New command-line option for jt9: [-m nthreads]. Default is nthreads=1.
Also refactored a loop in filbig.f90 that was taking far too much
time.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4916 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Since the last monitored dial frequency is stored and restored from
the settings the +2kHz setting should only set the state of the check
box when initializing and not attempt to adjust the dial frequency.
Merged from the wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The PollingTransceiver class was not dealing with frequency change
commands correctly when the mode was not specified.
Improved some diagnostic messages.
Only leave transmit mode when PTT is seen to drop.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4886 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Thanks to Mike W9MDB for contributing this as a patch. Also added a
few more in elsewhere.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4883 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also cleaned up duplicate trace output.
Using the DX Lab Suite Commander CAT interface with rigs like the
TS-2000 requires that split mode be set after changing the Tx
frequency. This is because setting teh Tx frequency disables split
mode.
With some Icom rigs the rig must be in split mode before setting the
Tx frequency otherwise the Tx frequency change will not be honoured.
To fix this the sequence set-split, set-tx-frequency, set-split must
always be used to change the Tx frequency.
Support for new DX Lab Suite Commander TCP/IP commands
Dave AA6YQ has added two new commands to the Commander server to allow
more reliable control.
Requires DX Lab Suite Commander 11.1.4 or later.
Ensure split Tx frequency agrees with UI before transmitting
Ensure split works on Yaesu via Hamlib without breaking others
Also improved class HamlibTransceiver debug trace messages.
Merged r4776-r4779 from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Pass the temporary directory to jt9 and use it to give the correct
paths to temporary files. Also jt9 passes the absolute path to
kvasd.dat in the temporary directory to kvasd.
Clear out all the annoying cruft that has accumulated due to having to
run with $CWD as the temporary directory.
Use QStandardPaths to find the writable data directory where needed
rather than passing it around between objects. This now works because
the $CWD hasn't been changed.
Do away with the CMake option WSJT_STANDARD_FILE_LOCATIONS as it is no
longer needed.
Fix astro status file azel.dat formatting.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
When tab 2 is current the action of F4 is to set the next message to
transmit the standard
Merged from branch wsjtx-1.4.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4693 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also complete the wrapper code in wisdom.c.
TBD: should be possible to use fftw3f.f03 instead of the ad hoc wisdom.c.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4617 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Routine packmsg now tries the shortlist (Type 1 prefix or suffix) first.
Then it tries to to make a valid message using a Type 2 prefix or suffix.
If both fail, it packs the first 13 characters as a free-text message.
The GUI now generates the most useful messages with compound callsigns
of all valid types.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
To allow for intermittant CAT failures one retry before bringing up a
message box should allow many setups to be more reliable.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4473 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Since the log files have moved to a hidden directory a menu action to
open the logs directory in a suitable system applicaiton is needed.
Added "Open log directory" to File manu bar pop up menu.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Because of confilicts using the shared memory to communicate with jt9
only one instance of WSJT-X may run with each unique key (rig name).
Added a QLockFile for each unique key in the temp directory and logic
to deal with stale locks and retries.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
If built with qmake the version string will now be "Not for Release"
since some many features essential to making a complete package are
currently only build when using CMake.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4372 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The location of documentation files on Linux distributions is
controlled to a certain extent. Using the QStandardPaths::locate()
method helps us with this.
Work round the misbehaviour of QCoreApplication::applicationDirPath()
when the CWD has been changed by working out the documentation
location before changing the CWD to a temporary directory. This path
is now provided by the Configuration settings class which also manages
other run time paths.
Updated Debian packaging to move a little nearer a conforming DEB
file.
Added a basic manpage for rigctld-wsjtx.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4364 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
All message entry fields on the mainscreen and in the macro editing
facilities are now restricted to valid characters in the JT65/JT9 free
text message alphabet.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4362 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Do not drop through shortcut key handling so that spurious responses
are avoided.
The keyPressEvent handlers must call the super class implementation if
the event os not handled.
Correct a typo in the shortcut help display.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
So that a manual can be viewed without an Internet connection a second
manual action has been added to the WSJT_X help menu. This shells out
to the default web browser with a local file target.
The build has been enhanced to install and package the current version
of the HTML user manual as downloaded from the project web site at
build time
The package file locations have been adjusted to be compatible with
the QStandardPaths class so that its locate() method can be used to
portably access resources like this local help file
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The message generation code doen't allow for a mode change on the fly
so this has been disabled.
Also and decode double click that would change a message or change
mode or change a frquency that gets disallowed is ignored i.e. the
outgoing message is not changed either.
Remove a duplicate Tx message in decode window that crept in in a
prior change.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4353 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The Plus 2 kHz check box should not be enabled during transmit if the
"Allow Tx Frequency Changes While Transmitting" is not checked.
Also fixed a defect that caused the disabled during Tx state of some
widgets to not clear due to transmit or tune period being shorter than
a poll interval. Fixed by ensuring PTT changes are always signalled
rather than waiting for the next poll.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4352 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
WSJT-X was attempting to set the split Tx frequency when a dial change
from the rig is detected. Because of the way some rigs and rig servers
report the Tx frequency while the rig is in Tx mode this was causing
the rig to "walk" along the band. Setting of split Tx frequency has
been limited to WSJT-X initiated instances only.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4350 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some rigs either do not honour some CAT commands while transmitting or
interpret them incorrectly. To deal with this a settings option to
allow TX frequency changes while transmitting has been added with a
default value of off.
Any UI actions that directly or indirectly change the TX frequency are
guarded according to this new option. As well as this band changes and
use of the +2kHz check box are disabled and guarded respectively in
transmit mode.
Mode changes via the menu are now disabled while transmitting.
When TX frequency changes are allowed; frequency changes are correctly
implemented while in tune mode.
Double clicking decodes while transmitting now correctly regenerate
and change the message sent on the fly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Monitor mode was not being enabled when clicking the "Tune" button
which could mean that neither split mode nor the correct TX frequency
were being set.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Since the manual URL is used in both the installer and the WSJT-X code
the definition of the URL (CMake variable PROJECT_MANUAL) is defined
in the CMakeList.txt file and propagated to the source via the
wsjtx_config.h header.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4252 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The Qt test mode that uses special paths for writeable files (via
QtStandardPaths) doesn't make a special temporary file path. This
change appends " - test_mode" to the WSJT-X unique temporary file path
so that an application run in test mode will not interact with another
running in normal mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4240 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Sometimes parts of the application are not fully ready for release at
release time. This option allows such features to be enabled
conditionally at configure time.
The CMake option WSJT_ENABLE_EXPERIMENTAL_FEATURES is used to control
this ability. Normally you will not need to change it as it behaves
in a reasonable way. The option is ON in debug build configurations
and OFF in non-debug configuratiuons.
The option is made available in all source modules via the
WSJT_ENABLE_EXPERIMENTAL_FEATURES macro which is defined to 1 if the
option is ON and to 0 if it is OFF.
Since this default behavior is potentially dangerous because it can
mean that release builds contain different code from debug builds; the
option may be set to OFF in debug configurations in the normal way
(cmake-gui, edit CMakeCache.txt, etc.) to achieve a debug build
similar to a default release build.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The validation processing of the free text line edit field was causing
the cursor position to be lost.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4148 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some non-modal help windows were not being automatically closed on
application exit.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
It is now possible to override the default locations hard coded in
this file with local preferences.
The variables that can be overridden are HAMLIB_DIR and DESTDIR.
To override, add local variable assignments on the intial qmake
command line. E.g.:
qmake HAMLIB_DIR=c:\my\local\hamlib\installation DESTDIR=c:\my\local\install\destination
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The new suspend/resume approach to the received audio stream causes a
reset to the input sample buffer on resume. This is desired behaviour
except when the stream in not actually suspended. The monitor function
was not checking this when resuming monitoring and this caused decodes
for a period to be abandonded simply by using the "Halt TX" button to
turn off automatic transmission mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
all types of build.
CMake builds use 'svn info' (the git-svn equivalent is also supported)
to get the real latest revision of the workspace that is used to
source a build. If the sources are not in VCS workspace (build from
source snapshot archive for example) then the $Rev$ svn keyword
expansion in mainwindow.cpp is used despite its issues with accuracy.
Non-CMake builds use the $Rev$ keyword expansion where possible.
If a CMake build is from a VCS workspace with local modifications; a
'-dirty' suffix is added to the revision number to denote that.
If no revision number information can be found the word 'local' is
used as a revision number.
The revision specification is used in the WSJT-X "about" box and is
sent to PSKReporter.info as part of the local station information
(this can be viewed at the statistics page
http://pskreporter.info/cgi-bin/pskstats.pl).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4017 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Simplified some of the TX logic and removed some redundant code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4014 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
No longer any need to have a mute mechanism since the TX shutdown
mechanism is sufficient.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4012 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
In an effort to reduce the processing overhead when transmitting I
have suspended the audio input stream at source instead of the prior
behavior that simply idled skipping received samples.
This is in response to high activity levels, especially with JTAlert
also running, when decode processing rolls over into the next TX
period.
Tests show a reduction in CPU loading from ~5% to ~1.5% in the above
scenario. Hopefully this will reduce the likelyhood of TX audio
glitches when other system activity spikes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3986 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
default).
Reorganized Modulator interface so that it can control the stream
it writes to.
Make sure only QAudioOutput::stop is called at the end of sending
rather than QAudioOutput::reset which discards pending samples.
Added a quick close option to the Modulator::stop slot to discard
pending buffers if required.
Fix issue in CW synthesizer that was causing CW to be inverted
occasionally.
Made global arrays of symbols volatile because compiler waa
optimizing away reads in sound thread. These global variables
must go eventually as they are a multi-threading hazard.
Simplified TX sequencing to remove some duplicate signals.
Increased range of TX attenuator from 10dB to 30dB. This is mainly for
non-Windows platforms where the attenuator isn't linearized correctly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3985 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
