On the Fortran side:
- For the nzhsym=41 activation, bail out if m_ihsym reaches 45
- For the nzhsym=47 activation, bail out if m_ihsym reaches 48
- Change the format and content of what's written to fort.71
- Change msdelay from 10 to 1
In mainwindow.cpp:
- change format and content of what's written to qDebug
- always start FT8 decoder at m_ihsym = 41, 47, and 50
- don't start function decode() is decoder is already busy
- send updated m_ihsym to jt9[.exe] via ss(1,1). Bill won't like this!
- jt9 bails out of the 41-buffer pass at m_ihsym=45.
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
The current frequency, mode and, call were incorrectly being used to
create a new worked before record from a logged QSO. This meant that
band changes etc. made before clicking "Ok" to log a QSO would be
erroneously attributed to the worked before records.
The Status(1) message acquires the new fields Frequency Tolerance, T/R
Period, and Configuration Name. The Rx DF, Tx DF fields become
unsigned (this should be a benign change which is just for correctness
as -ve values have never been possible).
The Close(6) message becomes bi-directional allowing external
applications to gracefully close down WSJT-X instances.
A new message SwitchConfiguration(14) is provided that allows an
external application to switch the current configuration of a WSJT-X
instance.
Another new message Configure(15) is provided to allow external
applications to adjust some key parameters like the mode and submode.
See the NetworkMessages.hpp header commentary for full details. The
UDPExamples/MessageAggregator reference application has been updated
to be able to exercise all of the above changes.
Note that this commit enforces stricter checking on the
"Settings->Reporting->Allow UDP requests" option, which must be
checked before any state changing incoming messages to a WSJT-X
instance are processed.
This change may break N1MM Logger+ integration, notably the CLASS ADIF
field is populated which may not be recognized by N1MM Logger+, nor
interfaces to it.
One exception to ADIF conformance is that the ARRL_SECT field may be
populated with the value DX despite it not being a valid ARRL_SECT
enumeration value. This is done for consistency with N1MM Logger+ ADIF
exports.
