1347f523de Allow RRR message in Tx4, in FT4 mode, if not using contest-style messages. 2019-04-30 09:17:34 -04:00
Bill Somerville
a8a1d8d0a7 Add background colour to Log QSO buttons as stronger visual cue 2019-04-30 04:47:30 +01:00
Bill Somerville
7de974a7ee Fix settings acceptance jumping from FT8 to FT4 mode 2019-04-29 19:53:59 +01:00
Bill Somerville
a28402c527 Avoid a crash when Rx samples arrive before wide graph plotter is ready 2019-04-28 22:20:24 +01:00
Steve Franke
3b8b871a7c Disable AP for mycall if more than 5 minutes since last Tx. Used to be 10 minutes. 2019-04-27 16:38:19 -05:00
Steve Franke
dc66304a65 Improve ALL.TXT formatting for JT9/JT65. Thank you to Sandro, IW3RAB, for submitting this fix. 2019-04-26 20:06:32 -05:00
Joe Taylor
a19d82e362 Fix a typo. 2019-04-24 09:30:02 -04:00
Joe Taylor
f308d5246e Make the contest serial number spinner visible, where it should be. 2019-04-23 20:20:45 -04:00
Joe Taylor
dc627cb48c Enable QSO types other than RTTY RU in FT4 mode. 2019-04-23 14:16:55 -04:00
Joe Taylor
eaf567747c Fix the "Tx2 for Tx3" bug when using RTTY RU messages. Needs further testing! 2019-04-22 09:42:28 -04:00
Steve Franke
64bd55910a Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0 2019-04-19 15:14:14 -05:00
Steve Franke
25d07fd574 FT4: Hide AP Enable menu pick --- AP is always enabled, for now. 2019-04-19 15:14:08 -05:00
Joe Taylor
f78a9ec7df Insert June 7 timeout date. 2019-04-19 15:42:37 -04:00
Steve Franke
e8d17a9898 FT4: Subtraction is basically working. 2019-04-18 14:16:39 -05:00
Steve Franke
be72461142 FT4: Some groundwork for subtraction. 2019-04-18 14:15:24 -05:00
Joe Taylor
f7b0e24e70 Correct a flaw in recently modified actions for key F6. 2019-04-17 14:53:20 -04:00
Joe Taylor
5826aefedc Let "Best S+P" status time out after 2 minutes. Update the keyboard shortcuts.txt file. 2019-04-16 13:21:45 -04:00
Joe Taylor
b43d91240d New end-of-QSO sequencing logic (possibly temporary) for CQing FT4 station. 
When RR73 is received we log the QSO, turn "Call 1st" OFF, and call CQ again.
Also, allow Alt+C and F6 (the latter only if altenrate F1-F6 bindings
are active) to toggle "Call 1st" ON/OFF.
 2019-04-15 16:26:41 -04:00
Steve Franke
cd8ea16f40 FT8: Use GFSK waveform with BT=4.0 as reference for subtraction, for now. May want to change to BT=2.0 before v2.1 release? 2019-04-12 17:11:26 -05:00
Joe Taylor
56c1aacbc2 Remove a diagnostic qDebug(). 2019-04-09 22:03:59 -04:00
Joe Taylor
2633f6fb6d Make the label red, not the whole button. 2019-04-09 20:12:48 -04:00
Joe Taylor
2b42650a73 Make the "Best S+P" button red when activated. 2019-04-09 08:48:13 -04:00
Joe Taylor
20bed38323 Best S+P activates only when not transmitting. 2019-04-08 13:18:30 -04:00
Joe Taylor
6e1d5ea1d8 BestSP calls New DXCC as well as New Call on Band. 2019-04-08 12:52:23 -04:00
Joe Taylor
b6032277d0 The "Best S+P" button is now functional. Needs testing! 2019-04-08 12:36:05 -04:00
Joe Taylor
ec97d0410e Possibly temporary: add a "Call Best" button for S+P use in FT4 mode. 2019-04-07 21:08:38 -04:00
Joe Taylor
964c148794 Fix the UTC displayed at left of waterfall in FT4 mode. 2019-04-07 13:36:29 -04:00
Bill Somerville
13e721dfb7 Merge branch 'feat-ft4sync' into develop 2019-04-05 11:26:42 +01:00
Bill Somerville
8d3bb379f9 Merge branch 'release-2.1.0' into develop 2019-04-05 11:15:21 +01:00
Joe Taylor
7f61c7a07b Reactivate the not-GA timneout message, for -rc3. 2019-04-04 16:20:07 -04:00
Joe Taylor
ed80b9c7e4 Remove "TU; " from a double-clicked message before processing it. 2019-04-04 12:47:10 -04:00
Joe Taylor
e49e80ffb7 Enable the "TU; ..." message in FT4 mode. 2019-04-03 13:15:23 -04:00
Joe Taylor
5aba83b9df Fix another minor FT4 flaw. 2019-04-03 11:49:39 -04:00
Joe Taylor
f24d45cb17 Fix a flaw in FT4 auto-sequencing. 2019-04-03 11:13:47 -04:00
Joe Taylor
6ea9f4990d Several tweaks to FT4 simulation and decoding procedures. Now -0.5 < DT < 0.5 2019-04-03 10:13:50 -04:00
Joe Taylor
013c06b6ca Fix a probmel with decoding FT4 from .wav files. 2019-04-03 09:25:32 -04:00
Joe Taylor
c8dae29425 Synchronized FT4 auto-sequencing now works. 2019-04-02 13:27:55 -04:00
Joe Taylor
181e5c7b9d Remove unused code left over from asynchronous FT4 mode. 2019-04-02 13:16:06 -04:00
Joe Taylor
d579e5973e Correct the size of saved FT4 .wav files. 2019-04-02 13:04:40 -04:00
Joe Taylor
fd239d9c07 Clean up some timing issues with time-synchronized FT4. 2019-04-02 11:39:28 -04:00
Joe Taylor
888b5fee28 Make "Tx 1st/Even" visible in FT4 mode. 2019-04-01 14:40:16 -04:00
Joe Taylor
e0d4c94cc1 Some very basic functionality for time-synchronized FT4. 2019-04-01 14:23:10 -04:00
Steve Franke
68308e23aa FT8: Tx waveform will now change (after a short delay) if Tx message is changed after a transmission has started. 2019-03-29 15:30:50 -05:00
Bill Somerville
9e75b5c2b5 Log buttons 2019-03-29 02:54:30 +00:00
Joe Taylor
e3d4a1c3a6 FT4: double-click on a yellow Tx mesage causes re-sending that message. 2019-03-28 13:08:43 -04:00
Joe Taylor
e4ebddcf13 When Tx1 entry is disabled, Tx1 button should also be disabled. 2019-03-28 10:41:56 -04:00
Joe Taylor
1da4809e1b Do not disable double-clicking when m_inQSOwith is populated. (Correct???) 2019-03-28 09:41:38 -04:00
Joe Taylor
e571349c69 In FT4 mode, let the Tx# buttons start a transmission. 2019-03-28 09:30:26 -04:00
Bill Somerville
760e7b1352 Disable expiration and associated nag message 2019-03-22 22:48:17 +00:00
Joe Taylor
665dbd0f78 With Alternate F1-F5 checked, let Ctrl+F1 send the message in Tx1. 2019-03-22 13:52:06 -04:00
Joe Taylor
e38091705b In FT4 mode, let F11 and F12 move Tx freq by +/- 120 Hz. 2019-03-22 10:57:09 -04:00
Joe Taylor
974cf50e16 Red label (ui->labDXped) should disappear in FT4 modeif we leave all contest modes. 2019-03-22 09:24:52 -04:00
Joe Taylor
2f0ff14134 Enable NA_VHF contest messages in FT4 mode. 2019-03-22 08:49:22 -04:00
Joe Taylor
e2db793b5d Don't save .wav files in FT4 mode unless SaveAll is checked. 2019-03-22 08:20:19 -04:00
Joe Taylor
212e4a3c07 Add a timeout message for what will become v2.1.0-rc1. 2019-03-21 12:36:38 -04:00
Joe Taylor
ffb6d3624f In FT4 mode, display only "for us" and Tx messages in right window. 2019-03-21 09:33:37 -04:00
Joe Taylor
3a6e26d645 Clean up the FT4 logic for setting status of labDXped, cbAutoSeq, cbFirst. 2019-03-14 12:03:07 -04:00
Joe Taylor
6a2effcfc6 In FT4 mode, Tx4 is now hardwired to the 'RR73' message. 2019-03-13 13:59:41 -04:00
Joe Taylor
e150d003d6 Fix an inforrect constant in ft4_rx() that skipped over first 0.208 s of Rx data. 2019-03-13 10:31:23 -04:00
Joe Taylor
e9a999cda1 Use the "TU; ..." message when starting another FT4 QSO almost right away. 2019-03-12 11:09:49 -04:00
Steve Franke
7a0823301a Remove some temporary code. 2019-03-09 10:03:01 -06:00
Joe Taylor
69675153a7 FT4 sequencing seems OK now (but needs thorough testing). No "TU;" msgs yet. 2019-03-07 14:36:58 -05:00
Joe Taylor
87826d1a6c Clean up some FT4 code. 2019-03-07 11:21:17 -05:00
Joe Taylor
ff0b6a03a4 Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2 2019-03-05 09:22:08 -05:00
Steve Franke
d7012267c0 CQ message type strings are now passed from mainwindow.cpp to ft4_decode.f90, to enable AP decoding of special CQ messages. 2019-03-04 17:10:57 -06:00
Joe Taylor
89cffbc959 Move the call to processMessage() to correct place in ft4Data(). 2019-03-04 10:11:55 -05:00
Joe Taylor
871ff3892b Use "CQ SCC ..." for Tx6 message if RTTY RU Exch = SCC. 2019-02-28 11:42:28 -05:00
Joe Taylor
6b5131ab5e Trial changes to support messages for Slovenian Contest Club's RTTY-like contest. 2019-02-28 11:21:06 -05:00
Bill Somerville
278c544a6a Merge branch 'develop' into feat-ft2 2019-02-26 11:52:14 +00:00
Steve Franke
fdca7c2dcb Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2 2019-02-25 15:03:55 -06:00
Steve Franke
3759198982 Remove ramp-up and ramp-down symbols. Instead, shape the first 1/8th of first and last real symbols. 2019-02-25 15:03:43 -06:00
Joe Taylor
fdfb655b06 Option to select "Low sidelobes" or "Most sensitive" for waterfall spectra. 2019-02-25 15:04:05 -05:00
Bill Somerville
ad75db3e06 Merge tag 'wsjtx-2.0.1' into develop 
WSJT-X v2.0.1 GA release
 2019-02-25 03:15:56 +00:00
Bill Somerville
c60fbc11b6 Fix samples CMake script and update NEWS and copyright dates 
Preparation for v2.0.1 GA release.
 2019-02-25 03:07:51 +00:00
Bill Somerville
a12e71f352 Merge branch 'master' into develop 2019-02-25 00:44:58 +00:00
Joe Taylor
25bfa3798a Transmit FT8 using a gaussian-filtered waveform. 2019-02-22 13:39:39 -05:00
Joe Taylor
aeddaeab9e FT4 now transmits a waveform generated from Gaussian-filtered frequency changes. 2019-02-21 12:10:27 -05:00
Joe Taylor
57a20f838f Remove the code that builds an ADIF file from FoxQSO.txt. 2019-02-21 10:24:58 -05:00
Joe Taylor
d5a1671210 FT4 decoding interval is now 288 ms. Saving of FT4 files is somewhat rationalized. 2019-02-21 10:08:18 -05:00
Bill Somerville
fd7bca080a Revert to direct Log QSO invocation rather than deferred for Fox logging 
Deferring using a 0mS timer does not work for Fox logging as it may be
invoked  more  than   once  in  a  loop  when   multiple  streams  are
active.  This change  directly  calls the  logging member  function(s)
inside the message processing loop.

This change  was initially  made because  an unhelpful  database query
order along with a need to display the latest logged QSO at the bottom
of the  Fox log table view  was causing GUI unresponsiveness  when the
Fox log table had many rows.  The current implementation shows the Fox
log table view in descending time  order with the latest logged QSO at
the top  which avoids this  unresponsiveness issue (tested with  a Fox
log table with over 15,000 rows).
 2019-02-20 19:40:36 +00:00
Joe Taylor
f1e7b0c30a Add (temporary?) code for converting FoxQSO.txt to an ADIF log. 2019-02-20 10:43:30 -05:00
Joe Taylor
c2cb55a68a Reduce FT4 chunk size fro 500 to 288 ms; suppress duplicate decodes from close to chunk ends. 2019-02-13 14:42:57 -05:00
Bill Somerville
8a1ff9e1a3 Reset QSO start time when aborting a QSO or clearing messages (ESC and F4) 2019-02-13 18:47:31 +00:00
Steve Franke
cbfcb76193 AP decoding basically works. Make data_dir setting work on the Mac. 2019-02-07 18:48:38 -06:00
Steve Franke
71cb6d9f50 Use 4 different Costas arrays to prevent false syncs as received frames move 
through the analysis window.

Add a random 77-bit vector to each message so that tone transitions occur
even if the message contains a long string of 0 or 1 (like a CQ).

Add alternative sync calculation as an option (sync2), for testing.

Add basic framework for AP decoding.
 2019-02-05 19:18:50 -06:00
Bill Somerville
4dfc4685e9 Make the UDP protocol Clear (3) message two-way 
External servers can clear either or  both of the Band Activity and Rx
Frequency decodes windows. This was  requested by Dave, AA6YQ, so that
DX Lab  Suite applications can  clear old  decodes on band  changes to
ensure that decode highlighing is consistent.
 2019-02-03 00:49:35 +00:00
Bill Somerville
846918e3aa Remove normal mouse double-click action for decode display windows 
The normal  action selects the word  under the mouse pointer  and this
disrupts   callsign  highlighting.    Normal  single-click   selection
behaviour is unchanged  so text can still be selected  using the mouse
and copied if desired.
 2019-02-02 20:38:56 +00:00
Joe Taylor
22209030e2 Move files all_ft4.txt and clockit.out to the data_dir directory. 2019-02-01 11:56:08 -05:00
Joe Taylor
04f085bb24 Proper handling of multiple decodes from one call to ft4_decode. 2019-01-31 13:55:21 -05:00
Joe Taylor
a80b955fe7 Decode FT4 over the full frequency range displayed in waterfall. 2019-01-31 12:10:58 -05:00
Joe Taylor
a7ded94313 Saved FT4 files must be at least 5 s long; Shift+F6 now works for FT4 files. 2019-01-29 15:24:08 -05:00
Joe Taylor
e11acde9fb Better handling of calls to ft4_decode(), depending on ring-buffer pointer. 2019-01-29 14:19:22 -05:00
Joe Taylor
3ab7c1edf6 Don't logQSO or transmit in response to a decode from disk. 2019-01-29 13:19:36 -05:00
Joe Taylor
65398bbffa Fix the UTC display on waterfall, for FT4 mode. 2019-01-29 12:12:54 -05:00
Joe Taylor
6d6e2e8314 Don't try to transmit a blank FT4 message! 2019-01-29 11:49:11 -05:00
Joe Taylor
e98231d4c1 Correct the call to genft4(); fix the displayed time for data from disk. 2019-01-29 10:39:34 -05:00
Joe Taylor
7a9240c9ef Basic saving of .wav files for FT4. 2019-01-28 15:58:14 -05:00
Joe Taylor
d5203e2da9 Code cleanup. 2019-01-28 14:20:32 -05:00
Joe Taylor
2e4035c8bb Insert red line on waterfall to mark an FT4 transmission. 2019-01-28 13:50:23 -05:00
Joe Taylor
7da4fc63a6 Add freq markers for FT4 to Wide Graph. Tentative default FT4 freqs for 40m and 20m. 2019-01-28 11:07:52 -05:00
Joe Taylor
6e4f0f32ee Remove FT2; implement basic functionality in FT4. 2019-01-28 10:19:46 -05:00
Joe Taylor
f6e3dbb8e9 Increase the FT2 Tx duration timer from 2200 to 2500 ms. 2019-01-25 16:52:38 -05:00
Joe Taylor
a0ddc1485e Make the ProgressBar invisible in FT2 mode. 2019-01-24 17:29:03 -05:00
Joe Taylor
edf4af5307 Be sure to set start time of QSO. 2019-01-24 15:58:08 -05:00
Joe Taylor
a9100f0291 Log FT2 QSOs when they are finished. 2019-01-24 13:02:47 -05:00
Joe Taylor
e55a8baa25 Minor tweaks to FT2 auto-sequencing and writes to all.txt. 2019-01-24 12:38:02 -05:00
Joe Taylor
c8cdd05f34 Implement auto-sequencing for FT2. 2019-01-24 11:58:57 -05:00
Joe Taylor
3fa7c7b9a7 More work on integrating FT2 (will become FT4?) into WSJT-X. Not finished! 2019-01-23 16:53:03 -05:00
Joe Taylor
14db0d682b Make double-clicking of decodes to work in FT2 mode. 2019-01-23 10:51:26 -05:00
Joe Taylor
50c1daf61f Use a timer to establish length of an FT2 (to be FT4?) transmission. 2019-01-23 10:09:18 -05:00
Joe Taylor
568fc0810e Tx now works, more or less, in FT2 mode. Needs testing! 2019-01-18 16:22:25 -05:00
Joe Taylor
5f03d97a9e Implement basic Rx capability for FT2 in WSJT-X. 2019-01-18 11:51:15 -05:00
Bill Somerville
5137b47c0a Switch off nag window for develop 2019-01-16 20:44:04 +00:00
Bill Somerville
0932ddaba1 Merge branch 'hotfix-2.0.1-rc1' into develop 2019-01-16 20:33:59 +00:00
Bill Somerville
b3d6871786 Minor changes to support Qt versions >=10 2019-01-14 19:47:08 +00:00
Joe Taylor
d8a5d84647 Disable the startup message about upgrading to v2.0. 2019-01-09 09:05:21 -05:00
Joe Taylor
b3a8930eef Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2019-01-09 08:48:22 -05:00
Joe Taylor
e12eabb65f Clear labAz on program startup. 2019-01-09 08:47:29 -05:00
Joe Taylor
5f38d30c75 Add "Erase WSPR hashtable" to the Filemenu. 2019-01-08 15:41:59 -05:00
Bill Somerville
e871860642 Option to always start new decode periods at the top of the Band Activity window 2019-01-08 18:03:43 +00:00
Joe Taylor
9226d0829f Correct a flaw in validating contest exchange data when logging. 2019-01-08 08:40:40 -05:00
Joe Taylor
949c5deda5 Refactor code that writes to ALL.TXT and ALL_WSPR.TXT. Iincludes better formatting. 2019-01-03 12:15:48 -05:00
Bill Somerville
5b0f713cd4 Defer dwonloading LoTW users file until "Settings->Colors->Fetch" button pressed 
This change also repairs a defect in showing potential LoTW users when
the  "Settings->General->Show DXCC,  grid, and  worked before  status"
option is not checked.
 2019-01-01 16:19:01 +00:00
Joe Taylor
90617b29ab Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2018-12-31 10:39:26 -05:00
Joe Taylor
9d0473f1e8 Include grid in Tx1 messages with <hisCall>, such as "<DF2018ARDF> K1JT FN20". 2018-12-31 10:37:36 -05:00
Bill Somerville
8c13df2bc6 Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2018-12-30 12:36:52 +00:00
Bill Somerville
12299957d7 Add Fox log ADIF export to the Fox Log window log table contextual pop up menu 2018-12-30 12:35:41 +00:00
Joe Taylor
8379fa86eb Optional key bindings for F1 through F5, especially for contest use. 2018-12-28 11:19:29 -05:00
Joe Taylor
cabd6bc869 Boost all message letters to upper case, even if tx6 editing is not 'finished'. 2018-12-27 14:44:50 -05:00
Joe Taylor
ba83ae0587 Retain CQ messages like "CQ xxxx K1ABC FN42", where xxxx is 1-4 letters or 1-3 digits. 2018-12-27 13:14:01 -05:00
Bill Somerville
a2ce15d4b1 Allow recevied signal reports from compound calls to be logged 2018-12-23 23:51:48 +00:00
Joe Taylor
c1b1daf9db Allow the logQSO dialog to modify "Rcvd" in NA VHF mode and have the changes flow through to N1MM. 2018-12-20 12:42:39 -05:00
Joe Taylor
9fd64f48de Allow the logQSO dialog to modify "Exch Sent" or "Rcvd" in RTTY mode and have the changes flow through to N1MM. 
Something similar should be done for other contest modes.
 2018-12-20 12:03:22 -05:00
Bill Somerville
d241217737 Add QDarkStyleSheet to Message Aggregator reference application 2018-12-17 01:48:45 +00:00
Bill Somerville
4fbefb9e99 Remove extraneous MainWindow UI element 2018-12-16 01:30:55 +00:00
Bill Somerville
97e04fd7e1 Merge branch 'master' into develop 2018-12-10 18:46:12 +00:00
Bill Somerville
b2cb2e1d2e Repair regression in Log QSO power and comments retention 2018-12-10 18:44:57 +00:00
Bill Somerville
72fef7aa30 Re-enable GA warning 2018-12-10 00:47:31 +00:00
Bill Somerville
784f75ea74 Fix an issue with g++ v8.2 compiles 2018-12-09 22:47:45 +00:00
Bill Somerville
205024f8ef GA release and make initial message show in GA version 2018-12-09 21:18:08 +00:00
Bill Somerville
035b5a2366 Improve v2.0 update announcement formatting across platforms 2018-12-09 01:38:37 +00:00
Steve Franke
5d8e5b0070 restore the return path that was commented out in commit 19fbb95 2018-12-08 12:00:58 -06:00
Steve Franke
19fbb95b8c Comment out some code related to the nextCall facility. 2018-12-08 10:56:29 -06:00
Bill Somerville
e3daedef92 Revert elision of AP information appended to decodes in ALL.TXT 2018-12-06 21:42:37 +00:00
Steve Franke
ed90b56819 cmath is needed 2018-12-06 11:11:57 -06:00
Joe Taylor
8134c334cb Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-12-06 11:11:06 -05:00
Joe Taylor
0ae8cade5e Fix a typo. Remove the RC timeout. 2018-12-06 11:10:09 -05:00
Bill Somerville
cf244660cd Removed unnecessary diagnostic print 2018-12-06 15:39:21 +00:00
Bill Somerville
7cd7989f45 Fix line ending handling when processing decodes 2018-12-06 15:34:46 +00:00
Bill Somerville
bf87499635 Fix truncation of non-FT8 decoded messages in ALL.TXT 2018-12-06 14:04:14 +00:00
Bill Somerville
b8e4517718 Improve performance of Fox and contest log view windows 
This include inverting  the order of table view rows  so the newest is
at the top, without that the Qt MVC interactions when using a database
table based model is too slow and complex to manage.

The table views  now have sort by column capability  in the normal way
(click column  header to  reverse sort order)  for timely  logging and
non-disruption  of  Tx  starts  the  log  view  should  be  sorted  in
descending time order and scrolled to the last row added. Without that
Fox and  contest logging will work  but serious delays may  be invoked
that disrupt operation.
 2018-12-06 05:41:16 +00:00
Bill Somerville
1c48b39b58 Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-12-06 02:18:24 +00:00
Joe Taylor
cc773b6586 Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-12-05 15:55:43 -05:00
Joe Taylor
044a126278 Proposed wording for the v2.0 GA startup message. 2018-12-05 15:54:42 -05:00
Steve Franke
c8853cb90c Use regex to decide how the GUI formats the Tx messages for subsequent packing by packjt77. Ensure that C4XMAS is properly flagged as a non-standard callsign. 2018-12-05 13:47:36 -06:00
Steve Franke
a5e82ac94c Delete an unused routine. Fix a typo in a comment. 2018-12-04 20:01:55 -06:00
Bill Somerville
041df48e96 Fix issues with auto scrolling log winddows to the last added row 2018-12-04 01:49:36 +00:00
Bill Somerville
025a0161f8 Add special operation mode enumeration to UDP status message 
Also  updated  the  message_aggregator UDP  reference  application  to
exercise this field.
 2018-12-02 23:19:08 +00:00
Bill Somerville
59fc83455d Add contest exchange send and received fields to UDP logged QSO message 
Updated  message_aggregator and  udp_daemon reference  applications to
exercise this change.
 2018-12-02 10:09:37 -05:00
Bill Somerville
fdb59cf6e9 Fix a cardinality issue in the contest and Fox log windows for the Band column 
Foreign  key  relationship  with  the Bands  model  should  have  been
many-to-many instead of one-to-many.
 2018-12-02 03:37:56 +00:00
Bill Somerville
94bbe52c73 Fixes several QDateTime time spec issues that effected contest logs and Cabrillo exports 2018-12-01 13:16:57 -05:00
Joe Taylor
d08ee43fc6 Set m_mode_Tx="JT9" when mode is switched to JT9. 2018-11-30 15:52:11 -05:00
Joe Taylor
d857f7745c Revert "Trial code for assigning F1 - F5 to contesting use." 
This reverts commit c8aee58fe0.
 2018-11-30 12:20:06 -05:00
Joe Taylor
53c458a42c Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-11-30 11:51:34 -05:00
Joe Taylor
c8aee58fe0 Trial code for assigning F1 - F5 to contesting use. 2018-11-30 11:50:44 -05:00
Bill Somerville
cf6311e007 Scan ADIF log asynchronously and new settings button to rescan ADIF log 2018-11-30 16:26:46 +00:00
Bill Somerville
fca4cccfc4 Make sure T/R period progress bar doesn't obscure temporary status messages 2018-11-30 16:03:20 +00:00
Joe Taylor
1fda18108c Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-11-29 09:07:35 -05:00
Bill Somerville
7113d58fb9 Use the QSO end time from the Log QSO dialog for the contest log records 2018-11-29 02:31:08 +00:00
Bill Somerville
e5b17e270c Improved decode highlighting 
Add  "Settings->Colors->Decode Highlighting"  context menu  buttons to
unset b/g  and f/g colours.  Add colour value  as #rrggbb or  unset in
text  to list  items.  Improved colour  assignment  to decodes  giving
better and more intuitive behaviour.
 2018-11-29 01:03:44 +00:00
Joe Taylor
cd56c2a840 Improved wording and formatting of startup message. 2018-11-28 09:20:43 -05:00
Joe Taylor
9bf2d9a553 Make sure that m_modeTx="JT65" when switching to JT65 mode. 2018-11-27 16:04:21 -05:00
Joe Taylor
56f91cfcbb Message with RR73 is not permissible in MSK144 with Sh enabled. 2018-11-27 15:06:56 -05:00
Joe Taylor
588d429c24 Merge branch 'hotfix-2.0.0-rc5' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc5 2018-11-26 08:54:18 -05:00
Bill Somerville
4dbba727ec Explicitly include MOC generated source 2018-11-26 01:42:57 +00:00
Bill Somerville
4334c997ee Add tool tips to log view windows 2018-11-25 22:30:28 +00:00
Bill Somerville
db51726da2 Move Fox log reset action to Fox log window context menu and allow deletes of QSOs 
Move to OnRowChange edit strategy for log tables so that deletes from
view can be implemented cleanly.

Improve layout of log view tables by resizing to contents.
 2018-11-25 22:19:41 +00:00
Bill Somerville
314d8a645b Replace deprecated Qt algorithms with C++ Standard Library equivalents 2018-11-25 22:13:15 +00:00
Bill Somerville
49b87fb5a6 Merge branch 'hotfix-2.0.0-rc5' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc5 2018-11-24 21:26:49 +00:00
Joe Taylor
ef053e5a9f Protect against execution of on_pbTxMode() when not in "JT9+JT65" mode. 2018-11-24 09:09:50 -05:00
Bill Somerville
c81b3c8e65 Validate contest QSO details before allowing logging 
Basic  validation, must  have  non-empty exchange  sent and  received.
Abstracted log view window widget  behaviour into a base class. Turned
on  auto  resize  to  row  height in  log  view  windows  and  enabled
alternating colours. Convert  empty fields to NULL  when inserting new
log table  rows to signify missing  data. Trap insert row  errors when
adding  to contest  log table  so  that logging  can be  held back  if
constraints are not met. Re-factored  log QSO processing to try insert
row into log table  first and pop up a message  box if constraints are
not met, this pops  up the Log QSO window in case  it was initiated by
an auto log event.
 2018-11-23 01:18:39 +00:00
Bill Somerville
8fce78473f Switch to .cbr as the default Cabrillo file extension 
Should help to avoid accidents with  other .log extension files in the
WSJT-X log files directory.
 2018-11-20 23:47:29 +00:00
Joe Taylor
636bc59c7c Merge branch 'hotfix-2.0.0-rc5' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc5 2018-11-20 07:57:34 -05:00
Bill Somerville
6f966f613d Display and export contest log times in UTC, not local time 2018-11-19 21:18:41 -05:00
Joe Taylor
e835adbc1a Dsable ToolTip on lbNextCall. Add text to the startup message box. 2018-11-19 09:15:37 -05:00
Steve Franke
c4d4097bb3 Tweak a tooltip to remove reference to type 2 callsigns. 2018-11-17 07:19:08 -06:00
Joe Taylor
c3ba6b83b9 Add "No own call decodes" checkbox for WSPR mode. 2018-11-16 09:30:40 -05:00
Joe Taylor
dd28dd2670 Remove the Mouse Timer. Make the AutoSeq checkbox sticky, again. 2018-11-14 11:33:46 -05:00
Bill Somerville
875c308d52 Merge tag 'wsjtx-2.0.0-rc4' into develop 
Tagging the WSJT-X v2.0.0 RC4 release candidate
 2018-11-12 22:19:15 +00:00
Bill Somerville
552df2d520 Revert the message averaging window to it's original single personality 2018-11-12 22:03:39 +00:00
Bill Somerville
26438d59e6 Merge branch 'hotfix-2.0.0-rc4' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc4 2018-11-12 19:12:25 +00:00
Bill Somerville
6fdad18201 Let Fox and Hound decodes flow to UDP message channel 2018-11-12 19:10:12 +00:00
Bill Somerville
6caa77b166 Stop show of contest log window when leaving a special operaation mode 2018-11-12 19:08:02 +00:00
Joe Taylor
af53806081 Correct the RC4 timeout message to read December 31, 2018. 2018-11-12 13:04:46 -05:00
Joe Taylor
c2abf53a0e JT65 Sh mode can send RRR, but not RR73. 2018-11-12 12:56:20 -05:00
Joe Taylor
b240e60d7d Don't let unchecking the Sh box make Auto-Seq available in JT65 mode. 2018-11-12 12:52:20 -05:00
Joe Taylor
f850b09315 Merge branch 'hotfix-2.0.0-rc4' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc4 2018-11-12 12:29:22 -05:00
Joe Taylor
9cfb6613aa For now, allow auto-sequencing only for FT8 and MSK144. 2018-11-12 11:58:16 -05:00
Bill Somerville
be7c40d45f Remove redundant ExchangeValidator class as now done by a regexp validator 2018-11-12 16:05:10 +00:00
Joe Taylor
e14fbd2fd0 Expand 22-bit messages to 37 bits. This fixes the double-click failure. 2018-11-12 10:29:26 -05:00
Bill Somerville
b2b56bbd90 Fix Fox log window item delegate to column mapping 2018-11-12 15:10:17 +00:00
Bill Somerville
3b26b40d81 Add new CabrilloLogWindow widget and integrate it into the application 2018-11-12 04:44:03 +00:00
Bill Somerville
df4dbd546b Add new CabrilloLogWindow widget to display/edit running contest log 2018-11-12 04:13:23 +00:00
Bill Somerville
dd931c490f Save and restore contest serial number between sessions 2018-11-12 04:09:27 +00:00
Bill Somerville
13c023f35d Refinements to the FoxLogWindow widget 2018-11-12 04:06:26 +00:00
Joe Taylor
682170ae54 Remove the restriction on double-clicking while transmitting. 2018-11-10 09:35:18 -05:00
Joe Taylor
d42fb7db39 Don't use "CQ HUND", it was a bad idea. 2018-11-09 16:27:24 -05:00