Commit Graph

1214 Commits

Author SHA1 Message Date
Joe Taylor 2dea222233 Default CQ nnn freq should be 260.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7821 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-09 14:16:09 +00:00
Joe Taylor c624da187d Shift+F11/F12 to move Tx Freq down/up to 50Hz rounded increments.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7820 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-09 13:40:54 +00:00
Bill Somerville 6c29f3d4b8 Add date and seconds to all transmit message log entries
ALL.TXT and ALL_WSPR.TXT

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7817 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-08 18:44:42 +00:00
Joe Taylor 3d9409dd65 Fix freq sent to PSRreporter for modes with short sequences. Thanks to Sandro, IW3RAB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7816 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-08 16:10:23 +00:00
Joe Taylor a0acb0607d Re-commit 7806 and 7807, but disable AP decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7814 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-08 14:06:48 +00:00
Joe Taylor 891ac881af Fix double-display of FT8 and MSK144 decodes in right window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7813 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-08 13:05:44 +00:00
Joe Taylor 5f88f18f50 For 0000 UTC on July 8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7812 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 23:53:11 +00:00
Bill Somerville 94cec5bdc1 IARU region specific working frequencies
Working  frequencies can  be for  all regions  or for  individual IARU
regions. This allows each mode band  tuple to have one or more working
frequencies which  can include local  ones only offered when  the user
configures their IARU region.

Change  working  frequency  default   suggestions  to  better  fit  in
FT8. General  rule is FT8  is at JT65 -2kHz  except where that  is not
possible e.g. where  that would fall into a segment  not allocated for
narrow band data modes. For tight  bands like top band sqeeze existing
JT65 and JT allocations to allow space for FT8.

NOTE: this change changes the WSPR frequency on 80m to allow access to
JA stations that currently have no allocation where it was placed.

ALSO NOTE: the JT65 and JT9 frequencies for 80m move down 6 kHz, again
to  accommodate region  3  users. Other  appliactions  not within  our
control should be asked to move in step when 1.8.0 is released.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7810 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 23:11:41 +00:00
Joe Taylor a0ea5dc8eb Temporarily back out r7806 and r7807.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7808 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 21:40:28 +00:00
Steven Franke cdfd224974 Add basic ap functionality. Needs testing for decoding speed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7806 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 20:24:00 +00:00
Joe Taylor 5e0265a5ab Minor tweaks to FT8 decoder, including norder=3 if ndepth=3.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7805 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 15:27:15 +00:00
Joe Taylor d77ce86ddb Patch from W9MDB: fixes QSO start times in certain situations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7804 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 13:13:22 +00:00
Joe Taylor 51f42eee6c Patch from W9MDB: add even/odd shortcuts, make F1-F3 work when menus are hidden.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7803 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 13:08:48 +00:00
Joe Taylor 34070d107d Patches from G3WDG to ease use of single-tone messages in QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7801 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 12:38:16 +00:00
Joe Taylor 6a9ee81eec Correct the logic for hotkey CTRL+Key_Minus.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7798 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 20:28:12 +00:00
Joe Taylor a728f045a2 Decodes at QSO freq to right window in FT8 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7795 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 19:21:55 +00:00
Joe Taylor 4f22923bbf Correct NSPS in the GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7791 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 16:27:22 +00:00
Joe Taylor 028e2ae2ba Extend FT8 Rx interval slightly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7790 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 16:12:32 +00:00
Joe Taylor aaeb59544c Add an FT8 warning message.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7785 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 13:59:31 +00:00
Joe Taylor 52d8324382 Baseline code with nsps=2048 in FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7783 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 12:07:17 +00:00
Joe Taylor a65061cdde Correct the save/restore behavior of hiding menus and controls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-04 14:39:07 +00:00
Joe Taylor e1b2bdef06 Fix a time delay introduced in refspectrum.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7778 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-03 15:21:38 +00:00
Joe Taylor 42ec06c9e1 Add checkBoxes to (potentially) replace the CTRL+M commands for minimizing window sizes. Suggestions for better positioning, etc, are welcome.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7769 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 19:05:52 +00:00
Joe Taylor c61d328300 Remove a qDebug() flagging posts to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7758 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 13:37:29 +00:00
Bill Somerville 2687a308d6 Smarter Tx sequencing that allows for CAT processing latency
When using  split operating and/or rig  mode setting there is  a delay
before PTT  is asserted  while the CAT  commands are  processed. There
will even be  a small delay if  CAT is only used for  PTT. This change
waits for these  commands to be completed before starting  the user Tx
delay specified in the settings.

There is  a notable exception to  this in that DX  Lab Suite Commander
does not give us a way of knowing when CAT commands have actually been
completed.   This combined  with  the way  that  Commander spaces  CAT
commands, rather  than being paced  by the rig's CAT  responses, means
that delays of more than 1 second are likely. As most rigs suffer some
sort of ALC overshoot when PTT is asserted with audio already present,
it is strongly recommended not to use  the DX Lab Suite Commander as a
rig control proxy if your rig may  suffer ALC overshoot and you use an
external PA. Please note that using a typical RF power meter to detect
ALC  overshoots is  unwise  as  they are  rarely  fast  enough. It  is
probably wise to assume that all rigs suffer ALC overshoot since it is
very difficult to design an ALC loop that avoids it.

This change  also increases  the range of  the "Settings->Advanced->Tx
Delay" spin box to 0s up to 2s.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7756 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 00:19:58 +00:00
Joe Taylor f6ecfec363 Add some timer calls; fix reporting of FT8 spots to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-30 20:11:07 +00:00
Joe Taylor d94effcf41 Make FT8 available to all users, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 15:16:02 +00:00
Joe Taylor e20bd5eae1 Don't execute AutoSeq steps after sending a 73.
For FT8 mode:
  1. Open LU 13 in the proper way.
  2. Disable diagnostic LU 51.
  3. Add keyboard shortcuts CTRL+Plus, CTRL-Minus, to adjust audio Tx frequency
     in even 50 Hz steps.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7749 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 13:42:24 +00:00
Bill Somerville 7e77fb70bc Remove code that attempts to maintain on-air frequency for small QSYs
This feature is of limited  benefit and causes unexpected behaviour on
rigs with lower than 1Hz resolution. Removed for simplicity.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7743 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-28 01:54:35 +00:00
Joe Taylor 7e62880e2a More tweaks to GUI for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7740 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 13:36:10 +00:00
Joe Taylor 023fceb620 Correct the displayed UTC for FT8 decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7739 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 23:45:19 +00:00
Joe Taylor 8b6f3d8920 Fix behavior of RxFreq in FT8 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7738 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 19:33:26 +00:00
Joe Taylor 91fbeff072 Many GUI adjustments for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 15:24:56 +00:00
Steven Franke 273e8de689 Restore normal Fast MSK144 transmission after toggling Fast box and/or after returning to MSK144 from FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-20 02:48:30 +00:00
Joe Taylor 5a9fdd1f34 Implement Tx for FT8. Not tested!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7730 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-19 20:38:03 +00:00
Joe Taylor de3e975b98 1. ft8sim now generates 25 signals: f=300, 400, ... 2700 Hz.
2. ft8d is now a bare-bones multi-decoder.
3. wsjt-x now includes the bare-bones multi-decoder for FT8.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7729 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-19 20:15:43 +00:00
Joe Taylor 3ba80279ec Start a framework for FT8 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 15:55:30 +00:00
Joe Taylor bb21ca949c Starting to insert FT8 into GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7726 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 13:48:45 +00:00
Joe Taylor e53689b755 Back out the experimental changes of r7709.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7710 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-09 11:56:51 +00:00
Joe Taylor b2873010cb Try making JT9C into a 15 s mode. Tx only is now implemented -- and not tested.
DO NOT USE ON THE AIR!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7709 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-08 19:54:37 +00:00
Joe Taylor 00719daac4 Working on a possible (and experimental!) slow MSK144 mode. *** DO NOT USE ON THE AIR! ***
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7707 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-07 19:58:25 +00:00
Bill Somerville e6150df623 Proper custom spin boxes for frequency tolerance and T/R period
These were using a hijacked custom spin box that was designed only for
letters i.e. submodes. Now there are two new custom spin boxes.

HistedSpinBox:- can  be set with  a list  of integer values  which the
step  up and  down  will  follow. Optionally  limits  the maximum  and
minimum value  to the upper and  lower bounds of the  values set. Note
that intermediate values are still valid.

RestrictedSpinBox:- more like a combo  box because the provided values
are the only ones that can be set.

HintedSpinBox   is    used   for    the   frequency    tolerance   and
RestrictedSpinBox is used for T/R period.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7698 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-27 20:04:44 +00:00
Joe Taylor bddcc32de0 Ensure correct text-window labels after changing mod4es.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7694 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-20 19:41:38 +00:00
Joe Taylor 9338cb52bb Correct the real-time filename being sent to wspr_fsk8d.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7693 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-19 15:52:48 +00:00
Joe Taylor 9e1a46f55d Fix the behavior of WSPR-LF (-fsk8) for real-time decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7690 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 20:02:32 +00:00
Joe Taylor 9458acb01b Limit WSPR-LF frequency search range to 1600-1650 Hz. Enable S/N degradation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7689 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 15:59:30 +00:00
Joe Taylor fdad9be46d Fix an incorrect constant.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7688 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 02:21:39 +00:00
Bill Somerville ed80f240e9 Add temporary simpler Tx scheduler for WSPR-LF
Until the advanced band hopping scheduler is upgraded to work with T/R
periods other  than 2  minutes this scheduler  uses a  strictly random
scheduler, except  that Tx percentages  less than 40 defer  Tx periods
that would otherwise be consecutive.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7687 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 01:52:30 +00:00
Joe Taylor ec0278690c Fix the Tx duration in WSPR-LF (8-FSK) mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7685 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-17 14:43:16 +00:00
Joe Taylor 303eecdfd6 Make wspr_fsk8d search for DT as well as f0.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7681 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-17 13:13:11 +00:00