Steven Franke
74d6d9e8a9
Update subroutine calls in the command line MSK144 decoder msk144d2.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7151 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-05 00:38:44 +00:00
Joe Taylor
bda40d5c5d
Send MyCall, HisCall, and state of Sh checkbox to mskrtd, to enable MSK144 Sh messages with the realtime decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-04 14:01:02 +00:00
Steven Franke
c69c1be97c
Improve sensitivity of msk40spd.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7149 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-04 00:49:38 +00:00
Steven Franke
7ae8cadd81
Simplify/unify determination of navgd.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7148 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 22:57:20 +00:00
Joe Taylor
a852efc33f
Always use "&" for MSK144 decodes. Add single digit at end of line to indicate number of frames coherently averaged. THIS REVISION IS NOT INTENDED FOR USE ON THE AIR.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7146 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 20:28:27 +00:00
Steven Franke
d9e4b7eede
More progress on MSK40 decoder. THIS REVISION IS NOT INTENDED FOR USE ON THE AIR.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7145 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 20:18:53 +00:00
Joe Taylor
6dcdee836e
Further speed improvements for MSK144 RT decoding. Fiz what I broke in the "click-on-CQ-message" logic.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7144 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 17:08:02 +00:00
Joe Taylor
4895b5f8ba
More complete definition of CPU usage for MSK144 RT decoding. Speed is back
...
to that of r7139.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 13:48:30 +00:00
Joe Taylor
672a4e88b5
MSK144 mode: minimum Ftol=20; report received copied to Log screen; spots sent to PSKreporter.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:16:47 +00:00
Steven Franke
69d579388b
First steps toward realtime short ping decoder for MSK40.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 01:43:31 +00:00
Joe Taylor
31032468a9
Storage for cdat2 must be on a "per thread" basis.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7132 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 01:30:41 +00:00
Steven Franke
6c7f112384
Delete unused nav(6) array in mskrtd. Minor fix to command-line tool msk144d2.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7131 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 00:05:20 +00:00
Bill Somerville
c7c50830bf
Fix a crash which appears to be a stack size limitation
...
This issue was probably triggered by OpenMP forcing some large arrays
onto the stack where Fortran might normally make them static. The
change that seemed to make the difference was putting cdat2 in
msk144_freq_search into static storage. I am not convinced that the
problem is really solved but it works for now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7130 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 23:32:01 +00:00
Steven Franke
98cfad968f
Update msk144d2 to work with recent changes in genmsk144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7129 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 21:09:28 +00:00
Bill Somerville
7644a79c0b
Make new OpenMP code compile without OpenMP support
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7128 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 16:59:18 +00:00
Joe Taylor
435c132bac
Simplify the multi-threading code in msk144sync().
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7127 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 16:52:16 +00:00
Joe Taylor
5ecd85570d
Multi-threaded real-time MSK144 decoder. Needs further testing!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7126 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 15:56:55 +00:00
Joe Taylor
845420f2b2
Disable OpenMP in msk144sync. As initially coded it's no improvement.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7123 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 23:44:24 +00:00
Joe Taylor
69ccd03736
Implement "R FN20", etc., in contest-mode MSK144 messages. (Tx only, so far!)
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7121 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 20:24:45 +00:00
Joe Taylor
7dd6d1c949
Correct two constants used in msk144sync.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7120 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 17:37:03 +00:00
Joe Taylor
bee5ea4c71
Minor cleanup; add some !$OMP stuff to msk144sync.f90, but it's not yet functional.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7119 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 16:39:14 +00:00
Steven Franke
9d49b88ca8
Revise some comments. No code changes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7118 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 15:35:45 +00:00
Joe Taylor
7664a29fb6
Minor code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7117 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 14:46:12 +00:00
Steven Franke
ebd7ac02b3
Drop Fast and Normal decoding depths down one notch.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7115 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 03:01:32 +00:00
Steven Franke
4b9b6d8596
Wire up Fast/Normal/Deep decoding options for MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7114 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 22:13:07 +00:00
Joe Taylor
57a5ad188d
Send ndepth (value = 1, 2, or 3) to hspec(). MSK144 click-to-decode now calls
...
the old fast_decode(); probably it should call hspec() instead?
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 20:41:41 +00:00
Steven Franke
766c978709
Make frequency search more efficient in msk144 realtime decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7111 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 20:37:30 +00:00
Steven Franke
3ea464c785
Make msk144spd properly track the RxFreq spinbox.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7110 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 12:53:07 +00:00
Steven Franke
f210e47cd5
MSK144:
...
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines.
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Steven Franke
3df371f11b
New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-23 22:28:11 +00:00
Steven Franke
9831fb9cfc
More work on real-time decoder for msk144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7107 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 19:42:05 +00:00
Steven Franke
be0c4f15c1
More work on real time decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7105 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 00:03:44 +00:00
Steven Franke
5df0bbcd50
Fix what I broke.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7104 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 22:51:06 +00:00
Steven Franke
50d505c3b8
Remove diagnostic write.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7103 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:47:29 +00:00
Steven Franke
d97b2febdf
Add command-line routine to test real time msk144 decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7101 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:22:48 +00:00
Steven Franke
8d24c33a00
Move decoding of synced frame into a subroutine.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7100 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:21:24 +00:00
Joe Taylor
109caa8912
Add real-time decode routine.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7098 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:35:00 +00:00
Joe Taylor
3b97ae7417
Implement real-time decoding in MSK144 mode, for testing.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
Joe Taylor
6040d761c4
Too much spectral smoothing? Omit call to smo121.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7096 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-18 15:34:15 +00:00
Steven Franke
dda9f24b9d
Decrease execution time of the most time-consuming loop in opdetmsk144.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7095 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 22:59:21 +00:00
Steven Franke
1acefe669a
More work on opdetmsk144.f90 - clean up, generalize it a bit, and fix printed time estimate.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7094 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 21:22:00 +00:00
Joe Taylor
c4d00b0f47
1. Display proper UTC on Fast Graph for files read from disk.
...
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 13:34:40 +00:00
Steven Franke
71443a9396
Open up the range of record sizes that opdetmsk144 will accept.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7091 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 22:00:29 +00:00
Steven Franke
538f814905
Fix a bug in wspr callsign packing that affected wsprsim and signal subtraction for a subset of callsigns.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7090 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 19:38:18 +00:00
Joe Taylor
b15e3aed04
when TRperiod < 30 s, expand the Fast Graph scale so full width is 15 s.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 14:18:40 +00:00
Joe Taylor
228050cf61
Temporarily (?) re-activate MSK144 click-to-decode from lower panel of Fast Graph.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7087 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 19:23:30 +00:00
Steven Franke
2402fa8fa8
Limit frequency search to plus/minus ntol.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7083 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-14 22:29:15 +00:00
Steven Franke
1c5a7e0fbc
Enhance click-to-decode performance in MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7082 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-14 22:18:58 +00:00
Joe Taylor
13ffbb20eb
Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00
Joe Taylor
193cbff60b
Don't write Nico's SNR dump!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7061 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 12:10:09 +00:00