Commit Graph

210 Commits

Author SHA1 Message Date
Joe Taylor
76e8f5ec85 In place of the qra64 return code as is, display a number that increases monotonically with the amount of a priori information used.
Here's the translation, as a lookup table.  The displayed number is the tens
digit of the number of a priori bits.

rc  APxx  displayed
-------------------
0     0      0
1    27      2
2    42      4
3    29      2
4    44      4
5    57      5
6    29      2
7    44      4
8    72      7
9    55      5
10   70      7
11   70      7



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7325 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 16:51:11 +00:00
Joe Taylor
72dfe01bf3 Working on QRA64 sync, snr estimates, etc., for QRA64 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7321 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-15 21:39:55 +00:00
Joe Taylor
a251c045e3 Rationalize several VHF-oriented features of the JT4 and JT64 decoders. More additions to the User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7227 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 20:48:24 +00:00
Joe Taylor
87d4f2fdbc Use bVHF rather than single_decode to control display of params at end of decode line.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 15:25:25 +00:00
Joe Taylor
f5737348fe Good decode implies sync OK. Also some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6949 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-26 16:44:35 +00:00
Joe Taylor
77e295d36d Plot a red "sync" curve in QRA64 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6876 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-06 14:18:23 +00:00
Joe Taylor
63fa30b0b2 A few more renames, QRA65 --> QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6849 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 12:48:27 +00:00
Joe Taylor
bb1e8f6692 Minor tweaks to QRA sync handling.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6844 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 15:25:41 +00:00
Joe Taylor
e23017d9e3 Improving the QRA sync-detect algorithm.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6843 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 15:16:00 +00:00
Joe Taylor
0384d312a6 Temporary mode QRA02 is now basically functional (though buggy).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6833 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 20:38:36 +00:00
Joe Taylor
529ad6eec9 First functional decoder for QRA01.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6805 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 14:36:03 +00:00
Bill Somerville
5e7b750ac3 Initialize decode counts before decoding
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 23:39:19 +00:00
Joe Taylor
22340f66e4 Suppress some compiler warnings. (More to come...)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6748 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 19:39:48 +00:00
Joe Taylor
27fb2d8126 Minor cleanups and corrections to the JT4 and JT65 decoders when
using deep search and/or averaging.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6696 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-24 16:00:00 +00:00
Joe Taylor
4bcc4f35a1 Much improved detection of sync in JT4 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6686 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-19 19:19:47 +00:00
Joe Taylor
1531f3ad3b New format for end-of-line flags in JT4 and JT65; starting work on
establishing sync in JT4.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6685 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-19 16:13:51 +00:00
Joe Taylor
6bbfb0e1f1 Mark JT4 Fano decodes with 'f'.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6680 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 19:33:33 +00:00
Joe Taylor
f5cec462d4 Resolve more issues for display of JT4 decodes; improve JT4 sync at low spread.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6679 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 18:34:57 +00:00
Joe Taylor
f82ee7c4e3 Correct several VHF/UHF/Microwave items on Rex's list. Specifically:
1. Allow display of JT65 single-line decodes when there is also an
   average decode.
5. Do not call JT4 deep search if Fano decode has succeeded.
7. Fix occasional Fortran error seen with the "#" (nflip=-1) sync.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6678 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 17:19:27 +00:00
Bill Somerville
a45ea3cdff Adjust decodes displays and processing for extra csync indicator after mode
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 18:53:00 +00:00
Bill Somerville
8bced492e6 Remove premature inclusion of padding space character in JT9 decodes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 01:32:38 +00:00
Bill Somerville
e59af9a781 Strip out callback arguments that are constant and known to the callback implememtation
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6671 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 01:32:30 +00:00
Joe Taylor
1af1a2d97e If not in single-decode mode, display only the first character of csync.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6669 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 00:00:54 +00:00
Joe Taylor
bff84e0e37 Use '$' to flag JT4 mode in the 2-character csync.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6668 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-04 18:59:18 +00:00
Joe Taylor
a402645e75 Remove unused code from sh65.f90. Make csync a 2-character flag.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6666 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-04 18:16:09 +00:00
Joe Taylor
8cef34fe11 Starting to implement decoding of JT65 shorthand messages. Needs testing!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6665 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-03 20:30:49 +00:00
Joe Taylor
4346f0ef97 Enable JT65 decodes with the 'OOO' sync pattern.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6663 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-03 16:10:22 +00:00
Joe Taylor
1a9c6b3b6f Correct a problem with flagging supposedly bad data when reference spectrum
is used.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6624 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-18 14:15:09 +00:00
Joe Taylor
c7dfc1ee00 1. Protect against wrong ID of f0 being fit by lorentzian(), when Ftol is large.
2. When switching to JT65 mode, go through JT9 first.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6621 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-14 13:22:05 +00:00
Bill Somerville
e565e1796a Clean up some compiler warnings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6591 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 22:37:22 +00:00
Bill Somerville
53308a941b Make flag variables boolean types especially those passed between languages
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6585 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:19 +00:00
Joe Taylor
e212367221 First decodes of wide/slow JT9 submodes from within wsjtx.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6577 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-05 14:17:34 +00:00
Joe Taylor
cb8eeba835 Add submode to argument list of JT9 subroutine decode().
Add test program fersum; several tweaks to fer65.
Code cleanup in lorentzian, and return chisqr in a(5).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6567 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-01 17:57:08 +00:00
Joe Taylor
af0d04ef72 Minor tweaks to logic for displaying Avg and DS decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6552 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-23 15:08:00 +00:00
Joe Taylor
3e091fca99 Improved GUI control and display of averaged and hinted decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6548 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-22 14:12:59 +00:00
Joe Taylor
846ddf9039 1. Clean up GUI features releted to message averaging and deep search.
2. Make averaging and DS separately selecteble.
3. Clear nftt and avemsg on Clear Avg.
4. Allow fer65 to handle message averaging.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6543 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-21 16:03:11 +00:00
Joe Taylor
331402213a Several changes for single-decode behavior:
1. Use "f" to flag FT decodes, 'h' for hinted decodes.
2. Let "Experience-based" checkboxes activate hinted decoding.
3. Singls-sequence decodes go to left window, average decodes to right.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-20 19:32:08 +00:00
Joe Taylor
9f388b63dc Many changes in aid of decoding signals with significant Doppler spread
in submodes JT65B, C.  More changes still to come!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6535 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-17 13:28:57 +00:00
Joe Taylor
04e765c605 Replace all "common/test00?" with "use jt65_mod", etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6515 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 14:25:22 +00:00
Joe Taylor
1288e64137 Further progress on JT65 decoding with averaging and variable smoothing.
Please note: it's far from finished!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6513 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-09 21:01:28 +00:00
Joe Taylor
eb076718f2 First working code that uses wider detection bandwidths for submodes JT65B,C.
Still needs work!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6507 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-07 20:00:23 +00:00
Joe Taylor
1a0cbd4d9d Oops! Did not intend to commit decoder.f90 with diagnostic "write(79..." activated.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-02 18:41:41 +00:00
Joe Taylor
4aca6bb594 Clarify text for labels 'Auto-Tx-Enable Armed', etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6338 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-02 18:36:07 +00:00
Joe Taylor
c7e3fa09e3 Comment out the "write(79)..." lines.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6332 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-01 15:35:00 +00:00
Joe Taylor
fecffe8ed8 Force naggressive=0 when in JT9+JT65 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6331 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-01 15:33:48 +00:00
Joe Taylor
5bfa43f46f Merge improvements to the FT algorithm into Bill's new structure for
the Fortran routines.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6328 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-31 01:30:31 +00:00
Bill Somerville
0bc01a19b1 Fix JT4 averaging regression
Fell  into the  Fortran  trap for  C/C++  programmers, automatic  SAVE
attribute on default initialized variables.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6326 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-30 14:57:50 +00:00
Bill Somerville
d431e2cecd Restructuring in preparation for direct decoder invocation from wsjtx
Re-factor the JT4, JT65 and JT9 decoders as Fortran modules using type
bound  procedures, the  decoder types  implement a  callback procedure
such that he client of the decoder can interpret the decode results as
they need.

The JT4 decoder has a  second callback that delivers message averaging
status.  Also the  previously separate  source files  lib/jt4a.f90 and
lib/avg4.f90 have been merged  into lib/jt4_decode.f90 as private type
bound procedures of the new jt4_decoder type.

Re-factored the lib/decoder.f90 subroutine  to utilize the new decoder
types. Added local procedures to process decodes and averaging results
including the necessary OpenMP synchronization directives for parallel
JT9+JT65 decoding.

Added the  jt65_test module  which is  a basic  test harness  for JT65
decoding. Re-factored  the jt65 utility  to utilize the  new jt65_test
module.

Changed a  few integers  to logical variables  where their  meaning is
clearly binary.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6324 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-29 23:52:55 +00:00
Bill Somerville
f416a52def Make Fortran profiling timer function a callback with a default null implementation
Groundwork for calling the decoders directly from C/C++ threads.

To  access   the  timer   module  timer_module   must  now   be  used.
Instrumented code need  only use the module function  'timer' which is
now a  procedure pointer that  is guaranteed to be  associated (unless
null()  is assigned  to it,  which should  not be  done). The  default
behaviour of 'timer' is to do nothing.

If a  Fortran program  wishes to  profile code it  should now  use the
timer_impl module  which contains a default  timer implementation. The
main program should call 'init_timer([filename])' before using 'timer'
or     calling     routines     that     are     instrumented.      If
'init_timer([filename])'.  If it is called  then an optional file name
may  be  provided  with  'timer.out'  being used  as  a  default.  The
procedure 'fini_timer()' may be called to close the file.

The default  timer implementation is  thread safe if used  with OpenMP
multi-threaded code  so long as  the OpenMP  thread team is  given the
copyin(/timer_private/) attribute  for correct operation.   The common
block /timer_private/ should  be included for OpenMP  use by including
the file 'timer_common.inc'.

The module 'lib/timer_C_wrapper.f90' provides  a Fortran wrapper along
with 'init' and 'fini' subroutines  which allow a C/C++ application to
call timer instrumented  Fortran code and for it  to receive callbacks
of 'timer()' subroutine invocations.  No C/C++ timer implementation is
provided at this stage.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-27 15:40:57 +00:00
Bill Somerville
d5bc774641 Get rid of jt9com and npar common blocks
Also  use correct  C binding  and have  compilers determine  sizes and
offsets.

The wsjtx.exe program now owns the  decoder shared data that is shared
with symspec.  It is now in  struct dec_data, still a  global variable
for now but hopefully a MainWindow member variable soon.

The struct  dec_data (in both C/C++  and Fortran) has a  sub structure
with the decoder  parameters which enables copying  and manipulating a
lot cleaner.

New  of  changed types  of  shared  data  must  still be  modified  in
commons.h and a  new file lib/jt9com.f90, they must stay  in sync as a
pointer to the structure is passed between C and Fortran.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6290 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-17 20:29:55 +00:00
Joe Taylor
256feedd95 Correct the second calling sequence to jt65a().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6286 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-17 00:47:55 +00:00
Joe Taylor
9af174642b Send mycall, hiscall, hisgrid downstream to extract.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-16 19:31:12 +00:00
Joe Taylor
b87c77ddf1 Make erasure pattern exponents work, the intended way. :-)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6280 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-16 01:07:07 +00:00
Steven Franke
f281d082bf Make odd erasure pattern exponents work.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6279 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-16 00:49:47 +00:00
Joe Taylor
b557035d0c Send parameters for experience-based decoding to jt9[.exe].
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6181 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-25 20:09:57 +00:00
Bill Somerville
eb1004ec76 Remove more KVASD remnants
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6173 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-24 19:46:59 +00:00
Joe Taylor
4680817a93 Separate variables for the decoding parameters that had been packed into ndepth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-24 15:05:45 +00:00
Steven Franke
c9ad0c3038 Add robust sync checkbox to Advanced setup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6151 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 15:27:14 +00:00
Bill Somerville
1a23757b26 Reintegrate merge from wsjtx_exp branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-18 01:28:12 +00:00
Bill Somerville
34f8924cfc Reintegrate the wsjtx_exp branch into the trunk
This  merge brings  the WSPR  feature development  into the  main line
ready for release in a future v1.6 release.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-27 13:08:28 +00:00
Bill Somerville
a51c5c4251 Reintegrate Joe's experimental VHF & up features
As at ^/branches/wsjtx_exp@5271



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-22 17:48:03 +00:00
Joe Taylor
2aa42f0414 Minor tweaks in JT9 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4989 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-24 20:19:04 +00:00
Bill Somerville
f59dc6d089 Ensure prompt output of decoded messages
Outputo buffer flush commands have been added after each decoded message output
to ensure that other processes get timely updates of newly decoded messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4948 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-10 14:04:47 +00:00
Joe Taylor
3fdde76420 The "big FFTs" should be computed only once for each new set of Rx data.
This requires setting newdat=0 after the big FFT is computed.  In the OMP
code this must be done separately for each mode; so new variables newdat9 
and newdat65 have been defined.  Both are set to "newdat", the value
forwarded from the GUI, each time jt9[_omp][.exe] goes into action. 


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4946 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-08 15:07:31 +00:00
Bill Somerville
d1a1510fc8 Make output arguments of decoders shared between threads
This is only a temporary fix  becuase if both decoders were to produce
results  that need  accumulating  e.g. number  of  decodes, then  more
complex code to merge the results would be needed.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4940 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-06 16:34:26 +00:00
Bill Somerville
1271243952 Thread safe lib/timer.f90
Accounts for each traced call per thread and accumulates by rolling up
calls with an identical call chain before printing the statistics. The
print now accounts for function calls  in their call chain so the same
function will be reported more than  once if it is called in different
places.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4937 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-05 22:07:19 +00:00
Bill Somerville
36ad50735b Fix typo that disabled JT65 decoding in dual mode.
Disable timer.out generation in OpenMP builds as it is broken.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4931 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-04 16:33:45 +00:00
Bill Somerville
a7c4d1001f Adjust the jt9 decoder to do the right decodes in parallel
Also limit the required threads for parallel decoding to 2.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4930 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-04 15:34:46 +00:00
Bill Somerville
91b909b581 Thread safety enhancements to jt9
Serialize thread unsafe FFTW3 calls

Serialize FFTW3 plan initializations in four2a

Serialize decoder results output to file/console

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4928 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-04 01:41:26 +00:00
Bill Somerville
ffdeafe3bb Build an OpenMP version of jt9 where possible
This change  introduces the program jt9_omp  which is a testbed  for a
multi-threaded version of the jt9 decoder program. The program jt9_omp
should be  a directly substitutable for  jt9 except that JT65  and JT9
decodes are computed in parallel.

Also enable  the OpenMP directives in  decoder.f90 - note this  is not
yet a working multi-threaded decoder and the existing jt9 is still the
correct decoder to be used in WSJT-X.

Increased the available  stack size for jt9_omp.exe as this  is a hard
limit on  Windows and  the default  is not big  enough for  the OpenMP
version of jt9.

Also  Fortran  array  bounds  checking is  now  disabled  for  Release
configuration builds so as to improve performance a little.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4922 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-02 11:24:20 +00:00
Joe Taylor
3d112ab26c Change some calls to timer().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4921 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-01 20:11:10 +00:00
Joe Taylor
94472ac31c Many changes in program jt9[.exe] aimed at speeding up the decoders.
The long FFTs can now use the multi-threaded FFTW routines.
Subroutine decode9.f90 was renamed jt9fano.f90.
The JT9 decoder's top-level functions were removed from decoder.f90
and put into a separate subroutine decjt90.f90.
Subroutine decoder.f90 is now configured for possible use of OpenMP 
SECTIONS, with the JT9 and JT65 decoders running concurrently on
a multi-core machine.  Note, however, that this concurrent processing 
is not yet fully implemented.  Probably calls to timer need to be removed; 
some variables used in calls to jt65a and decjt9 may need to be 
declared PRIVATE in decoder; some sections probably need to be declared 
CRITICAL; probably some SAVE statements in downstream routines have
made them not thread-safe; etc., etc.  

I'm a neophyte at using OpenMP.  Comments, suggestions, and/or tests by
others will be welcome!



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4919 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-01 16:23:36 +00:00
Bill Somerville
f37ed4cd78 Take advantage of the new KVASD v1.12
Pass the  temporary directory to  jt9 and use  it to give  the correct
paths  to  temporary files.  Also  jt9  passes  the absolute  path  to
kvasd.dat in the temporary directory to kvasd.

Clear out all the annoying cruft that has accumulated due to having to
run with $CWD as the temporary directory.

Use QStandardPaths  to find the  writable data directory  where needed
rather than passing it around  between objects. This now works because
the $CWD hasn't been changed.

Do away with the CMake option WSJT_STANDARD_FILE_LOCATIONS as it is no
longer needed.

Fix astro status file azel.dat formatting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-03 00:06:54 +00:00
Joe Taylor
4fea8ebd0c Optimizations of JT9 and JT65 decoders; change clock in timer routine.
Both decoders now have slightly better performance and faster
execution.  The rare "duplicate decodes" in JT9 were eliminated.
On Windows, at least, calls to f90 routine system_clock() do not
provide correct wall time increments.  Changed to using secnds()
instead.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4571 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-30 19:29:16 +00:00
Joe Taylor
345d13ef54 Always allow JT65 decoding above the blue line, when in JT9+JT65 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4198 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-09 12:58:12 +00:00
Bill Somerville
0e6ca32fe2 Open decoded.txt in append mode when redoing a decode pass.
Before the subsequent decodes on a period (nagain/=0) were truncating
the file and confusing JTAlert.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4047 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-20 02:44:47 +00:00
Bill Somerville
9247e10115 Added support for use of "Standard" locations for writable files.
This allows  writable files  to be  located in  the "correct"
         location for  each platform rather  than in the  directory of
         the  executable  which, in  general,  is  not recommended  or
         allowed in some cases.

         A preprocessor macro  WSJT_STANDARD_FILE_LOCATIONS is used to
         switch be tween old and new functionality, currently it is on
         by default.  It  can be turned off by defining  it to a false
         value (0)  or more simply  with cmake-gui setting  the option
         with  the same  name.  JTAlert  can  only work  with the  old
         non-standard file  locations until  Laurie VK3AMA  chooses to
         support the new file locations.

         Even  if the  above is  not  enabled; the  QSettings file  is
         written to a  user specific location so it will  be shared by
         all instances  of the  program (i.e.  across  upgrades).  See
         below for multiple concurrent instance support changes.

Added a command line parser module for Fortran.

         Added 'lib/options.f90'  to facilitate more  complex argument
         passing to jt9 to cover explicit file locations.

Changed the way multiple concurrent instances are handled.

         This is  to allow the program  to be run multiple  times from
         the same installation directory.

         A new wsjtx command line  optional argument is available "-r"
         or  "--rig"   which  enables  multiple   concurrent  instance
         support.  The  parameter of the  new option is a  unique name
         signifying  a rig  or equivalent.   The name  is used  as the
         shared memory segment key and  in window titles.  The name is
         also used to  access unique settings files  and writable data
         files like ALL.TXT  and log files.  No attempt  has been made
         to share these files between concurrent instances.

         If  "-r" or  "--rig" is  used  without a  parameter it  still
         enables  multiple   concurrent  instance  support   for  that
         instance.  All instances must use  a unique parameter, one of
         which may be empty.

         The        rig       name        is       appended        the
         QCoreApplication::applicationName() for convenient usage like
         window titles.

Set non Qt locale to "C".

         This ensures that C library functions give consistent results
         whatever the  system locale is set  to.  QApplication follows
         the system locale as before.  Thus using QApplication and its
         descendants  like widgets  and QString  for all  user visible
         formating will give correct l10n and using C/C++ library will
         give consistent formatting across locales.

Added top level C++ exception handling to main.cpp.

         Because  the   new  transceiver  framework   uses  exceptions
         internally, the main function now handles any exceptions that
         aren't caught.

Retired devsetup, replaced with Configuration.

         Configuration  is  a  class  that encapsulates  most  of  the
         configuration  behavior.   Because  rig configuration  is  so
         closely coupled with rig operation, Configuration serves as a
         proxy  for   access  to  the  rig   control  functions.   See
         Configuration.hpp  for  more  details  of  the  Configuration
         interface.

Menu changes.

         Various checkable  menu actions moved  from main menu  to the
         Configuration  dialog.   The  whole settings  menu  has  been
         retired with  the single  "Settings..."  action moved  to the
         file  menu  for  consistency  on  Mac  where  it  appears  as
         "Preferences" in line with Mac guidelines.

New data models for data used by the application.

         ADIF amateur band parameters,  free text message macros, spot
         working   frequencies  and,   station  information   (station
         descriptions and transverter offsets per band) each implement
         the  QAbstractItemModel interface  allowing them  to be  used
         directly with  Qt view widgets  (Bands.hpp, FrequencyList.hpp
         and, StationList.hpp).  Configuration  manages maintenance of
         an instance of  all but the former of the  above models.  The
         ADIF band  model is  owned by  Configuration but  requires no
         user maintenance as it is immutable.

Band combo box gets more functionality.

         This  widget is  now an  editable QComboBox  with some  extra
         input capabilities.

         The popup list is still the list of spot working frequencies,
         now  showing the  actual  frequency decorated  with the  band
         name.  This  allows multiple  spot frequencies  on a  band if
         required.

         The  line edit  allows direct  frequency entry  in mega-Hertz
         with  a completer  built  in to  suggest  the available  spot
         working frequencies.   It also  allows band name  entry where
         the  first  available  spot working  frequency  is  selected.
         Recognized band names are those  that are defined by the ADIF
         specification and  can be found  in in the  implementation of
         the ADIF bands model (Bands.cpp).

         If an out of band frequency  is chosen, the line edit shows a
         warning red  background and the  text "OOB".  Out of  band is
         only defined  by the  ADIF band limits  which in  general are
         wider than any entities regulations.

Qt 5.2 now supports default audio i/p and o/p devices.

         These devices are placeholders  for whatever the user defines
         as the  default device.   Because of  this they  need special
         treatment as  the actual device  used is chosen at  open time
         behind the scenes.

Close-down behavior is simplified.

         The close-down  semantics were broken such  that some objects
         were not being shut down cleanly, this required amendments to
         facilitate correct close down of threads.

User font selection added to Configuration UI.

         Buttons to set the application font and the font for the band
         and  Rx frequency  activity widgets  have been  added to  the
         Configuration UI to replace the file based font size control.

Free text macros now selected directly.

         The free text line edit  widgets are now editable combo boxes
         that have  the current free  text macro definitions  as their
         popup  list.   The old  context  menu  to  do this  has  been
         retired.

Astronomical data window dynamically formatted and has font a chooser.

         This window is now autonomous,  has its own font chooser and,
         dynamically resizes to cover the contents.

Double click to Tx enabled now has its own widget in the status bar.

QDir used for portable path and file name handling throughout.

The  "Monitor", "Decode",  "Enable  Tx" and,  "Tune"  buttons are  now
checkable.

         Being checkable allows these  buttons control their own state
         and rendering.

Calls to PSK Reporter interface simplified.

         In   mainwindow.cpp  the   calls   to   this  interface   are
         rationalized to just 3 locations.

Manipulation of ALL.TXT simplified.

         Moved, where possible, to common functions.

Elevated frequency types to be Qt types.

         Frequency  and FrequencyDelta  defined as  Qt types  in their
         meta-type system  (Radio.hpp).  They  are integral  types for
         maximum accuracy.

Re-factored rig control calls in mainwindow.cpp.

         The new  Configuration proxy  access to rig  control required
         many changes  (mostly simplifications) to the  MainWindow rig
         control code.  Some  common code has been  gathered in member
         functions   like   qsy(),   monitor(),   band_changed()   and
         auto_tx_mode().

Rig control enhancements.

         The  rig control  for  clients interface  is  declared as  an
         abstract    interface   (See    Transceiver.hpp).    Concrete
         implementations of this interface are provided for the Hamlib
         rig  control library,  DX Lab  Suite Commander  via a  TCP/IP
         command channel, Ham  Radio Deluxe also via  a TCP/IP command
         channel and, OmniRig via its Windows COM server interface.

         Concrete Transceiver implementations are expected to be moved
         to a separate thread after construction since many operations
         are blocking  and not suitable  for running in a  GUI thread.
         To facilitate this all  instantiation of concrete Transceiver
         instances are handled by  Configuration using a factory class
         (TransceiverFactory)   for   configuration  parameter   based
         instantiation.

         Various   common  functionality   shared  by   different  rig
         interface implementations  are factored out into  helper base
         classes that  implement or delegate parts  of the Transceiver
         interface.  They  are TransceiverBase  which caches  state to
         minimize expensive rig commands, it also maps the Transceiver
         interface  into a  more  convenient  form for  implementation
         (template methods).  PollingTransceiver that provides a state
         polling   mechanism  that   only   reports  actual   changes.
         EmulateSplitTransceiver  that  provides  split  operation  by
         QSYing on PTT state changes.

         EmulateSplitTransceiver can  be used with  any implementation
         as  it follows  the GoF  Decorator pattern  and can  wrap any
         Transceiver implementation.

         OmniRigTransceiver is  derived directly  from TransceiverBase
         since  it doesn't  require  polling due  to its  asynchronous
         nature.  OmniRigTransceiver is only built on Windows as it is
         a COM server client.  To build  it you must first install the
         OmniRig     client     on     the     development     machine
         (http://www.dxatlas.com/omnirig/).

         DXLabSuiteCommanderTransceiver          derives          from
         PollingTransceiver since  it is a  synchronous communications
         channel.   No  third  party  library  is  required  for  this
         interface.

         HRDTransceiver also derives from PollingTransceiver.  The HRD
         interface  library has  been  reverse  engineered to  provide
         functionality with  all available versions of  HRD.  No third
         party libraries are required.

         HamlibTransceiver  likewise  derives from  PollingTransceiver
         since  the Hamlib  asynchronous interface  is non-functional.
         Although this  class will interface with  the release version
         of Hamlib (1.2.15.3);  for correct operation on  most rigs it
         needs to  run with the  latest master branch code  of Hamlib.
         During development many changes to Hamlib have been submitted
         and accepted,  hence this requirement.  Hamlib  source can be
         obtained from git://git.code.sf.net/p/hamlib/code  and at the
         time of writing he master branch was at SHA 6e4432.

         The Hamlib interface directly calls the "C" interface and the
         modified rigclass.{h,cpp} files have been retired.

         There is a rig type selection of "None" which may be used for
         non-CAT  rigs, this  is actually  a connection  to the  dummy
         Hamlib device.

         PollingTransvceiver   derives    from   TransceiverBase   and
         TransceiverBase derives from the Transceiver interface.

         Each interface implementation offers  some possibility of PTT
         control via  a different serial  port than the CAT  port.  We
         also support PTT  control directly via a  second serial port.
         This is done  by delegating to a dummy  Hamlib instance which
         is   only   used   for   PTT  control.    This   means   that
         DXLabSuiteCommanderTransceiver,       HRDTransceiver      and
         OmniRigTransceiver  always  wrap  a  dummy  HamlibTransceiver
         instance.  The  factory class TransceiverFactory  manages all
         these constructional complexities.

         Serial port  selection combo  boxes are  now editable  with a
         manually  entered value  being  saved to  the settings  file.
         This allows  a non-standard  port device  to be  used without
         having to edit the settings file manually.

         For TCP/IP  network CAT  interfaces; the network  address and
         port  may  be specified  allowing  the  target device  to  be
         located on a different machine  from the one running wsjtx if
         required.  The  default used when  the address field  is left
         blank is the correct one for normal usage on the local host.

         Selecting a polling  interval of zero is  no longer possible,
         this  is because  the rig  control capability  can no  longer
         support one way connection.  This  is in line with most other
         CAT control software.

         In the Configuration dialog there are options to select split
         mode  control  by  the  software  and  mode  control  by  the
         software.  For  the former  "None", "Rig"  and "Fake  it" are
         available,  for  the latter  "None",  "USB"  and, "Data"  are
         available.  Because  tone generation is implicitly  linked to
         split mode  operation; it is  no longer possible to  have the
         software in split  mode and the rig not or  vice versa.  This
         may mean some rigs cannot be used in split mode and therefore
         not in dual JT65+JT9 until  issues with CAT control with that
         rig are  resolved.  Single  mode with VOX  keying and  no CAT
         control are still possible so even the most basic transceiver
         setup is supported as before.

         Configuration now  supports a  frequency offset  suitable for
         transverter   operation.     The   station    details   model
         (StationList.hpp) includes  a column  to store an  offset for
         each band if required.

CMake build script improvements.

         The CMakeLists.txt from the  'lib' directory has been retired
         with its  contents merged into the  top level CMakeLists.txt.
         Install  target support  has been  greatly improved  with the
         Release build  configuration now building a  fully standalone
         installation  on Mac  and Windows.   The Debug  configuration
         still   builds   an   installation   that   has   environment
         dependencies for  external libraries, which is  desirable for
         testing and debugging.

         Package target  support is largely complete  for Mac, Windows
         and, Linux, it should be possible to build release installers
         directly from CMake/CPack.

         Cmake FindXXXX.cmake  modules have been added  to improve the
         location of fftw-3 and Hamlib packages.

         Version numbers are now stored in Versions.cmake and work in
         concert with automatic svn revision lookup during build.  The
         version string becomes 'rlocal'± if there are any uncommitted
         changes in the build source tree.

Moved resource like files to Qt resources.

      	 Because location of resource files  (when they cannot go into
      	 the  installation directory  because of  packaging rules)  is
      	 hard to standardize.  I have used the Qt  resource system for
      	 all ancillary data files. Some  like kvasd.dat are dumped out
      	 to the temp (working directory)  because they are accessed by
      	 an external program, others like the audio samples are copied
      	 out so  they appear in  the data directory under  the default
      	 save directory.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
Joe Taylor
86591544f0 Merge changes from branches/wsjtx_w back into branches/wsjtx.
Note to developers: Not sure about the makefiles...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3835 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 18:20:40 +00:00
Joe Taylor
784e246557 1. Fix a bug that could cause decoder to hang when presented with
bad data.

2. Fix a bug that could allow a Koetter-Vardy false decode instead of
a valid Berlekamp-Massey decode, sometimes leading to program crash.

3. Many more edits in the User's Guide, *.adoc files.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3664 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-27 21:28:54 +00:00
Joe Taylor
67f19ac73f Sorry, r3540 introduced a bug that preventer JT65 decoding in some
situations.  It's fixed now.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3541 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-09 23:11:05 +00:00
Joe Taylor
a8acd97f42 1. Correct bug that prevented save/restore of Wide Graph geometry.
2. Fix jt9 so that decoding starts at fStart (which now may be non-zero).
3. Improved or new Tool Tips for some GUI controls.
4. Updates to User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3540 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-09 17:22:08 +00:00
Joe Taylor
8f3c9a672b Further optimizations of the decoders, and some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3492 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-17 19:13:36 +00:00
Joe Taylor
ac44bacd91 1. Allow waterfall window to have smaller height.
2. Speed improvement in JT9 decoder.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3488 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-16 18:17:20 +00:00
Joe Taylor
a4cc4f4101 Warning: these changes have not yet been thoroughly tested!
1. Correct the TxMode label on program startup.
2. Insert TxMode (not RxMode) into the "Transmitting..." lines in ALL.TXT.
3. Put TxMode in wsjtx_status.txt.
4. F4 clears Az, Dist, and all Tx messages as well as DxCall and DxGrid.
5. Make it possible to decode JT9 in the "JT65 region", and vice-versa, with
   directed double-click on signal in waterfall.
6. Improved logic for enabling/disabling TestPTT button on setup screen.
7. Do not call getFreq() when TestPTT is activated under CAT control.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 19:57:01 +00:00
Joe Taylor
3dc6abc0c1 Merging code for v1.1 back into the main wsjtx branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3462 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 13:17:22 +00:00
Joe Taylor
9890731f4f 1. De-activate submodes JT9-5, JT9-10, and JT9-30. (This makes the shared
memory region smaller by some 150 MB.)
2. Some code cleanup (removing unused lstrong, etc.)...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-20 14:09:02 +00:00
Joe Taylor
6646005f20 Preparing for more tests of JT9 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3282 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 19:35:29 +00:00
Joe Taylor
8f9e5283a2 Removed red3, was not useful.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3280 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 15:16:29 +00:00
Joe Taylor
a75430865e Diasble diagnostic writes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3278 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 01:35:36 +00:00
Joe Taylor
7cb0731dc6 Reduce ntol.
Add "red3" (but not yet using it).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3275 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 19:01:16 +00:00
Joe Taylor
057287fab1 Many changes to the procedures for selecting decodable candidate JT9 signals.
This code may be the new benchmark?


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3274 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 16:02:00 +00:00
Joe Taylor
1fc406b8a0 Remove diagnostic prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 19:13:31 +00:00
Joe Taylor
9d30c88a6f Another try at optimizing choices for decoding. Not done yet!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3271 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 19:03:49 +00:00
Joe Taylor
bd103459f1 Added routine "chkss2" to test sync vector for sanity before attenpting
Fano decode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 15:17:36 +00:00
Joe Taylor
85af134fd1 More (temporary) adjustments to decode parameters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3269 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 11:37:25 +00:00
Joe Taylor
cba66a9242 Move Tune button to right of "Halt Tx".
Tweak decoding parameters in sync9.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3268 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 22:47:32 +00:00
Joe Taylor
f195dda223 1. Minor corrections to plotter.cpop and widegraph.cpp.
2. New algorithm for 'sync9'.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3267 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 17:42:25 +00:00
Joe Taylor
f1d6248c46 Temporary code, to aid with a series of tests of the JT9 decoder.
This commit will serve as a benchmark for comparison with new code to
be written.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3266 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 14:29:01 +00:00
Joe Taylor
f9f180818c Fix freq readout for JT9-2.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3258 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-07 12:29:22 +00:00
Joe Taylor
d092f7eae3 Further code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3199 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-22 15:43:02 +00:00