The use of QTextEdit::toPlainText() converts non-break spaces to
normal spaces so was breaking the use of that character to delineate
appended info. Since using QTextEdit::toPlainText() is an unnecessary
operation as the decoded text can be more amenably accessed through
the QDocument and QTextBlock interface without any translation, this
is an improvement which should have some performance impact when many
decodes are stored in the decodes windows.
(cherry picked from commit da643fa43e)
Double-click on "CQ K9AN EN50" mistakenly put EN50 into DXcall.
Enable Tx was turned off after 73 is sent.
Sh mode did not auto-sequence correctly.
Received exchange not logged correctly in EU VHF mode.
The v8 compiler has an ABI change where the charlen hidden arguments
change from int to size_t type.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8528 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Now that a way of dealing with worked before and country information
without losing this information has been found.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8110 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Message generation in contest mode now generates the correct Tx3 for
type 2 calls.
"<type-2> 73" is a free text so needed special handling in message
processing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8064 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Generic message packing and unpacking routines now understand antipode
grid contest messages. These messages are now recognized as standard
messages in message response processing and dealt with appropriately
when contest mode is selected and applicable (currently FT8 and MSK144
only).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8062 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Double-clicks on 73 messages fixed. Fixed issue with incorrect decode
being selected by double-click. Refined auto-sequencing sign off
handling, any 73 or rr73 free text near Rx or Tx frequency taken as a
73 from QSO partner but if a standard message then must be from QSO
partner.
Moved functionality from MainWindow to DecodedText class.
More efficient picking of messages from decoded text windows by
extracting the text block directly.
Tighten up use of RR73 and skipping Tx1, these are now disabled for
relevant compound calls where they would break the QSO exchange.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
73 messages from other QSOs on frequency should now be ignored rather
than being processed.
Also some long overdue refactoring and tidying of non-idiomatic C++
code in the logbook directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8047 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The UDP decode and reply message have been augmented with a boolean
flag denoting a low confidence decode when set. Existing clients can
safely use the reply message without passing the flag as the default
value will still action messages that have high confidence. If low
confidence decodes are to be passed back via the reply message then
the low confidence flag must be included and correctly set to match
the original decode.
See NetworkMessage.hpp for message fields and meanings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
moves the Rx frequency to theirs, this facilitates calling a station
who is busy and may have many callers on their frequency. Updated the
corresponding mouse shortcuts help text.
Allow for times with seconds when parsing fast mode and FT8 decodes.
Exclude the RR73 grid square from and grid validation or matching, it
is not a grid square any more as far as WSJT-X is concerned, it is an
RRR substitute.
Add a simple state machine for QSO progress such that replies and
auto-sequencing can be better controlled.
Get compound callsign edge cases working again and allow QSOs from and
to compound callsign holders working in as many situations as possible
including auto-sequencing and FT8 auto-reply mode. This does mean
that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx
frequency will be taken as a reply to a CQ call despite it not being
explicitly addressed back to the CQ caller. Compound callsigns should
work in MSK144 contest mode also as well as in short code modes with
some minor restrictions (short codes will not be used where
configuration demands that a message be used to send a full compound
callsign).
Auto sequencing has been made generic such that it can be used for
more than one mode if desired.
Allow the use of free text messages to sign off in auto sequenced QSOs
without the message being overwritten by the sequencer. Double click
actions have been added to the Tx5 radio and push buttons to revert
back to the default standard 73 message.
Make DisplayText class interface more idiomatic C++ and simplify a
bit.
Fixed some displayed widget arrangements for different modes and
sub-modes so that they are consistent when starting up and when
switching mode or sub-mode.
This is a big change which has been extensively tested but no doubt
there will also be some new defects introduced.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
CQ NNN ... and CQ aa ... are coalesced to CQ_NNN ... and CQ_aa ... so
as to keep the word count and indexes consistent with plain CQ ..., DE
... and QRZ ... standard message forms when parsing messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7356 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also relax entry validation so it is easier to enter standard message
forms longer than 13 characters into message entry line edits.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7294 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Do not adjust Rx Freq automatically after an MSK144 decode.
3. Insert the Rcvd report in log window.
4. Send MSK144 decodes to PSK Reporter.
NB: not all these are fully tested, yet.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Highlight, in the CQ colour, CQDX ... and QRZ ... messages and
process correctly for worked before and DXCC entity.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6753 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
More consistent and accurate processing of compund callsigns including
recognizing the user's call in both base and fully qualified form,
extracting reports from special type one and type two compound call
messages. Ensure that "CQ DX" message prefixes are recognized and
processd correctly.
The cycle of double clicking through a QSO has been enhanced to
recognoize the standard messages correctly and use the correct next
message. The automatic transmission button "Enable Tx" now does what
it says and does not double as a stop transmit button. This allows the
current transmission to complete even if the automatic transmission
feature is disabled. In line with this the "stop sending after a 73
message is sent" feature turns off the automatic transmission enable
at the start of the sending of a 73 message and also the next message
is now set up as the CQ message automatically in this scenario. A 73
message is now either a standard message containing the word "73" or
any free text message containing "73" (not necessarily as a distinct
word").
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Option to control standard message generation for type 2 compound
callsign holders.
Process decoded messages based on either base or full callsign for
both DE and DX callsigns.
Change CW id when callsign changed in settings.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5000 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. The main window can be expanded wider to allow those with large screens to use larger fonts
3. New class DecodedText handles the formatted text from decoder.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3564 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
