w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-17 09:31:59 -05:00
Code Issues Packages Projects Releases Wiki Activity
5,340 Commits 5 Branches 98 Tags 208 MiB
53c6b50d90
Commit Graph

231 Commits

Author SHA1 Message Date
Joe Taylor
c8dae29425 Synchronized FT4 auto-sequencing now works. 2019-04-02 13:27:55 -04:00
Joe Taylor
181e5c7b9d Remove unused code left over from asynchronous FT4 mode. 2019-04-02 13:16:06 -04:00
Joe Taylor
d579e5973e Correct the size of saved FT4 .wav files. 2019-04-02 13:04:40 -04:00
Joe Taylor
fd239d9c07 Clean up some timing issues with time-synchronized FT4. 2019-04-02 11:39:28 -04:00
Joe Taylor
888b5fee28 Make "Tx 1st/Even" visible in FT4 mode. 2019-04-01 14:40:16 -04:00
Joe Taylor
e0d4c94cc1 Some very basic functionality for time-synchronized FT4. 2019-04-01 14:23:10 -04:00
Steve Franke
68308e23aa FT8: Tx waveform will now change (after a short delay) if Tx message is changed after a transmission has started. 2019-03-29 15:30:50 -05:00
Bill Somerville
9e75b5c2b5 Log buttons 2019-03-29 02:54:30 +00:00
Joe Taylor
e3d4a1c3a6 FT4: double-click on a yellow Tx mesage causes re-sending that message. 2019-03-28 13:08:43 -04:00
Joe Taylor
e4ebddcf13 When Tx1 entry is disabled, Tx1 button should also be disabled. 2019-03-28 10:41:56 -04:00
Joe Taylor
1da4809e1b Do not disable double-clicking when m_inQSOwith is populated. (Correct???) 2019-03-28 09:41:38 -04:00
Joe Taylor
e571349c69 In FT4 mode, let the Tx# buttons start a transmission. 2019-03-28 09:30:26 -04:00
Joe Taylor
665dbd0f78 With Alternate F1-F5 checked, let Ctrl+F1 send the message in Tx1. 2019-03-22 13:52:06 -04:00
Joe Taylor
e38091705b In FT4 mode, let F11 and F12 move Tx freq by +/- 120 Hz. 2019-03-22 10:57:09 -04:00
Joe Taylor
974cf50e16 Red label (ui->labDXped) should disappear in FT4 modeif we leave all contest modes. 2019-03-22 09:24:52 -04:00
Joe Taylor
2f0ff14134 Enable NA_VHF contest messages in FT4 mode. 2019-03-22 08:49:22 -04:00
Joe Taylor
e2db793b5d Don't save .wav files in FT4 mode unless SaveAll is checked. 2019-03-22 08:20:19 -04:00
Joe Taylor
212e4a3c07 Add a timeout message for what will become v2.1.0-rc1. 2019-03-21 12:36:38 -04:00
Joe Taylor
ffb6d3624f In FT4 mode, display only "for us" and Tx messages in right window. 2019-03-21 09:33:37 -04:00
Joe Taylor
3a6e26d645 Clean up the FT4 logic for setting status of labDXped, cbAutoSeq, cbFirst. 2019-03-14 12:03:07 -04:00
Joe Taylor
6a2effcfc6 In FT4 mode, Tx4 is now hardwired to the 'RR73' message. 2019-03-13 13:59:41 -04:00
Joe Taylor
e150d003d6 Fix an inforrect constant in ft4_rx() that skipped over first 0.208 s of Rx data. 2019-03-13 10:31:23 -04:00
Joe Taylor
e9a999cda1 Use the "TU; ..." message when starting another FT4 QSO almost right away. 2019-03-12 11:09:49 -04:00
Steve Franke
7a0823301a Remove some temporary code. 2019-03-09 10:03:01 -06:00
Joe Taylor
69675153a7 FT4 sequencing seems OK now (but needs thorough testing). No "TU;" msgs yet. 2019-03-07 14:36:58 -05:00
Joe Taylor
87826d1a6c Clean up some FT4 code. 2019-03-07 11:21:17 -05:00
Joe Taylor
ff0b6a03a4 Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2 2019-03-05 09:22:08 -05:00
Steve Franke
d7012267c0 CQ message type strings are now passed from mainwindow.cpp to ft4_decode.f90, to enable AP decoding of special CQ messages. 2019-03-04 17:10:57 -06:00
Joe Taylor
89cffbc959 Move the call to processMessage() to correct place in ft4Data(). 2019-03-04 10:11:55 -05:00
Joe Taylor
871ff3892b Use "CQ SCC ..." for Tx6 message if RTTY RU Exch = SCC. 2019-02-28 11:42:28 -05:00
Joe Taylor
6b5131ab5e Trial changes to support messages for Slovenian Contest Club's RTTY-like contest. 2019-02-28 11:21:06 -05:00
Bill Somerville
278c544a6a Merge branch 'develop' into feat-ft2 2019-02-26 11:52:14 +00:00
Steve Franke
fdca7c2dcb Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2 2019-02-25 15:03:55 -06:00
Steve Franke
3759198982 Remove ramp-up and ramp-down symbols. Instead, shape the first 1/8th of first and last real symbols. 2019-02-25 15:03:43 -06:00
Joe Taylor
fdfb655b06 Option to select "Low sidelobes" or "Most sensitive" for waterfall spectra. 2019-02-25 15:04:05 -05:00
Bill Somerville
ad75db3e06 Merge tag 'wsjtx-2.0.1' into develop 
WSJT-X v2.0.1 GA release
 2019-02-25 03:15:56 +00:00
Bill Somerville
c60fbc11b6 Fix samples CMake script and update NEWS and copyright dates 
Preparation for v2.0.1 GA release.
 2019-02-25 03:07:51 +00:00
Bill Somerville
a12e71f352 Merge branch 'master' into develop 2019-02-25 00:44:58 +00:00
Joe Taylor
25bfa3798a Transmit FT8 using a gaussian-filtered waveform. 2019-02-22 13:39:39 -05:00
Joe Taylor
aeddaeab9e FT4 now transmits a waveform generated from Gaussian-filtered frequency changes. 2019-02-21 12:10:27 -05:00
Joe Taylor
57a20f838f Remove the code that builds an ADIF file from FoxQSO.txt. 2019-02-21 10:24:58 -05:00
Joe Taylor
d5a1671210 FT4 decoding interval is now 288 ms. Saving of FT4 files is somewhat rationalized. 2019-02-21 10:08:18 -05:00
Bill Somerville
fd7bca080a Revert to direct Log QSO invocation rather than deferred for Fox logging 
Deferring using a 0mS timer does not work for Fox logging as it may be
invoked  more  than   once  in  a  loop  when   multiple  streams  are
active.  This change  directly  calls the  logging member  function(s)
inside the message processing loop.

This change  was initially  made because  an unhelpful  database query
order along with a need to display the latest logged QSO at the bottom
of the  Fox log table view  was causing GUI unresponsiveness  when the
Fox log table had many rows.  The current implementation shows the Fox
log table view in descending time  order with the latest logged QSO at
the top  which avoids this  unresponsiveness issue (tested with  a Fox
log table with over 15,000 rows).
 2019-02-20 19:40:36 +00:00
Joe Taylor
f1e7b0c30a Add (temporary?) code for converting FoxQSO.txt to an ADIF log. 2019-02-20 10:43:30 -05:00
Joe Taylor
c2cb55a68a Reduce FT4 chunk size fro 500 to 288 ms; suppress duplicate decodes from close to chunk ends. 2019-02-13 14:42:57 -05:00
Bill Somerville
8a1ff9e1a3 Reset QSO start time when aborting a QSO or clearing messages (ESC and F4) 2019-02-13 18:47:31 +00:00
Steve Franke
cbfcb76193 AP decoding basically works. Make data_dir setting work on the Mac. 2019-02-07 18:48:38 -06:00
Steve Franke
71cb6d9f50 Use 4 different Costas arrays to prevent false syncs as received frames move 
through the analysis window.

Add a random 77-bit vector to each message so that tone transitions occur
even if the message contains a long string of 0 or 1 (like a CQ).

Add alternative sync calculation as an option (sync2), for testing.

Add basic framework for AP decoding.
 2019-02-05 19:18:50 -06:00
Bill Somerville
4dfc4685e9 Make the UDP protocol Clear (3) message two-way 
External servers can clear either or  both of the Band Activity and Rx
Frequency decodes windows. This was  requested by Dave, AA6YQ, so that
DX Lab  Suite applications can  clear old  decodes on band  changes to
ensure that decode highlighing is consistent.
 2019-02-03 00:49:35 +00:00
Bill Somerville
846918e3aa Remove normal mouse double-click action for decode display windows 
The normal  action selects the word  under the mouse pointer  and this
disrupts   callsign  highlighting.    Normal  single-click   selection
behaviour is unchanged  so text can still be selected  using the mouse
and copied if desired.
 2019-02-02 20:38:56 +00:00
Joe Taylor
22209030e2 Move files all_ft4.txt and clockit.out to the data_dir directory. 2019-02-01 11:56:08 -05:00
Joe Taylor
04f085bb24 Proper handling of multiple decodes from one call to ft4_decode. 2019-01-31 13:55:21 -05:00
Joe Taylor
a80b955fe7 Decode FT4 over the full frequency range displayed in waterfall. 2019-01-31 12:10:58 -05:00
Joe Taylor
a7ded94313 Saved FT4 files must be at least 5 s long; Shift+F6 now works for FT4 files. 2019-01-29 15:24:08 -05:00
Joe Taylor
e11acde9fb Better handling of calls to ft4_decode(), depending on ring-buffer pointer. 2019-01-29 14:19:22 -05:00
Joe Taylor
3ab7c1edf6 Don't logQSO or transmit in response to a decode from disk. 2019-01-29 13:19:36 -05:00
Joe Taylor
65398bbffa Fix the UTC display on waterfall, for FT4 mode. 2019-01-29 12:12:54 -05:00
Joe Taylor
6d6e2e8314 Don't try to transmit a blank FT4 message! 2019-01-29 11:49:11 -05:00
Joe Taylor
e98231d4c1 Correct the call to genft4(); fix the displayed time for data from disk. 2019-01-29 10:39:34 -05:00
Joe Taylor
7a9240c9ef Basic saving of .wav files for FT4. 2019-01-28 15:58:14 -05:00
Joe Taylor
d5203e2da9 Code cleanup. 2019-01-28 14:20:32 -05:00
Joe Taylor
2e4035c8bb Insert red line on waterfall to mark an FT4 transmission. 2019-01-28 13:50:23 -05:00
Joe Taylor
7da4fc63a6 Add freq markers for FT4 to Wide Graph. Tentative default FT4 freqs for 40m and 20m. 2019-01-28 11:07:52 -05:00
Joe Taylor
6e4f0f32ee Remove FT2; implement basic functionality in FT4. 2019-01-28 10:19:46 -05:00
Joe Taylor
f6e3dbb8e9 Increase the FT2 Tx duration timer from 2200 to 2500 ms. 2019-01-25 16:52:38 -05:00
Joe Taylor
a0ddc1485e Make the ProgressBar invisible in FT2 mode. 2019-01-24 17:29:03 -05:00
Joe Taylor
edf4af5307 Be sure to set start time of QSO. 2019-01-24 15:58:08 -05:00
Joe Taylor
a9100f0291 Log FT2 QSOs when they are finished. 2019-01-24 13:02:47 -05:00
Joe Taylor
e55a8baa25 Minor tweaks to FT2 auto-sequencing and writes to all.txt. 2019-01-24 12:38:02 -05:00
Joe Taylor
c8cdd05f34 Implement auto-sequencing for FT2. 2019-01-24 11:58:57 -05:00
Joe Taylor
3fa7c7b9a7 More work on integrating FT2 (will become FT4?) into WSJT-X. Not finished! 2019-01-23 16:53:03 -05:00
Joe Taylor
14db0d682b Make double-clicking of decodes to work in FT2 mode. 2019-01-23 10:51:26 -05:00
Joe Taylor
50c1daf61f Use a timer to establish length of an FT2 (to be FT4?) transmission. 2019-01-23 10:09:18 -05:00
Joe Taylor
568fc0810e Tx now works, more or less, in FT2 mode. Needs testing! 2019-01-18 16:22:25 -05:00
Joe Taylor
5f03d97a9e Implement basic Rx capability for FT2 in WSJT-X. 2019-01-18 11:51:15 -05:00
Bill Somerville
5137b47c0a Switch off nag window for develop 2019-01-16 20:44:04 +00:00
Bill Somerville
0932ddaba1 Merge branch 'hotfix-2.0.1-rc1' into develop 2019-01-16 20:33:59 +00:00
Bill Somerville
b3d6871786 Minor changes to support Qt versions >=10 2019-01-14 19:47:08 +00:00
Joe Taylor
d8a5d84647 Disable the startup message about upgrading to v2.0. 2019-01-09 09:05:21 -05:00
Joe Taylor
b3a8930eef Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2019-01-09 08:48:22 -05:00
Joe Taylor
e12eabb65f Clear labAz on program startup. 2019-01-09 08:47:29 -05:00
Joe Taylor
5f38d30c75 Add "Erase WSPR hashtable" to the Filemenu. 2019-01-08 15:41:59 -05:00
Bill Somerville
e871860642 Option to always start new decode periods at the top of the Band Activity window 2019-01-08 18:03:43 +00:00
Joe Taylor
9226d0829f Correct a flaw in validating contest exchange data when logging. 2019-01-08 08:40:40 -05:00
Joe Taylor
949c5deda5 Refactor code that writes to ALL.TXT and ALL_WSPR.TXT. Iincludes better formatting. 2019-01-03 12:15:48 -05:00
Bill Somerville
5b0f713cd4 Defer dwonloading LoTW users file until "Settings->Colors->Fetch" button pressed 
This change also repairs a defect in showing potential LoTW users when
the  "Settings->General->Show DXCC,  grid, and  worked before  status"
option is not checked.
 2019-01-01 16:19:01 +00:00
Joe Taylor
90617b29ab Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2018-12-31 10:39:26 -05:00
Joe Taylor
9d0473f1e8 Include grid in Tx1 messages with <hisCall>, such as "<DF2018ARDF> K1JT FN20". 2018-12-31 10:37:36 -05:00
Bill Somerville
8c13df2bc6 Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2018-12-30 12:36:52 +00:00
Bill Somerville
12299957d7 Add Fox log ADIF export to the Fox Log window log table contextual pop up menu 2018-12-30 12:35:41 +00:00
Joe Taylor
8379fa86eb Optional key bindings for F1 through F5, especially for contest use. 2018-12-28 11:19:29 -05:00
Joe Taylor
cabd6bc869 Boost all message letters to upper case, even if tx6 editing is not 'finished'. 2018-12-27 14:44:50 -05:00
Joe Taylor
ba83ae0587 Retain CQ messages like "CQ xxxx K1ABC FN42", where xxxx is 1-4 letters or 1-3 digits. 2018-12-27 13:14:01 -05:00
Bill Somerville
a2ce15d4b1 Allow recevied signal reports from compound calls to be logged 2018-12-23 23:51:48 +00:00
Joe Taylor
c1b1daf9db Allow the logQSO dialog to modify "Rcvd" in NA VHF mode and have the changes flow through to N1MM. 2018-12-20 12:42:39 -05:00
Joe Taylor
9fd64f48de Allow the logQSO dialog to modify "Exch Sent" or "Rcvd" in RTTY mode and have the changes flow through to N1MM. 
Something similar should be done for other contest modes.
 2018-12-20 12:03:22 -05:00
Bill Somerville
d241217737 Add QDarkStyleSheet to Message Aggregator reference application 2018-12-17 01:48:45 +00:00
Bill Somerville
4fbefb9e99 Remove extraneous MainWindow UI element 2018-12-16 01:30:55 +00:00
Bill Somerville
97e04fd7e1 Merge branch 'master' into develop 2018-12-10 18:46:12 +00:00
Bill Somerville
b2cb2e1d2e Repair regression in Log QSO power and comments retention 2018-12-10 18:44:57 +00:00