Commit Graph

95 Commits

Author SHA1 Message Date
Joe Taylor
73612cf6a5 Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:37:00 +00:00
Joe Taylor
d3182f4161 Remove the "Robust sync" option.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 17:26:05 +00:00
Joe Taylor
ec281f93c4 Add a user control for Tx Delay, on the Advanced tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 23:18:48 +00:00
Bill Somerville
424ed88645 Take advantage of the forthcommng DX Lab Commander enhancement
V12.2.6 of  teh DX Lab Suite  Commander finally has a  way to suppress
mode rationalization  when setting  the split  Tx frequency.  This now
means that we  can now honor the  radio setting to not  change the rig
modulation mode. This  should help with a number of  rigs that require
different modes  on teh Tx and  Rx VFOs for optimal  wide band digital
operation.  This   will  also  help   with  some  rig   and  interface
combinations that lock  up or otherwise misbehave when  setting the Tx
VFO mode at certain times with respect to other rig control commands.

This change also improves mode  setting in general hopefully closing a
few corner case issues when starting  up and when transmitting for the
first time in a session.

Included  is  the  latest  DX  Lab  Suite  Commander  TCP/IP  commands
documentation correct for v12.2.6.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7030 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-13 23:33:54 +00:00
Joe Taylor
289ba66119 1. Fix cause of "frozen UTC" bug in MSK144 mode. (Could there be more than one cause?)
2. Fix failure to remember Ftol setting in MSK144 mode.
3. Remove obsolete controls from Advanced tab.
4. Add control for "x 2 Tone spacing" on Advanced tab.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-01 19:46:19 +00:00
Bill Somerville
c586204d75 Add proper Qt validation for callsigns and grids
Two      new     validator      classes     CallsignValidator      and
MaidenheadLocatorValidator   are   introduced    and   used   in   the
Configuration and MainWindow implementations.

MaidenheadLocatorValidator  supports  different  lengths  and  minimum
required  lengths  with  a  default of  subsquare  with  square  being
required.

The  message_aggregator  application has  been  enhanced  to show  the
current DX call and DX grid as shown in the WSJT-X main window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-10 22:20:30 +00:00
Bill Somerville
3f1ea9d10c Make message boxes more platform independent with a wrapper
Instead  of  using the  Qt  QMessageBox  class  directly a  new  class
MessageBox  (MessageBox.hpp)  has been  added  to  deal with  platform
independence issues like the title not being shown on Mac OS X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-03 20:31:19 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 11:36:59 +00:00
Bill Somerville
a3ab57bea7 Ensure rig calibration parameter changes are used immediately
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-19 17:36:15 +00:00
Bill Somerville
8e43af11e5 Fix numerous memory leaks and uses of uninitialized variables
These were discovered when running under teh valgrind MemCheck tool. I
have also  checked in a suppressions  file (wsjtx-valgrind.linux.supp)
suitable for use on Linux when running the valgrind MemCheck tool.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-10 15:54:16 +00:00
Bill Somerville
2bb851d164 Correct defect in configuration rig invariant enforcement
The port  type (serial, network, usb,  none) was not tracking  the rig
type.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6703 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-25 23:06:04 +00:00
Bill Somerville
d8350bd35e Fix re-initialization issue in Configuration
Do not use a static scope  variable where a class instance variable is
needed.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6660 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-30 23:24:19 +00:00
Bill Somerville
d9e4d5f25f Improve font handling when resetting configurations and when restarting
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6649 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-26 20:06:36 +00:00
Bill Somerville
1cae0b8aa9 Move temporary directory creation and deletion outside of MainWindow
Changing configuration causes  WSJT-X and JTAlert to get  into a fight
for the temporary directory. By moving the creation and clearup of the
temporary directory outside  of the configurations loop  this issue is
minimized to no worse than before multiple configurations were added.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 21:59:22 +00:00
Bill Somerville
e6c59a42b5 Ensure that WSPR band hopping is disabled when Rig is None
Also added  a new configuration query  method to check if  Rig is None
i.e. a dummy rig.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6629 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 20:22:23 +00:00
Bill Somerville
3b46e140af Disable Internet spotting when rig control is not working
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6628 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 19:33:33 +00:00
Bill Somerville
f7b02f8296 Ensure that rig control split and mode are only changed when allowed
Only when split  operating is not none should split  be touched on the
rig, likewise only  when Settings->Radio->Mode is not  none should the
rig mode be touched.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6597 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-07 18:39:46 +00:00
Bill Somerville
2cfbb15b4f Rig control overhaul to implement generic Doppler shift tracking
The  concept of  a nominal  receive  and transmit  frequency has  been
introduced. This is  used as a base frequency  for Doppler correction,
frequency setting  and reporting. The  start up frequency is  now zero
which is  updated by the first  rig control status report.  This needs
more  work to  accommodate  calling frequency  plus working  frequency
operation as is used for random MS operation etc..

The  main  window  frequency  display  now  shows  the  transmit  dial
frequency while transmitting.

The mode changing logic sequence has been changed such that the rig is
correctly put  into and  taken out  of split mode  as required  by the
target mode.  This also  avoids the "other"  VFO having  its frequency
changed when  entering a mode that  does not use split  operating like
WSPR.

The main window  band combo box edit  may now be used to  input an kHz
offset  from the  current MHz  dial  frequency. This  is intended  for
setting  a sked  or working  frequency on  the VHF  and up  bands. For
example the working frequency for 23cms  might be set to 1296MHz and a
working  frequency of  1296.3MHz would  be selected  by selecting  the
23cms band  with the combo box  drop down list and  then entering 300k
into the band combo box edit widget.

When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such  that the frequency  clicked on  becomes the Tx  and Rx
frequency using  the fixed 1000Hz  DF that  JT4 modes use.   This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF  for both Tx and Rx and therefore
one  can "net"  to an  off frequency,  but visible  on the  waterfall,
caller with one click.

Improvements to OmniRig  rig control including use of  the serial port
control lines RTS or DTR, on the  CAT serial port used by OmniRig, for
PTT control.

Incrementing transaction sequence numbers added to messages to and from
the rig control  thread. This enables round trip status  to be tracked
and associated with a request. For  example a command that might cause
several  asynchronous  status  updates  can  now  be  tracked  in  the
originating thread such  that it is clear which updates  are caused by
executing the  request. This in turn  allows updates to be  held until
the request is complete i.e. the  state is consistent with the results
of the request.

Messages  to the  rig control  thread are  now posted  as a  new state
(Transceiver::TransceiverState) object. The  rig control thread tracks
requests and  actions any differences  between the prior  requests and
the new state.

The rig  control thread is now  stored on the  heap so that it  can be
closed down  and released as needed.  Along with this the  rig control
close  down  semantics  are  better defined  avoiding  some  potential
deadlock situations.

If the rig  is placed into split  mode it will be  reverted to simplex
mode when the rig connection is closed.

When  using direct  rig control  via Hamlib,  rigs that  have A/B  VFO
arrangements and  no method to query  the current VFO like  many Icoms
and  the Yaesu  FT-817/857/897(D)  series now  have smarted  frequency
updating requiring no  VFO changes when changing  the frequency.  This
is particularly  important when doing  Tx Doppler correction  to avoid
glitches.

The implementation  of emulated  split operating  mode ("Fake  It") is
simplified and improved.

A dummy  Hamlib transceiver for PTT  control on a separate  port is no
long instantiated if CAT or VOX PTT control is selected.

The resolution and  any rounding of the rig CAT  frequency set and get
commands is determined automatically  upon opening the rig connection.
This is needed to determine the  rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.

Frequency  calibration is  calculated separately  for the  receive and
transmit frequencies.

Whether  the  rig  modulation  mode  should be  controlled  is  now  a
constructor  argument rather  than  being passed  with individual  rig
control requests.

Doppler  shift  correction  is   considerably  enhanced  with  simpler
controls and much  better rig control.  A new mode  of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via  CAT  when transmitting.   Such  rigs  have a  Doppler  correction
calculated  for the  middle of  the next  transmit period  just before
transmission starts. While  using Doppler tracking it  is now possible
to adjust the  sked frequency either using the new  kHz offset feature
of the main  window band combo box  or by directly tuning  the rig VFO
knob while holding down the CTRL key.

The astronomical data window that includes Doppler tracking control is
now opened  and closed using a  checkable menu item to  avoid it being
accidentally closed.

Debug  configuration  rig  control  diagnostic  messages  now  have  a
facility argument for clearer and more standardized trace messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
Bill Somerville
d864e7f4cb Allow split operating for "None" rig, use for testing only not for release
Setting  the  CMake  option WSJT_RIG_NONE_CAN_SPLIT=ON  will  buold  a
version taht allows split operating with  the dummy rig. This must not
be shipped since it will generate incorrect Tx tones.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6589 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:49 +00:00
Bill Somerville
d63230729b Fix some logic errors in CAT serial port control line settings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:41 +00:00
Joe Taylor
c35c80a4ac Make "group_box6" invisible, for now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6553 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-23 15:48:44 +00:00
Joe Taylor
dfb8dc7422 Add a "Single decode" checkbox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6516 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 15:13:06 +00:00
Joe Taylor
a0318d3a0a Calibration of the "Degrade S/N of .wav file" requires knowledge of receiver bandwidth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-23 19:37:38 +00:00
Joe Taylor
333f8519d3 Attempting to make WSJT-X display messages like "<K1ABC W9XYZ> R26".
[For now, I'll make do with () in place of <>.]


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6418 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-21 21:12:12 +00:00
Bill Somerville
cf5f3916c7 Add facility to reset split mode when closing a rig connection
This option defaults to on but may be unchecked in settings.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-06 17:24:17 +00:00
Bill Somerville
9fc5568e32 Ensure that the temporary directory is usable
Cooperating applications that use file watchers can inadvertently lock
the  temporary  directory which  defers  deletion  of it  when  WSJT-X
exits.  This  is OK  until  WSJT-X  is  restarted  when it  finds  the
directory but  it is  locked for  all access  by the  operating system
since it  is pending deletion.  There is no  way around this  short of
closing the offending application so a message to that effect is given
with a retry option.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6347 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-05 16:43:41 +00:00
Bill Somerville
7cf8e82faf Handle disappearing displays correctly
Qt  makes sure  a widget's  window is  displayed on  a display  if the
display configuration  changes while  it is  running.  If  the display
configuration changes while  the application is not  running then only
QWidget::saveGeometry()  and  QWidget::restoreGeometry()  will  ensure
that  the  widget's window  is  correctly  displayed if  the  original
display is no longer present.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6257 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-10 14:15:43 +00:00
Bill Somerville
9a8560cd84 Initialize degrade saved SNR setting to zero
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6169 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-24 00:11:39 +00:00
Joe Taylor
475118428e Add facility to degrade S/N of data from .wav files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 18:05:36 +00:00
Joe Taylor
c91d47d602 Fix misspelling of new settings name "Sync1Bit".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6163 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 14:56:00 +00:00
Steven Franke
befb687ca2 Default is Robust sync OFF
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6154 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 18:03:48 +00:00
Steven Franke
c9ad0c3038 Add robust sync checkbox to Advanced setup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6151 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 15:27:14 +00:00
Bill Somerville
19779fa002 Add support for Hamlib USB rig types
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6144 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-21 20:23:30 +00:00
Bill Somerville
1a23757b26 Reintegrate merge from wsjtx_exp branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-18 01:28:12 +00:00
Joe Taylor
a7e2168532 Remove code associated with the unimplemented JT9W mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6061 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-09 17:19:48 +00:00
Bill Somerville
1f26660585 Ensure that v1.6 or later doesn't trash v1.5 settings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-10-21 20:05:02 +00:00
Bill Somerville
f4fdc0c492 Resolve a long standing rig control corner case
This change allows serial control lines  to be forced high or low (DTR
or RTS)  while using the  other (RTS, DTR) for  PTT on the  CAT serial
port. It  is only needed  for some very  obscure and rare  serial line
powered interfaces.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5869 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-09-09 12:16:22 +00:00
Bill Somerville
7ec4d1a109 Qt 5.5 compliance
The  header QMetaType  must now  be  included explicitly  if no  other
header includes QObject.

Adjust band  combo box  layout settings  to ensure  it is  rendered at
minimum content size otherwise it  stretches the signal meter width to
an ugly extent.

Also retired the "frequencies" settings  file key so that upgrades and
downgrades  between  1.5 and  1.6  no  longer require  rebuilding  the
working frequencies list.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-27 18:11:06 +00:00
Bill Somerville
b8e67a5809 Allow DTR line to be forced alongside hardware flow control
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5671 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:32:57 +00:00
Bill Somerville
3dd824ad6b Make the main window more portable and font change capable
The Rx meter  is now a better  Qt citizen and can be  resized. Added a
more obvious peak signal indicator. It  is now a custom widget derived
from QFrame and is now directly added via promotion in Designer.

Added a custom  widget to act as  a letter spin box, this  is used for
sub mode control.  Switched the frequency tolerance widget  to a combo
box with preset  values so that it is more  uniform across systems and
font sizes.

Added container widgets  for group control of various  UI widgets such
as  QSO controls,  DX call  controls and  WSPR controls.  Introduced a
stacked widget to allow the WSPR controls to be swapped in in place of
the "QSO" controls. The "QSO" controls  are are the Rx, Tx and related
controls along with  the main tab widget with the  message buttons and
fields. This means  that the WSPR version of the  main window (and EME
Echo mode) are now much cleaner.

Increased the  size of the  rig control  widget and styled  its colour
using a dynamic property so that it  can be defined in the Designer UI
definition. Reinstated it  as a push button to do  a rig control reset
and retry after an error.

Reset most UI widgets to default properties, particularly removing any
fixed sizes so that they can resize freely when fonts are changed. The
overall layout is now controlled almost exclusively by stretch factors
on some of the rows and columns of the various grid layout managers.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-25 22:41:13 +00:00
Joe Taylor
d69d3b4ca0 User-configurable directory for file azel.dat.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5566 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 17:39:59 +00:00
Bill Somerville
aad2ec6950 Only show WSPR transmitting message when configured to show Tx messages
Also changed  the default for the  "Tx messages to Rx  window" setting
true.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5521 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 11:32:25 +00:00
Bill Somerville
f3930eb5c8 Polish the UI for WSPR and WSPR band hopping
Provide  a  dialog for  band  hopping  scheduling which  replaces  tab
four. Ensure that split mode is  not used for WSPR. Select the correct
tab  for WSPR  operation.  Shift WSPR  band hopping  code  out of  the
MainWindow class.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 01:45:40 +00:00
Bill Somerville
abfcf1cb5b New static data location for read-only data files
Access in CMake via ${WSJT_SHARE_DESTINATION}/${WSJT_DATA_DESTINATION}

Access in wsjtx.exe using Configuration::data_dir()

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5487 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-01 21:47:55 +00:00
Bill Somerville
0d4fd2e018 Fix regression in applying transverter offset
Somehow I  had decided that  the offset  could be determined  from the
frequency coming  from the rig,  this is  of course impossible  so the
code now reverts to saving the  offset used for the last frequency set
and sticks with it until another frequency is set.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-01 19:31:40 +00:00
Bill Somerville
fd06da1432 Improvements to models and delegates
Trying to  find the  sweet spot  for completeness,  usefulness, safety
and,  performance  from  the  various  custom  item  models  and  item
delegates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5474 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 11:51:31 +00:00
Bill Somerville
f200506571 Add mode dependent working frequencies
Working frequencies are mode dependent  and a reset to defaults button
has been added.

Also re-factored much of the model  and item delegate code to simplify
several  of the  model  implementations. Introduced  a single  routine
called from main to register the custom types with Qt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 23:22:17 +00:00
Bill Somerville
34f8924cfc Reintegrate the wsjtx_exp branch into the trunk
This  merge brings  the WSPR  feature development  into the  main line
ready for release in a future v1.6 release.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-27 13:08:28 +00:00
Bill Somerville
0504d2af92 Rig frequency calibration
The   settings   are  a   linear   calibration   correction  for   the
rig. Calibration constants are supplied as an intercept error in Hertz
and a slope error in parts per million.

The correction is  applied only to the final frequencies  going to and
from  the radio.   This means  that  any transverter  offsets are  not
corrected. This is  appropriate as each transverter will  have its own
error factors.  Transvertor and  other individual band specific errors
can only be corrected by adjusting the offset for the band.

Thanks  to Mike  W9MDB for  an  initial implementation  of Joe  K1JT's
suggestion. See also the WSPR documentation for details of calculating
the required calibration constants.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5396 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-19 17:52:47 +00:00
Bill Somerville
2f8b3abb81 Avoid using hostname localhost as some systems don't resolve it
Windows systems  sometimes don't have  localhost defined in  the hosts
file so use the IP address 127.0.0.1 instead.

Merged from the wsjtx-1.5 branch



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5326 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-29 21:58:46 +00:00