Commit Graph

279 Commits

Author SHA1 Message Date
Joe Taylor
3867c452e6 Changes to GUI to accommodate QRA66. It's basically functional, I think. 2020-08-01 12:13:49 -04:00
Joe Taylor
c4ef1e3e25 Starting on a decoder for QRA66. Now have found xdt and f0 from the sync vector. 2020-07-31 16:38:21 -04:00
Bill Somerville
a7223a5efa
A few more cosmetic 240 -> 4 changes 2020-07-23 19:13:05 +01:00
Steven Franke
085e63e05d Rename fst240 to fst4 in Fortran routines. 2020-07-23 12:48:50 -05:00
Joe Taylor
159b8a97f7 Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used. 2020-07-19 13:20:41 -04:00
Joe Taylor
f61cb1dcbd Better display format for w50 with plotspec. 2020-07-15 16:03:36 -04:00
Joe Taylor
b3882a93c0 Extend write_ref() to compute freq offset and Doppler spread. Also some minor code cleanup. 2020-07-15 15:50:17 -04:00
Joe Taylor
185cf3eb48 "Also FST240W" should set iwspr=2, not 1. Change ndeep to ndepth, for consistency. 2020-07-02 13:30:18 -04:00
Joe Taylor
f2c3cbf9ac Implement basic functiionality of FST240W in the GUI. 2020-07-01 12:01:47 -04:00
Joe Taylor
22b782a4ae Can now decode FST240W signals from WSJT-X, using FST240 and the option "Decode -> Also FST240W". 2020-06-30 20:04:44 -04:00
Joe Taylor
ae54c80a54 Here's a start on GUI changes to support FST240W as well as FST240. 2020-06-30 17:14:58 -04:00
Joe Taylor
d7448347e5 Install a basic framework for handling FST240W decodes. 2020-06-30 15:11:36 -04:00
Joe Taylor
83fddb1f57 Pass more parameters to fst240_decode(). 2020-06-29 12:21:34 -04:00
Steven Franke
390884268c Wholesale change from FST280 to FST240 2020-06-27 08:53:11 -05:00
Joe Taylor
ad4fac6b3d Implement "Single decode" for FST280. 2020-06-21 10:33:36 -04:00
Joe Taylor
f8d7489b4e Fix many odds & ends for merging FST280 properly into the GUI. 2020-06-20 13:47:32 -04:00
Joe Taylor
d64e266e8f Pass submode (==> hmod) to fst280_decode.f90. 2020-06-19 09:15:00 -04:00
Joe Taylor
5569700980 Send nutc to the fst280 decoder, and use it. Also some code cleanup. 2020-06-18 19:53:49 -04:00
Bill Somerville
402ce1b3fb
Enable passing decodes back to caller 2020-06-18 23:33:36 +01:00
Joe Taylor
72005888ac Starting to implement callback routine fst280_decoded. Not yet functional! 2020-06-18 13:37:49 -04:00
Joe Taylor
5c3a340f72 Pass TRperiod (s) to fst280_decode(). 2020-06-17 19:58:21 -04:00
Joe Taylor
5aeaf5dc78 Include h=8 and NSS=40 in the FST280 decoder. 2020-06-17 14:17:03 -04:00
Joe Taylor
81c0548919 Add a dummy fst280 decoder. 2020-06-17 11:50:28 -04:00
Joe Taylor
af9f7b21c0 Starting to implement FST280 decoder. Make Rx sequences behave as desired. 2020-06-17 10:56:18 -04:00
Joe Taylor
c92699531c Correct the record length submitted to JT4 decoder when newdat is false. 2020-05-08 10:57:45 -04:00
Joe Taylor
399b0caafe Enable "Decode after EME delay" for FT8. (Let the 1296 MHz EME guys play with FT8.) 2020-05-06 11:43:52 -04:00
Joe Taylor
4379ef9627 Fix a flaw in the new test logic. 2020-04-25 12:10:32 -04:00
Joe Taylor
f4811845cb Add a feature for testing: simulate responses from another station. 2020-04-25 11:53:20 -04:00
Joe Taylor
35eb391e23 Clean up the formation and display of JT4 average and DS decodes. 2020-04-17 12:14:43 -04:00
Joe Taylor
c188f8ee89 More cleanup of the display of special JT65 decoding modes: avg, deep, AP. 2020-04-09 13:56:35 -04:00
Joe Taylor
0390791090 Fix some problems with message averaging, etc., in JT65 with VHF features enabled. Needs further testing! 2020-04-08 16:56:28 -04:00
Joe Taylor
fcc7739cb9 Correct an error in decoder.f90, introduced yesterday. 2020-03-20 10:11:08 -04:00
Joe Taylor
7cc81d800f More code cleanup. 2020-03-19 15:53:44 -04:00
Joe Taylor
7de6b8c98d Remove diagnostic writes. Don't save .wav files if "Save None" is selected. 2020-03-19 14:46:41 -04:00
Joe Taylor
0a076e0455 Silence compiler warnings. 2020-03-19 11:00:21 -04:00
Joe Taylor
4fa3ee3437 Silence compiler warnings. 2020-03-19 10:43:45 -04:00
Joe Taylor
5e94de71fd Use tseq rather than ipc1 as test for early bailouts. 2020-03-16 12:11:56 -04:00
Joe Taylor
3962aa3c43 Replace hijacked ss(1:3,1) with a separate ipc(3) array. 2020-03-15 14:25:56 -04:00
Joe Taylor
8151816c84 Change formats of diagnostic writes so that GUI and Fortran output can be sorted together. 2020-03-13 11:25:22 -04:00
Joe Taylor
8e7685ea36 Do not alolow bailouts when data were read from disk. 2020-03-12 15:07:56 -04:00
Joe Taylor
0d535f24fb Move the AA and CC diagnostic writes from jt9a() to decoder(). Add ndecodes to BB and CC. 2020-03-12 14:31:02 -04:00
Joe Taylor
199ff3dd3d Experimental work-around for FT8 decoding on slow computers. Important changes:
- don't start function decode() is decoder is already busy
  - send updated m_ihsym to jt9[.exe] via ss(1,1).  Bill won't like this!
  - jt9 bails out of the 41-buffer pass at m_ihsym=45.
2020-03-10 16:26:42 -04:00
Joe Taylor
431ec50212 Progress toward decoding at 41/47/50 buffers. Not yet complete! 2020-03-05 15:37:31 -05:00
Joe Taylor
cd9efc54ea Correct the reported value "ndecoded" for FT8 mode. 2020-03-03 15:18:25 -05:00
Joe Taylor
6c1efac576 Once more, to get the <DecodeFinished> behavior right for realtime monitoring as well as data from disk. 2020-02-28 15:45:51 -05:00
Joe Taylor
8e7a56634b Set nearly=41; don't write <DecodeFinished> after the early decode pass. 2020-02-28 15:03:39 -05:00
Joe Taylor
ecb09ba852 Revert "Send "<DecodeFinished>" for FT8 only after the full-length decoding pass."
This reverts commit 364db768db.
2020-02-14 17:44:46 -05:00
Joe Taylor
364db768db Send "<DecodeFinished>" for FT8 only after the full-length decoding pass. 2020-02-14 11:49:07 -05:00
Joe Taylor
4a4864d2ae FT8 early decoding is now working. 2020-02-13 15:05:37 -05:00
Steven Franke
70b84478f0 Add WW_DIGI to the special activities section. Make necessary changes to
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
2020-01-24 11:26:36 -06:00