Commit Graph

203 Commits

Author SHA1 Message Date
Joe Taylor
f932f2a1da Wrong version of ipcomm.cpp was saved?
Running multiple instances now checked out in Linux, as well as Windows.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3496 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-19 00:44:48 +00:00
Joe Taylor
fb7948a836 Full activation of "Multiple Instances", thanks to some code by
Josh Rovero, KK1D.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3495 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-19 00:23:40 +00:00
Joe Taylor
8f3c9a672b Further optimizations of the decoders, and some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3492 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-17 19:13:36 +00:00
Joe Taylor
f10ef57c7d 1. Double-click on a yellow Tx message should not copy the message again,
and if CTRL is held down it should set Tx as well as Rx freq.  Fixed.
2. Improve the logic for suppressing duplicate JT65 decodes.
3. Disable the "Advanced" item on Setup menu.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-17 14:18:18 +00:00
Joe Taylor
ac44bacd91 1. Allow waterfall window to have smaller height.
2. Speed improvement in JT9 decoder.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3488 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-16 18:17:20 +00:00
Joe Taylor
600c3e228c Apply sigital gain slider to spectra sent to waterfall.
Update the User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3477 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-10 15:46:27 +00:00
Joe Taylor
ecfc15f3e4 Add calls to timer().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-09 16:22:25 +00:00
Joe Taylor
bfe9e49e03 Clean up two warning messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3469 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-09 16:05:23 +00:00
Joe Taylor
0f9dc17a8f Remove qDebug() statements.
Use ptt_() function included in getfile.cpp.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 23:32:20 +00:00
Joe Taylor
a4cc4f4101 Warning: these changes have not yet been thoroughly tested!
1. Correct the TxMode label on program startup.
2. Insert TxMode (not RxMode) into the "Transmitting..." lines in ALL.TXT.
3. Put TxMode in wsjtx_status.txt.
4. F4 clears Az, Dist, and all Tx messages as well as DxCall and DxGrid.
5. Make it possible to decode JT9 in the "JT65 region", and vice-versa, with
   directed double-click on signal in waterfall.
6. Improved logic for enabling/disabling TestPTT button on setup screen.
7. Do not call getFreq() when TestPTT is activated under CAT control.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 19:57:01 +00:00
Joe Taylor
3dc6abc0c1 Merging code for v1.1 back into the main wsjtx branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3462 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 13:17:22 +00:00
Joe Taylor
207116f574 1. Implement PTT control via HRD.
2. Fix two more g95 compiler warnings.
3. Remove some unused code in getfile.cpp.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3305 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-23 14:52:51 +00:00
Joe Taylor
bfef326b25 Oops! Add jt9b.f90
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3304 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-23 14:44:36 +00:00
Joe Taylor
f95ab994c0 Eliminate all compiler warnings from gfortran, in Ubuntu 12.04.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3301 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-23 13:33:29 +00:00
Joe Taylor
e3921407bd 1. Forgot to add the code for jt9c.f90, which was separated from
jt9a.F90 in order to suppress a compiler warning.
2. Updated Makefile.linux.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3300 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-23 12:45:33 +00:00
Joe Taylor
d9d9047cb0 Clean up all g95 compiler warnings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3299 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-23 01:05:37 +00:00
Joe Taylor
3699ac36bf Some minor code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3298 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-22 20:21:38 +00:00
Joe Taylor
bfcbce34a7 Convert all *.f files to *.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3296 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-22 15:39:28 +00:00
Joe Taylor
b226f532d4 1. Dashed line between decoding periods.
2. Tweak four2a for compilation on 64-bit systems.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3287 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-21 11:43:01 +00:00
Joe Taylor
9890731f4f 1. De-activate submodes JT9-5, JT9-10, and JT9-30. (This makes the shared
memory region smaller by some 150 MB.)
2. Some code cleanup (removing unused lstrong, etc.)...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-20 14:09:02 +00:00
Joe Taylor
6646005f20 Preparing for more tests of JT9 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3282 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 19:35:29 +00:00
Joe Taylor
8f9e5283a2 Removed red3, was not useful.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3280 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 15:16:29 +00:00
Joe Taylor
a75430865e Diasble diagnostic writes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3278 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 01:35:36 +00:00
Joe Taylor
2ccb9206b0 1. Remove the "color highlight left window" option.
2. Re-establish the pxdb measurement for Thermo.
3. Double-click on decoded line copies it to QSO window (unless it's 
   already there).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 23:52:04 +00:00
Joe Taylor
7cb0731dc6 Reduce ntol.
Add "red3" (but not yet using it).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3275 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 19:01:16 +00:00
Joe Taylor
057287fab1 Many changes to the procedures for selecting decodable candidate JT9 signals.
This code may be the new benchmark?


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3274 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 16:02:00 +00:00
Joe Taylor
1f82d75194 Change to symspec() was not a good idea.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3273 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 19:45:55 +00:00
Joe Taylor
1fc406b8a0 Remove diagnostic prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 19:13:31 +00:00
Joe Taylor
9d30c88a6f Another try at optimizing choices for decoding. Not done yet!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3271 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 19:03:49 +00:00
Joe Taylor
bd103459f1 Added routine "chkss2" to test sync vector for sanity before attenpting
Fano decode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 15:17:36 +00:00
Joe Taylor
85af134fd1 More (temporary) adjustments to decode parameters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3269 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 11:37:25 +00:00
Joe Taylor
cba66a9242 Move Tune button to right of "Halt Tx".
Tweak decoding parameters in sync9.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3268 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 22:47:32 +00:00
Joe Taylor
f195dda223 1. Minor corrections to plotter.cpop and widegraph.cpp.
2. New algorithm for 'sync9'.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3267 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 17:42:25 +00:00
Joe Taylor
f1d6248c46 Temporary code, to aid with a series of tests of the JT9 decoder.
This commit will serve as a benchmark for comparison with new code to
be written.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3266 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 14:29:01 +00:00
Joe Taylor
e881b10ce3 Another possible window function (presently commented out).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3264 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-08 19:08:05 +00:00
Joe Taylor
a5695a142e Better window function (lower sidelobes) for displayed spectra.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3263 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-08 18:38:31 +00:00
Joe Taylor
abaf1e3c5b Update Makefile.linux
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3262 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-08 15:31:31 +00:00
Joe Taylor
f9f180818c Fix freq readout for JT9-2.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3258 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-07 12:29:22 +00:00
Joe Taylor
25001c1ee7 Gray-out the "Polling interval" control if CAT is not enabled.
UPdate Makefile.MinGW.
Much work new on User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3251 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-02 16:19:26 +00:00
John T Nogatch
bac7ce6874 split calculation requires r be real, not int
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3250 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-01 16:53:43 +00:00
Joe Taylor
6d7a552f43 Update Makefile.MinGW.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3227 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-26 16:45:11 +00:00
Joe Taylor
4a7d5d38c7 1. Fixed a bug causing seemingly random crashes when compound callsign
is decoded.
2. Fixed minor bug in the "Test PTT" function.
3. Background of DialFrequency label goes red if frequency differs from
default for this band by mode than 10 kHz.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3208 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-24 17:55:33 +00:00
Joe Taylor
d092f7eae3 Further code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3199 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-22 15:43:02 +00:00
Joe Taylor
1b810b4f9a General code clean-up to eliminate compiler warnings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3198 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-22 15:08:20 +00:00
Joe Taylor
e6adce61e2 Minor changes in scaling of spectra for waterfall.
Corrected typo in unix code.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3197 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-18 20:12:04 +00:00
Joe Taylor
c393c10678 Removed the bi-directional CAT control: an unsuccessful experiment.
Removed an unhelpful change to decoder().


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3193 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-17 14:53:58 +00:00
Joe Taylor
dac3e3d8a0 Fine-tuning work on decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3181 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-16 18:33:38 +00:00
Joe Taylor
80ba5dcea3 Add fillcom.f90
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3178 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-16 16:38:25 +00:00
Joe Taylor
39f7b5b65e Bring standalone behavior of jt9(.exe) closer to that of its
behavior when using WSJT-X shared memory.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3176 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-16 16:25:14 +00:00
Joe Taylor
da5576ae3d Fix problem with "Tune" at startup. status
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3174 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 23:42:42 +00:00