Joe Taylor
428bb96ce8
Temporary commit to help in finding a bug.
2020-04-22 11:34:06 -04:00
Joe Taylor
8253f359bc
First cut at auto-sequencing for the new-style EU VHF Contest messages.
2020-04-21 15:50:27 -04:00
Bill Somerville
f286a24710
Ensure that break lines are printed when decoder is aborted
...
This change also moves some other decode finished logic into
MainWindow::decodeDone().
2020-04-18 00:22:07 +01:00
Joe Taylor
75f0e40e8a
Make "Hold Tx Freq" invisible in JT4, QRA64, and JT65/VHF.
2020-04-17 16:10:47 -04:00
Joe Taylor
35eb391e23
Clean up the formation and display of JT4 average and DS decodes.
2020-04-17 12:14:43 -04:00
Joe Taylor
800ed045b6
Remove some obsolete, commented-out code.
2020-04-15 13:41:45 -04:00
Joe Taylor
dc71fd70d5
Stated WSPR power levels below 0 dBm are not allowed. Remove them from TxPowerComboBox.
2020-04-14 12:12:53 -04:00
Joe Taylor
b6e2fa82c0
Update copyright notice to 2020.
2020-04-10 11:19:42 -04:00
Joe Taylor
c188f8ee89
More cleanup of the display of special JT65 decoding modes: avg, deep, AP.
2020-04-09 13:56:35 -04:00
Joe Taylor
0390791090
Fix some problems with message averaging, etc., in JT65 with VHF features enabled. Needs further testing!
2020-04-08 16:56:28 -04:00
Joe Taylor
9d2b2b1a56
Maintain visibility of AvgMsg window when it has been activated.
2020-04-08 10:56:11 -04:00
Joe Taylor
d69da851c1
Fix the 'OO O' display problem for some JT65 decodes.
2020-04-07 18:26:30 -04:00
Joe Taylor
c46ec025e0
For "D4C/B HK76": Make FT8 beacon transmissions only at top of a UTC minute.
2020-04-07 09:39:48 -04:00
Steven Franke
3f7b06853e
Make wspr work again.
2020-03-21 14:44:17 -05:00
Joe Taylor
a39470cb6f
FT4 should always use RR73 in Tx4.
2020-03-20 09:32:02 -04:00
Joe Taylor
fe33bcdd6c
More cleanup after making "Save None" mean NO SAVING AT ALL.
2020-03-19 15:41:18 -04:00
Joe Taylor
7de6b8c98d
Remove diagnostic writes. Don't save .wav files if "Save None" is selected.
2020-03-19 14:46:41 -04:00
Joe Taylor
d4d37c49ab
Silence compiler warnings.
2020-03-19 12:04:56 -04:00
Joe Taylor
7564301209
Silence compiler warnings.
2020-03-19 11:43:22 -04:00
Joe Taylor
aff8229fef
For non-FT8 modes, reset m_nDecodes to 0 after receiving <DecodeFinished>.
2020-03-17 14:39:15 -04:00
Joe Taylor
2653626d45
Replace the changes I removed by executing 'git reset HEAD~'.
2020-03-16 10:27:22 -04:00
Joe Taylor
3962aa3c43
Replace hijacked ss(1:3,1) with a separate ipc(3) array.
2020-03-15 14:25:56 -04:00
Bill Somerville
46638f6f07
Add shared memory synchronization to make access safe
2020-03-15 00:25:35 +00:00
Joe Taylor
649a79dfc1
New IPC trial: use shmem instead of .start .stop .quit files.
2020-03-14 17:06:54 -04:00
Bill Somerville
523e9a1a07
Enhanced process control for jt9 executable
...
The wsjtx process creates control files .start, .stop, or .quit and
the jt9 process deletes them. This is intended to avoid any race
conditions that get the processes out of sync.
2020-03-14 00:01:54 +00:00
Joe Taylor
ebf4952c7c
Auto-clear of hung decoder status.
2020-03-13 14:25:12 -04:00
Joe Taylor
8151816c84
Change formats of diagnostic writes so that GUI and Fortran output can be sorted together.
2020-03-13 11:25:22 -04:00
Joe Taylor
fedb72a38c
Set m_nDecodes=0 only after the 50-buffer decode pass.
2020-03-12 16:52:19 -04:00
Joe Taylor
afe0262ec9
Previous commit message should have mentioned number of decodes is now displayed on status bar.
2020-03-12 15:11:20 -04:00
Joe Taylor
8e7685ea36
Do not alolow bailouts when data were read from disk.
2020-03-12 15:07:56 -04:00
Joe Taylor
6e308f0018
More attempts to diagnose or fix the FT8 "hung decoder" issue.
...
On the Fortran side:
- For the nzhsym=41 activation, bail out if m_ihsym reaches 45
- For the nzhsym=47 activation, bail out if m_ihsym reaches 48
- Change the format and content of what's written to fort.71
- Change msdelay from 10 to 1
In mainwindow.cpp:
- change format and content of what's written to qDebug
- always start FT8 decoder at m_ihsym = 41, 47, and 50
2020-03-12 12:33:34 -04:00
Bill Somerville
6a7263dc94
Add escape route from retries of IPC errors
2020-03-11 22:38:41 +00:00
Bill Somerville
c58a690bf1
Add error checking to jt9 process control by .lock/.quit files
2020-03-11 22:26:41 +00:00
Joe Taylor
4d9c9e08e2
If 47-buffer call takes too long, start the 50-buffer call late.
2020-03-11 16:03:51 -04:00
Joe Taylor
d69cb49e9a
Diagnostic writes to fort.71 in jt9a.f90.
2020-03-11 14:02:19 -04:00
Joe Taylor
199ff3dd3d
Experimental work-around for FT8 decoding on slow computers. Important changes:
...
- don't start function decode() is decoder is already busy
- send updated m_ihsym to jt9[.exe] via ss(1,1). Bill won't like this!
- jt9 bails out of the 41-buffer pass at m_ihsym=45.
2020-03-10 16:26:42 -04:00
Joe Taylor
592f4eea71
Remove a qDebug() call.
2020-03-09 15:29:57 -04:00
Steven Franke
f2266c3c54
1. subtractft8: on the last call to sqf, don't need to do the long FFT.
...
2. mainwindow.cpp: based on the time when <DecodeFinished> is received, calculate
mswait to try to place the killFile time at 0.75*m_TRperiod.
2020-03-06 11:06:44 -06:00
Joe Taylor
431ec50212
Progress toward decoding at 41/47/50 buffers. Not yet complete!
2020-03-05 15:37:31 -05:00
Steven Franke
6773768586
Clean up the timestamp adjustment logic, and make the threshold 0.5*TRperiod.
2020-03-05 11:25:49 -06:00
Steven Franke
07c753e284
Make ALL.TXT Rx timestamp equal to the beginning of the TR period, even if the decode comes in after the start of the next TR period. Make Tx timestamp the actual time that Tx started.
2020-03-05 11:16:56 -06:00
Joe Taylor
8e7a56634b
Set nearly=41; don't write <DecodeFinished> after the early decode pass.
2020-02-28 15:03:39 -05:00
Joe Taylor
b9888a09ff
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-26 13:16:12 -05:00
Joe Taylor
6afff5821e
Correct the times written to ALL.TXT when decode occurs after the T/R boundary.
2020-02-26 13:15:22 -05:00
Steven Franke
0ca6cbb575
wsprd: improve decoding and reduce the number of false decodes
...
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
2020-02-25 10:48:38 -06:00
Joe Taylor
4a4864d2ae
FT8 early decoding is now working.
2020-02-13 15:05:37 -05:00
Steven Franke
70b84478f0
Add WW_DIGI to the special activities section. Make necessary changes to
...
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
2020-01-24 11:26:36 -06:00
Steven Franke
a63e6e1209
- Force the use of standardized CQ modifier for FT4/FT8 contest operation.
...
- Pass CQ modifier string to the ft4 decoder.
2020-01-08 08:41:47 -06:00
Bill Somerville
75c9e1d696
Fix a patching error
2019-12-29 12:34:02 +00:00
Bill Somerville
5e3781e9e9
Correct some UI text typos
...
Thanks to Christoph, DF7CB, for providing a patch for these typos.
2019-12-29 12:25:59 +00:00
