Commit Graph

851 Commits

Author SHA1 Message Date
Joe Taylor
39b3b6cb0e Starting to add EME Echo mode. (Not yet functional!)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5522 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 16:42:38 +00:00
Bill Somerville
786e53efee Only show WSPR transmitting message when configured to show Tx messages
Also changed  the default for the  "Tx messages to Rx  window" setting
true.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5521 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 11:32:25 +00:00
Bill Somerville
a3b60ecb7b WSPR band hopping improvements
Added a per band Rx only flag.
Added Tx 100% as special case.
Only do  tune up if  not an Rx  only band and  if not scheduled  to Tx
already.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5520 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 10:58:36 +00:00
Bill Somerville
23d58d98a3 Polish the UI for WSPR and WSPR band hopping
Provide  a  dialog for  band  hopping  scheduling which  replaces  tab
four. Ensure that split mode is  not used for WSPR. Select the correct
tab  for WSPR  operation.  Shift WSPR  band hopping  code  out of  the
MainWindow class.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 01:45:40 +00:00
Joe Taylor
c9f2efa667 Fix the displayed tone-range markers on transition from WSPR to JT65.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5515 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-03 20:21:34 +00:00
Steven Franke
53e31668e7 Fix a typo. Transmiting->Transmitting.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 23:40:54 +00:00
Joe Taylor
c4909d52b0 Pass absolute file path for JPLEPH to astrosub_().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5494 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 15:59:52 +00:00
Joe Taylor
793068c55f Back out the r5491 changes to where Doppler is applied. They were wrong!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5493 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 14:06:26 +00:00
Joe Taylor
7a537887df Reinstall code to mark WSPR transmissionsa yellow dividing line.
Re-order several lines of code so that Doppler frequency updates
occur before PTT is asserted.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 00:23:17 +00:00
Bill Somerville
d7c88608a4 UDP free text message clicks the tx5 next radio button
This change allows a server to change the free text message and cue it
for transmission in  teh next period when  using tab 1. For  tab 2 the
behaviour is unchanged  and this message simply changes  the free text
message text.  The action if  the send option  is set on  this message
remains unchanged in that  it clicks the tx5 send now  button im tab 1
or the free text message radio button on tab 2 i.e. send ASAP.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5483 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-01 11:34:50 +00:00
Bill Somerville
332e65329b Fix band hopping regression
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5478 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 13:39:28 +00:00
Joe Taylor
95195377c6 Strip trailing "m" from command sent to "user_hardware" script.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5477 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 12:56:50 +00:00
Bill Somerville
340ec6b38a Allow nummeric only band names in band hopping setup
This change allows the old and new format to coexist.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5476 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 12:47:15 +00:00
Bill Somerville
7abcef5057 Add FrequencyList methods to retrieve band name sets
Start to rationalize the new WSPR code with the data models.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5475 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 11:51:40 +00:00
Bill Somerville
f1858dbb4f Improvements to models and delegates
Trying to  find the  sweet spot  for completeness,  usefulness, safety
and,  performance  from  the  various  custom  item  models  and  item
delegates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5474 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 11:51:31 +00:00
Steven Franke
41010d05eb Try letting hopping.f90 determine TX intervals
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5472 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 23:45:22 +00:00
Joe Taylor
a032723a7d Test, with no changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 23:23:04 +00:00
Joe Taylor
89f67f3d54 WSPR-mode behavior changes.
Forbid consecutive Tx sequences.
Mark Tx sequences with horizontal yellow line in waterfall.
Reduce the wait time in msleep() command (mainwindow.cpp line 4342).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 16:08:20 +00:00
Bill Somerville
b9740e3a8e Convert character strings to QString where necessary
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5469 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 01:04:15 +00:00
Steven Franke
7118372667 Commit wspr tone frequency patch and fix GrayLineDuration typo
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 19:23:54 +00:00
Joe Taylor
e78975f037 Simplify installation section of User Guide and make the Windows,
Linux, and OS X sub-sections similar in appearance.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5457 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 14:20:06 +00:00
Bill Somerville
3aba7b3a52 Fix WSPR band hopping defect
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5456 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 13:44:04 +00:00
Bill Somerville
79416fb2c5 Fix access to underlying data of the frequency list
A better approach to this area will follow.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5455 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 09:29:54 +00:00
Bill Somerville
a1a6d1bc06 Add mode dependent working frequencies
Working frequencies are mode dependent  and a reset to defaults button
has been added.

Also re-factored much of the model  and item delegate code to simplify
several  of the  model  implementations. Introduced  a single  routine
called from main to register the custom types with Qt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 23:22:17 +00:00
Joe Taylor
0a2823b611 Better logic for WSPR scheduling. Don't overwrite a grid6 with grid4
obtained by double-clicking on a decode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5452 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 22:58:24 +00:00
Bill Somerville
a6c8e76808 Made the UDP message to change the free text message optionally send ASAP
This  message now  has  the ability  to simply  change  the free  text
message or to change the message and send it ASAP.

The message_aggregator reference UDP server application exercises this
feature by sending a new free  text message on any edit and requesting
it be sent  by WSJT-X when editing is finished  i,e, RETURN pressed or
focus moved away.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5445 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 17:33:39 +00:00
Bill Somerville
1ea149532b Respond to clicks on Gen/Free radio buttons even if checked
The generated and free text radio buttons now refresh the sent message
even if teh clicked radio button is already checked.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5444 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 15:44:03 +00:00
Joe Taylor
c68ade4c13 Temporary diagnostics.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5436 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 00:26:48 +00:00
Bill Somerville
f9d0a1863a Reintegrate the wsjtx_exp branch into the trunk
This  merge brings  the WSPR  feature development  into the  main line
ready for release in a future v1.6 release.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-27 13:08:28 +00:00
Bill Somerville
155c9ab576 Added flag to halt Tx UDP reply
The  reply  can now  be  used  to  turn off  auto  Tx  or to  halt  Tx
immediately. Also enforced the accept UDP requests setting for halt Tx
and set free text message replies.

Merged from the wsjtx-1.5 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5336 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-06 22:25:56 +00:00
Bill Somerville
d67dfc9738 Added UDP replies to halt Tx and set free text message
Also added Tx status to status UDP message.

Added   the    above   features   to   the    reference   UDP   server
message_aggregator.

Merged from the wsjtx-1.5 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5334 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-06 20:30:29 +00:00
Bill Somerville
559873ea2b ------------------------------------------------------------------------
r5297 | bsomervi | 2015-04-26 17:26:54 +0100 (Sun, 26 Apr 2015) | 49 lines

Various defect repairs and ambigous behaviour clarifications

A regression introduced in v1.5.0-rc1 where PTT on an alternate serial
port when using no CAT control is resolved.

A regression introduced  in v1.5.0-rc1 where the  network server field
was not being restored in the settings dialog has been resolved.

In settings the "Test PTT" button is now styled  by checked state.

The  "Test PTT"  button is  enabled without  needing click  "Test CAT"
first when no CAT rig control is selected.

Various parts of the settings dialog  are now disabled when no CAT rig
control is selected. These are the "Mode" group, the "Split Operation"
group and the "Monitor returns to last used frequency" check box. None
of  these have  any  visible impact  nor make  sense  without CAT  rig
control.

Initialization and teardown of rig  control internals has been revised
to avoid several problems related to timing and when switching between
different  CAT  settings. This  includes  improvements  in having  the
operating frequency restored  between sessions when not  using CAT rig
control.

The  initialization   of  OmniRig   connections  has   been  improved,
unfortunately it is  still possible to get an  exception when clicking
the  "Test  CAT" button  where  just  clicking  "OK" and  leaving  the
settings dialog will probably work.

Some unnecessary  CAT commands output  during direct rig  control have
been elided to reduce the level of traffic a little.

The handling of  some automatically generated free  text messages used
when the station is a type 2  compound callsign or is working a type 2
compound callsign has  been improved. This is related to  how a double
click  on  a  message  of  the   form  "DE  TI4/N0URE  73"  is  double
clicked. The  new behaviour depends  on whether the current  "DX Call"
matches the  call in the message.   This resolves the ambiguity  as to
whether this message  is a sign off  at the end of a  QSO with current
operator (a 73  message is generated) or a tail  end opportunity where
the message should be treated the same  as a CQ or QRZ message (WSJT-X
QSYs  to the  frequency, generates  messages and  selects message  one
ready to call).  This still  leaves some potential ambiguous behaviors
in  this complex  area but  selecting "Clear  DX call  and grid  after
logging" should resolve most of them.

Rig  control trace  messages have  been cleaned  up and  are now  more
helpful, less verbose and, tidier in the source code.
------------------------------------------------------------------------

Merged from the wsjtx-1.5 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5298 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-26 16:41:12 +00:00
Bill Somerville
3430648727 Reintegrate Joe's experimental VHF & up features
As at ^/branches/wsjtx_exp@5271



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-22 17:48:03 +00:00
Bill Somerville
0b84e97da9 Reduced FFTW patience to 1 for debug builds for fastest startup
Don't make  proper Windows  applications in  debug builds.  This means
that  the  debug output  now  goes  to  the  console and  the  program
(wsjtx.exe) no longer detaches from the console.

If you  require a proper Windows  executable, for instance if  you are
getting  the  debug  output  via  the normal  method  of  attaching  a
debugger,  you can  still do  so  by setting  the CMake  configuration
option WSJT_CREATE_WINMAIN to ON for your debug build configuration on
Windows.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5249 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-20 15:20:38 +00:00
Bill Somerville
af457a096c Send a status update after a replay decodes as UDP messgaes action
This allows any new UDP client to know the WSJT-X status automatically
after  they have  requested  an  initial replay  of  all decodes  upon
discovering a WSJT-X instance.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5245 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-19 22:21:45 +00:00
Bill Somerville
c5c6feb41c Send status information to UDP server
To  facilitate interaction  with other  applications WSJT-X  now sends
status  updates  to  a  predefined   UDP  server  or  multicast  group
address. The  status updates include the  information currently posted
to  the  decodes.txt and  wsjtx_status.txt  files.   An optional  back
communications  channel is  also implemented  allowing the  UDP server
application to control some basic actions in WSJT-X.

A reference implementaion of a typical UDP server written in C++ using
Qt is  provided to demonstrate  these facilities. This  application is
not intended  as a user  tool but  only as an  example of how  a third
party application may interact with WSJT-X.

The  UDP messages  Use QDataStream  based serialization.  Messages are
documented in  NetworkMessage.hpp along with some  helper classes that
simplify the building and decoding of messages.

Two  message  handling  classes   are  introduced,  MessageClient  and
MessageServer.  WSJT-X uses the MessageClient class to manage outgoing
and  incoming  UDP  messages   that  allow  communication  with  other
applications.   The MessageServer  class implements  the kind  of code
that a  potential cooperating  application might use.   Although these
classes  use  Qt serialization  facilities,  the  message formats  are
easily  read and  written  by  applications that  do  not  use the  Qt
framework.

MessageAggregator   is   a   demonstration   application   that   uses
MessageServer and  presents a GUI  that displays messages from  one or
more  WSJT-X instances  and  allows sending  back a  CQ  or QRZ  reply
invocation  by double  clicking  a decode.   This  application is  not
intended as  a user facing tool  but rather as a  demonstration of the
WSJT-X UDP messaging facility. It  also demonstrates being a multicast
UDP server by allowing multiple instances to run concurrently. This is
enabled by using an appropriate  multicast group address as the server
address.  Cooperating   applications  need  not   implement  multicast
techniques but  it is recomended  otherwise only a  single appliaction
can act as a broadcast message (from WSJT-X) recipient.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 16:40:49 +00:00
Bill Somerville
6d65f4b1b6 Remove compiler warning and avoid a potential issue with IB
Subtracting unsigned types  is tricky, made sure result  does not wrap
to avoid potentially implementation defined behaviour.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5211 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-11 15:29:37 +00:00
Bill Somerville
227a7907df Band activity & Rx frequency widget enhancements
Ensure that  these windows have  their viewport scrolled fully  to the
left after deocdes and font changes.

Add the band to the separator line but only if we are certain that the
decodes below it are on that band.

Thanks to  Ton PA0TBR for the  implementation and testing of  the core
features of this change.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5207 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-10 20:25:14 +00:00
Bill Somerville
d80576b1cd Fix font setting
Several issues  mainly related  to the  rather complex  interaction of
style sheets and widget properties with respect to fonts.

Font setting  on the  astro window  should now  be consistent  and not
overridden by application style sheet driven font settings.

Decoded text font setting should now be consistent and not revert back
to Courier 10 on the next decode after a font change.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5179 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-07 12:08:55 +00:00
Bill Somerville
fdc02e34d4 Sort out decoded text font and font changes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5159 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-05 12:22:01 +00:00
Bill Somerville
42a707cc7e Ensure Tx and Rx cursor are initialized from settings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5072 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-18 16:28:49 +00:00
Bill Somerville
40a54f4d21 Ensure main frequency display gets initialized with Rig=None
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-17 17:35:39 +00:00
Bill Somerville
25d18dd545 Refine the special treatment of 73 messages
The  feature to  set the  next message  to be  sent to  auto generated
message number 6 (CQ) is now only trggered when a transmission of a 73
message is made for the first time in a QSO. If a second 73 message is
required, for example when a QSO  partner repeats an RRR message after
your 73 message, simply double  clicking the RRR message will initiate
another 73 message without triggering a  log QSO dialog or setting the
next message to CQ.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5065 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-17 14:59:19 +00:00
Bill Somerville
acf6708718 Don't attempt to lookup empty calls in CALL3.TXT
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-15 13:16:41 +00:00
Bill Somerville
bd0ae24aba Improved automatic message handling
More consistent and accurate processing of compund callsigns including
recognizing the  user's call  in both base  and fully  qualified form,
extracting reports  from special type  one and type two  compound call
messages.  Ensure that  "CQ DX"  message prefixes  are recognized  and
processd correctly.

The  cycle of  double  clicking through  a QSO  has  been enhanced  to
recognoize the  standard messages correctly  and use the  correct next
message. The automatic  transmission button "Enable Tx"  now does what
it says and does not double as a stop transmit button. This allows the
current transmission  to complete  even if the  automatic transmission
feature is  disabled. In line with  this the "stop sending  after a 73
message is sent"  feature turns off the  automatic transmission enable
at the start of the sending of  a 73 message and also the next message
is now set up as the CQ  message automatically in this scenario.  A 73
message is now  either a standard message containing the  word "73" or
any free text  message containing "73" (not necessarily  as a distinct
word").

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-14 19:13:18 +00:00
Bill Somerville
75f3bbe70c QtCreator/QtDesigner don't understand their own classes
Wrapping the  Ui:: UI  class in a  QScopedPointer, a  perfectly proper
thing to do, causes QtDesigner to fail to grok the code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5019 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-08 00:06:43 +00:00
Bill Somerville
50901a5354 Better handling of compound callsigns
Option  to control  standard message  generation for  type 2  compound
callsign holders.

Process decoded  messages based  on either base  or full  callsign for
both DE and DX callsigns.

Change CW id when callsign changed in settings.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5000 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-04 12:22:33 +00:00
Bill Somerville
7fd7b481e6 Add option for returning to last monitored frequency on monitor enable
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-27 18:59:08 +00:00
Bill Somerville
1f3e160a6a Improved next and current Tx message widget short cuts
Short cut  keys implemented via a  special key press event  handler do
not  fully  integrate  with  the UI  and  standard  UI  implementation
guidelines,  also they  introduce an  alternative code  path that  can
diverge from the intended behaviour.

Short  cuts   to  set  the  next   Tx  message  have  been   added  as
Ctrl+<number>.  Alt+<number>  short cuts  now do  as the  help implies
i.e. change  the current Tx message  even if there is  another message
being transmitted.

The log QSO  window should only be  triggered by a 73  Tx message when
transmitting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-27 13:34:18 +00:00
Bill Somerville
fe4d75aa0a Clean up program identification to pskreporter and other places
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4987 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-23 15:19:41 +00:00
Bill Somerville
8736e39643 Abandon getting changeset revision number from svn keyword expansion
Subversion keyword expansion of $Rev:$ in  a file is hopeless as it is
impossible to  coordinate with  a release. Revert  to an  empty string
when it can't be discovered with svn info etc..

Further changes to the way verion and revision numbers are generated

Local builds from  source tar balls or the  two phase wsjtx-superbuild
no longer specify  any revision, just the version  number. Since these
sort  of builds  are  expected  to be  release  candidates or  release
versions the revision (svn changeset  number) is implicit from the svn
tag of the version.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4986 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-22 00:20:42 +00:00
Bill Somerville
ffb61eb28d Look in the right place for temporary files
decoded.txt was not being deleted after a full activity window erase.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4982 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-21 20:13:28 +00:00
Bill Somerville
78c7501680 Add a progress dialog to show that FFT optimization is doing something
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4965 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-15 00:48:38 +00:00
Bill Somerville
adc2bec490 Use the OpenMp parallel decoding jt9 in WSJT-X
The temporary  development version  of jt9 called  jt9_omp is  now the
default jt9. This means that parallel  decoding of JT65 and JT9 is the
default on platforms that support  OpenMP.

If parallel decoding is not required or desired, it can be constrained
by setting the environment  variable OMP_THREAD_LIMIT=1.  In dual mode
operating this will deliver all decodes of the current mode before any
decodes of the  other with the potential impact of  taking up to twice
as long to finish decoding.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4960 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 16:55:47 +00:00
Bill Somerville
3327625346 Bring colour settings into line with general configuration strategy
Colours behave  like other  configuration items  and changes  are only
applied when the Settings UI is dismissed via the "OK" button.

Simplified font settings and use  style sheets consistently to set the
application and decoded  text fonts. This is necessary  because any UI
widget that  has a style  sheet applied does not  honor a font  set by
QWidget::setFont()  even if  there is  no  font setting  in the  style
sheet, this is broken behaviour IMHO  but that is the way Qt currently
works.

Use a  style sheet to style  the frequency display and  clock. This is
necessary to  allow fonts to  be cascaded through parent  style sheets
and still be overridden on these widgets.

Simplify  the decoded  text  widgets,  there is  no  need  to use  the
QTextBrowser  as a  super class  since  the simpler  QTextEdit set  as
read-only is sufficient. Also removed  colour setting via a background
brush  as it  doesn't  work  and the  HTML  'bgcolor' attribute  works
correctly.

Change  to  UI  properties  of  the  decoded  text  widgets  to  allow
horizontal scrolling if required, this  allows larger fonts to be used
without truncating decoded messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 08:53:02 +00:00
Joe Taylor
d91aed5aee Improved, simplified sort routine; faster and better "flatten"
procedure; better window functions for some FFTs, resulting in
better decoder performance; User-selectable colors for backgrounds
of decoded messages.  NB: more testing is desirable!



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4951 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-11 00:50:35 +00:00
Joe Taylor
647f809c97 Made a start at implementing an option to use multi-threaded FFTs.
New command-line option for jt9: [-m nthreads].  Default is nthreads=1.
Also refactored a loop in filbig.f90 that was taking far too much
time.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4916 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-30 21:28:10 +00:00
Bill Somerville
c376ffe7dd The +2kHz check box should not adjust the frequency when starting up
Since the  last monitored dial  frequency is stored and  restored from
the settings the +2kHz setting should  only set the state of the check
box when initializing and not attempt to adjust the dial frequency.

Merged from the wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-22 00:45:11 +00:00
Bill Somerville
f4db871ebd Rig polling not detecting changes against cached values correctly
The  PollingTransceiver class  was not  dealing with  frequency change
commands correctly when the mode was not specified.

Improved some diagnostic messages.

Only leave transmit mode when PTT is seen to drop.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4886 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-08 23:51:56 +00:00
Bill Somerville
f88870df60 Added device error message to file open error messages
Thanks to  Mike W9MDB for contributing  this as a patch.  Also added a
few more in elsewhere.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4883 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-06 19:00:46 +00:00
Bill Somerville
4300b45e6a Set split mode before and after setting Tx frequency
Also cleaned up duplicate trace output.

Using the  DX Lab  Suite Commander  CAT interface  with rigs  like the
TS-2000  requires  that  split  mode  be set  after  changing  the  Tx
frequency. This  is because  setting teh  Tx frequency  disables split
mode.

With some Icom rigs  the rig must be in split  mode before setting the
Tx frequency otherwise the Tx frequency change will not be honoured.

To fix  this the sequence set-split,  set-tx-frequency, set-split must
always be used to change the Tx frequency.

Support for new DX Lab Suite Commander TCP/IP commands

Dave AA6YQ has added two new commands to the Commander server to allow
more reliable control.

Requires DX Lab Suite Commander 11.1.4 or later.

Ensure split Tx frequency agrees with UI before transmitting

Ensure split works on Yaesu via Hamlib without breaking others

Also improved class HamlibTransceiver debug trace messages.

Merged r4776-r4779 from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-06 20:23:29 +00:00
Bill Somerville
935bacd2df Take advantage of the new KVASD v1.12
Pass the  temporary directory to  jt9 and use  it to give  the correct
paths  to  temporary files.  Also  jt9  passes  the absolute  path  to
kvasd.dat in the temporary directory to kvasd.

Clear out all the annoying cruft that has accumulated due to having to
run with $CWD as the temporary directory.

Use QStandardPaths  to find the  writable data directory  where needed
rather than passing it around  between objects. This now works because
the $CWD hasn't been changed.

Do away with the CMake option WSJT_STANDARD_FILE_LOCATIONS as it is no
longer needed.

Fix astro status file azel.dat formatting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-03 00:06:54 +00:00
Bill Somerville
ed6b6143cf Keep UI in line with messages when clicking F4
When tab 2 is  current the action of F4 is to set  the next message to
transmit the standard

Merged  from branch wsjtx-1.4.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4693 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-29 20:35:58 +00:00
Joe Taylor
1e59bdf367 Fix a longstanding bug in "on_addButton_clicked()".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4647 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-25 14:39:15 +00:00
Joe Taylor
c5c873a4a6 Silence compiler warning.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-21 22:10:25 +00:00
Joe Taylor
2f9fde0853 Add wisdom for the FFTs done by symspec_(), wsjtx[.exe].
Also complete the wrapper code in wisdom.c.
TBD: should be possible to use fftw3f.f03 instead of the ad hoc wisdom.c.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4617 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-21 15:17:22 +00:00
Joe Taylor
0070211176 Should have been included in previous commit.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4611 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-20 19:01:52 +00:00
Bill Somerville
20c7046a90 Fix various fake split mode issues
Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4573 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-30 22:03:04 +00:00
Joe Taylor
e4927efd62 Improve the way messages with compound calls are automatically generated.
Routine packmsg now tries the shortlist (Type 1 prefix or suffix) first.
Then it tries to to make a valid message using a Type 2 prefix or suffix.
If both fail, it packs the first 13 characters as a free-text message.

The GUI now generates the most useful messages with compound callsigns
of all valid types.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-19 00:56:41 +00:00
Joe Taylor
f5e4533935 Correct the "Grid" message on Tab 2 for Type 1 compound callsigns.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4486 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-07 17:43:30 +00:00
Joe Taylor
8a4bf4108c Correct the "dB" message on Tab 2 when MyCall is a compound callsign.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-07 16:44:29 +00:00
Bill Somerville
94ab875ea9 Do one automatic retry on CAT errors
To allow for intermittant CAT failures  one retry before bringing up a
message box should allow many setups to be more reliable.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4473 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-04 14:45:09 +00:00
Bill Somerville
e2b39b6b8a Menu action to open the log directory
Since the log files have moved to  a hidden directory a menu action to
open the logs directory in a suitable system applicaiton is needed.

Added "Open log directory" to File manu bar pop up menu.

Merged from wsjtx-1.4 branch.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-04 11:47:03 +00:00
Bill Somerville
4075f5dbb7 Disallow multiple instances without a unique rig name
Because of confilicts using the  shared memory to communicate with jt9
only one instance of WSJT-X may run with each unique key (rig name).

Added a QLockFile for each unique  key in the temp directory and logic
to deal with stale locks and retries.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-03 16:07:43 +00:00
Bill Somerville
38b0d0083a Moving WSJT-X "trunk" on to v1.5.
If built with  qmake the version string will now  be "Not for Release"
since some  many features essential  to making a complete  package are
currently only build when using CMake.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4372 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 19:17:19 +00:00
Bill Somerville
fcc0563391 Get local user manual working on Linux systems.
The  location  of  documentation   files  on  Linux  distributions  is
controlled  to a  certain extent.  Using the  QStandardPaths::locate()
method helps us with this.

Work round the  misbehaviour of QCoreApplication::applicationDirPath()
when  the  CWD has  been  changed  by  working out  the  documentation
location before changing  the CWD to a temporary  directory. This path
is now provided by the Configuration settings class which also manages
other run time paths.

Updated  Debian packaging  to move  a little  nearer a  conforming DEB
file.

Added a basic manpage for rigctld-wsjtx.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4364 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 14:45:36 +00:00
Bill Somerville
87da310279 Removed temporary debugging print.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4363 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 12:53:46 +00:00
Bill Somerville
cb27e2c4b0 Add validation to message entry fields.
All message  entry fields on the  mainscreen and in the  macro editing
facilities are now restricted to valid characters in the JT65/JT9 free
text message alphabet.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4362 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 11:36:01 +00:00
Bill Somerville
fbc744e066 Fix several issues with shortcut keys.
Do not drop  through shortcut key handling so  that spurious responses
are avoided.

The keyPressEvent handlers must call the super class implementation if
the event os not handled.

Correct a typo in the shortcut help display.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 11:35:50 +00:00
Bill Somerville
e64037c61e Fix online manual URL.
Fix manpage destination.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4360 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 00:06:07 +00:00
Bill Somerville
7fad459036 Add local HTML help file to help menu.
So that a manual can be viewed without an Internet connection a second
manual action has been added to  the WSJT_X help menu. This shells out
to the default web browser with a local file target.

The build has been enhanced to install and package the current version
of the  HTML user manual  as downloaded from  the project web  site at
build time

The package  file locations have  been adjusted to be  compatible with
the QStandardPaths  class so that  its locate()  method can be  used to
portably access resources like this local help file

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 23:46:32 +00:00
Bill Somerville
aaae37f6c3 Disallow mode changes from decode dbl-clicks when transmitting.
The message generation code doen't allow  for a mode change on the fly
so this has been disabled.

Also and  decode double click  that would  change a message  or change
mode or  change a frquency  that gets  disallowed is ignored  i.e. the
outgoing message is not changed either.

Remove a  duplicate Tx  message in  decode window that  crept in  in a
prior change.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4353 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:26:03 +00:00
Bill Somerville
758921d65e Ensure Plus 2kHz Check Box is disabled in Transmit when required.
The Plus 2 kHz check box should  not be enabled during transmit if the
"Allow Tx Frequency Changes While Transmitting" is not checked.

Also fixed a  defect that caused the disabled during  Tx state of some
widgets to not clear due to transmit or tune period being shorter than
a poll interval.   Fixed by ensuring PTT changes  are always signalled
rather than waiting for the next poll.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4352 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:55 +00:00
Bill Somerville
9295796134 Do not set split Tx frequency when rig changes frequency.
WSJT-X was attempting to set the split Tx frequency when a dial change
from the rig is detected. Because of the way some rigs and rig servers
report the Tx frequency  while the rig is in Tx  mode this was causing
the rig  to "walk" along the  band. Setting of split  Tx frequency has
been limited to WSJT-X initiated instances only.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4350 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:28 +00:00
Bill Somerville
a576aa3c06 Add facility to disallow CAT commands while transmitting.
Some rigs either do not honour some CAT commands while transmitting or
interpret them  incorrectly. To  deal with this  a settings  option to
allow TX  frequency changes while  transmitting has been added  with a
default value of off.

Any UI actions that directly or indirectly change the TX frequency are
guarded according to this new option. As well as this band changes and
use of  the +2kHz check box  are disabled and guarded  respectively in
transmit mode.

Mode changes via the menu are now disabled while transmitting.

When TX frequency changes are allowed; frequency changes are correctly
implemented while in tune mode.

Double clicking  decodes while  transmitting now  correctly regenerate
and change the message sent on the fly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:19 +00:00
Joe Taylor
ba47458615 Clean up the Tx Watchdog code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4322 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-16 16:53:11 +00:00
Joe Taylor
dcafdb6b99 Look for "txboth" as /tmp/txboth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4271 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-08 14:57:26 +00:00
Bill Somerville
78f398f99c Ensure monitor mode is enabled when tune button clicked.
Monitor mode  was not  being enabled when  clicking the  "Tune" button
which could mean that neither split  mode nor the correct TX frequency
were being set.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-08 10:56:35 +00:00
Bill Somerville
eccd80758a Define WSJT-X manual URL in a single place.
Since the manual URL is used in both the installer and the WSJT-X code
the definition of  the URL (CMake variable  PROJECT_MANUAL) is defined
in  the  CMakeList.txt file  and  propagated  to  the source  via  the
wsjtx_config.h header.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4252 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-05 17:10:01 +00:00
Joe Taylor
4e3afe3a32 Change the URL for User Guide to that for the new v1.4 guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4251 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-05 15:55:49 +00:00
Bill Somerville
d4e69f0b23 Make temp directory unique in test mode.
The Qt  test mode  that uses  special paths  for writeable  files (via
QtStandardPaths)  doesn't make  a special  temporary file  path.  This
change appends " - test_mode" to the WSJT-X unique temporary file path
so that an application run in test mode will not interact with another
running in normal mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4240 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-01 15:55:59 +00:00
Bill Somerville
245a6902c5 Added CMake option to control experimental features.
Sometimes parts of the application are  not fully ready for release at
release  time.   This  option  allows  such  features  to  be  enabled
conditionally at configure time.

The CMake option WSJT_ENABLE_EXPERIMENTAL_FEATURES  is used to control
this ability.  Normally  you will not need to change  it as it behaves
in a reasonable  way.  The option is ON in  debug build configurations
and OFF in non-debug configuratiuons.

The  option  is   made  available  in  all  source   modules  via  the
WSJT_ENABLE_EXPERIMENTAL_FEATURES macro  which is defined to  1 if the
option is ON and to 0 if it is OFF.

Since this  default behavior is  potentially dangerous because  it can
mean that release builds contain different code from debug builds; the
option may  be set to  OFF in debug  configurations in the  normal way
(cmake-gui,  edit  CMakeCache.txt, etc.)   to  achieve  a debug  build
similar to a default release build.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-06-19 16:47:49 +00:00
Bill Somerville
154b64b183 Maintain cursor position during free text edits.
The validation processing of the free text line edit field was causing
the cursor position to be lost.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4148 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-22 11:09:21 +00:00
Bill Somerville
99444bce7c Fix issue with non-modal window lifetimes.
Some non-modal help windows were not being automatically closed on
application exit.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-15 11:41:18 +00:00
Bill Somerville
ea567db752 Make qmake project file more generic.
It is now possible to override the default locations hard coded in
this file with local preferences.

The variables that can be overridden are HAMLIB_DIR and DESTDIR.

To override, add local variable assignments on the intial qmake
command line. E.g.:

qmake HAMLIB_DIR=c:\my\local\hamlib\installation DESTDIR=c:\my\local\install\destination



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-14 19:14:37 +00:00
Joe Taylor
dbf9faaa21 Fix several problems in wsjtx.pro, for qmake builds.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-14 17:43:30 +00:00
Bill Somerville
c1312cab88 Fix qmake build issue where CMake generated macros were erroneously
being used in non-CMake builds.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-14 17:32:31 +00:00
Bill Somerville
b25019ed0a Fix a regression introduced in r3986 - no decode after "Halt TX".
The new suspend/resume approach to  the received audio stream causes a
reset to the input sample buffer  on resume. This is desired behaviour
except when the stream in not actually suspended. The monitor function
was not checking this when resuming monitoring and this caused decodes
for a period to be abandonded simply  by using the "Halt TX" button to
turn off automatic transmission mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-21 14:39:39 +00:00
Bill Somerville
21bf1f1afa Add those pesky MOC generated code includes that break libraries if
they are included by automoc.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4035 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-16 15:15:46 +00:00
Bill Somerville
d2ad4a349f Only calculate revision once.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4024 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-14 10:42:11 +00:00
Bill Somerville
241033d49b Try to form a consistent program title and revision specification from
all types of build.

CMake builds use 'svn info' (the git-svn equivalent is also supported)
to  get the  real latest  revision of  the workspace  that is  used to
source a  build. If the sources  are not in VCS  workspace (build from
source  snapshot  archive for  example)  then  the  $Rev$ svn  keyword
expansion in mainwindow.cpp is used despite its issues with accuracy.

Non-CMake builds use the $Rev$ keyword expansion where possible.

If a CMake  build is from a VCS workspace  with local modifications; a
'-dirty' suffix is added to the revision number to denote that.

If no revision number information can be found the word 'local' is
used as a revision number.

The revision  specification is used in  the WSJT-X "about"  box and is
sent  to PSKReporter.info  as part  of the  local  station information
(this     can     be     viewed     at     the     statistics     page
http://pskreporter.info/cgi-bin/pskstats.pl).

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4017 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-13 17:22:12 +00:00
Bill Somerville
0cd70bb808 Attempt to fix a few TX sequencing issues.
Simplified some of the TX logic and removed some redundant code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4014 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-11 22:50:44 +00:00
Bill Somerville
4c687cd8a6 Simplify MainWindows to Modulator communications.
No longer any need to have a mute mechanism since the TX shutdown
mechanism is sufficient.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4012 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-11 22:50:22 +00:00
Bill Somerville
9433201694 Pass JT9W tone spacing to Modulator via a signal/slot as it is
crossing a thread boundary.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-08 11:56:29 +00:00
Bill Somerville
c3d1eb5cee Replaced Detector monitoring switch with audio stream suspend/resume.
In an effort to reduce the processing overhead when transmitting I
have suspended the audio input stream at source instead of the prior
behavior that simply idled skipping received samples.

This is in response to high activity levels, especially with JTAlert
also running, when decode processing rolls over into the next TX
period.

Tests show a reduction in CPU loading from ~5% to ~1.5% in the above
scenario. Hopefully this will reduce the likelyhood of TX audio
glitches when other system activity spikes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3986 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-07 00:55:05 +00:00
Bill Somerville
f8bdff9aa7 Made the soft keying CW wave shaper a CMake option (off by
default).

Reorganized Modulator interface so that it can control the stream
it writes to.

Make sure only QAudioOutput::stop is called at the end of sending
rather than QAudioOutput::reset which discards pending samples.

Added a quick close option to the Modulator::stop slot to discard
pending buffers if required.

Fix issue in CW synthesizer that was causing CW to be inverted
occasionally.

Made global arrays of symbols volatile because compiler waa
optimizing away reads in sound thread. These global variables
must go eventually as they are a multi-threading hazard.

Simplified TX sequencing to remove some duplicate signals.

Increased range of TX attenuator from 10dB to 30dB. This is mainly for
non-Windows platforms where the attenuator isn't linearized correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3985 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-06 21:58:11 +00:00
Bill Somerville
badcdd563d Save the last used free text message between runs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3982 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 21:55:51 +00:00
Bill Somerville
2c24d9be53 Don't overwrite frequency, station or, macro models whenleaving the
configuration dialog unless they have changed.

Fix a bug I had introduced into the free text message fields so they
don't get overwritten by message generation.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 21:19:04 +00:00
Bill Somerville
da419014e0 Squashed yet more compiler warnings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3979 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 20:06:30 +00:00
Bill Somerville
5eb5735168 Rearranged sequencing of audio streams and devices.
The code  was starting streams linked  to closed devices which  may be
causing issues on  the Mac version.  I have refactored  to ensure that
devices are always opened before related audio streams are started.

Made .h C++ headers emacs friendly.

Removed some code in the MainWindow  contructor that read the log file
but failed to check if the file exists and didn't do anything with the
data anyway.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3977 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 19:29:13 +00:00
Bill Somerville
42844e3104 Uniform appearance of window titles.
Svn revision  number displayed  in about  window and  sent PSKReporter
only.

About box text centred and uses Copyright symbol.

Window   title   on  "Log   QSO"   dialog   includes  rig-name   where
multi-instance support  is enabled. This  is necessary since  the "Log
QSO" dialog is not modal.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3960 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-30 01:31:40 +00:00
Bill Somerville
4537ac471d Reducing the number of files dependent on svnversion.h without
compromising qmake builds. Now it is required to directly include
svnversion.h to get the SVNVERSION macro defined.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3955 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-29 02:51:07 +00:00
Bill Somerville
2997df1f9f Aligned CMake built auto fetch svn revision with old qmake $Id: one.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3950 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-29 00:28:44 +00:00
Bill Somerville
50846fe90a Added support for use of "Standard" locations for writable files.
This allows  writable files  to be  located in  the "correct"
         location for  each platform rather  than in the  directory of
         the  executable  which, in  general,  is  not recommended  or
         allowed in some cases.

         A preprocessor macro  WSJT_STANDARD_FILE_LOCATIONS is used to
         switch be tween old and new functionality, currently it is on
         by default.  It  can be turned off by defining  it to a false
         value (0)  or more simply  with cmake-gui setting  the option
         with  the same  name.  JTAlert  can  only work  with the  old
         non-standard file  locations until  Laurie VK3AMA  chooses to
         support the new file locations.

         Even  if the  above is  not  enabled; the  QSettings file  is
         written to a  user specific location so it will  be shared by
         all instances  of the  program (i.e.  across  upgrades).  See
         below for multiple concurrent instance support changes.

Added a command line parser module for Fortran.

         Added 'lib/options.f90'  to facilitate more  complex argument
         passing to jt9 to cover explicit file locations.

Changed the way multiple concurrent instances are handled.

         This is  to allow the program  to be run multiple  times from
         the same installation directory.

         A new wsjtx command line  optional argument is available "-r"
         or  "--rig"   which  enables  multiple   concurrent  instance
         support.  The  parameter of the  new option is a  unique name
         signifying  a rig  or equivalent.   The name  is used  as the
         shared memory segment key and  in window titles.  The name is
         also used to  access unique settings files  and writable data
         files like ALL.TXT  and log files.  No attempt  has been made
         to share these files between concurrent instances.

         If  "-r" or  "--rig" is  used  without a  parameter it  still
         enables  multiple   concurrent  instance  support   for  that
         instance.  All instances must use  a unique parameter, one of
         which may be empty.

         The        rig       name        is       appended        the
         QCoreApplication::applicationName() for convenient usage like
         window titles.

Set non Qt locale to "C".

         This ensures that C library functions give consistent results
         whatever the  system locale is set  to.  QApplication follows
         the system locale as before.  Thus using QApplication and its
         descendants  like widgets  and QString  for all  user visible
         formating will give correct l10n and using C/C++ library will
         give consistent formatting across locales.

Added top level C++ exception handling to main.cpp.

         Because  the   new  transceiver  framework   uses  exceptions
         internally, the main function now handles any exceptions that
         aren't caught.

Retired devsetup, replaced with Configuration.

         Configuration  is  a  class  that encapsulates  most  of  the
         configuration  behavior.   Because  rig configuration  is  so
         closely coupled with rig operation, Configuration serves as a
         proxy  for   access  to  the  rig   control  functions.   See
         Configuration.hpp  for  more  details  of  the  Configuration
         interface.

Menu changes.

         Various checkable  menu actions moved  from main menu  to the
         Configuration  dialog.   The  whole settings  menu  has  been
         retired with  the single  "Settings..."  action moved  to the
         file  menu  for  consistency  on  Mac  where  it  appears  as
         "Preferences" in line with Mac guidelines.

New data models for data used by the application.

         ADIF amateur band parameters,  free text message macros, spot
         working   frequencies  and,   station  information   (station
         descriptions and transverter offsets per band) each implement
         the  QAbstractItemModel interface  allowing them  to be  used
         directly with  Qt view widgets  (Bands.hpp, FrequencyList.hpp
         and, StationList.hpp).  Configuration  manages maintenance of
         an instance of  all but the former of the  above models.  The
         ADIF band  model is  owned by  Configuration but  requires no
         user maintenance as it is immutable.

Band combo box gets more functionality.

         This  widget is  now an  editable QComboBox  with some  extra
         input capabilities.

         The popup list is still the list of spot working frequencies,
         now  showing the  actual  frequency decorated  with the  band
         name.  This  allows multiple  spot frequencies  on a  band if
         required.

         The  line edit  allows direct  frequency entry  in mega-Hertz
         with  a completer  built  in to  suggest  the available  spot
         working frequencies.   It also  allows band name  entry where
         the  first  available  spot working  frequency  is  selected.
         Recognized band names are those  that are defined by the ADIF
         specification and  can be found  in in the  implementation of
         the ADIF bands model (Bands.cpp).

         If an out of band frequency  is chosen, the line edit shows a
         warning red  background and the  text "OOB".  Out of  band is
         only defined  by the  ADIF band limits  which in  general are
         wider than any entities regulations.

Qt 5.2 now supports default audio i/p and o/p devices.

         These devices are placeholders  for whatever the user defines
         as the  default device.   Because of  this they  need special
         treatment as  the actual device  used is chosen at  open time
         behind the scenes.

Close-down behavior is simplified.

         The close-down  semantics were broken such  that some objects
         were not being shut down cleanly, this required amendments to
         facilitate correct close down of threads.

User font selection added to Configuration UI.

         Buttons to set the application font and the font for the band
         and  Rx frequency  activity widgets  have been  added to  the
         Configuration UI to replace the file based font size control.

Free text macros now selected directly.

         The free text line edit  widgets are now editable combo boxes
         that have  the current free  text macro definitions  as their
         popup  list.   The old  context  menu  to  do this  has  been
         retired.

Astronomical data window dynamically formatted and has font a chooser.

         This window is now autonomous,  has its own font chooser and,
         dynamically resizes to cover the contents.

Double click to Tx enabled now has its own widget in the status bar.

QDir used for portable path and file name handling throughout.

The  "Monitor", "Decode",  "Enable  Tx" and,  "Tune"  buttons are  now
checkable.

         Being checkable allows these  buttons control their own state
         and rendering.

Calls to PSK Reporter interface simplified.

         In   mainwindow.cpp  the   calls   to   this  interface   are
         rationalized to just 3 locations.

Manipulation of ALL.TXT simplified.

         Moved, where possible, to common functions.

Elevated frequency types to be Qt types.

         Frequency  and FrequencyDelta  defined as  Qt types  in their
         meta-type system  (Radio.hpp).  They  are integral  types for
         maximum accuracy.

Re-factored rig control calls in mainwindow.cpp.

         The new  Configuration proxy  access to rig  control required
         many changes  (mostly simplifications) to the  MainWindow rig
         control code.  Some  common code has been  gathered in member
         functions   like   qsy(),   monitor(),   band_changed()   and
         auto_tx_mode().

Rig control enhancements.

         The  rig control  for  clients interface  is  declared as  an
         abstract    interface   (See    Transceiver.hpp).    Concrete
         implementations of this interface are provided for the Hamlib
         rig  control library,  DX Lab  Suite Commander  via a  TCP/IP
         command channel, Ham  Radio Deluxe also via  a TCP/IP command
         channel and, OmniRig via its Windows COM server interface.

         Concrete Transceiver implementations are expected to be moved
         to a separate thread after construction since many operations
         are blocking  and not suitable  for running in a  GUI thread.
         To facilitate this all  instantiation of concrete Transceiver
         instances are handled by  Configuration using a factory class
         (TransceiverFactory)   for   configuration  parameter   based
         instantiation.

         Various   common  functionality   shared  by   different  rig
         interface implementations  are factored out into  helper base
         classes that  implement or delegate parts  of the Transceiver
         interface.  They  are TransceiverBase  which caches  state to
         minimize expensive rig commands, it also maps the Transceiver
         interface  into a  more  convenient  form for  implementation
         (template methods).  PollingTransceiver that provides a state
         polling   mechanism  that   only   reports  actual   changes.
         EmulateSplitTransceiver  that  provides  split  operation  by
         QSYing on PTT state changes.

         EmulateSplitTransceiver can  be used with  any implementation
         as  it follows  the GoF  Decorator pattern  and can  wrap any
         Transceiver implementation.

         OmniRigTransceiver is  derived directly  from TransceiverBase
         since  it doesn't  require  polling due  to its  asynchronous
         nature.  OmniRigTransceiver is only built on Windows as it is
         a COM server client.  To build  it you must first install the
         OmniRig     client     on     the     development     machine
         (http://www.dxatlas.com/omnirig/).

         DXLabSuiteCommanderTransceiver          derives          from
         PollingTransceiver since  it is a  synchronous communications
         channel.   No  third  party  library  is  required  for  this
         interface.

         HRDTransceiver also derives from PollingTransceiver.  The HRD
         interface  library has  been  reverse  engineered to  provide
         functionality with  all available versions of  HRD.  No third
         party libraries are required.

         HamlibTransceiver  likewise  derives from  PollingTransceiver
         since  the Hamlib  asynchronous interface  is non-functional.
         Although this  class will interface with  the release version
         of Hamlib (1.2.15.3);  for correct operation on  most rigs it
         needs to  run with the  latest master branch code  of Hamlib.
         During development many changes to Hamlib have been submitted
         and accepted,  hence this requirement.  Hamlib  source can be
         obtained from git://git.code.sf.net/p/hamlib/code  and at the
         time of writing he master branch was at SHA 6e4432.

         The Hamlib interface directly calls the "C" interface and the
         modified rigclass.{h,cpp} files have been retired.

         There is a rig type selection of "None" which may be used for
         non-CAT  rigs, this  is actually  a connection  to the  dummy
         Hamlib device.

         PollingTransvceiver   derives    from   TransceiverBase   and
         TransceiverBase derives from the Transceiver interface.

         Each interface implementation offers  some possibility of PTT
         control via  a different serial  port than the CAT  port.  We
         also support PTT  control directly via a  second serial port.
         This is done  by delegating to a dummy  Hamlib instance which
         is   only   used   for   PTT  control.    This   means   that
         DXLabSuiteCommanderTransceiver,       HRDTransceiver      and
         OmniRigTransceiver  always  wrap  a  dummy  HamlibTransceiver
         instance.  The  factory class TransceiverFactory  manages all
         these constructional complexities.

         Serial port  selection combo  boxes are  now editable  with a
         manually  entered value  being  saved to  the settings  file.
         This allows  a non-standard  port device  to be  used without
         having to edit the settings file manually.

         For TCP/IP  network CAT  interfaces; the network  address and
         port  may  be specified  allowing  the  target device  to  be
         located on a different machine  from the one running wsjtx if
         required.  The  default used when  the address field  is left
         blank is the correct one for normal usage on the local host.

         Selecting a polling  interval of zero is  no longer possible,
         this  is because  the rig  control capability  can no  longer
         support one way connection.  This  is in line with most other
         CAT control software.

         In the Configuration dialog there are options to select split
         mode  control  by  the  software  and  mode  control  by  the
         software.  For  the former  "None", "Rig"  and "Fake  it" are
         available,  for  the latter  "None",  "USB"  and, "Data"  are
         available.  Because  tone generation is implicitly  linked to
         split mode  operation; it is  no longer possible to  have the
         software in split  mode and the rig not or  vice versa.  This
         may mean some rigs cannot be used in split mode and therefore
         not in dual JT65+JT9 until  issues with CAT control with that
         rig are  resolved.  Single  mode with VOX  keying and  no CAT
         control are still possible so even the most basic transceiver
         setup is supported as before.

         Configuration now  supports a  frequency offset  suitable for
         transverter   operation.     The   station    details   model
         (StationList.hpp) includes  a column  to store an  offset for
         each band if required.

CMake build script improvements.

         The CMakeLists.txt from the  'lib' directory has been retired
         with its  contents merged into the  top level CMakeLists.txt.
         Install  target support  has been  greatly improved  with the
         Release build  configuration now building a  fully standalone
         installation  on Mac  and Windows.   The Debug  configuration
         still   builds   an   installation   that   has   environment
         dependencies for  external libraries, which is  desirable for
         testing and debugging.

         Package target  support is largely complete  for Mac, Windows
         and, Linux, it should be possible to build release installers
         directly from CMake/CPack.

         Cmake FindXXXX.cmake  modules have been added  to improve the
         location of fftw-3 and Hamlib packages.

         Version numbers are now stored in Versions.cmake and work in
         concert with automatic svn revision lookup during build.  The
         version string becomes 'rlocal'± if there are any uncommitted
         changes in the build source tree.

Moved resource like files to Qt resources.

      	 Because location of resource files  (when they cannot go into
      	 the  installation directory  because of  packaging rules)  is
      	 hard to standardize.  I have used the Qt  resource system for
      	 all ancillary data files. Some  like kvasd.dat are dumped out
      	 to the temp (working directory)  because they are accessed by
      	 an external program, others like the audio samples are copied
      	 out so  they appear in  the data directory under  the default
      	 save directory.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
John Nelson
7d704ff37e Remove increase in drop down freq menu: not necessary
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3872 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-15 14:41:35 +00:00
John Nelson
89749f33ff Increase number of items in freq drop-down menu from 10 to 16
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3871 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-15 09:27:29 +00:00
Joe Taylor
18e99529f5 Temporarily(?) comment out the "-subsystem,windows" flag in CMakeLists.txt.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3867 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-12 18:47:28 +00:00
Joe Taylor
7d82a53d92 Update the CMake files and the rev number.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3842 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 20:25:01 +00:00
Joe Taylor
7fe8901149 Merge changes from branches/wsjtx_w back into branches/wsjtx.
Note to developers: Not sure about the makefiles...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3835 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 18:20:40 +00:00
Edson W. R. Pereira
9d3ccab76e Testing commit access
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3832 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 14:19:33 +00:00
Joe Taylor
c2a43a78f6 Reposition several controls on main window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3777 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-02-19 01:32:05 +00:00
Joe Taylor
6a91187d6b Sorry, I committed a corrupt file. OK now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3680 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-31 19:13:14 +00:00
Joe Taylor
d4e454c0ad Implement automatic generation of "Type 1" or "Type 2" messages with
compound callsigns, as required.

TO DO:  Now that the fixed "short list" of common prefixes and suffixes 
is compiled into the code, would be better to remove the requirement for 
file prefixes.txt.  



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3679 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-31 19:01:33 +00:00
Joe Taylor
4d4130827c Working on code that will make "genStdMsgs()" generate the proper
"Type 1" or "Type 2" messages when a compound callsign is present.
This is not yet finished!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3677 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-31 16:45:12 +00:00
Joe Taylor
afde68411b Forgot to put utilities.adoc in SVN. Here it is.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 19:09:14 +00:00
Greg Beam
2815fc1b31 User Guide Updates
* Main Page
- (3.3) Changed OS x DL links to "osx_" vs "osx-" in the ref links.
- Updated main page links. I think we should consider an include::file v.s
- line item listing, as the list is getting kinda long.
- Updated quick-reference guide

* (3.4) Added a section to wsjtx-main.adoc for Linux Compile form Source. This
needs work as I basically pulled the steps from my local build script. While it
works nicely in unattended mode, in an interactive shell, it's not very tidy as
there are too many steps.

* (3.4) Install Package list should be fairly accurate, Ive' tested it on several
new installs, without iussue, once I had the kvasd deps figured out.


 


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 18:40:16 +00:00
Joe Taylor
644b39fad7 Previous commit message should also have mentioned:
5. F7 now toggles the Setup menu item "Double-click on call sets
   Tx Enable".  Present state is written to Status Bar label 3.

The present commit updates the makefiles.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 18:08:40 +00:00
Joe Taylor
4c00ea666a 1. Add "Utility Programs" section to User's Guide.
2. Change "Appendix x" section headings to useful descriptions.
3. Add KB1ZMX and W4TI to the WSJT-X "About" screen and Acknowledgments 
   in the User's Guide.  (Hope I didn't forget anyone -- please advise 
   if I did!)
4. A few more minor tweaks to User's Guide



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 18:03:21 +00:00
Joe Taylor
d274a49b4f Another round of documentation updates.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3669 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-29 20:50:18 +00:00
Joe Taylor
cb88a54c39 1. Updated two screen pix in User's Guide.
2. Revise, revise, revise.  Good writing requires plenty of revisions!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3667 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-28 21:53:09 +00:00
Joe Taylor
2c7a76ffbc Another round of edits for the WSJT-X User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3666 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-28 15:24:26 +00:00
Joe Taylor
a3fa39fa68 Yesterday, forgot to add tx-rx.adoc to SVN. Here it is.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3665 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-28 13:12:19 +00:00
Joe Taylor
ace8f6418e 1. Fix a bug that could cause decoder to hang when presented with
bad data.

2. Fix a bug that could allow a Koetter-Vardy false decode instead of
a valid Berlekamp-Massey decode, sometimes leading to program crash.

3. Many more edits in the User's Guide, *.adoc files.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3664 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-27 21:28:54 +00:00
Bill Somerville
1087e7dbee Bringing CMake scripts up to date.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3663 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-26 10:02:54 +00:00
Joe Taylor
62e67ce491 Forgot to remove some test code from unpackcall.f90.
It's OK now.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3661 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-25 17:07:06 +00:00
Joe Taylor
6541c1da85 Fix a bug that can arise as a result of a false decode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3660 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-25 16:53:34 +00:00
Joe Taylor
2589347c01 Try linking to the new AsciiDoc-based User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3659 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-24 20:43:57 +00:00
Edson W. R. Pereira
dc732b7784 Test revision update
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3654 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-20 19:50:02 +00:00
Joe Taylor
ed91a35847 1. Corrected handling of compound callsigns: use JT65v1 encoding if
applicable, JT65v2 otherwise.  Thanks to DL9RDZ!

2. Fix a bug in flat3.f90, evident on OSX systems.  Thanks to G4KLA!

3. The Makefile now copy the jt9code executable into the destination
   directory for to-be-packaged executables.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3648 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-18 13:59:19 +00:00
Edson W. R. Pereira
6d2daedded Added 3 missing files to lib/CMakeLists.txt
Added code to flush any queued spots to PSKReporter prior to a band change. This should prevent spots being reported on a wrong band.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3647 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-18 12:42:21 +00:00
Joe Taylor
3ded85c5e6 The explicit "connect" to on_cbFlatten_toggled seems not to be needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3644 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-17 15:42:39 +00:00
Joe Taylor
9a1c8e3e63 Correct use of "gain" in symspec.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3643 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-17 14:56:11 +00:00
Joe Taylor
9280eab4c2 IMplement new spectrum flattening.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3642 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-17 14:46:23 +00:00
Joe Taylor
ae88ed065b Fix some illogical use of variable m_RxLog.
Add -DUNIX flag to FFLAGS in Makefile.linux.
Tweak the use of framesAfterDownsample in Detector.cpp.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3631 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-09 18:14:58 +00:00
Joe Taylor
3bb5787225 More tweaks to the use of flat3.
Include updated makefiles.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3626 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-09 00:03:22 +00:00
Joe Taylor
8832044265 Some adjustments to usage of flat3.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3625 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-08 20:55:11 +00:00
Joe Taylor
b4c3fe2368 Flatten waterfall, but not the avg spectrum.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3624 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-08 18:51:37 +00:00
Joe Taylor
e1d0115684 Testing: don't call fil4 if parameters are out of range.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3622 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-07 21:09:58 +00:00
Joe Taylor
e39c3f468b Attempting to trace the occasional crashes seen by a few users.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3620 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-07 17:14:59 +00:00
Edson W. R. Pereira
a3fa7fd539 Forcing version update.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-10-04 20:04:18 +00:00