Commit Graph

834 Commits

Author SHA1 Message Date
Bill Somerville
4cfefe8893 Allow for -0.0 DT value when matching UDP reply to CQ requests
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6236 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-06 23:14:32 +00:00
Bill Somerville
ffc43bd353 Abort WSPR band hopping when a rig control failure occurs
This avoids spots being sent with incorrect frequencies.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6214 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-01 23:24:57 +00:00
Joe Taylor
b8f772d0b9 More massaging of draft paper on the FT dedoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6205 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-01 00:28:58 +00:00
Joe Taylor
b557035d0c Send parameters for experience-based decoding to jt9[.exe].
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6181 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-25 20:09:57 +00:00
Joe Taylor
4680817a93 Separate variables for the decoding parameters that had been packed into ndepth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-24 15:05:45 +00:00
Joe Taylor
475118428e Add facility to degrade S/N of data from .wav files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 18:05:36 +00:00
Steven Franke
c9ad0c3038 Add robust sync checkbox to Advanced setup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6151 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 15:27:14 +00:00
Bill Somerville
a3903325a1 Make sure that split doesn't get enabled on WSPR modes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 14:39:36 +00:00
Joe Taylor
b0f70512f7 Correct the display of Echo-mode label.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-20 20:26:20 +00:00
Bill Somerville
1a23757b26 Reintegrate merge from wsjtx_exp branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-18 01:28:12 +00:00
Joe Taylor
ab8098263a Use HK0/ rather than HK0A/ in table of prefixes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6104 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-16 15:55:52 +00:00
Bill Somerville
58fab3474d Add WSPR decodes to UDP message protocol
The message_aggregator (MessageAggregator.cpp) has  been updated to do
something with WSPR decodes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6101 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-15 23:03:11 +00:00
Bill Somerville
6bf8361850 Add decoding is busy flag to UDP Status message
Updated  message_aggregator reference  application  to  show the  mode
label in the status bar with a cyan background colour when decoding is
busy.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-13 15:44:11 +00:00
Bill Somerville
3c8d6d26df Use a type 1 compound call message for Tx1 where possible
VHF & up conventions prefer that QSO partners send the other station's
full call sign to confirm its reception before sending any R-dB or RRR
report.  This  is not  always possible  but in the  case of  one party
having a  type 1  compound call  sign it should  be done  in the  Tx 1
message. In  the last resort (working  a type 2 compound  call sign or
where both parties  have a compound call sign) the  QSO partner's full
call sign is sent in a free text 73 message like "<full-call> 73".

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6081 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-12 01:16:44 +00:00
Bill Somerville
59b494a13f Only change mode on double-click of a decode in dual mode
Automatic mode  change between  JT9 and JT65  should only  happen when
dual JT9+JT65 mode is selected.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6071 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-10 23:26:42 +00:00
Joe Taylor
caa51f4999 Display default_frequency (14.076 MHz) at startup, rather than
18446744073709551615 Hz.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6069 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-10 18:39:37 +00:00
Joe Taylor
4a38e03020 Add mw/W/kW values to the WSPR control for setting Tx power.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-10 18:11:06 +00:00
Joe Taylor
a7e2168532 Remove code associated with the unimplemented JT9W mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6061 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-09 17:19:48 +00:00
Joe Taylor
54c9ebec74 Update Tx frequency to the WSPR value after change to WSPR mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5772 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-08-10 14:18:57 +00:00
Bill Somerville
1937612685 Remove Tab 1/2 differences from UDP interface
The UDP "Free  text" message comamnd should  not expose implementation
differences between tab one and tab two. The "send next" capability is
not available on  tab two so use  of it has been removed  from the UDP
interface.

The ability  to trigger  the immediate  (or in next  Tx period  if the
current period  is Rx) sending  of the  current free text  message has
been added to the UDP interface. This is done by sending a "Free text"
UDP message containing an empty text message with the "Send" flag set.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5725 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-27 11:34:11 +00:00
Bill Somerville
76eed0ecc4 Start dealing with thread related object lifetime issues
There are  several object  lifetime issues that  can cause  crashes on
application close down.  This change  is the first phase of addressing
these issues.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5719 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-13 11:00:55 +00:00
Bill Somerville
5e3ec0e891 Move pseudo RNG seeding to start of application
Also switched  to qrand() in place  of rand() where possible  as it is
thread safe.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5716 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-12 10:28:28 +00:00
Bill Somerville
0a7bf935bc Fix regression in CAT sequencing from r5700
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5714 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-11 22:50:05 +00:00
Bill Somerville
ca5a1ed348 Make WSPR band hopping tuneup Tx dependent on Enable Tx button state
Tuneup is  now only  possible with  Tx Enable  checked, if  no message
transmission is required with  tuneup transmissions then Tx percentage
zero must be selected along with Enable Tx.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5713 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-11 22:49:56 +00:00
Bill Somerville
1c8d8f749c Ensure that the WSPR Tx percentage is correctly initialized
Also tidied some code up.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5700 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-07 19:02:25 +00:00
Bill Somerville
e0d4a2b2fb Update decodes widgets when entering and leaving WSPR modes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:20 +00:00
Bill Somerville
2c3a258800 Manage .c2 files in the same way as .wav files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:13 +00:00
Bill Somerville
45623b60b9 Only delete last .wav file on exit if it is not to be saved
Also enhanced  delete .wav  files menu  entry to  delete .c2  files as
well.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:05 +00:00
Joe Taylor
5250e0765a Only one text window in WSPR and Echo modes, even if "Show DXCC" is enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5651 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-01 17:38:18 +00:00
Bill Somerville
3dd824ad6b Make the main window more portable and font change capable
The Rx meter  is now a better  Qt citizen and can be  resized. Added a
more obvious peak signal indicator. It  is now a custom widget derived
from QFrame and is now directly added via promotion in Designer.

Added a custom  widget to act as  a letter spin box, this  is used for
sub mode control.  Switched the frequency tolerance widget  to a combo
box with preset  values so that it is more  uniform across systems and
font sizes.

Added container widgets  for group control of various  UI widgets such
as  QSO controls,  DX call  controls and  WSPR controls.  Introduced a
stacked widget to allow the WSPR controls to be swapped in in place of
the "QSO" controls. The "QSO" controls  are are the Rx, Tx and related
controls along with  the main tab widget with the  message buttons and
fields. This means  that the WSPR version of the  main window (and EME
Echo mode) are now much cleaner.

Increased the  size of the  rig control  widget and styled  its colour
using a dynamic property so that it  can be defined in the Designer UI
definition. Reinstated it  as a push button to do  a rig control reset
and retry after an error.

Reset most UI widgets to default properties, particularly removing any
fixed sizes so that they can resize freely when fonts are changed. The
overall layout is now controlled almost exclusively by stretch factors
on some of the rows and columns of the various grid layout managers.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-25 22:41:13 +00:00
Steven Franke
7210d1d41d Added logic so that saving of c2 files will turn on/off with None/Save All. This did not fix Save Decoded, which has no effect in WSPR mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5626 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-21 23:08:47 +00:00
Bill Somerville
46032112ca Clear generated messages when clearing DX after logging
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-18 22:18:05 +00:00
Bill Somerville
4840e9e21d Ensure that he .WAV file read flag gets cleared when returning to monitoring
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5618 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-15 22:49:31 +00:00
Bill Somerville
8dbcf403aa Improved WSPR band hopping band selection
When  band hopping,  coordinated  slots that  are  unavailable may  be
substituted  by  non-coordinated  bands or  non-scheduled  coordinated
bands.

Rather than  randomly choosing a substitute  band, random permutations
of available receive-only and transmit allowed bands are generated and
consumed  one at  a time  when a  substitute band  is required.   This
ensures that  all available  bands get  an airing  on a  regular basis
while selections remain randomized as much as possible within the user
defined constraints of  coordinated bands, transmit ratio  and Rx only
bands.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5616 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-15 12:04:09 +00:00
Joe Taylor
df873479d0 Add UTC to WSPR Tx dividing line; add WSPR Rx dividing line when no decodes;
increase ranges of Gaiz/Zero sliders on Echo Graph.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5605 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-13 14:24:54 +00:00
Joe Taylor
7dda2c22ef Fix erroneous use of a potentially NULL pointer.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5604 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-13 12:08:32 +00:00
Joe Taylor
55cdeea079 Oops! Bad Rx frequencies were being recorded in WSPR_history.txt. Fixed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5603 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 21:46:54 +00:00
Bill Somerville
3df86ef17e Initialize m_tuneup to ensure halt Tx button behaves
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5601 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 19:03:37 +00:00
Joe Taylor
0044f9a8c7 Remove a diagnostic write.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5600 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 17:30:08 +00:00
Joe Taylor
f3a0cee87c WSPR mode appends Date Time Freq T/R N to file WSPR_history.txt.
For possible statistical analysis.  N is the number of decoded signals.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5599 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 17:29:12 +00:00
Joe Taylor
38b79810d8 Remove a diagnostic write.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5598 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 14:10:54 +00:00
Joe Taylor
fee9f658c7 Echo mode is *not* a Simplex mode.
Code that sets Echo mode calls "WSPR_config(true)" to make a bunch
of irrelevant GUI controls invisible, thus simplifying the user
interface.  However, Echo mode should NOT be set as a simplex mode.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5597 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 14:09:40 +00:00
Bill Somerville
588c037ae9 Do not make unneeded rig adjustments when Doppler tracking disabled
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5595 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 00:26:44 +00:00
Bill Somerville
98f84a5902 Move >=50MHz check for Doppler tracking back to the main window
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5594 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 00:26:36 +00:00
Bill Somerville
724d5703c4 Add a flag for a mode to enforce simplex i.e. WSPR
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5593 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 22:42:41 +00:00
Joe Taylor
e38c71af1e Clear Message Averaging window when ClrAvg is clicked. Remove some
obsolete code.  Tweak a label.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 17:18:07 +00:00
Bill Somerville
640c0c00fe Finally getting the hang of UIs that work on Mac and elsewhere
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5587 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 17:01:12 +00:00
Joe Taylor
25d4388081 Fix logical flaw in Echo mode sequencing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5585 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 15:48:00 +00:00
Joe Taylor
289b4c70f8 Correct the bounds error test in avecho. Ensure proper GUI controls
visible in Echo mode. Reset nsum=0 when Tx Enable is toggled ON in Echo mode.
Don't restart Monitor after finishing a sequence of Echo transmissions.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5584 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 15:32:55 +00:00
Joe Taylor
5968277cd7 Correct a logic flaw that occurred after *Tune* was used.
Remove some disused diagnostics.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5581 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 13:52:55 +00:00