134 Commits

Author	SHA1	Message	Date
Bill Somerville	5bf8ba4f55	Consistent behaviour with respect to prompt to log and auto log	2021-08-18 13:38:49 +01:00
Bill Somerville	37bbcbc7cf	Repair a long-standing defect with 72-bit modes message generation ... This defect caused source messages to be incorrectly generated when using a compound callsign. This repair also fixes some issues with Q65 mode related to source message generation.	2021-06-27 16:45:33 +01:00
Joe Taylor	e3de62152d	No need for m_s6 to be a member variable. Use a local s6 instead.	2021-06-10 16:34:05 -04:00
Joe Taylor	5492b82bde	No need for m_nseq to be a member variable. Use a local nseq instead.	2021-06-10 16:30:03 -04:00
Joe Taylor	83758c40da	Remove all remaining references to m_modeTx. We no longer support dual-mode operation, so it's not needed.	2021-06-10 15:20:36 -04:00
Joe Taylor	d3782d7d00	Correct the function name.	2021-05-31 16:19:29 -04:00
Joe Taylor	76de6ac299	Add MaxDrift tooltip. Add Quick-Start Guide for WSJT-X 2.5.0 & MAP65 3.0 to Help menu.	2021-05-31 16:07:49 -04:00
Bill Somerville	f3cb1d76c0	Repair a long standing defect with per band Tune & Tx power levels	2021-04-22 23:05:07 +01:00
Joe Taylor	314a506d51	Remove ISCAT mode.	2021-03-03 11:50:34 -05:00
Joe Taylor	b1c41932b1	Another try at keeping signal report constant within a QSO.	2021-02-06 13:01:28 -05:00
Joe Taylor	2f4cf2f406	Revert "Tentative fix to keep the transmitted signal report constant during a QSO. Please test!" ... This reverts commit 70f460355b.	2021-02-06 12:12:20 -05:00
Joe Taylor	70f460355b	Tentative fix to keep the transmitted signal report constant during a QSO. Please test!	2021-02-05 16:16:53 -05:00
Joe Taylor	1f9eeb52cc	Add user option for Auto_Clear_Avg after a decode.	2021-01-15 14:12:52 -05:00
Joe Taylor	044aa80dc4	Remove all vestiges of the QRA64 mode. It has been replaced by Q65.	2020-12-21 15:07:53 -05:00
Bill Somerville	c9f9c1d7c8	Merge branch 'develop' into feat-fst280	2020-12-07 20:43:28 +00:00
Bill Somerville	60792182ad	Environment variables to set audio buffer sizes and fix Windows Rx timing ... The two environment variables: WSJT_RX_AUDIO_BUFFER_FRAMES WSJT_TX_AUDIO_BUFFER_FRAMES each can be defined to an integer number which will be used as the suggested audio buffer size for Rx and Tx respectively. Not setting the variable or setting it to zero or less will cause the default buffer size to be used, which should be a good choice for most, if not all, systems.	2020-12-07 20:34:56 +00:00
Bill Somerville	3d9a099fce	Reinstate changes that were reverted from commit df2daf6 ... Changes were moved aside to simplify a big merge commit with many conflicts.	2020-12-07 00:18:52 +00:00
Bill Somerville	2964bc6295	Merge branch 'develop' into feat-fst280	2020-12-06 22:27:07 +00:00
Bill Somerville	f290cec93b	Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls." ... This reverts commit df2daf60bd.	2020-12-06 17:51:06 +00:00
Bill Somerville	50d0543c03	Test version with environment variable to set Tx audio buffer size ... WSJT_TX_AUDIO_BUFFER_FRAMES takes the following values: -1 - use Qt/system default 0 - use 200 mS (WSJT-X default) +ve integer - value is number of frames at 48 kHz -1 is likely to be a good choice on Windows and may macOS. 0 has proven to be good on Windows. On Linux 0 may be OK but we need to try other values. The value is only a hint, the actual value used along with the period size (the size of each chunk of samples requested by the system) is printed in an info level diagnostic message at the start of each transmission.	2020-12-03 01:49:21 +00:00
Bill Somerville	3663b3ea32	MultiGeometryWidget template class abstracts window geometry changes	2020-11-27 01:14:12 +00:00
Joe Taylor	abe06e5dbb	Access Q65 Quick-Start Guide from Help menu.	2020-11-17 10:46:20 -05:00
Joe Taylor	df2daf60bd	Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls.	2020-11-16 10:06:10 -05:00
Bill Somerville	9ea903b259	Merge branch 'develop' into feat-boost-log	2020-11-12 13:36:25 +00:00
Bill Somerville	c7f2fdc404	Ensure Tx1 message is used by non-standard callsign holders ... The only exception is type 2 prefix/suffix calls in non-77-bit modes.	2020-11-12 13:30:48 +00:00
Bill Somerville	ab780a324a	Testing options ... Two new environment variables to control special testing behaviour: * WSJT_TX_BOTH - set to "1" to force transmission on both periods. * WSJT_REVERSE_DOPPLER - set to "1" to transpose Tx and Rx Doppler corrections. Use this to test Doppler tracking on a terrestrial link.	2020-11-06 18:28:59 +00:00
Joe Taylor	9b452e8f99	Change mode name QRA65 to Q65 everywhere, supposedly.	2020-10-25 13:58:18 -04:00
Bill Somerville	d8b16b31f4	Merge branch 'develop' into feat-boost-log	2020-10-13 19:20:37 +01:00
Bill Somerville	314be8ccb7	Merge branch 'develop' into feat-fst280	2020-10-06 19:25:06 +01:00
Bill Somerville	522000cfab	Added SWL Mode to View menu ... SWL mode hides all lower panel widgets, maximizing the size of the decodes windows. Designed for operators running several instances to monitor multiple bands and modes.	2020-10-04 23:05:17 +01:00
Bill Somerville	f8e5903f83	Merge branch 'develop' into feat-boost-log	2020-10-04 22:47:01 +01:00
Bill Somerville	add63fb374	Adapt WSPRnet.org spotting to moveable Rx analysis window ... This allows spots at any frequency to be posted rather than just those in the 1400 to 1600 Hz range above the VFO dial frequency.	2020-10-04 22:41:52 +01:00
Bill Somerville	a169b5daf8	Added SWL Mode to View menu ... SWL mode hides all lower panel widgets, maximizing the size of the decodes windows. Designed for operators running several instances to monitor multiple bands and modes.	2020-10-04 00:46:59 +01:00
Bill Somerville	837821b117	Merge branch 'develop' into feat-boost-log	2020-10-01 19:55:53 +01:00
Bill Somerville	204d63929d	Repair a regression with odd/2nd period FT4 decode timestamps ... Generalized slow mode decode timestamp generation to a common routine.	2020-09-29 12:32:47 +01:00
Joe Taylor	7fd2f1afe6	Change QRA66 to QRA65, on the C++ side.	2020-09-25 13:20:46 -04:00
Bill Somerville	e50e712fdd	Start using class NonInheritingProcess	2020-09-24 17:57:06 +01:00
Joe Taylor	9fe2fc6de0	Fix two problems: sometime incorrect setting of RxFreq in WideGraph, and incorrect timestamp for FST4W-120 and FST4W-300 decodes in ALL.TXT.	2020-09-21 14:35:16 -04:00
Joe Taylor	52bdd57e57	Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value.	2020-09-18 11:30:23 -04:00
Joe Taylor	2266e8dbb7	Add FLow and FHigh spinner controls to set the FST4 decoding range.	2020-09-16 17:02:40 -04:00
Bill Somerville	5fdcd8c15a	Merge branch 'develop' into feat-fst280	2020-09-11 20:06:20 +01:00
Joe Taylor	b6f990fac2	Allow FTol values down to 1 Hz; let maximum FTol values for FST4 depend on TRperiod.	2020-09-10 13:33:33 -04:00
Bill Somerville	db6a432a33	Ensure band/frequency combo box edit styling tracks current frequency	2020-09-08 15:24:55 +01:00
Joe Taylor	72cffc9da4	Make the FST4/FST4W Quick-Start Guide available from the Help menu.	2020-09-06 13:31:19 -04:00
Joe Taylor	4ab8780dd8	Code cleanyup associated with removing Tab 2.	2020-09-05 15:22:18 -04:00
Joe Taylor	7aeb9d5e2e	Remove the "Tab 2" option for generating Tx messages.	2020-09-05 15:11:32 -04:00
Joe Taylor	c1025b7c4c	Allow user to set center frequency and FTol in FST4W mode. Needs more testing!	2020-09-05 10:34:55 -04:00
Bill Somerville	4a2a181528	Merge branch 'develop' into feat-fst280	2020-08-17 18:33:00 +01:00
Bill Somerville	e17ad223ae	Tx Next button enables automatic Tx ... Also a number of WSPR/FST4W code clean-ups including getting the Tx Next button to function as intended.	2020-08-15 02:57:23 +01:00
Bill Somerville	02e19b687f	Status message to report approximate # of dropped Rx audio frames ... This is a first cut at this to evaluate buffer size adjustments on supported platforms. A final version might limit status bar reports to >1000 dropped frames or similar.	2020-08-08 17:12:48 +01:00