Commit Graph

300 Commits

Author SHA1 Message Date
Joe Taylor
4d9c9e08e2 If 47-buffer call takes too long, start the 50-buffer call late. 2020-03-11 16:03:51 -04:00
Joe Taylor
d69cb49e9a Diagnostic writes to fort.71 in jt9a.f90. 2020-03-11 14:02:19 -04:00
Joe Taylor
199ff3dd3d Experimental work-around for FT8 decoding on slow computers. Important changes:
- don't start function decode() is decoder is already busy
  - send updated m_ihsym to jt9[.exe] via ss(1,1).  Bill won't like this!
  - jt9 bails out of the 41-buffer pass at m_ihsym=45.
2020-03-10 16:26:42 -04:00
Joe Taylor
592f4eea71 Remove a qDebug() call. 2020-03-09 15:29:57 -04:00
Steven Franke
f2266c3c54 1. subtractft8: on the last call to sqf, don't need to do the long FFT.
2. mainwindow.cpp: based on the time when <DecodeFinished> is received, calculate
mswait to try to place the killFile time at 0.75*m_TRperiod.
2020-03-06 11:06:44 -06:00
Joe Taylor
431ec50212 Progress toward decoding at 41/47/50 buffers. Not yet complete! 2020-03-05 15:37:31 -05:00
Steven Franke
6773768586 Clean up the timestamp adjustment logic, and make the threshold 0.5*TRperiod. 2020-03-05 11:25:49 -06:00
Steven Franke
07c753e284 Make ALL.TXT Rx timestamp equal to the beginning of the TR period, even if the decode comes in after the start of the next TR period. Make Tx timestamp the actual time that Tx started. 2020-03-05 11:16:56 -06:00
Joe Taylor
8e7a56634b Set nearly=41; don't write <DecodeFinished> after the early decode pass. 2020-02-28 15:03:39 -05:00
Joe Taylor
b9888a09ff Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-02-26 13:16:12 -05:00
Joe Taylor
6afff5821e Correct the times written to ALL.TXT when decode occurs after the T/R boundary. 2020-02-26 13:15:22 -05:00
Steven Franke
0ca6cbb575 wsprd: improve decoding and reduce the number of false decodes
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
2020-02-25 10:48:38 -06:00
Joe Taylor
4a4864d2ae FT8 early decoding is now working. 2020-02-13 15:05:37 -05:00
Steven Franke
70b84478f0 Add WW_DIGI to the special activities section. Make necessary changes to
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
2020-01-24 11:26:36 -06:00
Steven Franke
a63e6e1209 - Force the use of standardized CQ modifier for FT4/FT8 contest operation.
- Pass CQ modifier string to the ft4 decoder.
2020-01-08 08:41:47 -06:00
Bill Somerville
75c9e1d696
Fix a patching error 2019-12-29 12:34:02 +00:00
Bill Somerville
5e3781e9e9
Correct some UI text typos
Thanks to Christoph, DF7CB, for providing a patch for these typos.
2019-12-29 12:25:59 +00:00
Bill Somerville
5a23edbbae
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2019-12-08 18:42:06 +00:00
Bill Somerville
485f787cef
Increase maximum SNR filter value in Fox mode to 70dB
This change abandons the previous settings file key for this control
so that all users pick up the new default of 70dB.
2019-12-08 18:39:37 +00:00
Bill Somerville
32c36f566d
Use DB date time field item delegate to imbue editing in log windows 2019-12-08 18:37:35 +00:00
Joe Taylor
7540d2137a For accessibility: Alt+R sets Tx4 message to RR73, Ctrl+R to RRR. 2019-12-05 11:27:17 -05:00
Bill Somerville
fb1b2e7687 Tagging the WSJT-X v2.1.1 release
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a8/QACgkQ2GSwbR6B
 YY8y+ggAqwaaCRMCSwDzStooYjStJErVoZ/yB//MmoF+798TBb+3MkiT+KclW7aN
 rxTOmEJ+a84PmsiW6Qz/AAcHPnbKDhtwWASZooopgNYDfgyaUib3HfIa+cFJO6my
 OUzlTsH94yDxeBCWOtf1dLiP0YwJKfp/vxzbfDAWXTd4dx3Ok/7KwghYocmP3eCq
 ruZ+dWojQzwE+h50P6B9gTFxGWMHUDDNeZ/c8u494wqDQvQaRoM9oOnQWzlGiMis
 JaerraI52JEdFLnXjtLYeyXtfg+zA0KvRY2DWy1aCPpGkNjy3DPNlOA+cDQpzBru
 NIqsUF+GplgkVs3sKNLXq36ZgaBQBg==
 =5w4B
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a9R8ACgkQ2GSwbR6B
 YY9SWQf+JdfIvlHy8ExSs9ImCLck/e66V2OAqaEONQX1bEC4QiG3M/rVJGgf2iFz
 ZFshtilsajlpsYZQIFToTmJmI76eGLAmyNIcZN2WpcJQMNWZnxqklMj2wIHbRh+g
 Pvw3FC+lc4LUjZCCMYrVjNXxsRmQtjqV1lVFBnmrAWCdrgHmhyrVbPZT4B+fRTXL
 ikw/BiRgxhI0aoIWKzNrtztMYUBjanKLTHE81AVgsgZkBDNybOjR7mE2E/Jwc4Qx
 mVu+Z0uI+bVuBlMOrqp0K+rrUz7qMZe5/AMSRbgzwfueEOIShgu2wrfV++3JDXLH
 AhtIAcL/b39RBx0jkFE8rBKaZpkoAw==
 =DNp6
 -----END PGP SIGNATURE-----

Merge tag 'wsjtx-2.1.1' into develop

Tagging the WSJT-X v2.1.1 release
2019-11-24 21:24:39 +00:00
Joe Taylor
849e8c7c55 When using EU VHF Contest messages, update the received exchange m_xRcvd only if decoded messages is addressed to me. 2019-11-18 14:00:42 -05:00
Bill Somerville
58c901240b
Use call, mode, and frequency from Log QSO for worked before records
The current frequency,  mode and, call were incorrectly  being used to
create a new  worked before record from a logged  QSO. This meant that
band changes  etc. made  before clicking  "Ok" to log  a QSO  would be
erroneously attributed to the worked before records.
2019-09-17 21:04:34 +01:00
Bill Somerville
a3efe8117c
Qualify regeneration of GFSK message regeneration to only when Txing 2019-09-07 21:23:39 +01:00
Bill Somerville
137bc1ccab
Tx waveform regeneration for GFSK modes Tx audio offset change 2019-08-15 15:20:45 +01:00
Bill Somerville
cefadfeaa3
Disable auto Tx before logging dialog shown even if disable Tx on 73 is not set 2019-08-13 00:20:40 +01:00
Joe Taylor
79b805b0e7 The start of some code for computing QSO points in WWROF/SCC digi-contest. 2019-08-08 09:55:08 -04:00
Joe Taylor
f265fa83f5 Disable the "not GA" warning message. 2019-07-18 15:30:33 -04:00
Bill Somerville
28f5cb0fb9 WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qXxcACgkQ2GSwbR6B
 YY/ZGAf8Da+a+83dpnj5dnosIKWwSwgpiWHY0JKzm8fp0n3hcs5+rV1/gM81xXKT
 J3lbHWykGzMYlZNoEw3eNwQbXzOCf/7mOaeTKJQnBLukMpTLmsz5b5nYaCjvvRGM
 6HKSddNS3Q4iz4qdakOgWnqdZeYJkRR3Z3XsTmlrG02GsSVlbXzOEyceooqM6EGd
 w5WTkvpls+43OzwcGJ50SHzPlBAJYycE9vrAxxFOxU2fhqRRD/ttMZmUmjRY7Iqa
 jRRQ39K1Io7i9QG/3V6FBZDttqeFfvvlkVzH0/TeMeCUOQiKbzuGxM01PJ6be7D1
 H114v5l06GH56T7qpaF0IB2ZStkbrA==
 =voDy
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qX30ACgkQ2GSwbR6B
 YY8p0QgAgt8Y/yLCyFw0+wfO2h8yIFyh2j1c8EfBf0+I/2xaIYMUfPPlmC3jkWhw
 mtoCJVKkpCNcxr9mo6wjQp7x90pRUH3k78O0VtzbKWz7lveoN7Vguo+iVHDbEhUA
 a9E6yMwvskH5Mr6+cFiS4EVYyjAsuG/BL+4FFMDUVQOaKXNBbgJuc2mjpHkcnEbK
 C+XUxipcAUElH1Ks90eHT/vLoowAOP9jo0xSR1RqJMJlaKHxWZivsBCfQdI1xxn0
 arlQO3bjIsxyNq/Ru7XWV5C56JmWjoPWCcqt5GRrNJLwGw/haSuDIMURaE/vrMif
 csar293vcm5PzuTADArTQkhqK951pQ==
 =1mJJ
 -----END PGP SIGNATURE-----

Merge tag 'wsjtx-2.1.0' into develop

WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0
2019-07-13 23:47:18 +01:00
Joe Taylor
ced74644fd On startup or switching to QRA64 mode, set Tx and Rx audio freqs to 1000 Hz. 2019-07-09 14:59:34 -04:00
Bill Somerville
01aaa852e3
Updates to support Qt v5.13
Replacement of deprecated Qt functions and member functions.
2019-07-08 01:37:04 +01:00
Bill Somerville
ab9675c2a7
Squash several compiler warnings 2019-07-03 01:51:40 +01:00
Bill Somerville
40cf45c259
Squash a compiler warning 2019-07-03 01:25:25 +01:00
Bill Somerville
cee3c9796f
Squash a compiler warning that was also a potential defect 2019-07-03 00:16:39 +01:00
Bill Somerville
a27668428b
Cleaner warning sidestep 2019-07-02 21:07:43 +01:00
Bill Somerville
e7ace39e44
Fix a warning 2019-07-02 19:33:09 +01:00
Chris Karpinsky
a30d97fb57 Merged develop into feat-refactor 2019-07-02 13:11:40 -05:00
sirhc808
dd53e8d348 incorporate code review feedback 2019-07-02 13:00:32 -05:00
sirhc808
1f57ba5fec improve physical structure 2019-07-02 12:45:05 -05:00
sirhc808
27d4471cde Merge branch 'ft9_refactor' into feat-refactor
# Conflicts:
#	CMakeLists.txt
#	lib/ft4/getcandidates4.f90
#	lib/ft4/sync4d.f90
2019-07-02 12:06:14 -05:00
sirhc808
ee5d5c8ae9 improve physical structure 2019-07-02 10:19:43 -05:00
sirhc808
84fd0ed7c7 clean up a few warnings 2019-07-01 21:10:43 -05:00
Bill Somerville
1968597783
Merge branch 'release-2.1.0' into develop 2019-07-02 00:18:22 +01:00
Bill Somerville
adcf202637
Repair a crash when decoding ISCAT
Passing a  auto stack variable to  a future is  not a good idea  as it
will almost certainly  go out of scope before the  future has finished
executing.
2019-06-30 12:17:17 +01:00
Bill Somerville
c65d832356
New UDP messages to close and reconfigure WSJT-X plus more status fields
The Status(1) message acquires the new fields Frequency Tolerance, T/R
Period,  and  Configuration Name.  The  Rx  DF,  Tx DF  fields  become
unsigned (this should be a benign change which is just for correctness
as -ve values have never been possible).

The   Close(6)  message   becomes  bi-directional   allowing  external
applications to gracefully close down WSJT-X instances.

A  new  message SwitchConfiguration(14)  is  provided  that allows  an
external application to  switch the current configuration  of a WSJT-X
instance.

Another  new  message  Configure(15)  is provided  to  allow  external
applications to adjust some key parameters like the mode and submode.

See the  NetworkMessages.hpp header  commentary for full  details. The
UDPExamples/MessageAggregator reference  application has  been updated
to be able to exercise all of the above changes.

Note   that   this   commit   enforces  stricter   checking   on   the
"Settings->Reporting->Allow  UDP  requests"   option,  which  must  be
checked  before  any state  changing  incoming  messages to  a  WSJT-X
instance are processed.
2019-06-25 14:35:58 +01:00
Bill Somerville
91aa591a71
Better ADIF conformance for ARRL Field Day mode
This change may break N1MM Logger+ integration, notably the CLASS ADIF
field is  populated which may not  be recognized by N1MM  Logger+, nor
interfaces to it.

One exception to  ADIF conformance is that the ARRL_SECT  field may be
populated with  the value DX  despite it  not being a  valid ARRL_SECT
enumeration value. This is done for consistency with N1MM Logger+ ADIF
exports.
2019-06-24 00:56:41 +01:00
Bill Somerville
3f5a996842
New UDP message SwitchConfiguration(14) to switch to an existing configuration
The Status(1) message also acquires  the current configuration name as
a new  field. See  NetworkMessage.hpp for  details. The  UDP reference
example program message_aggregator acquires the ability to display and
change  the configuration  of a  WSJT-X client  to exercise  these new
features.
2019-06-13 01:44:28 +01:00
Bill Somerville
ef21239a9b
Merge branch 'f2008' into release-2.1.0 2019-06-07 17:24:30 +01:00
Bill Somerville
067692cd1e
Disable automatically enabled toolbar on Mac
Qt automatically adds a "Menu->View->Show Tab Bar" button, this
change disables that as we don't have a tool bar or tab bar.
2019-06-07 17:21:57 +01:00