Joe Taylor
6a1fe0012b
Add wsprlf.f90
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7627 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-04-03 12:11:15 +00:00
Joe Taylor
d788ca7b44
Save files used by fsk4sim.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7626 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-30 20:14:17 +00:00
Joe Taylor
9ebd755c37
Save fsk4sim.f90 with 3 @ 4x4 sync arrays.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7625 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-30 19:24:20 +00:00
Steven Franke
38ab140ab6
Thanks Bill.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7622 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-28 12:16:34 +00:00
Steven Franke
4565b182ff
Add some experimental routines.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7621 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-28 12:05:49 +00:00
Joe Taylor
4f2d3d08d0
Add routines for testing a possible 4-FSK mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7620 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-27 19:59:48 +00:00
Joe Taylor
0673974954
Allow measuring refspec in fast modes. Better display format for phase coeffs.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7612 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-20 19:35:17 +00:00
Steven Franke
827d7173fe
Fix an error in SNR_2500 scaling and add calculation of probability of decode vs number of hard errors.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7610 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-17 18:47:57 +00:00
Steven Franke
2636c849bf
Reset navg after measuring phase response.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7601 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-12 13:02:10 +00:00
Joe Taylor
5ff7b9ac79
Code cleanup following level meter changes. New screen shot for main-left controls.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7597 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-06 15:52:09 +00:00
Joe Taylor
0e87c974e9
Modified behavior of audio level meter and adjacent slider; Tx6 at program startup.
...
1. Level meter range increased to 0-90 dB.
2. Level meter reading is independent of slider setting.
3. For a trial period: thermometer bar goes red if a 16-bit sample
is within 5 dB A/D limit.
4. Slider can be used to adjust levels sent to waterfall.
5. Tx6 message is selected on program startup.
Thanks to W9MDB for most of this code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7596 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-06 14:34:25 +00:00
Joe Taylor
7454f2fadd
Utility program to parse Phil Gladstone's raw-data file from PSKreporter.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7589 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-01 17:40:25 +00:00
Joe Taylor
bdf4ffa7ba
Change several default parameter values used by jt9 when run from the command line.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7581 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-27 20:47:31 +00:00
Steven Franke
fa45380b51
Bring ldpcsim40.f90 up to date and add coherent averaging option to both ldpcsim144 and ldpcsim40. These routines simulate only the performance of the code and the hash/CRC.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7580 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-26 20:14:51 +00:00
Joe Taylor
9a895361cf
Add a utility "allsim" to generate a wave file containing all WSJT-X slow modes as well as an unmodulated carrier and 25 WPM CW signal.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7579 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-24 18:20:56 +00:00
Bill Somerville
2131414791
Add reference spectrum to equalization plots and more plotting enhancements
...
Use a header format for polynomial coefficients that includes the
valid X range in scaled terms and a count of the number of
coefficients.
Use double precision consistently for polynomial coefficients. This
includes formatting with sufficient DPs when writing to files.
Many changes to the equalization plots, more to come.
Add error handling for reading coefficient, plot and filter
files. This includes being backward compatible for old format
refspec.dat files with no header.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7578 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-23 16:21:26 +00:00
Steven Franke
0215ed58c1
Fixes to make Ref Spec work.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7577 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-23 02:18:10 +00:00
Steven Franke
d1ad018b1a
Do polyfit to fil vector in refspectrum.f90 and write the coeffs to the first line of refspec.dat.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7576 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-22 20:43:40 +00:00
Steven Franke
d62dacd7e2
Swap mode symbols for MSK144 so that & is the normal symbol.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7574 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 20:57:49 +00:00
Steven Franke
208e7e2d0b
Simplify equalization logic - still need to fix & vs ^ display.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7573 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 20:13:36 +00:00
Steven Franke
4525981f73
Require an average over at least 5 decoded frames when measuring phase response.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7572 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 17:17:05 +00:00
Bill Somerville
cecc098924
First attempt at a UI phase compensation tool for MSK144
...
This builds on the static phase compensation in the MSK144 decoder and
the phase analysis and polynomial fitting capabilities also in teh
MSK144 decoder, by allowing captured data to be selected for phase
equalization from the WSJT-X UI.
Reads captured phase compensation curve estimate files containing
fitted polynomial coefficients and measured phase data from MSK144
receptions. Intent is to select a compensation curve that is from a
known transmitter like an SDR which have good phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.
Plots of the currently selected polynomial and its modified higher
order terms polynomial which is actually used in equalization (this
plot may be dropped - it is just for kicks at the moment). When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.
Basic maintenance is also included allowing clearing and loading
captured plots and an option to revert to a flat no equalization
curve.
More to come on this as amplitude equalization is also possible, this
will probably be similar, maybe even plotted on the same graph with
dual axes for phase and amplitude. Amplitude correction from a
measured reference spectrum could be viewed and selected for
equalization for all modes. TBC...
This change also introduces the QCustomPlot 3rd party
widget. Currently this is statically linked from a qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring has been completed, which is more in line with the
QCustomPlot author's intentions. This will allow efficient reuse in
other tools shipped with WSJT-X.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 02:13:13 +00:00
Steven Franke
bb2fff65da
Update an ldpc-code simulation tool.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7569 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-20 16:45:35 +00:00
Joe Taylor
3c7e20b05b
Better scheme for displaying QRA65 sync results.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7561 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-10 16:38:19 +00:00
Joe Taylor
f66d142963
Try up to three times to open 'decoded.txt".
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7559 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-07 14:31:11 +00:00
Bill Somerville
cf97a23379
Temporarily disable the Tx/Rx transient suppressor introduced in r7424
...
This code was causing the JT9 decoder to fail to decode, maybe due to
high noise levels and the resulting discontinuity introduced by
zeroing out samples.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7555 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-27 02:22:54 +00:00
Steven Franke
e45f7eaf67
After measuring phase response, write pcoeff file to the data directory.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7551 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-22 03:20:46 +00:00
Joe Taylor
ffb8046c91
When nagain=1 (double-click on waterfall, or click Decode button), act as if "single decode" is selected.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7531 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-18 14:20:28 +00:00
Joe Taylor
602002b489
Correct a typo in User Guide. Re-order items on Tools menu.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7507 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-16 13:38:12 +00:00
Steven Franke
2644efc699
More work on Phase Equalization interface.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7506 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 22:13:59 +00:00
Steven Franke
c3d83a207a
First steps to enable user control of phase calibration.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 21:43:40 +00:00
Steven Franke
1135c33f33
Remove an obsolete file.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7503 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 20:43:11 +00:00
Steven Franke
f0e7bf8033
Only train on DX Call when Rx Equalization is checked.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7502 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 18:39:18 +00:00
Steven Franke
5fb051e3cb
Never apply dynamic phase coeffs. Measure phase response for DX Call and write coeffs, as before. Rx Equalization is still hardwired for K9AN's TS2000.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7501 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 18:25:54 +00:00
Steven Franke
1b1aa99a68
Improve accuracy of frequency estimate for non-fading, phase-stable, high-SNR signals.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7484 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-12 03:48:18 +00:00
Joe Taylor
edef3bc39e
Use a sin^2 window on FFT in freqcal. Fix the table header for fcal.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7472 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-10 14:51:32 +00:00
Bill Somerville
b43567c38c
Deal with the FreqCal edge case of FTol>DF
...
Reduce the tolerance to +-DF in this case to avoid array bounds error.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 22:54:47 +00:00
Joe Taylor
6016f03523
Add the "FMT" tools; remove unnecessary references to calibration station callsigns.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7467 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 15:55:42 +00:00
Steven Franke
59d1ee3d62
Define and init callsign in freqcal.f90. Perhaps it should be removed altogether.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7461 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-07 17:06:13 +00:00
Steven Franke
da6c0c246e
Disallow Sh message decodes with nrxrpt .le. 6.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7460 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 20:53:50 +00:00
Joe Taylor
2698fc02c6
Re Sh and SWL: allow either or neither, but not both.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7459 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 19:01:29 +00:00
Joe Taylor
ab8c93dca9
Fix a problem in msk144spd that caused some flaky behavior.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7458 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 18:28:26 +00:00
Joe Taylor
9866400c1b
Minor code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 22:45:36 +00:00
Joe Taylor
62f5447520
First usable-at-K1JT version of a semi-automated Frequency Calibration routine.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7452 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 20:20:43 +00:00
Joe Taylor
6d64eaa37b
More work on FreqCal mode. Some of this code is temporary!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7451 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 18:35:26 +00:00
Steven Franke
fcaff0b9d1
Tuning NSHMEM - number of Sh/SWL decodes to remember and test against.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7450 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 03:35:33 +00:00
Steven Franke
c47403642e
More progress on SWL mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7449 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 02:26:55 +00:00
Joe Taylor
6d3ca346e0
Further progress toward a usable "FreqCal" (Frequency Calibration) mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7448 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 19:07:35 +00:00
Steven Franke
838555c08c
Tweaks to reject certain types of spurious decodes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7447 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 01:16:19 +00:00
Steven Franke
47f782dbe3
Improve SWL mode performance.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7445 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 20:55:10 +00:00