Joe Taylor
2e5a451b59
Fix a comment in ft8_decode.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8054 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-31 20:16:38 +00:00
Joe Taylor
021336823a
Use a baseline-fitting procedure to improve S/N estimates for FT8.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8036 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-26 16:30:47 +00:00
Steven Franke
d5d8abc29a
1. Improvements to the OSD to allow deeper wideband decoding. 2. Add a third decoding pass. 3. Change symbol metric from max-log to max-amplitude.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8031 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-22 00:14:51 +00:00
Steven Franke
b2df3c9fdb
Remove call to jtmsg.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8016 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-09 15:22:54 +00:00
Steven Franke
0bc966c554
1. Use norder=3 for nagain, 2. Renumber aptypes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7993 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-03 14:46:21 +00:00
Joe Taylor
b5b3ffbfbf
Enable "nagain" for FT8, as in other modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7980 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-02 14:05:37 +00:00
Joe Taylor
e6635624f5
Make 72-bit "contest mode" available in FT8 as well as MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7969 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-28 15:50:13 +00:00
Steven Franke
a7b7c19f88
Comment out diagnostic write to lun 81.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7968 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-28 15:35:17 +00:00
Steven Franke
f6d0bd7787
nQSOProgress now controls AP decoding. Needs testing - may not be stable with AP enabled.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7960 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-27 15:35:40 +00:00
Bill Somerville
33b1742568
Add QSO state machine state and tx audio offset to parameters passed to slow decoders
...
Required to pick best AP masks in FT8 decoder
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7958 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 21:19:21 +00:00
Steven Franke
d06912a075
More informative end-of-line annotation for AP decodes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7935 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-22 17:12:48 +00:00
Steven Franke
bbbcae9233
Add variables lapon and napwid to control ap decoding. Reconfigure the logic for AP decoding and ordered-statistics decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7933 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-22 03:01:09 +00:00
Steven Franke
925cd09085
Only print dupes if SNR is higher than what has already been printed.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7931 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-20 21:08:36 +00:00
Joe Taylor
fc5e10fc08
Comment out diagnostic write.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7930 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-20 19:25:08 +00:00
Joe Taylor
556525702a
Fix wording in list of keyboard shortcuts.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-20 19:23:17 +00:00
Joe Taylor
73df0d00ef
1. Alt+F8 arms "Call 1st" as if a CQ had been sent.
...
2. "Call 1st" label turns red when armed to respond to a caller.
3. Suppress some recognizable false decodes, send them to cumulative file
"data_dir/false_decodes.txt".
4. Reduce sleep delay in decoder() to 10 ms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7928 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-20 15:15:00 +00:00
Steven Franke
46e1cd5a30
Fix a bug in AP decoding when iaptype=2. Decrease time-sync search range to +/- 1.5s. Fix a big with erasure decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7926 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-18 15:22:20 +00:00
Steven Franke
4594aaa589
Work on ap decoding. Diagnostic write enabled.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7925 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-18 01:12:11 +00:00
Steven Franke
238ccff110
Properly round the printed snr.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7917 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-16 17:08:09 +00:00
Steven Franke
748e359fe0
More work on Deep decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7911 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-16 15:56:06 +00:00
Steven Franke
57d898779f
Add some more items to the lun 81 diagnostics.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7891 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-15 01:49:44 +00:00
Steven Franke
a2f2e6091d
More work on AP. Deep decode is unstable - not for use on the air.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7887 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 22:09:50 +00:00
Steven Franke
23b514a2f8
Update call to ft8b.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7885 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 19:46:04 +00:00
Steven Franke
d0ad300a65
Move ft8apset to a separate file.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7882 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 19:22:53 +00:00
Joe Taylor
141f0ceefa
Fix nutc in jt9; alternative sync value for late-start FT8 signals.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7881 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 18:19:48 +00:00
Joe Taylor
a8cba435d4
Code cleanup and test ofFT8 decodes with erasures. Do not use on the air.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7879 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 16:02:01 +00:00
Steven Franke
d8f9f385b4
Use quarter-symbol steps for time sync. Lower sync threshold. Implement subtraction and two pass decoding. Use osd2 only near nfqso.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-12 21:49:39 +00:00
Joe Taylor
a0acb0607d
Re-commit 7806 and 7807, but disable AP decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7814 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-08 14:06:48 +00:00
Joe Taylor
a0ea5dc8eb
Temporarily back out r7806 and r7807.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7808 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 21:40:28 +00:00
Steven Franke
cdfd224974
Add basic ap functionality. Needs testing for decoding speed.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7806 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 20:24:00 +00:00
Joe Taylor
5e0265a5ab
Minor tweaks to FT8 decoder, including norder=3 if ndepth=3.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7805 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 15:27:15 +00:00
Steven Franke
1c2695332a
Send mycall,hiscall,hisgrid into the ft8 decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7797 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 20:00:42 +00:00
Steven Franke
cd5d144b97
Disable subtraction for now.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7794 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 18:58:04 +00:00
Steven Franke
3b87939358
Use dd in sync8, in anticipation of multiple detection/decoding passes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7789 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 15:45:25 +00:00
Steven Franke
ce06547b59
Add subtraction routines - not fully tested or tweaked yet.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7787 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 14:44:17 +00:00
Joe Taylor
76d1169140
FT8 now uses nsps=1920.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7784 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 13:38:06 +00:00
Joe Taylor
ab3832fa82
In ft8_downsample, compute long FFT only when data have changed.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-03 19:52:36 +00:00
Bill Somerville
f73a35842a
Reduce stack usage of F8 decoder modules
...
Reverted to default stack allocation for jt9.exe on Windows.
Tidied up FT8 decoder inteface to remove arguments that will probably
never be used.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7768 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 18:46:14 +00:00
Steven Franke
624ef493a8
Remove s from ft8b argument list.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7763 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 14:58:34 +00:00
Steven Franke
304cbaa672
Use complex signal for fine sync and symbol demod. Lower sync threshold. Improved SNR estimate.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7757 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 13:08:30 +00:00
Joe Taylor
e20bd5eae1
Don't execute AutoSeq steps after sending a 73.
...
For FT8 mode:
1. Open LU 13 in the proper way.
2. Disable diagnostic LU 51.
3. Add keyboard shortcuts CTRL+Plus, CTRL-Minus, to adjust audio Tx frequency
in even 50 Hz steps.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7749 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 13:42:24 +00:00
Joe Taylor
7195f121dd
FT8 mode: Add suggested default freqs; start Tx audio at t=0.5 s rather than 1.0 s; Correct the displayed value of DT.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7747 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-28 18:23:56 +00:00
Joe Taylor
3658e32d57
Use norder=3 at the QSO frequency.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7745 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-28 15:34:38 +00:00
Joe Taylor
43295f018d
Improvements to FT8 decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7744 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-28 14:38:06 +00:00
Joe Taylor
80ad721524
Code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7742 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 20:50:17 +00:00
Joe Taylor
41336209c8
Rearrange some FT8 code for consistency with other modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 19:44:12 +00:00
Joe Taylor
91fbeff072
Many GUI adjustments for FT8.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 15:24:56 +00:00
Joe Taylor
de3e975b98
1. ft8sim now generates 25 signals: f=300, 400, ... 2700 Hz.
...
2. ft8d is now a bare-bones multi-decoder.
3. wsjt-x now includes the bare-bones multi-decoder for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7729 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-19 20:15:43 +00:00
Joe Taylor
09af56b32c
Add a bare framework for ft8_decode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7728 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-18 12:26:41 +00:00