Commit Graph

6892 Commits

Author SHA1 Message Date
Bill Somerville
014812e6c6
UDPDaemon command line flag to list network interfaces 2020-11-02 22:08:37 +00:00
Bill Somerville
93d1e17005
Extend UDP MessageServer client mapping key with the host address
The UDP Example reference applications  now work correctly with WSJT-X
instances with duplicate --rig-name= command line arguments so long as
duplicate instances are run on unique hosts.
2020-11-02 21:35:48 +00:00
Bill Somerville
430d57c1ca
Network interface selection for outgoing UDP multicast datagrams
Default  selection  is  the  loop-back interface.  Users  who  require
interoperation  between  WSJT-X   instances  cooperating  applications
running on different hosts should  select a suitable network interface
and  carefully choose  a multicast  group address,  and TTL,  that has
minimal scope covering the necessary  network(s). Using 224.0.0.1 is a
reasonable    strategy    if   all    hosts    are    on   the    same
subnet. Administratively  scoped multicast group addresses  like those
within 239.255.0.0/16  can cover larger  boundaries, but care  must be
taken if the local subnet has access to a multicast enabled router.

The  IPv4  broadcast  address  (255.255.255.255) may  be  used  as  an
alternative  to multicast  UDP, but  note that  WSJT-X will  only send
broadcast UDP datagrams  on the loop-back interface,  so all recipient
applications must be running on the same host system.

The reference UDP Message protocol  applications are being extended to
be configurable  with a list of  interfaces to join a  multicast group
address on. By default they will only join on the loop-back interface,
which is also  recommended for any applications designed  to take part
in the WSJT-X  UDP Message Protocol. This allows full  user control of
the  scope of  multicast  group membership  with  a very  conservative
default  mode  that will  work  with  all interoperating  applications
running on the same host system.
2020-11-02 15:33:44 +00:00
Bill Somerville
072da278ee
Documentation updates 2020-10-29 22:40:19 +00:00
Bill Somerville
6f2449f510
Doc updates 2020-10-28 23:32:49 +00:00
Bill Somerville
2b40da70cb
Initial check in of a recipe to prepare to build WSJT-X on MS Windows. 2020-10-28 22:06:08 +00:00
Bill Somerville
befbaa6ae9
Reasonable default values for NB setting for command line jt9
Use the -X command option to set  single decode mode and to set the NB
level.

    -X 256*(n+3)+s

Where s=32  selects single decode mode,  and 'n' is the  equivalent NB
setting as used in the WSJT-X UI.  Default for both is zero in FST4(W)
mode if no -X option is passed. E.g. -X 544 selects single decode with
NB=-1 (256*(-1+3)+32).
2020-10-26 20:28:39 +00:00
Bill Somerville
731fe53a1e
Reasonable default values for NB setting for command line jt9
Use the -X command option to set  single decode mode and to set the NB
level.

    -X 256*(n+3)+s

Where s=32  selects single decode mode,  and 'n' is the  equivalent NB
setting as used in the WSJT-X UI.  Default for both is zero in FST4(W)
mode if no -X option is passed. E.g. -X 544 selects single decode with
NB=-1 (256*(-1+3)+32).
2020-10-26 20:20:52 +00:00
Bill Somerville
66e9102d67
Repair regression with UDP spotting to PSK Reporter
Recover correctly from broken connections, i.e. do nothing for UDP.
2020-10-23 04:38:29 +01:00
Bill Somerville
ab90585e46
Cosmetic change 2020-10-23 04:38:29 +01:00
Bill Somerville
c0f11fb67b
Repair regression with UDP spotting to PSK Reporter
Recover correctly from broken connections, i.e. do nothing for UDP.
2020-10-23 04:36:28 +01:00
Bill Somerville
5efe448a9c
Cosmetic change 2020-10-23 03:32:22 +01:00
Bill Somerville
3888b0d0bb
Add --freq-tolerance (-F) jt9 option 2020-10-23 03:26:31 +01:00
Bill Somerville
308d815fb5
Add --freq-tolerance (-F) jt9 option 2020-10-23 03:24:19 +01:00
Bill Somerville
5df39726b6
Updated URLs for recommended Windows Open SSL installers 2020-10-23 01:41:37 +01:00
Bill Somerville
99def213d2
Updated URLs for recommended Windows Open SSL installers 2020-10-23 01:40:38 +01:00
Bill Somerville
8cb6fc6098
Fetch LoTW Users data on start up if it is missing 2020-10-23 01:36:51 +01:00
Bill Somerville
0f10a58b84
Fetch LoTW Users data on start up if it is missing 2020-10-23 01:35:40 +01:00
Bill Somerville
c444cb2409
Merge branch 'release-2.3.0' into develop 2020-10-21 13:37:37 +01:00
Bill Somerville
2a2e120d7c
Repair invalid string references 2020-10-21 13:09:10 +01:00
Bill Somerville
e99f22a5d2
Revert to previous stack reservation on Windows to accommodate F/H 2020-10-21 13:08:03 +01:00
Bill Somerville
5e3b931086
Better executable description for jt9
This  maintains the  sort order  in the  Windows Task  Manager summary
background applications list.
2020-10-21 11:48:24 +01:00
Bill Somerville
a4cbde10cb
Better executable description for jt9
This  maintains the  sort order  in the  Windows Task  Manager summary
background applications list.
2020-10-21 11:46:45 +01:00
Bill Somerville
6c077397dc
Adjust Windows stack and heap reservations for FST4(W) code 2020-10-21 01:37:19 +01:00
Bill Somerville
4757ee4506
Adjust Windows stack and heap reservations for FST4(W) code 2020-10-21 01:36:00 +01:00
Bill Somerville
f2bbf98cbb
Update WSPRnet.org posts to allow mode to be determined
The  sent/received 'mode'  parameter  posted to  WSPRnet.org has  been
amended as follows:

        WSPR-2:     "2"
        FST4W-120:  "3"
        FST4W-300:  "5"
        FST4W-900:  "16"
        FST4W-1800: "30"

this change is designed to maintain backwards compatibility with older
versions of WSJT-X  and other software like WSPR-X  which already post
these values:

        WSPR-2:     "2"
        WSPR-15:    "15"

It is  expected that the  WSPRnet.org server  side will be  updated in
sync with  a WSJT-X  v2.3.0 RC2  (or GA) release  to account  for this
change.
2020-10-20 12:50:13 +01:00
Bill Somerville
52b2084882
Update WSPRnet.org posts to allow mode to be determined
The  sent/received 'mode'  parameter  posted to  WSPRnet.org has  been
amended as follows:

        WSPR-2:     "2"
        FST4W-120:  "3"
        FST4W-300:  "5"
        FST4W-900:  "16"
        FST4W-1800: "30"

this change is designed to maintain backwards compatibility with older
versions of WSJT-X  and other software like WSPR-X  which already post
these values:

        WSPR-2:     "2"
        WSPR-15:    "15"

It is  expected that the  WSPRnet.org server  side will be  updated in
sync with  a WSJT-X  v2.3.0 RC2  (or GA) release  to account  for this
change.
2020-10-20 12:43:45 +01:00
Bill Somerville
adcb021941
Compatibility with older Qt versions 2020-10-20 02:21:54 +01:00
Bill Somerville
9b1695285d
Compatibility with older Qt versions 2020-10-20 02:21:08 +01:00
Bill Somerville
ccb7a1adf5
Repair defect with response to UDP Reply(4) messages with AP markers 2020-10-18 02:11:04 +01:00
Bill Somerville
8d088cf4f5
Repair defect with response to UDP Reply(4) messages with AP markers 2020-10-18 02:09:17 +01:00
Bill Somerville
40ac1f2e41
Merge branch 'develop' into feat-boost-log 2020-10-14 21:02:00 +01:00
Bill Somerville
c50133bcfc
Honour "Settings->General->Disable Tx after sending 73" if not auto-sequencing 2020-10-14 21:01:05 +01:00
Bill Somerville
62e089aecf
Honour "Settings->General->Disable Tx after sending 73" if not auto-sequencing 2020-10-14 20:59:32 +01:00
Bill Somerville
d8b16b31f4
Merge branch 'develop' into feat-boost-log 2020-10-13 19:20:37 +01:00
Bill Somerville
90b3fa2a46
Merge branch 'release-2.3.0' into develop 2020-10-13 16:51:40 +01:00
Bill Somerville
518207da3b
Various updates to UDP Message Protocol handling for FST4W
Corresponding updates to the message_aggregator reference application.
2020-10-13 16:46:38 +01:00
Bill Somerville
b12e9004bb
Make settings trace output human readable 2020-10-11 00:03:10 +01:00
Bill Somerville
477b99ea45
Correct a log message 2020-10-11 00:02:49 +01:00
Bill Somerville
5a7291b690
Abort incomplete DNS lookup at shut down 2020-10-11 00:02:08 +01:00
Bill Somerville
1dd5838f50
Cosmetic reformatting 2020-10-10 15:15:10 +01:00
Bill Somerville
5824b3e9d8
Logger TimeStamp attribute uses UTC 2020-10-10 14:38:54 +01:00
Bill Somerville
0b800c9ca2
Fix merge error 2020-10-10 14:38:32 +01:00
Bill Somerville
c551b93cc7
Merge branch 'develop' into feat-boost-log 2020-10-10 14:07:22 +01:00
Bill Somerville
1995d762bb
Add Version Info resources to Windows executables where needed.
Version information  and more  in the  Windows resources  for main
    applications, installer and un-installer.

    Update  CMake   policies  for  new  project()   command,  and  DEB
    dependency changes

    Support  older  libgfortran  packages,  and  other  Linux  package
    dependencies.

    Use new project description file in Debian packaging.

    Linux packaging dependency adjustments  for Debian style packages,
    including  a machine  readable  Debian  copyright format,  project
    description in separate file for  CPack compatibility, and use for
    DEB packaging.

    Configure check for need to link libm Standard C Math Library.

    CMake compatibility for <3.17.
2020-10-10 13:58:53 +01:00
Bill Somerville
5f2ba00bb8
Add Version Info resources to Windows executables where needed.
Version information  and more  in the  Windows resources  for main
    applications, installer and un-installer.

    Update  CMake   policies  for  new  project()   command,  and  DEB
    dependency changes

    Support  older  libgfortran  packages,  and  other  Linux  package
    dependencies.

    Use new project description file in Debian packaging.

    Linux packaging dependency adjustments  for Debian style packages,
    including  a machine  readable  Debian  copyright format,  project
    description in separate file for  CPack compatibility, and use for
    DEB packaging.

    Configure check for need to link libm Standard C Math Library.

    CMake compatibility for <3.17.
2020-10-10 13:38:15 +01:00
Bill Somerville
ed92d0811a
Implement "No own decodes" functionality for FST4W mode 2020-10-10 13:18:04 +01:00
Bill Somerville
d9c992943a
Fix CMake warning when using new configurations 2020-10-10 13:17:21 +01:00
Bill Somerville
41fa614324
Bump RC number 2020-10-07 19:16:48 +01:00
Bill Somerville
d15e419993
Allow UDP service port zero, this disables the UDP Message Protocol 2020-10-07 19:16:00 +01:00