Commit Graph

999 Commits

Author SHA1 Message Date
Joe Taylor
73612cf6a5 Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:37:00 +00:00
Joe Taylor
05c19aecd2 Fix a bug intruduced in r7060 that prevented reading .wav files in fast modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7069 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 17:46:09 +00:00
Joe Taylor
2d9b729c6c Don't show the Auto Seq checkbox when it's not relevant.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7062 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 12:54:09 +00:00
Joe Taylor
1ecc3d7c01 Correct the m_hsymStop values for slow modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7060 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 19:00:55 +00:00
Joe Taylor
d3182f4161 Remove the "Robust sync" option.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 17:26:05 +00:00
Joe Taylor
ec281f93c4 Add a user control for Tx Delay, on the Advanced tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 23:18:48 +00:00
Joe Taylor
cbc4ef1b49 Change cbEME to cbAutoSeq (always). Protect against frequency jump in MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 15:36:17 +00:00
Joe Taylor
d99770d664 RO, RRR, 73 short messages apply only to JT65.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 14:01:28 +00:00
Joe Taylor
255b712602 Make Sh box visible and used in JT65 VHF-enabled mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 13:06:01 +00:00
Joe Taylor
1066dc2508 Don't allow naggressive > 0 unless VHF Features and Single Decode are both checked.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7054 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-05 17:33:07 +00:00
Bill Somerville
bdc8dd881c Now 6 digit locators are possible again add option to prefer type 1 WSPR messages
This  option, on  by  default, maintains  backwards compatibility  for
non-compound  callsign  holders.   If   switched  off  and  they  have
specified a 6 digit  grid then it will be sent in  the type 2 protocol
using two messages and a hashed callsign.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7053 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-03 23:33:13 +00:00
Steven Franke
ca19e977c0 Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7051 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-01 21:50:52 +00:00
Bill Somerville
d58a7e0311 Fix an issue with 6 character grids not being used in WSPR
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7042 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:02:01 +00:00
Bill Somerville
d2a191aca0 Clear the DX grid if the base call of the DX call changes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7040 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:46 +00:00
Bill Somerville
81ad76cacc Produce a warning message if the WSPR .c2 file cannot be written
Thanks to Mike W9MDB for this patch.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7039 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:38 +00:00
Bill Somerville
7350eb0892 Strip decode quality information from decoded messages before parsing by double click
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7037 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:22 +00:00
Joe Taylor
c8e340cf88 1. Correct the max length of MSK144 decoded text strings. Thanks Mike!.
2. Suppress rare QRA64 garbage decodes that contain "000AAA".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7033 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-16 19:17:45 +00:00
Bill Somerville
cc178ab6fa Create the splash screen before assigning the application name
Even  though the  splash screen  does  not have  a title  it seems  to
interfere  with JTAlert  which  enumerates window  titles to  identify
WSJT-X instances. I'm not sure why  this is necessary, but if it helps
it should be benign.

Ensure that the  splash screen is hidden before any  message boxes are
shown, this is essential  at startup if there is a  stale lock file or
rig control error.

Be far less aggressive about bringing  the splash screen to the top of
the application window  stack. This may cause the splash  screen to be
obscured on some platforms.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7025 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-12 16:12:52 +00:00
Steven Franke
f803c5cf6f Add new MSK144 encoding routines and make the necessary accommodations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7022 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-11 19:25:20 +00:00
Bill Somerville
afed56d008 Proper splash screen and release notes help menu link
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7007 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-06 13:52:14 +00:00
Joe Taylor
9684106dd7 1. Fix the nfqso < nf1 but in qra64.f90.
2. Delay splash screen until after main window starts.
3. Keep cbTxLock enabled in QRA64 mode.
4. Update v1.7_Features.txt.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7005 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-05 14:14:24 +00:00
Joe Taylor
9993760bac Re-enable MSK144 click-to-decode, top panel only.
Fix the improper display of "Fast" checkbox.
Disable "CQ nnn" checkbox if MyCall is not K1JT or K9AN.
Use AppDir as path to execute the LDPC encode program.
Don't display submodes in mode label for JTMSK, MSK144.
Make Rx Freq spinner invisible in MSK144 mode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7001 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 19:30:27 +00:00
Joe Taylor
5d68d2f1c8 Quantize short reports to 4 bits: -3 0 3 6 10 13 16 RRR 73.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6998 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 16:05:10 +00:00
Joe Taylor
dc7826d5ea Startup messge box for Alpha Release. New sigma limit in detectmsk40. Minor tweaks to GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 15:20:16 +00:00
Joe Taylor
b299c8d5ad For now, remove the restrictions on use of QRA64 and MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 20:40:49 +00:00
Joe Taylor
ab8b6d0383 Move ldpc temporary files into platform-independent location.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6991 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 19:04:21 +00:00
Joe Taylor
8159e2da50 Tentative and temporary change to encode MSK144 in a separate process.
NB: temporary files are being written to execution directory!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6989 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 15:34:42 +00:00
Joe Taylor
289ba66119 1. Fix cause of "frozen UTC" bug in MSK144 mode. (Could there be more than one cause?)
2. Fix failure to remember Ftol setting in MSK144 mode.
3. Remove obsolete controls from Advanced tab.
4. Add control for "x 2 Tone spacing" on Advanced tab.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-01 19:46:19 +00:00
Joe Taylor
5de024d9ba Correct the value of nsym for sending an MSK144 short message.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6979 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-30 20:20:54 +00:00
Joe Taylor
2cf32da1ea Change the MSK144 short-message frame size from 32 to 40 symbols.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6972 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-30 02:06:18 +00:00
Joe Taylor
2b6ff14e4b MSK144 fixes: Click on lower panel of Fast Graph decodes from previous file; clicking beyond available data does not crash program.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6964 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-29 16:10:55 +00:00
Joe Taylor
e432dc421a First good decode in submode QRA64D.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6961 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-28 15:18:06 +00:00
Joe Taylor
dbe0f7b099 During tests, at least, allow use of Tx Freq spinner with VHF features enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6943 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-23 14:59:25 +00:00
Joe Taylor
d1e23bdac8 Fix some potential bounds errors in setting frequency limits. Implement submodes QRA65B-E on the Tx side.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6942 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-23 13:22:34 +00:00
Steven Franke
a0231e1417 Fix QSY message when answering CQ nnn.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6933 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-20 23:42:20 +00:00
Joe Taylor
ef217b9dce When auto-sequencing, don't change Tx msg if we're calling CQ and receive a 73.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6919 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 17:50:28 +00:00
Joe Taylor
a48af8057b Add callsigns to temp list.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6918 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 17:19:18 +00:00
Joe Taylor
9544f60b5a Implement "pick to decode" on the MSK144 horizontal waterfall.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6917 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 17:06:52 +00:00
Joe Taylor
715d526601 In MSK144 mode, restrict the range of Ftol to values 50, 100, 200.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6915 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 15:18:55 +00:00
Joe Taylor
596b62b37e Fix a defect that could cause mis-naming a .wav file in fast modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6914 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 14:22:05 +00:00
Joe Taylor
4f0cfd6800 Max report in MSK144 is now +24 dB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6913 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 23:13:42 +00:00
Joe Taylor
b7d4b277aa Replace the "+" sign in display of positive dB reports.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6912 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 20:32:48 +00:00
Joe Taylor
97b987f77f Reports in MSK144 mode are even numbers between -4 and +24 dB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6910 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 20:05:56 +00:00
Joe Taylor
857388722d When MSK144 message is changed between long and short format, must inform Modulator.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6909 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 19:17:47 +00:00
Joe Taylor
211f8ba291 Save/Restore status of Sh box. Limit range of auto-generated short-message
reports to -4 to +10 dB.  Include +/- sign in all reports.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6907 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-12 15:45:27 +00:00
Bill Somerville
feb7b2751f Fix regression in azimuth display on main window
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6906 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-11 23:35:24 +00:00
Bill Somerville
c586204d75 Add proper Qt validation for callsigns and grids
Two      new     validator      classes     CallsignValidator      and
MaidenheadLocatorValidator   are   introduced    and   used   in   the
Configuration and MainWindow implementations.

MaidenheadLocatorValidator  supports  different  lengths  and  minimum
required  lengths  with  a  default of  subsquare  with  square  being
required.

The  message_aggregator  application has  been  enhanced  to show  the
current DX call and DX grid as shown in the WSJT-X main window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-10 22:20:30 +00:00
Bill Somerville
396dd6d491 Furter attempts to get the Tx watchdog and its UDP Status Message right
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6901 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-09 18:35:25 +00:00
Bill Somerville
e7e5e3f340 Further Tx watchdog refinements
This should allow receivers of UDP Status messages to accurately track
the Tx watchdog status. Also some defects in the Tx watchdog logic are
repaired.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6900 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-09 02:27:57 +00:00
Bill Somerville
46ff34a04a Refactor a poor variable name
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6898 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 20:45:45 +00:00