Commit Graph

260 Commits

Author SHA1 Message Date
Steven Franke
487cebf09c Experimental implementation of AP decoding for JT65 - configured for testing only. Not usable on the air.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8219 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-04 17:03:56 +00:00
Joe Taylor
52b079f870 Fix a typo.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8205 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-11-01 16:41:55 +00:00
Joe Taylor
f01031fed5 Some progress on FoxCalls...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8198 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-30 17:33:25 +00:00
Joe Taylor
3e5f703ed2 Starting to experiment with FoxCalls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8197 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-30 15:18:54 +00:00
Bill Somerville
6424b4986f Improved frequency calibration
Measure check  box added to FreqCal  mode, check to record  to fmt.all
with  current  calibration correction  disabled,  uncheck  to see  the
impact of the current calibration parameters.

The  fmt.all  file  is  now  optionally  renamed  to  fmt.bak  when  a
calibration solution  is accepted.  This allows  users to  preserve an
fmt.all file that they might have edited for best fit.

A calibration procedure might proceed thus:-

1) select FreqCal mode,

2) step through suggested  calibration test frequencies deleting those
that have no usable signal,

3) enable "Menu->Tools->Execute frequency calibration cycle" and check
that suitable signals are present,

4) select a suitable FTol and T/R period,

5) check  "Measure" and let the  cycle complete a few  times to gather
data,

6) uncheck "Measure" to complete the data capture, optionally tidy the
fmt.all file with your favourite editor,

7) push "Menu->Tools->Solve for  calibration parameters" and accept if
you like what you see,

8) sit back and admire your accurately frequency calibrated station.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8167 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-13 22:34:21 +00:00
Joe Taylor
b42d88fe01 Correct a misspelling; add quote marks; push 'About' to bottom of Tools menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8159 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-03 01:23:24 +00:00
Joe Taylor
26b567b4f0 Add more on Copyright protections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8156 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-02 18:27:08 +00:00
Joe Taylor
dc9ab1da32 Update 'blank line' band ID at 4*TRperiod/5.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-01 14:58:10 +00:00
Joe Taylor
34fa909b31 Update mouse_commands.txt and tool tips.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8149 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-01 14:03:16 +00:00
Joe Taylor
d7baae12f8 Another try at optimizing the GUI for simplex and split behavior. Details below:
1. Checkbox "Double-click on call sets Tx and Rx freqs" has been removed
from the Settings -> General tab.

2. Checkbox "Lock Tx Freq" on main window is relabled "Hold Tx Freq".

3. Behavior now defaults to the "simplex" behavior in use up to code
revision r8123.  In particular, double-clicking on decoded mesages
that do not contain your own call moves both Rx and Tx frequencies.
If the first callsign is your own call, only Rx freq moves.

4. If "Hold Tx Freq" is checked, double-clicking on decoded messages
moves the Rx frequency; Tx frequency is moved only if CTRL was held
down.

5. Clicking on the waterfall moves Rx and Tx frequencies as before:
Rx only on a simple click, Tx only on SHIFT-click, and both on
CTRL-click.  This happens even if "Hold Tx Freq" is checked (which
is why this box is no longer labeled "Lock Tx Freq").


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8146 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-30 17:48:46 +00:00
Joe Taylor
04b0563d19 Experimental new behavior for "Lock Tx=Rx" and for clicking on waterfall and decoded text.
1. Checkbox "Lock Tx=Rx" is now labeled "Lock Tx Freq", and its meaning is
quite different.  If checked, the audio Tx frequency cannot be changed.
It's like the "Lock" function on some transceivers.

2. Clicking on the Wide Graph waterfall and on lines of decoded text now
behave as follows:

Click on       Action
---------------------------------------------------------------------
Waterfall:     Click to set Rx frequency
               Shift-click to set Tx frequency
               Ctrl-click to set Rx and Tx frequencies
               If Lock Tx Freq is checked, Tx freq does not move
               Double-click to set Rx frequency and decode there

Decoded Text:  Double-click to copy transmitting callsign to DX Call
               and locator to DX Grid; change Rx frequency to decoded
               signal's frequency; generate standard messages.
               Tx frequency is not changed unless Ctrl is held down
               and Lock Tx Freq not checked.

If this experimental behavior is adopted, some descriptions in the
User Guide and Special Mouse Commands will need to be updated.

3. Starting to implement a new function on the Tools menu,
"Solve for calibration parameters".  This is not yet finished;
DO NOT USE in its present form.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-27 12:39:50 +00:00
Bill Somerville
7173bf5749 Clean up some main window UI layout
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-23 18:09:37 +00:00
Bill Somerville
e1da6f6e16 UI tweaks to improve portability between platforms and font size changes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8102 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-22 12:31:01 +00:00
Joe Taylor
0b7d77589e As an experiment, move "NA VHF Contest Mode" checkbox to main screen and
query operator if d>10000 km.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8100 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-20 19:11:04 +00:00
Bill Somerville
a28143aafb Fix a tool tip typo
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8073 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-08 10:46:25 +00:00
Joe Taylor
8cb7950aa3 Correct another misspelling.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-02 14:22:09 +00:00
Joe Taylor
6c5809876a Fix a misspelled word.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8061 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-01 16:22:19 +00:00
Bill Somerville
bda874be89 Many improvements to decode double click and auoto-sequencing behaviour
Double-clicks on 73 messages fixed.  Fixed issue with incorrect decode
being  selected  by  double-click. Refined  auto-sequencing  sign  off
handling, any 73 or rr73 free text  near Rx or Tx frequency taken as a
73 from QSO  partner but if a  standard message then must  be from QSO
partner.

Moved functionality from MainWindow to DecodedText class.

More  efficient  picking of  messages  from  decoded text  windows  by
extracting the text block directly.

Tighten up  use of RR73 and  skipping Tx1, these are  now disabled for
relevant compound calls where they would break the QSO exchange.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-09-01 05:11:57 +00:00
Joe Taylor
79e63d782d Remove the "Weak" checkbox from GUI, it's not implemented.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-03 14:48:59 +00:00
Joe Taylor
e0b507d6e6 Fix the "F4" shortcut description; add usage advuice to "Lock Tx=Rx" tool tip.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7976 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-01 19:32:54 +00:00
Bill Somerville
d7f8c91bf4 Add menu option to turn on AP decoding in FT8 mode
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7954 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 10:56:12 +00:00
Bill Somerville
54ec5b8413 Better behavior and tool tips for Txn buttons and radio buttons
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7952 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 01:39:23 +00:00
Bill Somerville
5864c04d26 Option to use RR73 grid message as RRR message substitutes
Enable or  disable by double-clicking  the Tx4 button or  the adjacent
radio button. Is auto disabled by a band change as it is expected that
the user  reassess the  conditions to see  if message  repetitions are
unlikely to be needed.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7950 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 01:39:04 +00:00
Bill Somerville
3cefca20b6 Option to skip using grid reply message
Enable and disable  by double-clicking the Tx1 button  or the adjacent
radio button.  Tx1 message shows  grayed out  when the Tx1  message is
elided.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7949 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 01:38:57 +00:00
Bill Somerville
87ae336443 Add the option to ALT+click a decoded CQ or QRZ message which only
moves the Rx  frequency to theirs, this facilitates  calling a station
who is busy and may have  many callers on their frequency. Updated the
corresponding mouse shortcuts help text.

Allow for times with seconds when parsing fast mode and FT8 decodes.

Exclude the RR73 grid square from  and grid validation or matching, it
is not a grid square any more as  far as WSJT-X is concerned, it is an
RRR substitute.

Add a  simple state  machine for  QSO progress  such that  replies and
auto-sequencing can be better controlled.

Get compound callsign edge cases working again and allow QSOs from and
to compound callsign holders working in as many situations as possible
including  auto-sequencing and  FT8 auto-reply  mode.  This  does mean
that a  "DE W6/K1ABC DM93"  type message close to  a callers Tx  or Rx
frequency will be taken  as a reply to a CQ call  despite it not being
explicitly addressed back to the  CQ caller. Compound callsigns should
work in MSK144 contest  mode also as well as in  short code modes with
some  minor  restrictions   (short  codes  will  not   be  used  where
configuration demands that  a message be used to send  a full compound
callsign).

Auto sequencing  has been made  generic such that  it can be  used for
more than one mode if desired.

Allow the use of free text messages to sign off in auto sequenced QSOs
without the message  being overwritten by the  sequencer. Double click
actions have  been added to the  Tx5 radio and push  buttons to revert
back to the default standard 73 message.

Make DisplayText  class interface  more idiomatic  C++ and  simplify a
bit.

Fixed  some  displayed widget  arrangements  for  different modes  and
sub-modes  so that  they  are  consistent when  starting  up and  when
switching mode or sub-mode.

This is  a big change which  has been extensively tested  but no doubt
there will also be some new defects introduced.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-24 19:27:23 +00:00
Joe Taylor
ee38f44656 Remove slider next to audio level meter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7927 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-19 23:23:20 +00:00
Bill Somerville
b939ff33e3 Refactor phase equalization dialog names
Now  equlization  tools   as  it  covers  both   amplitude  and  phase
equalization.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7875 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 15:33:17 +00:00
Joe Taylor
16a6a0df97 Remove "WSPR-LF" from Mode menu. Another try at getting the "Call First" logic right.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7834 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-10 13:20:33 +00:00
Joe Taylor
b27c269647 Add 'Call First' and 'Weak' checkboxes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7824 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-09 19:25:28 +00:00
Joe Taylor
2dea222233 Default CQ nnn freq should be 260.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7821 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-09 14:16:09 +00:00
Joe Taylor
a65061cdde Correct the save/restore behavior of hiding menus and controls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-04 14:39:07 +00:00
Joe Taylor
42ec06c9e1 Add checkBoxes to (potentially) replace the CTRL+M commands for minimizing window sizes. Suggestions for better positioning, etc, are welcome.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7769 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 19:05:52 +00:00
Joe Taylor
d94effcf41 Make FT8 available to all users, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 15:16:02 +00:00
Joe Taylor
bb21ca949c Starting to insert FT8 into GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7726 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 13:48:45 +00:00
Bill Somerville
0af9d06351 Remove unnecessary window size contraints that Designer insists on adding
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7703 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-04 22:51:34 +00:00
Bill Somerville
e6150df623 Proper custom spin boxes for frequency tolerance and T/R period
These were using a hijacked custom spin box that was designed only for
letters i.e. submodes. Now there are two new custom spin boxes.

HistedSpinBox:- can  be set with  a list  of integer values  which the
step  up and  down  will  follow. Optionally  limits  the maximum  and
minimum value  to the upper and  lower bounds of the  values set. Note
that intermediate values are still valid.

RestrictedSpinBox:- more like a combo  box because the provided values
are the only ones that can be set.

HintedSpinBox   is    used   for    the   frequency    tolerance   and
RestrictedSpinBox is used for T/R period.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7698 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-27 20:04:44 +00:00
Bill Somerville
503e8bca2d Fix "CQ NNN ..." with Tab 2 message scheme
More  to come  on this  but should  get Tab  2 basically  working with
MSK144 running from a calling frequency.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 20:46:19 +00:00
Joe Taylor
0f3b83633e Minor tweaks to GUI for WSPR-LF.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 19:40:54 +00:00
Joe Taylor
b256185ed1 Starting to implement experimental mode "WSPR-LF". Beware possible undesired side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7658 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-04-28 16:49:09 +00:00
Bill Somerville
7fdad7b78b Bring meter tool tip into line with functionality
Thanks to Mike, W9MDB, for this contribution.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7653 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-04-26 18:36:39 +00:00
Bill Somerville
8686876498 Do not use menu shortcut that hides shortcut key used in widgets
Ctrl+M (Cmd+M)  was being  used as  a menu shortcut  and in  key press
event  handlers   which  leads  to  inconsistent   behaviour  on  some
platforms. Removed menu action shortcut.

Also tidied up handling of the  hide controls menu action by making it
a checkable  action and using its  checked state to store  the control
hiding state.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7608 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-15 18:25:21 +00:00
Bill Somerville
912e6149d1 Remove unnecessary geometry properties from main & configuration wondows
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7605 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-14 14:23:27 +00:00
Joe Taylor
0e87c974e9 Modified behavior of audio level meter and adjacent slider; Tx6 at program startup.
1. Level meter range increased to 0-90 dB.
2. Level meter reading is independent of slider setting.
3. For a trial period: thermometer bar goes red if a 16-bit sample
   is within 5 dB A/D limit.
4. Slider can be used to adjust levels sent to waterfall.
5. Tx6 message is selected on program startup.
Thanks to W9MDB for most of this code.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7596 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-06 14:34:25 +00:00
Bill Somerville
cecc098924 First attempt at a UI phase compensation tool for MSK144
This builds on the static phase compensation in the MSK144 decoder and
the phase  analysis and  polynomial fitting  capabilities also  in teh
MSK144 decoder,  by allowing  captured data to  be selected  for phase
equalization from the WSJT-X UI.

Reads  captured phase  compensation  curve  estimate files  containing
fitted  polynomial coefficients  and measured  phase data  from MSK144
receptions. Intent  is to select a  compensation curve that is  from a
known transmitter like  an SDR which have good  phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A  suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.

Plots of  the currently  selected polynomial  and its  modified higher
order terms  polynomial which is  actually used in  equalization (this
plot may  be dropped - it  is just for  kicks at the moment).   When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.

Basic  maintenance  is also  included  allowing  clearing and  loading
captured  plots and  an option  to revert  to a  flat no  equalization
curve.

More to come on this as  amplitude equalization is also possible, this
will probably  be similar, maybe even  plotted on the same  graph with
dual  axes  for phase  and  amplitude.   Amplitude correction  from  a
measured  reference   spectrum  could  be  viewed   and  selected  for
equalization for all modes. TBC...

This   change    also   introduces    the   QCustomPlot    3rd   party
widget. Currently this  is statically linked from a  qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring  has been  completed,  which  is more  in  line with  the
QCustomPlot author's  intentions. This  will allow efficient  reuse in
other tools shipped with WSJT-X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 02:13:13 +00:00
Steven Franke
1f65b19bf1 Add tooltip message for SWL box.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7558 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-06 23:38:32 +00:00
Bill Somerville
ca796744a3 Remove unnecesary main window size defaults
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7529 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-18 13:44:24 +00:00
Joe Taylor
602002b489 Correct a typo in User Guide. Re-order items on Tools menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7507 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-16 13:38:12 +00:00
Steven Franke
c3d83a207a First steps to enable user control of phase calibration.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 21:43:40 +00:00
Joe Taylor
247aa1a2ee Several changes to operational logic for FreqCal mode.
1. Menu item *Tools -> Execute frequency calibration cycle* is renamed and checkable.  Cycling does not start until checked.
2. Ctrl+F10 now allows you to cycle manually through the list of calibration frequencies.
3. Calibration sequence lengths can be set to 5, 10, 15, or 30 s with the sbTR spinBox.

Also: don't set sbTR index to 0 when entering a slow mode.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-12 18:21:58 +00:00
Joe Taylor
2698fc02c6 Re Sh and SWL: allow either or neither, but not both.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7459 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 19:01:29 +00:00