Commit Graph

91 Commits

Author SHA1 Message Date
Bill Somerville
ca067b6942 Set minimum initial sizes for windows
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-10 18:22:12 +00:00
Bill Somerville
94cec5bdc1 IARU region specific working frequencies
Working  frequencies can  be for  all regions  or for  individual IARU
regions. This allows each mode band  tuple to have one or more working
frequencies which  can include local  ones only offered when  the user
configures their IARU region.

Change  working  frequency  default   suggestions  to  better  fit  in
FT8. General  rule is FT8  is at JT65 -2kHz  except where that  is not
possible e.g. where  that would fall into a segment  not allocated for
narrow band data modes. For tight  bands like top band sqeeze existing
JT65 and JT allocations to allow space for FT8.

NOTE: this change changes the WSPR frequency on 80m to allow access to
JA stations that currently have no allocation where it was placed.

ALSO NOTE: the JT65 and JT9 frequencies for 80m move down 6 kHz, again
to  accommodate region  3  users. Other  appliactions  not within  our
control should be asked to move in step when 1.8.0 is released.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7810 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 23:11:41 +00:00
Bill Somerville
ff6b29f3df Synchronize with rig PTT state when using DX Lab Suite Commander
Because Commander  queues up CAT commands  the timing of Tx  audio was
not being correctly synchronized to the rig PTT. This change polls the
rig  PTT state  after changing  PTT  and waits  for  it to  go to  the
expected state.   As it happens, just  doing a query does  most of the
synchronization  as the  query gets  queued behind  the PTT  directive
within  Commander,  with  the  reply being  delayed  until  the  query
completes.  This change goes further  and checks the PTT state changes
within one second.

Note  that users  using  Commander  will should  not  suffer from  ALC
overshoot issues on rigs that suffer such a problem since Tx audio now
only  commences after  the rig  has switched  to transmit.  Users with
hardware sequencers  may need to adjust  their "Settings->Advanced->Tx
Delay" parameter, this change does not introduce any new timing hazard
but there may be a slight lengthening  of the delay to Tx audio if the
rig reports PTT via  CAT as the audio delay may now  be timed from the
actual PTT on the rig rather than the assertion of RTS/DTR.

Still outstanding  is the  slow processing  of Commander  CAT requests
which can cause considerable delays before Tx audio can start.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7764 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 16:04:25 +00:00
Bill Somerville
2687a308d6 Smarter Tx sequencing that allows for CAT processing latency
When using  split operating and/or rig  mode setting there is  a delay
before PTT  is asserted  while the CAT  commands are  processed. There
will even be  a small delay if  CAT is only used for  PTT. This change
waits for these  commands to be completed before starting  the user Tx
delay specified in the settings.

There is  a notable exception to  this in that DX  Lab Suite Commander
does not give us a way of knowing when CAT commands have actually been
completed.   This combined  with  the way  that  Commander spaces  CAT
commands, rather  than being paced  by the rig's CAT  responses, means
that delays of more than 1 second are likely. As most rigs suffer some
sort of ALC overshoot when PTT is asserted with audio already present,
it is strongly recommended not to use  the DX Lab Suite Commander as a
rig control proxy if your rig may  suffer ALC overshoot and you use an
external PA. Please note that using a typical RF power meter to detect
ALC  overshoots is  unwise  as  they are  rarely  fast  enough. It  is
probably wise to assume that all rigs suffer ALC overshoot since it is
very difficult to design an ALC loop that avoids it.

This change  also increases  the range of  the "Settings->Advanced->Tx
Delay" spin box to 0s up to 2s.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7756 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 00:19:58 +00:00
Bill Somerville
0af9d06351 Remove unnecessary window size contraints that Designer insists on adding
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7703 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-04 22:51:34 +00:00
Bill Somerville
c06cc71fba Minor tidy up of Configuration UI layouts
Remove  redundant layout  on Audio  tab  and used  layout managers  on
Colors tab.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7611 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-20 17:17:50 +00:00
Bill Somerville
912e6149d1 Remove unnecessary geometry properties from main & configuration wondows
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7605 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-14 14:23:27 +00:00
Bill Somerville
cecc098924 First attempt at a UI phase compensation tool for MSK144
This builds on the static phase compensation in the MSK144 decoder and
the phase  analysis and  polynomial fitting  capabilities also  in teh
MSK144 decoder,  by allowing  captured data to  be selected  for phase
equalization from the WSJT-X UI.

Reads  captured phase  compensation  curve  estimate files  containing
fitted  polynomial coefficients  and measured  phase data  from MSK144
receptions. Intent  is to select a  compensation curve that is  from a
known transmitter like  an SDR which have good  phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A  suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.

Plots of  the currently  selected polynomial  and its  modified higher
order terms  polynomial which is  actually used in  equalization (this
plot may  be dropped - it  is just for  kicks at the moment).   When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.

Basic  maintenance  is also  included  allowing  clearing and  loading
captured  plots and  an option  to revert  to a  flat no  equalization
curve.

More to come on this as  amplitude equalization is also possible, this
will probably  be similar, maybe even  plotted on the same  graph with
dual  axes  for phase  and  amplitude.   Amplitude correction  from  a
measured  reference   spectrum  could  be  viewed   and  selected  for
equalization for all modes. TBC...

This   change    also   introduces    the   QCustomPlot    3rd   party
widget. Currently this  is statically linked from a  qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring  has been  completed,  which  is more  in  line with  the
QCustomPlot author's  intentions. This  will allow efficient  reuse in
other tools shipped with WSJT-X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 02:13:13 +00:00
Steven Franke
353c2bb4c3 Tweaks.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7422 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:36:03 +00:00
Steven Franke
02a4cb95a4 Add an option on advanced time to enable MSK144 Rx filter equalizer. Other changes necessary to accommodate coexistence of static (Rx Filter) and dynamic (QSO partner-dependent) phase corrections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7421 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:21:23 +00:00
Joe Taylor
2b5dc480f9 Update the Tool Tip for Contest Mode checkbox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7398 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 20:12:19 +00:00
Joe Taylor
3b1e9c1e6c Extend the Rx period in QRA64 mode to 53.5 s; an improved label on Settings -> General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7385 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 16:25:07 +00:00
Joe Taylor
7299a023ed Set max TxDelay to 0.5 s.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7348 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-29 19:24:17 +00:00
Joe Taylor
8cf4fd2f8e No longer any need for the checkbox labeled "Rx frequency offset with CQ nnn" on the Settings -> General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7343 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 16:20:57 +00:00
Bill Somerville
aef64f59d5 Remove the 13 character limit on macro entry in settings
This  was never  strictly  enforced as  macros can  be  edited to  any
length. Obviously only  standard messages and free  text messages less
than or equal to 13 characters can actually be sent in the slow modes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7304 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-12 12:04:57 +00:00
Bill Somerville
9fda726c60 Fix up broken settings UI layouts and tab order
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7253 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 14:34:30 +00:00
Joe Taylor
cddd34c351 Correct the undesired relocation of "OK/Cancel" buttons on Settings screen.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7234 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 13:17:57 +00:00
Joe Taylor
c067a21e9a Minor tweaks of the Pwr memory feature.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7230 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 20:35:34 +00:00
Joe Taylor
0441986ccc Add the W9MDB patch (very slightly modified) for band-by-band memory
of power settings for Transmit and Tune.  Also an interim update of
v1.7_Features.txt.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7229 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 20:24:09 +00:00
Joe Taylor
995fcf5359 1. Gray-out "Include averaging" and "Include Deep Search" if not in JT4 or JT65 mode.
2. Make the "MSK144 Realtime decode" checkbox invisible, in preparation for removing it entirely.
3. Always use RealTime decoding in MSK144 mode.  (For now, at least, click-to-decode works as before.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 18:21:45 +00:00
Joe Taylor
7d8a896e6a Spinbox step size = 1 dB for S/N degradation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7159 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 15:44:27 +00:00
Steven Franke
f210e47cd5 MSK144:
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines. 
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Joe Taylor
e1ef9b0ee0 Temporarily disable the cbRealTime checkbox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7099 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:37:39 +00:00
Joe Taylor
109caa8912 Add real-time decode routine.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7098 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:35:00 +00:00
Joe Taylor
3b97ae7417 Implement real-time decoding in MSK144 mode, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
Bill Somerville
9fb5422fbb Tidy up the settings advanced tab layout and remove unnecessary elements
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7074 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:40 +00:00
Joe Taylor
d3fd8fc523 Oops! Should always default to General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7072 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:46:10 +00:00
Joe Taylor
15b20efdd7 Correfct typo; add tool tip.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7071 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:41:52 +00:00
Joe Taylor
73612cf6a5 Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:37:00 +00:00
Joe Taylor
d3182f4161 Remove the "Robust sync" option.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 17:26:05 +00:00
Joe Taylor
ec281f93c4 Add a user control for Tx Delay, on the Advanced tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 23:18:48 +00:00
Joe Taylor
dc7826d5ea Startup messge box for Alpha Release. New sigma limit in detectmsk40. Minor tweaks to GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 15:20:16 +00:00
Joe Taylor
289ba66119 1. Fix cause of "frozen UTC" bug in MSK144 mode. (Could there be more than one cause?)
2. Fix failure to remember Ftol setting in MSK144 mode.
3. Remove obsolete controls from Advanced tab.
4. Add control for "x 2 Tone spacing" on Advanced tab.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-01 19:46:19 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 11:36:59 +00:00
Bill Somerville
f962faaeea Tidy up settings tab widget names
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6760 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-11 18:50:27 +00:00
Bill Somerville
bdd3d866c6 Fix outdated "Test CAT" button tool tip
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6659 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-28 23:43:40 +00:00
Bill Somerville
946ee56db2 Remove erroneously committed tool tip text
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6636 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-23 23:40:05 +00:00
Bill Somerville
2cfbb15b4f Rig control overhaul to implement generic Doppler shift tracking
The  concept of  a nominal  receive  and transmit  frequency has  been
introduced. This is  used as a base frequency  for Doppler correction,
frequency setting  and reporting. The  start up frequency is  now zero
which is  updated by the first  rig control status report.  This needs
more  work to  accommodate  calling frequency  plus working  frequency
operation as is used for random MS operation etc..

The  main  window  frequency  display  now  shows  the  transmit  dial
frequency while transmitting.

The mode changing logic sequence has been changed such that the rig is
correctly put  into and  taken out  of split mode  as required  by the
target mode.  This also  avoids the "other"  VFO having  its frequency
changed when  entering a mode that  does not use split  operating like
WSPR.

The main window  band combo box edit  may now be used to  input an kHz
offset  from the  current MHz  dial  frequency. This  is intended  for
setting  a sked  or working  frequency on  the VHF  and up  bands. For
example the working frequency for 23cms  might be set to 1296MHz and a
working  frequency of  1296.3MHz would  be selected  by selecting  the
23cms band  with the combo box  drop down list and  then entering 300k
into the band combo box edit widget.

When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such  that the frequency  clicked on  becomes the Tx  and Rx
frequency using  the fixed 1000Hz  DF that  JT4 modes use.   This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF  for both Tx and Rx and therefore
one  can "net"  to an  off frequency,  but visible  on the  waterfall,
caller with one click.

Improvements to OmniRig  rig control including use of  the serial port
control lines RTS or DTR, on the  CAT serial port used by OmniRig, for
PTT control.

Incrementing transaction sequence numbers added to messages to and from
the rig control  thread. This enables round trip status  to be tracked
and associated with a request. For  example a command that might cause
several  asynchronous  status  updates  can  now  be  tracked  in  the
originating thread such  that it is clear which updates  are caused by
executing the  request. This in turn  allows updates to be  held until
the request is complete i.e. the  state is consistent with the results
of the request.

Messages  to the  rig control  thread are  now posted  as a  new state
(Transceiver::TransceiverState) object. The  rig control thread tracks
requests and  actions any differences  between the prior  requests and
the new state.

The rig  control thread is now  stored on the  heap so that it  can be
closed down  and released as needed.  Along with this the  rig control
close  down  semantics  are  better defined  avoiding  some  potential
deadlock situations.

If the rig  is placed into split  mode it will be  reverted to simplex
mode when the rig connection is closed.

When  using direct  rig control  via Hamlib,  rigs that  have A/B  VFO
arrangements and  no method to query  the current VFO like  many Icoms
and  the Yaesu  FT-817/857/897(D)  series now  have smarted  frequency
updating requiring no  VFO changes when changing  the frequency.  This
is particularly  important when doing  Tx Doppler correction  to avoid
glitches.

The implementation  of emulated  split operating  mode ("Fake  It") is
simplified and improved.

A dummy  Hamlib transceiver for PTT  control on a separate  port is no
long instantiated if CAT or VOX PTT control is selected.

The resolution and  any rounding of the rig CAT  frequency set and get
commands is determined automatically  upon opening the rig connection.
This is needed to determine the  rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.

Frequency  calibration is  calculated separately  for the  receive and
transmit frequencies.

Whether  the  rig  modulation  mode  should be  controlled  is  now  a
constructor  argument rather  than  being passed  with individual  rig
control requests.

Doppler  shift  correction  is   considerably  enhanced  with  simpler
controls and much  better rig control.  A new mode  of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via  CAT  when transmitting.   Such  rigs  have a  Doppler  correction
calculated  for the  middle of  the next  transmit period  just before
transmission starts. While  using Doppler tracking it  is now possible
to adjust the  sked frequency either using the new  kHz offset feature
of the main  window band combo box  or by directly tuning  the rig VFO
knob while holding down the CTRL key.

The astronomical data window that includes Doppler tracking control is
now opened  and closed using a  checkable menu item to  avoid it being
accidentally closed.

Debug  configuration  rig  control  diagnostic  messages  now  have  a
facility argument for clearer and more standardized trace messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
Bill Somerville
d63230729b Fix some logic errors in CAT serial port control line settings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:41 +00:00
Joe Taylor
c35c80a4ac Make "group_box6" invisible, for now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6553 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-23 15:48:44 +00:00
Joe Taylor
dfb8dc7422 Add a "Single decode" checkbox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6516 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 15:13:06 +00:00
Joe Taylor
a0318d3a0a Calibration of the "Degrade S/N of .wav file" requires knowledge of receiver bandwidth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-23 19:37:38 +00:00
Bill Somerville
cf5f3916c7 Add facility to reset split mode when closing a rig connection
This option defaults to on but may be unchecked in settings.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-06 17:24:17 +00:00
Joe Taylor
4680817a93 Separate variables for the decoding parameters that had been packed into ndepth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-24 15:05:45 +00:00
Bill Somerville
e25eecc828 Remove redundant layout manager
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-24 00:11:32 +00:00
Joe Taylor
621b1dde9f Default to General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6166 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 18:09:23 +00:00
Joe Taylor
475118428e Add facility to degrade S/N of data from .wav files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 18:05:36 +00:00
Bill Somerville
ad11444c63 Tidy up and make platform agnostic the Configuration->Advanced Tab
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6155 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 19:17:06 +00:00
Steven Franke
752c35f356 tweak layout in advanced settings tab
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6153 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 17:48:53 +00:00
Steven Franke
c9ad0c3038 Add robust sync checkbox to Advanced setup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6151 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 15:27:14 +00:00