Commit Graph

211 Commits

Author SHA1 Message Date
Bill Somerville
9f1cd9defd Fix issue with v1.8.0 trashing v1.7 working frequencies
Note  that  reverting  to  v1.7  will  invalidate  any  saved  working
frequencies  from v1.8  but proceeding  to v1.8  again will  present a
reset set of working frequencies i.e. any user defined entries in v1.8
will be lost of a v1.8 -> v1.7 -> v1.8 transition is made.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8018 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-09 16:06:17 +00:00
Bill Somerville
e910277ebe Force Settings tab to Radio tab when navigating there from a rig error message
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7947 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 01:38:37 +00:00
Bill Somerville
c71b72c824 Fixes the issue with the IARU Region setting not being saved and restored correctly
Use proper QDataStream insertor  and extractor for IARURegions::Region
enum. Unfortunately  this requires that  all will have to  reset their
region one more time even if it was working and correct.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7867 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-13 18:02:07 +00:00
Bill Somerville
817d4d98c7 Use model row to express region rather than name string
For some  unknown reason on some  machines the string version  of the
name does not match the model IARURegions names.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-11 01:59:19 +00:00
Bill Somerville
94cec5bdc1 IARU region specific working frequencies
Working  frequencies can  be for  all regions  or for  individual IARU
regions. This allows each mode band  tuple to have one or more working
frequencies which  can include local  ones only offered when  the user
configures their IARU region.

Change  working  frequency  default   suggestions  to  better  fit  in
FT8. General  rule is FT8  is at JT65 -2kHz  except where that  is not
possible e.g. where  that would fall into a segment  not allocated for
narrow band data modes. For tight  bands like top band sqeeze existing
JT65 and JT allocations to allow space for FT8.

NOTE: this change changes the WSPR frequency on 80m to allow access to
JA stations that currently have no allocation where it was placed.

ALSO NOTE: the JT65 and JT9 frequencies for 80m move down 6 kHz, again
to  accommodate region  3  users. Other  appliactions  not within  our
control should be asked to move in step when 1.8.0 is released.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7810 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 23:11:41 +00:00
Joe Taylor
91fbeff072 Many GUI adjustments for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 15:24:56 +00:00
Bill Somerville
bd925c9228 Add some extra diagnostic trace for available audio devices
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7667 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-07 15:14:33 +00:00
Bill Somerville
0e214efb9c Rework install locations for better flexibility
Using the  CMake module  GNUInstallDirs to  set up  standard locations
which allows  better customisation for packagers  building for various
distributions.

The change does change some internal package file paths and will leave
some  files  in  old   locations  in  Windows  installations.  Running
uninstall  is probably  wise  on Windows  before  installing this  new
package layout if future clean uninstalls are desired.

Linux and other  *nix package maintainers can use  the CMake variables
CMAKE_INSTALL_xxx to vary the install paths of various components. See
the  CMake GNUInstallDirs  module documentation  for more  details. An
example might be for Slackware where package documents are expected to
be                            installed                           into
<install-prefix>/doc/<package-name>-<package-version>/ whereas the GNU
default         is         to        install         them         into
<install-prefix>/share/doc/<package-name>/.  To achieve  this set  the
CMake variable CMAKE_INSTALL_DOCDIR as follows when configuring:

cmake -D CMAKE_INSTALL_DOCDIR:PATH=doc/wsjtx-1.7.1 -D CMAKE_INSTALL_PREFIX= ...

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-28 13:03:48 +00:00
Bill Somerville
cecc098924 First attempt at a UI phase compensation tool for MSK144
This builds on the static phase compensation in the MSK144 decoder and
the phase  analysis and  polynomial fitting  capabilities also  in teh
MSK144 decoder,  by allowing  captured data to  be selected  for phase
equalization from the WSJT-X UI.

Reads  captured phase  compensation  curve  estimate files  containing
fitted  polynomial coefficients  and measured  phase data  from MSK144
receptions. Intent  is to select a  compensation curve that is  from a
known transmitter like  an SDR which have good  phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A  suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.

Plots of  the currently  selected polynomial  and its  modified higher
order terms  polynomial which is  actually used in  equalization (this
plot may  be dropped - it  is just for  kicks at the moment).   When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.

Basic  maintenance  is also  included  allowing  clearing and  loading
captured  plots and  an option  to revert  to a  flat no  equalization
curve.

More to come on this as  amplitude equalization is also possible, this
will probably  be similar, maybe even  plotted on the same  graph with
dual  axes  for phase  and  amplitude.   Amplitude correction  from  a
measured  reference   spectrum  could  be  viewed   and  selected  for
equalization for all modes. TBC...

This   change    also   introduces    the   QCustomPlot    3rd   party
widget. Currently this  is statically linked from a  qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring  has been  completed,  which  is more  in  line with  the
QCustomPlot author's  intentions. This  will allow efficient  reuse in
other tools shipped with WSJT-X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 02:13:13 +00:00
Bill Somerville
26a581a482 Ensure that Mode=None is enforced when setting or resetting PTT
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7557 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-31 19:47:51 +00:00
Bill Somerville
ee7aa0d31e Track rig mode
I can't remember exactly why mode tracking was disabled but it doesn't
seem to be necessary  to do so. I am expecting  some fallout from this
change, when I discover why it was  necessary to ignore the rig mode I
will find a better way to do this.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7548 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-21 12:16:16 +00:00
Steven Franke
02a4cb95a4 Add an option on advanced time to enable MSK144 Rx filter equalizer. Other changes necessary to accommodate coexistence of static (Rx Filter) and dynamic (QSO partner-dependent) phase corrections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7421 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:21:23 +00:00
Joe Taylor
8cf4fd2f8e No longer any need for the checkbox labeled "Rx frequency offset with CQ nnn" on the Settings -> General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7343 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 16:20:57 +00:00
Joe Taylor
0441986ccc Add the W9MDB patch (very slightly modified) for band-by-band memory
of power settings for Transmit and Tune.  Also an interim update of
v1.7_Features.txt.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7229 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 20:24:09 +00:00
Joe Taylor
995fcf5359 1. Gray-out "Include averaging" and "Include Deep Search" if not in JT4 or JT65 mode.
2. Make the "MSK144 Realtime decode" checkbox invisible, in preparation for removing it entirely.
3. Always use RealTime decoding in MSK144 mode.  (For now, at least, click-to-decode works as before.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 18:21:45 +00:00
Joe Taylor
3b97ae7417 Implement real-time decoding in MSK144 mode, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
Joe Taylor
73612cf6a5 Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:37:00 +00:00
Joe Taylor
d3182f4161 Remove the "Robust sync" option.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 17:26:05 +00:00
Joe Taylor
ec281f93c4 Add a user control for Tx Delay, on the Advanced tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 23:18:48 +00:00
Bill Somerville
424ed88645 Take advantage of the forthcommng DX Lab Commander enhancement
V12.2.6 of  teh DX Lab Suite  Commander finally has a  way to suppress
mode rationalization  when setting  the split  Tx frequency.  This now
means that we  can now honor the  radio setting to not  change the rig
modulation mode. This  should help with a number of  rigs that require
different modes  on teh Tx and  Rx VFOs for optimal  wide band digital
operation.  This   will  also  help   with  some  rig   and  interface
combinations that lock  up or otherwise misbehave when  setting the Tx
VFO mode at certain times with respect to other rig control commands.

This change also improves mode  setting in general hopefully closing a
few corner case issues when starting  up and when transmitting for the
first time in a session.

Included  is  the  latest  DX  Lab  Suite  Commander  TCP/IP  commands
documentation correct for v12.2.6.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7030 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-13 23:33:54 +00:00
Joe Taylor
289ba66119 1. Fix cause of "frozen UTC" bug in MSK144 mode. (Could there be more than one cause?)
2. Fix failure to remember Ftol setting in MSK144 mode.
3. Remove obsolete controls from Advanced tab.
4. Add control for "x 2 Tone spacing" on Advanced tab.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-01 19:46:19 +00:00
Bill Somerville
c586204d75 Add proper Qt validation for callsigns and grids
Two      new     validator      classes     CallsignValidator      and
MaidenheadLocatorValidator   are   introduced    and   used   in   the
Configuration and MainWindow implementations.

MaidenheadLocatorValidator  supports  different  lengths  and  minimum
required  lengths  with  a  default of  subsquare  with  square  being
required.

The  message_aggregator  application has  been  enhanced  to show  the
current DX call and DX grid as shown in the WSJT-X main window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-10 22:20:30 +00:00
Bill Somerville
3f1ea9d10c Make message boxes more platform independent with a wrapper
Instead  of  using the  Qt  QMessageBox  class  directly a  new  class
MessageBox  (MessageBox.hpp)  has been  added  to  deal with  platform
independence issues like the title not being shown on Mac OS X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-03 20:31:19 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 11:36:59 +00:00
Bill Somerville
a3ab57bea7 Ensure rig calibration parameter changes are used immediately
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-19 17:36:15 +00:00
Bill Somerville
8e43af11e5 Fix numerous memory leaks and uses of uninitialized variables
These were discovered when running under teh valgrind MemCheck tool. I
have also  checked in a suppressions  file (wsjtx-valgrind.linux.supp)
suitable for use on Linux when running the valgrind MemCheck tool.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-10 15:54:16 +00:00
Bill Somerville
2bb851d164 Correct defect in configuration rig invariant enforcement
The port  type (serial, network, usb,  none) was not tracking  the rig
type.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6703 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-25 23:06:04 +00:00
Bill Somerville
d8350bd35e Fix re-initialization issue in Configuration
Do not use a static scope  variable where a class instance variable is
needed.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6660 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-30 23:24:19 +00:00
Bill Somerville
d9e4d5f25f Improve font handling when resetting configurations and when restarting
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6649 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-26 20:06:36 +00:00
Bill Somerville
1cae0b8aa9 Move temporary directory creation and deletion outside of MainWindow
Changing configuration causes  WSJT-X and JTAlert to get  into a fight
for the temporary directory. By moving the creation and clearup of the
temporary directory outside  of the configurations loop  this issue is
minimized to no worse than before multiple configurations were added.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 21:59:22 +00:00
Bill Somerville
e6c59a42b5 Ensure that WSPR band hopping is disabled when Rig is None
Also added  a new configuration query  method to check if  Rig is None
i.e. a dummy rig.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6629 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 20:22:23 +00:00
Bill Somerville
3b46e140af Disable Internet spotting when rig control is not working
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6628 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 19:33:33 +00:00
Bill Somerville
f7b02f8296 Ensure that rig control split and mode are only changed when allowed
Only when split  operating is not none should split  be touched on the
rig, likewise only  when Settings->Radio->Mode is not  none should the
rig mode be touched.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6597 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-07 18:39:46 +00:00
Bill Somerville
2cfbb15b4f Rig control overhaul to implement generic Doppler shift tracking
The  concept of  a nominal  receive  and transmit  frequency has  been
introduced. This is  used as a base frequency  for Doppler correction,
frequency setting  and reporting. The  start up frequency is  now zero
which is  updated by the first  rig control status report.  This needs
more  work to  accommodate  calling frequency  plus working  frequency
operation as is used for random MS operation etc..

The  main  window  frequency  display  now  shows  the  transmit  dial
frequency while transmitting.

The mode changing logic sequence has been changed such that the rig is
correctly put  into and  taken out  of split mode  as required  by the
target mode.  This also  avoids the "other"  VFO having  its frequency
changed when  entering a mode that  does not use split  operating like
WSPR.

The main window  band combo box edit  may now be used to  input an kHz
offset  from the  current MHz  dial  frequency. This  is intended  for
setting  a sked  or working  frequency on  the VHF  and up  bands. For
example the working frequency for 23cms  might be set to 1296MHz and a
working  frequency of  1296.3MHz would  be selected  by selecting  the
23cms band  with the combo box  drop down list and  then entering 300k
into the band combo box edit widget.

When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such  that the frequency  clicked on  becomes the Tx  and Rx
frequency using  the fixed 1000Hz  DF that  JT4 modes use.   This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF  for both Tx and Rx and therefore
one  can "net"  to an  off frequency,  but visible  on the  waterfall,
caller with one click.

Improvements to OmniRig  rig control including use of  the serial port
control lines RTS or DTR, on the  CAT serial port used by OmniRig, for
PTT control.

Incrementing transaction sequence numbers added to messages to and from
the rig control  thread. This enables round trip status  to be tracked
and associated with a request. For  example a command that might cause
several  asynchronous  status  updates  can  now  be  tracked  in  the
originating thread such  that it is clear which updates  are caused by
executing the  request. This in turn  allows updates to be  held until
the request is complete i.e. the  state is consistent with the results
of the request.

Messages  to the  rig control  thread are  now posted  as a  new state
(Transceiver::TransceiverState) object. The  rig control thread tracks
requests and  actions any differences  between the prior  requests and
the new state.

The rig  control thread is now  stored on the  heap so that it  can be
closed down  and released as needed.  Along with this the  rig control
close  down  semantics  are  better defined  avoiding  some  potential
deadlock situations.

If the rig  is placed into split  mode it will be  reverted to simplex
mode when the rig connection is closed.

When  using direct  rig control  via Hamlib,  rigs that  have A/B  VFO
arrangements and  no method to query  the current VFO like  many Icoms
and  the Yaesu  FT-817/857/897(D)  series now  have smarted  frequency
updating requiring no  VFO changes when changing  the frequency.  This
is particularly  important when doing  Tx Doppler correction  to avoid
glitches.

The implementation  of emulated  split operating  mode ("Fake  It") is
simplified and improved.

A dummy  Hamlib transceiver for PTT  control on a separate  port is no
long instantiated if CAT or VOX PTT control is selected.

The resolution and  any rounding of the rig CAT  frequency set and get
commands is determined automatically  upon opening the rig connection.
This is needed to determine the  rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.

Frequency  calibration is  calculated separately  for the  receive and
transmit frequencies.

Whether  the  rig  modulation  mode  should be  controlled  is  now  a
constructor  argument rather  than  being passed  with individual  rig
control requests.

Doppler  shift  correction  is   considerably  enhanced  with  simpler
controls and much  better rig control.  A new mode  of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via  CAT  when transmitting.   Such  rigs  have a  Doppler  correction
calculated  for the  middle of  the next  transmit period  just before
transmission starts. While  using Doppler tracking it  is now possible
to adjust the  sked frequency either using the new  kHz offset feature
of the main  window band combo box  or by directly tuning  the rig VFO
knob while holding down the CTRL key.

The astronomical data window that includes Doppler tracking control is
now opened  and closed using a  checkable menu item to  avoid it being
accidentally closed.

Debug  configuration  rig  control  diagnostic  messages  now  have  a
facility argument for clearer and more standardized trace messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
Bill Somerville
d864e7f4cb Allow split operating for "None" rig, use for testing only not for release
Setting  the  CMake  option WSJT_RIG_NONE_CAN_SPLIT=ON  will  buold  a
version taht allows split operating with  the dummy rig. This must not
be shipped since it will generate incorrect Tx tones.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6589 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:49 +00:00
Bill Somerville
d63230729b Fix some logic errors in CAT serial port control line settings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:41 +00:00
Joe Taylor
c35c80a4ac Make "group_box6" invisible, for now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6553 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-23 15:48:44 +00:00
Joe Taylor
dfb8dc7422 Add a "Single decode" checkbox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6516 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 15:13:06 +00:00
Joe Taylor
a0318d3a0a Calibration of the "Degrade S/N of .wav file" requires knowledge of receiver bandwidth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-23 19:37:38 +00:00
Joe Taylor
333f8519d3 Attempting to make WSJT-X display messages like "<K1ABC W9XYZ> R26".
[For now, I'll make do with () in place of <>.]


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6418 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-21 21:12:12 +00:00
Bill Somerville
cf5f3916c7 Add facility to reset split mode when closing a rig connection
This option defaults to on but may be unchecked in settings.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-06 17:24:17 +00:00
Bill Somerville
9fc5568e32 Ensure that the temporary directory is usable
Cooperating applications that use file watchers can inadvertently lock
the  temporary  directory which  defers  deletion  of it  when  WSJT-X
exits.  This  is OK  until  WSJT-X  is  restarted  when it  finds  the
directory but  it is  locked for  all access  by the  operating system
since it  is pending deletion.  There is no  way around this  short of
closing the offending application so a message to that effect is given
with a retry option.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6347 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-05 16:43:41 +00:00
Bill Somerville
7cf8e82faf Handle disappearing displays correctly
Qt  makes sure  a widget's  window is  displayed on  a display  if the
display configuration  changes while  it is  running.  If  the display
configuration changes while  the application is not  running then only
QWidget::saveGeometry()  and  QWidget::restoreGeometry()  will  ensure
that  the  widget's window  is  correctly  displayed if  the  original
display is no longer present.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6257 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-10 14:15:43 +00:00
Bill Somerville
9a8560cd84 Initialize degrade saved SNR setting to zero
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6169 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-24 00:11:39 +00:00
Joe Taylor
475118428e Add facility to degrade S/N of data from .wav files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 18:05:36 +00:00
Joe Taylor
c91d47d602 Fix misspelling of new settings name "Sync1Bit".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6163 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-23 14:56:00 +00:00
Steven Franke
befb687ca2 Default is Robust sync OFF
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6154 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 18:03:48 +00:00
Steven Franke
c9ad0c3038 Add robust sync checkbox to Advanced setup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6151 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-22 15:27:14 +00:00
Bill Somerville
19779fa002 Add support for Hamlib USB rig types
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6144 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-21 20:23:30 +00:00
Bill Somerville
1a23757b26 Reintegrate merge from wsjtx_exp branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-18 01:28:12 +00:00
Joe Taylor
a7e2168532 Remove code associated with the unimplemented JT9W mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6061 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-09 17:19:48 +00:00
Bill Somerville
1f26660585 Ensure that v1.6 or later doesn't trash v1.5 settings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-10-21 20:05:02 +00:00
Bill Somerville
f4fdc0c492 Resolve a long standing rig control corner case
This change allows serial control lines  to be forced high or low (DTR
or RTS)  while using the  other (RTS, DTR) for  PTT on the  CAT serial
port. It  is only needed  for some very  obscure and rare  serial line
powered interfaces.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5869 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-09-09 12:16:22 +00:00
Bill Somerville
7ec4d1a109 Qt 5.5 compliance
The  header QMetaType  must now  be  included explicitly  if no  other
header includes QObject.

Adjust band  combo box  layout settings  to ensure  it is  rendered at
minimum content size otherwise it  stretches the signal meter width to
an ugly extent.

Also retired the "frequencies" settings  file key so that upgrades and
downgrades  between  1.5 and  1.6  no  longer require  rebuilding  the
working frequencies list.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-27 18:11:06 +00:00
Bill Somerville
b8e67a5809 Allow DTR line to be forced alongside hardware flow control
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5671 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:32:57 +00:00
Bill Somerville
3dd824ad6b Make the main window more portable and font change capable
The Rx meter  is now a better  Qt citizen and can be  resized. Added a
more obvious peak signal indicator. It  is now a custom widget derived
from QFrame and is now directly added via promotion in Designer.

Added a custom  widget to act as  a letter spin box, this  is used for
sub mode control.  Switched the frequency tolerance widget  to a combo
box with preset  values so that it is more  uniform across systems and
font sizes.

Added container widgets  for group control of various  UI widgets such
as  QSO controls,  DX call  controls and  WSPR controls.  Introduced a
stacked widget to allow the WSPR controls to be swapped in in place of
the "QSO" controls. The "QSO" controls  are are the Rx, Tx and related
controls along with  the main tab widget with the  message buttons and
fields. This means  that the WSPR version of the  main window (and EME
Echo mode) are now much cleaner.

Increased the  size of the  rig control  widget and styled  its colour
using a dynamic property so that it  can be defined in the Designer UI
definition. Reinstated it  as a push button to do  a rig control reset
and retry after an error.

Reset most UI widgets to default properties, particularly removing any
fixed sizes so that they can resize freely when fonts are changed. The
overall layout is now controlled almost exclusively by stretch factors
on some of the rows and columns of the various grid layout managers.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-25 22:41:13 +00:00
Joe Taylor
d69d3b4ca0 User-configurable directory for file azel.dat.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5566 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 17:39:59 +00:00
Bill Somerville
aad2ec6950 Only show WSPR transmitting message when configured to show Tx messages
Also changed  the default for the  "Tx messages to Rx  window" setting
true.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5521 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 11:32:25 +00:00
Bill Somerville
f3930eb5c8 Polish the UI for WSPR and WSPR band hopping
Provide  a  dialog for  band  hopping  scheduling which  replaces  tab
four. Ensure that split mode is  not used for WSPR. Select the correct
tab  for WSPR  operation.  Shift WSPR  band hopping  code  out of  the
MainWindow class.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 01:45:40 +00:00
Bill Somerville
abfcf1cb5b New static data location for read-only data files
Access in CMake via ${WSJT_SHARE_DESTINATION}/${WSJT_DATA_DESTINATION}

Access in wsjtx.exe using Configuration::data_dir()

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5487 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-01 21:47:55 +00:00
Bill Somerville
0d4fd2e018 Fix regression in applying transverter offset
Somehow I  had decided that  the offset  could be determined  from the
frequency coming  from the rig,  this is  of course impossible  so the
code now reverts to saving the  offset used for the last frequency set
and sticks with it until another frequency is set.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-01 19:31:40 +00:00
Bill Somerville
fd06da1432 Improvements to models and delegates
Trying to  find the  sweet spot  for completeness,  usefulness, safety
and,  performance  from  the  various  custom  item  models  and  item
delegates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5474 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 11:51:31 +00:00
Bill Somerville
f200506571 Add mode dependent working frequencies
Working frequencies are mode dependent  and a reset to defaults button
has been added.

Also re-factored much of the model  and item delegate code to simplify
several  of the  model  implementations. Introduced  a single  routine
called from main to register the custom types with Qt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 23:22:17 +00:00
Bill Somerville
34f8924cfc Reintegrate the wsjtx_exp branch into the trunk
This  merge brings  the WSPR  feature development  into the  main line
ready for release in a future v1.6 release.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-27 13:08:28 +00:00
Bill Somerville
0504d2af92 Rig frequency calibration
The   settings   are  a   linear   calibration   correction  for   the
rig. Calibration constants are supplied as an intercept error in Hertz
and a slope error in parts per million.

The correction is  applied only to the final frequencies  going to and
from  the radio.   This means  that  any transverter  offsets are  not
corrected. This is  appropriate as each transverter will  have its own
error factors.  Transvertor and  other individual band specific errors
can only be corrected by adjusting the offset for the band.

Thanks  to Mike  W9MDB for  an  initial implementation  of Joe  K1JT's
suggestion. See also the WSPR documentation for details of calculating
the required calibration constants.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5396 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-19 17:52:47 +00:00
Bill Somerville
2f8b3abb81 Avoid using hostname localhost as some systems don't resolve it
Windows systems  sometimes don't have  localhost defined in  the hosts
file so use the IP address 127.0.0.1 instead.

Merged from the wsjtx-1.5 branch



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5326 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-29 21:58:46 +00:00
Bill Somerville
5ecb26acee Make the runtime docments location work with any CWD
The loaction of the documentation  directory should not be effected by
the current working directory when the application is started.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5324 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-29 15:01:09 +00:00
Bill Somerville
a84b7cdfd3 ------------------------------------------------------------------------
r5297 | bsomervi | 2015-04-26 17:26:54 +0100 (Sun, 26 Apr 2015) | 49 lines

Various defect repairs and ambigous behaviour clarifications

A regression introduced in v1.5.0-rc1 where PTT on an alternate serial
port when using no CAT control is resolved.

A regression introduced  in v1.5.0-rc1 where the  network server field
was not being restored in the settings dialog has been resolved.

In settings the "Test PTT" button is now styled  by checked state.

The  "Test PTT"  button is  enabled without  needing click  "Test CAT"
first when no CAT rig control is selected.

Various parts of the settings dialog  are now disabled when no CAT rig
control is selected. These are the "Mode" group, the "Split Operation"
group and the "Monitor returns to last used frequency" check box. None
of  these have  any  visible impact  nor make  sense  without CAT  rig
control.

Initialization and teardown of rig  control internals has been revised
to avoid several problems related to timing and when switching between
different  CAT  settings. This  includes  improvements  in having  the
operating frequency restored  between sessions when not  using CAT rig
control.

The  initialization   of  OmniRig   connections  has   been  improved,
unfortunately it is  still possible to get an  exception when clicking
the  "Test  CAT" button  where  just  clicking  "OK" and  leaving  the
settings dialog will probably work.

Some unnecessary  CAT commands output  during direct rig  control have
been elided to reduce the level of traffic a little.

The handling of  some automatically generated free  text messages used
when the station is a type 2  compound callsign or is working a type 2
compound callsign has  been improved. This is related to  how a double
click  on  a  message  of  the   form  "DE  TI4/N0URE  73"  is  double
clicked. The  new behaviour depends  on whether the current  "DX Call"
matches the  call in the message.   This resolves the ambiguity  as to
whether this message  is a sign off  at the end of a  QSO with current
operator (a 73  message is generated) or a tail  end opportunity where
the message should be treated the same  as a CQ or QRZ message (WSJT-X
QSYs  to the  frequency, generates  messages and  selects message  one
ready to call).  This still  leaves some potential ambiguous behaviors
in  this complex  area but  selecting "Clear  DX call  and grid  after
logging" should resolve most of them.

Rig  control trace  messages have  been cleaned  up and  are now  more
helpful, less verbose and, tidier in the source code.
------------------------------------------------------------------------

Merged from the wsjtx-1.5 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5298 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-26 16:41:12 +00:00
Bill Somerville
a51c5c4251 Reintegrate Joe's experimental VHF & up features
As at ^/branches/wsjtx_exp@5271



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-22 17:48:03 +00:00
Bill Somerville
3f75b4144a Send status information to UDP server
To  facilitate interaction  with other  applications WSJT-X  now sends
status  updates  to  a  predefined   UDP  server  or  multicast  group
address. The  status updates include the  information currently posted
to  the  decodes.txt and  wsjtx_status.txt  files.   An optional  back
communications  channel is  also implemented  allowing the  UDP server
application to control some basic actions in WSJT-X.

A reference implementaion of a typical UDP server written in C++ using
Qt is  provided to demonstrate  these facilities. This  application is
not intended  as a user  tool but  only as an  example of how  a third
party application may interact with WSJT-X.

The  UDP messages  Use QDataStream  based serialization.  Messages are
documented in  NetworkMessage.hpp along with some  helper classes that
simplify the building and decoding of messages.

Two  message  handling  classes   are  introduced,  MessageClient  and
MessageServer.  WSJT-X uses the MessageClient class to manage outgoing
and  incoming  UDP  messages   that  allow  communication  with  other
applications.   The MessageServer  class implements  the kind  of code
that a  potential cooperating  application might use.   Although these
classes  use  Qt serialization  facilities,  the  message formats  are
easily  read and  written  by  applications that  do  not  use the  Qt
framework.

MessageAggregator   is   a   demonstration   application   that   uses
MessageServer and  presents a GUI  that displays messages from  one or
more  WSJT-X instances  and  allows sending  back a  CQ  or QRZ  reply
invocation  by double  clicking  a decode.   This  application is  not
intended as  a user facing tool  but rather as a  demonstration of the
WSJT-X UDP messaging facility. It  also demonstrates being a multicast
UDP server by allowing multiple instances to run concurrently. This is
enabled by using an appropriate  multicast group address as the server
address.  Cooperating   applications  need  not   implement  multicast
techniques but  it is recomended  otherwise only a  single appliaction
can act as a broadcast message (from WSJT-X) recipient.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 16:40:49 +00:00
Bill Somerville
a5642a4807 Improved DTR and RTS line control
Made  the  force control  lines  group  box  in the  Configuration  UI
checkable which allows the DTR and RTS checkboxes to mean either force
low or force high.

Also  improved   UI  control  logic   to  only  allow   valid  setting
combintions.  Disabled network  port  text edit  for OmniRig.  Cleared
network port combo box list for  network interfaces like HRD and DXLab
Commander, was erroneously showing COM ports.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5222 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-14 10:54:14 +00:00
Bill Somerville
fe70882ef2 Remove unneeded debug message
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5180 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-07 13:12:23 +00:00
Bill Somerville
ed2f4ee226 Fix font setting
Several issues  mainly related  to the  rather complex  interaction of
style sheets and widget properties with respect to fonts.

Font setting  on the  astro window  should now  be consistent  and not
overridden by application style sheet driven font settings.

Decoded text font setting should now be consistent and not revert back
to Courier 10 on the next decode after a font change.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5179 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-07 12:08:55 +00:00
Bill Somerville
177aaef501 Fix another issue with station details not being saved
Due to  what appears to be  a Qt bug, any  in progress user edit  to a
table  fields is  not  updated  in the  underlying  data models  until
QDialog::accept() is  called, this means that  model validation before
calling QDialog::accept() is tricky.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5164 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-06 13:25:51 +00:00
Bill Somerville
f7b0d3904a Ensure all model proxy caches are flushed before access
This fixes a defect where station detail changes are not saved.

The Qt sort and filter proxy models utilize an item cache that must be
flushed by  callig submit() before  accessing the underlying  model if
the proxy model has been used for updates.

Also  separated  the   item  model  candidate  key   filter  from  the
implementation  internals of  the foreign  key item  delegate so  that
candidate key filtered models can be used directly as view models.

Make the insert new station details band combo box use a candidate key
filtered item model to avoid constraint violations. Constraint is zero
or one station records per band.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5161 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-06 01:57:47 +00:00
Bill Somerville
a7a60412c5 Do not package kvasd.dat
This file is created  at run time and is not  needed in the deployment
package.   Also  removed   from  source   control  to   avoid  further
misunderstandings.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-01 23:04:09 +00:00
Bill Somerville
21bf2b6b31 Better handling of compound callsigns
Option  to control  standard message  generation for  type 2  compound
callsign holders.

Process decoded  messages based  on either base  or full  callsign for
both DE and DX callsigns.

Change CW id when callsign changed in settings.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5000 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-04 12:22:33 +00:00
Bill Somerville
a249ce4c29 Add option for returning to last monitored frequency on monitor enable
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-27 18:59:08 +00:00
Bill Somerville
a37e07bdd0 Don't use QSerialPortInfo::isBusy() to filter available ports
The above  member opens the  port and  that twiddles DTR/RTS  which is
unhelpful if they are connected to  PTT. Instead a primitive port name
filter  to try  and  detect unuseable  ends of  serial  port pairs  is
employed. This may  need further tests to exclude  similar devices yet
to be discovered.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-27 17:37:37 +00:00
Bill Somerville
c718bfd2fd Use full device path for serial port names
Except  on Windows  where  the  obscure \\.\  device  root is  removed
because Windows users will not be used to it.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4978 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-19 15:18:47 +00:00
Bill Somerville
1453ed6f35 Populate serial port lists with available actual devices
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4976 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-19 12:26:36 +00:00
Bill Somerville
127c633a97 Bring colour settings into line with general configuration strategy
Colours behave  like other  configuration items  and changes  are only
applied when the Settings UI is dismissed via the "OK" button.

Simplified font settings and use  style sheets consistently to set the
application and decoded  text fonts. This is necessary  because any UI
widget that  has a style  sheet applied does not  honor a font  set by
QWidget::setFont()  even if  there is  no  font setting  in the  style
sheet, this is broken behaviour IMHO  but that is the way Qt currently
works.

Use a  style sheet to style  the frequency display and  clock. This is
necessary to  allow fonts to  be cascaded through parent  style sheets
and still be overridden on these widgets.

Simplify  the decoded  text  widgets,  there is  no  need  to use  the
QTextBrowser  as a  super class  since  the simpler  QTextEdit set  as
read-only is sufficient. Also removed  colour setting via a background
brush  as it  doesn't  work  and the  HTML  'bgcolor' attribute  works
correctly.

Change  to  UI  properties  of  the  decoded  text  widgets  to  allow
horizontal scrolling if required, this  allows larger fonts to be used
without truncating decoded messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 08:53:02 +00:00
Bill Somerville
6780563a07 Added commentary to the Configuration module
Description and instructions to help those adding or amending settings
values.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4952 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-11 11:57:40 +00:00
Joe Taylor
a93e55fef0 Improved, simplified sort routine; faster and better "flatten"
procedure; better window functions for some FFTs, resulting in
better decoder performance; User-selectable colors for backgrounds
of decoded messages.  NB: more testing is desirable!



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4951 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-11 00:50:35 +00:00
Bill Somerville
6a6e56b712 Set split mode before and after setting Tx frequency
Also cleaned up duplicate trace output.

Using the  DX Lab  Suite Commander  CAT interface  with rigs  like the
TS-2000  requires  that  split  mode  be set  after  changing  the  Tx
frequency. This  is because  setting teh  Tx frequency  disables split
mode.

With some Icom rigs  the rig must be in split  mode before setting the
Tx frequency otherwise the Tx frequency change will not be honoured.

To fix  this the sequence set-split,  set-tx-frequency, set-split must
always be used to change the Tx frequency.

Support for new DX Lab Suite Commander TCP/IP commands

Dave AA6YQ has added two new commands to the Commander server to allow
more reliable control.

Requires DX Lab Suite Commander 11.1.4 or later.

Ensure split Tx frequency agrees with UI before transmitting

Ensure split works on Yaesu via Hamlib without breaking others

Also improved class HamlibTransceiver debug trace messages.

Merged r4776-r4779 from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-06 20:23:29 +00:00
Bill Somerville
f37ed4cd78 Take advantage of the new KVASD v1.12
Pass the  temporary directory to  jt9 and use  it to give  the correct
paths  to  temporary files.  Also  jt9  passes  the absolute  path  to
kvasd.dat in the temporary directory to kvasd.

Clear out all the annoying cruft that has accumulated due to having to
run with $CWD as the temporary directory.

Use QStandardPaths  to find the  writable data directory  where needed
rather than passing it around  between objects. This now works because
the $CWD hasn't been changed.

Do away with the CMake option WSJT_STANDARD_FILE_LOCATIONS as it is no
longer needed.

Fix astro status file azel.dat formatting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-03 00:06:54 +00:00
Bill Somerville
1cf6756138 OmniRig interface fixes
Split mode  was inadvertently disabled  in a prior change  to disallow
split mode on the "None" rig.

Allow OmniRig to report a rig offline  status for up to 5s since short
periods of "rig  not responding" seem to happen regularly  for no good
reason.

Use  high level  OmniRig SetSimplexMode()/SetSplitMode()  functions to
initialize rig.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4578 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-01 22:34:44 +00:00
Bill Somerville
8d3c86c399 Disallow multiple instances without a unique rig name
Because of confilicts using the  shared memory to communicate with jt9
only one instance of WSJT-X may run with each unique key (rig name).

Added a QLockFile for each unique  key in the temp directory and logic
to deal with stale locks and retries.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-03 16:07:43 +00:00
Bill Somerville
cb93d8f3d1 Moving WSJT-X "trunk" on to v1.5.
If built with  qmake the version string will now  be "Not for Release"
since some  many features essential  to making a complete  package are
currently only build when using CMake.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4372 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 19:17:19 +00:00
Bill Somerville
d207d3f3d5 Fix local user manual on Mac.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4367 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 16:12:03 +00:00
Bill Somerville
e2c8634f54 Get local user manual working on Linux systems.
The  location  of  documentation   files  on  Linux  distributions  is
controlled  to a  certain extent.  Using the  QStandardPaths::locate()
method helps us with this.

Work round the  misbehaviour of QCoreApplication::applicationDirPath()
when  the  CWD has  been  changed  by  working out  the  documentation
location before changing  the CWD to a temporary  directory. This path
is now provided by the Configuration settings class which also manages
other run time paths.

Updated  Debian packaging  to move  a little  nearer a  conforming DEB
file.

Added a basic manpage for rigctld-wsjtx.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4364 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 14:45:36 +00:00
Bill Somerville
248f78d780 Add validation to message entry fields.
All message  entry fields on the  mainscreen and in the  macro editing
facilities are now restricted to valid characters in the JT65/JT9 free
text message alphabet.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4362 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 11:36:01 +00:00
Bill Somerville
6d570cda87 Ensure Plus 2kHz Check Box is disabled in Transmit when required.
The Plus 2 kHz check box should  not be enabled during transmit if the
"Allow Tx Frequency Changes While Transmitting" is not checked.

Also fixed a  defect that caused the disabled during  Tx state of some
widgets to not clear due to transmit or tune period being shorter than
a poll interval.   Fixed by ensuring PTT changes  are always signalled
rather than waiting for the next poll.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4352 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:55 +00:00
Bill Somerville
4a32b0bef6 Add facility to disallow CAT commands while transmitting.
Some rigs either do not honour some CAT commands while transmitting or
interpret them  incorrectly. To  deal with this  a settings  option to
allow TX  frequency changes while  transmitting has been added  with a
default value of off.

Any UI actions that directly or indirectly change the TX frequency are
guarded according to this new option. As well as this band changes and
use of  the +2kHz check box  are disabled and guarded  respectively in
transmit mode.

Mode changes via the menu are now disabled while transmitting.

When TX frequency changes are allowed; frequency changes are correctly
implemented while in tune mode.

Double clicking  decodes while  transmitting now  correctly regenerate
and change the message sent on the fly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:19 +00:00
Bill Somerville
a4c04b6de6 Apply frequency offset to TX frequency.
The frequency offset (transverter offset) was not being applied to the
setting of a split TX frequency.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4348 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:24:52 +00:00
Bill Somerville
c58ee3b909 Generate a file with HRD interface information.
To aid rapid  diagnosis of missing HRD support in  WSJT-X for untested
rigs the HRD  interface now writes a text file  with the available HRD
facilities for the  rig to the data directory.  The  intent is to have
users experiencing  problems interfacing  untested rigs to  sub,it the
file to us  (the developers) for analysis and updating  the regexps in
teh HRD interface to support their rig in the next release.

The text file is called "HRD Interface Information.txt".

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4330 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-17 15:17:32 +00:00
Bill Somerville
fcba07b6cc Fix defect with initial split mode setting.
Split mode  was not being enabled  when enabling monitor mode  for the
first time if the rig split VFO was already at the required frequency.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4269 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-08 10:56:27 +00:00
Bill Somerville
f743b5b043 Fix persistence of CAT serial/network port.
Enhanced the  logic for saving  and restoring to/from settings  of the
shared configuration field for CAT serial port and CAT network port so
that  old  values are  not  discarded  and  new values  are  correctly
recovered on restart.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4245 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-04 09:59:27 +00:00
Bill Somerville
735119b5de Do not overwrite CAT/network port name after reading settings.
The CAT/network port name was being overwritten with the CAT port name
during startup so  if the port was  a network device it  was not being
persistent across restarts.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4243 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-03 21:59:04 +00:00
Bill Somerville
fbf58ae3f3 Make temp directory unique in test mode.
The Qt  test mode  that uses  special paths  for writeable  files (via
QtStandardPaths)  doesn't make  a special  temporary file  path.  This
change appends " - test_mode" to the WSJT-X unique temporary file path
so that an application run in test mode will not interact with another
running in normal mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4240 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-01 15:55:59 +00:00
Bill Somerville
550eb7e8a8 TXAudioSource was not being saved as an enum in settings.
The TXAudioSource  was being saved as  a boolean value instead  of the
enumeration value.  This caused the  read back from settings  logic to
fail silently.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4220 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-25 22:13:52 +00:00
Bill Somerville
d45787f59a Audio source (mic/data) was not being persisted correctly in settings.
An old settings key was lurking in the Configuration code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4218 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-25 17:12:37 +00:00
Joe Taylor
8b92cbb287 Replace the ellipses (...) on certain control labels.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4213 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-24 12:31:19 +00:00
Joe Taylor
1efa6e063e Minor tweaks to GUI appearance, etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4210 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-23 17:16:35 +00:00
Bill Somerville
e0e67f0a6a Added CMake option to control experimental features.
Sometimes parts of the application are  not fully ready for release at
release  time.   This  option  allows  such  features  to  be  enabled
conditionally at configure time.

The CMake option WSJT_ENABLE_EXPERIMENTAL_FEATURES  is used to control
this ability.  Normally  you will not need to change  it as it behaves
in a reasonable  way.  The option is ON in  debug build configurations
and OFF in non-debug configuratiuons.

The  option  is   made  available  in  all  source   modules  via  the
WSJT_ENABLE_EXPERIMENTAL_FEATURES macro  which is defined to  1 if the
option is ON and to 0 if it is OFF.

Since this  default behavior is  potentially dangerous because  it can
mean that release builds contain different code from debug builds; the
option may  be set to  OFF in debug  configurations in the  normal way
(cmake-gui,  edit  CMakeCache.txt, etc.)   to  achieve  a debug  build
similar to a default release build.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-06-19 16:47:49 +00:00
Bill Somerville
2e8c4c4ec0 Improved free text macro functionality.
The macro edit  page in the settings dialog  now allows multiple items
to be selected in an extended selection.

The macro items can be rearranged  by drag and drop of single items or
whole selections.

The  delete button  and  context menu  item  will now  delete all  the
selected items.

The  free text  macro drop  down combo  boxes on  the main  screen now
automatically insert new  macros into the macros list  (at the end) if
the ENTER key is pressed while the combobox has focus.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4038 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-16 23:10:45 +00:00
Bill Somerville
8ac8a5ecdd Disallow split mode working with dummy rig.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-07 23:40:32 +00:00
Bill Somerville
f076c37c19 Made the soft keying CW wave shaper a CMake option (off by
default).

Reorganized Modulator interface so that it can control the stream
it writes to.

Make sure only QAudioOutput::stop is called at the end of sending
rather than QAudioOutput::reset which discards pending samples.

Added a quick close option to the Modulator::stop slot to discard
pending buffers if required.

Fix issue in CW synthesizer that was causing CW to be inverted
occasionally.

Made global arrays of symbols volatile because compiler waa
optimizing away reads in sound thread. These global variables
must go eventually as they are a multi-threading hazard.

Simplified TX sequencing to remove some duplicate signals.

Increased range of TX attenuator from 10dB to 30dB. This is mainly for
non-Windows platforms where the attenuator isn't linearized correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3985 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-06 21:58:11 +00:00
Bill Somerville
2b966c14d1 Igonored CAT polls of RX frequency from Commander when transmitting as
they are unreliable on Icom radios.

Simplified diagnostic output for HRD CAT interface and DX Labs Suite
Commander CAT interface.

Removed duplicate diagnostic message from configuration CAT control.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3983 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-04 17:02:18 +00:00
Bill Somerville
4453a46664 Don't overwrite frequency, station or, macro models whenleaving the
configuration dialog unless they have changed.

Fix a bug I had introduced into the free text message fields so they
don't get overwritten by message generation.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 21:19:04 +00:00
Bill Somerville
9247e10115 Added support for use of "Standard" locations for writable files.
This allows  writable files  to be  located in  the "correct"
         location for  each platform rather  than in the  directory of
         the  executable  which, in  general,  is  not recommended  or
         allowed in some cases.

         A preprocessor macro  WSJT_STANDARD_FILE_LOCATIONS is used to
         switch be tween old and new functionality, currently it is on
         by default.  It  can be turned off by defining  it to a false
         value (0)  or more simply  with cmake-gui setting  the option
         with  the same  name.  JTAlert  can  only work  with the  old
         non-standard file  locations until  Laurie VK3AMA  chooses to
         support the new file locations.

         Even  if the  above is  not  enabled; the  QSettings file  is
         written to a  user specific location so it will  be shared by
         all instances  of the  program (i.e.  across  upgrades).  See
         below for multiple concurrent instance support changes.

Added a command line parser module for Fortran.

         Added 'lib/options.f90'  to facilitate more  complex argument
         passing to jt9 to cover explicit file locations.

Changed the way multiple concurrent instances are handled.

         This is  to allow the program  to be run multiple  times from
         the same installation directory.

         A new wsjtx command line  optional argument is available "-r"
         or  "--rig"   which  enables  multiple   concurrent  instance
         support.  The  parameter of the  new option is a  unique name
         signifying  a rig  or equivalent.   The name  is used  as the
         shared memory segment key and  in window titles.  The name is
         also used to  access unique settings files  and writable data
         files like ALL.TXT  and log files.  No attempt  has been made
         to share these files between concurrent instances.

         If  "-r" or  "--rig" is  used  without a  parameter it  still
         enables  multiple   concurrent  instance  support   for  that
         instance.  All instances must use  a unique parameter, one of
         which may be empty.

         The        rig       name        is       appended        the
         QCoreApplication::applicationName() for convenient usage like
         window titles.

Set non Qt locale to "C".

         This ensures that C library functions give consistent results
         whatever the  system locale is set  to.  QApplication follows
         the system locale as before.  Thus using QApplication and its
         descendants  like widgets  and QString  for all  user visible
         formating will give correct l10n and using C/C++ library will
         give consistent formatting across locales.

Added top level C++ exception handling to main.cpp.

         Because  the   new  transceiver  framework   uses  exceptions
         internally, the main function now handles any exceptions that
         aren't caught.

Retired devsetup, replaced with Configuration.

         Configuration  is  a  class  that encapsulates  most  of  the
         configuration  behavior.   Because  rig configuration  is  so
         closely coupled with rig operation, Configuration serves as a
         proxy  for   access  to  the  rig   control  functions.   See
         Configuration.hpp  for  more  details  of  the  Configuration
         interface.

Menu changes.

         Various checkable  menu actions moved  from main menu  to the
         Configuration  dialog.   The  whole settings  menu  has  been
         retired with  the single  "Settings..."  action moved  to the
         file  menu  for  consistency  on  Mac  where  it  appears  as
         "Preferences" in line with Mac guidelines.

New data models for data used by the application.

         ADIF amateur band parameters,  free text message macros, spot
         working   frequencies  and,   station  information   (station
         descriptions and transverter offsets per band) each implement
         the  QAbstractItemModel interface  allowing them  to be  used
         directly with  Qt view widgets  (Bands.hpp, FrequencyList.hpp
         and, StationList.hpp).  Configuration  manages maintenance of
         an instance of  all but the former of the  above models.  The
         ADIF band  model is  owned by  Configuration but  requires no
         user maintenance as it is immutable.

Band combo box gets more functionality.

         This  widget is  now an  editable QComboBox  with some  extra
         input capabilities.

         The popup list is still the list of spot working frequencies,
         now  showing the  actual  frequency decorated  with the  band
         name.  This  allows multiple  spot frequencies  on a  band if
         required.

         The  line edit  allows direct  frequency entry  in mega-Hertz
         with  a completer  built  in to  suggest  the available  spot
         working frequencies.   It also  allows band name  entry where
         the  first  available  spot working  frequency  is  selected.
         Recognized band names are those  that are defined by the ADIF
         specification and  can be found  in in the  implementation of
         the ADIF bands model (Bands.cpp).

         If an out of band frequency  is chosen, the line edit shows a
         warning red  background and the  text "OOB".  Out of  band is
         only defined  by the  ADIF band limits  which in  general are
         wider than any entities regulations.

Qt 5.2 now supports default audio i/p and o/p devices.

         These devices are placeholders  for whatever the user defines
         as the  default device.   Because of  this they  need special
         treatment as  the actual device  used is chosen at  open time
         behind the scenes.

Close-down behavior is simplified.

         The close-down  semantics were broken such  that some objects
         were not being shut down cleanly, this required amendments to
         facilitate correct close down of threads.

User font selection added to Configuration UI.

         Buttons to set the application font and the font for the band
         and  Rx frequency  activity widgets  have been  added to  the
         Configuration UI to replace the file based font size control.

Free text macros now selected directly.

         The free text line edit  widgets are now editable combo boxes
         that have  the current free  text macro definitions  as their
         popup  list.   The old  context  menu  to  do this  has  been
         retired.

Astronomical data window dynamically formatted and has font a chooser.

         This window is now autonomous,  has its own font chooser and,
         dynamically resizes to cover the contents.

Double click to Tx enabled now has its own widget in the status bar.

QDir used for portable path and file name handling throughout.

The  "Monitor", "Decode",  "Enable  Tx" and,  "Tune"  buttons are  now
checkable.

         Being checkable allows these  buttons control their own state
         and rendering.

Calls to PSK Reporter interface simplified.

         In   mainwindow.cpp  the   calls   to   this  interface   are
         rationalized to just 3 locations.

Manipulation of ALL.TXT simplified.

         Moved, where possible, to common functions.

Elevated frequency types to be Qt types.

         Frequency  and FrequencyDelta  defined as  Qt types  in their
         meta-type system  (Radio.hpp).  They  are integral  types for
         maximum accuracy.

Re-factored rig control calls in mainwindow.cpp.

         The new  Configuration proxy  access to rig  control required
         many changes  (mostly simplifications) to the  MainWindow rig
         control code.  Some  common code has been  gathered in member
         functions   like   qsy(),   monitor(),   band_changed()   and
         auto_tx_mode().

Rig control enhancements.

         The  rig control  for  clients interface  is  declared as  an
         abstract    interface   (See    Transceiver.hpp).    Concrete
         implementations of this interface are provided for the Hamlib
         rig  control library,  DX Lab  Suite Commander  via a  TCP/IP
         command channel, Ham  Radio Deluxe also via  a TCP/IP command
         channel and, OmniRig via its Windows COM server interface.

         Concrete Transceiver implementations are expected to be moved
         to a separate thread after construction since many operations
         are blocking  and not suitable  for running in a  GUI thread.
         To facilitate this all  instantiation of concrete Transceiver
         instances are handled by  Configuration using a factory class
         (TransceiverFactory)   for   configuration  parameter   based
         instantiation.

         Various   common  functionality   shared  by   different  rig
         interface implementations  are factored out into  helper base
         classes that  implement or delegate parts  of the Transceiver
         interface.  They  are TransceiverBase  which caches  state to
         minimize expensive rig commands, it also maps the Transceiver
         interface  into a  more  convenient  form for  implementation
         (template methods).  PollingTransceiver that provides a state
         polling   mechanism  that   only   reports  actual   changes.
         EmulateSplitTransceiver  that  provides  split  operation  by
         QSYing on PTT state changes.

         EmulateSplitTransceiver can  be used with  any implementation
         as  it follows  the GoF  Decorator pattern  and can  wrap any
         Transceiver implementation.

         OmniRigTransceiver is  derived directly  from TransceiverBase
         since  it doesn't  require  polling due  to its  asynchronous
         nature.  OmniRigTransceiver is only built on Windows as it is
         a COM server client.  To build  it you must first install the
         OmniRig     client     on     the     development     machine
         (http://www.dxatlas.com/omnirig/).

         DXLabSuiteCommanderTransceiver          derives          from
         PollingTransceiver since  it is a  synchronous communications
         channel.   No  third  party  library  is  required  for  this
         interface.

         HRDTransceiver also derives from PollingTransceiver.  The HRD
         interface  library has  been  reverse  engineered to  provide
         functionality with  all available versions of  HRD.  No third
         party libraries are required.

         HamlibTransceiver  likewise  derives from  PollingTransceiver
         since  the Hamlib  asynchronous interface  is non-functional.
         Although this  class will interface with  the release version
         of Hamlib (1.2.15.3);  for correct operation on  most rigs it
         needs to  run with the  latest master branch code  of Hamlib.
         During development many changes to Hamlib have been submitted
         and accepted,  hence this requirement.  Hamlib  source can be
         obtained from git://git.code.sf.net/p/hamlib/code  and at the
         time of writing he master branch was at SHA 6e4432.

         The Hamlib interface directly calls the "C" interface and the
         modified rigclass.{h,cpp} files have been retired.

         There is a rig type selection of "None" which may be used for
         non-CAT  rigs, this  is actually  a connection  to the  dummy
         Hamlib device.

         PollingTransvceiver   derives    from   TransceiverBase   and
         TransceiverBase derives from the Transceiver interface.

         Each interface implementation offers  some possibility of PTT
         control via  a different serial  port than the CAT  port.  We
         also support PTT  control directly via a  second serial port.
         This is done  by delegating to a dummy  Hamlib instance which
         is   only   used   for   PTT  control.    This   means   that
         DXLabSuiteCommanderTransceiver,       HRDTransceiver      and
         OmniRigTransceiver  always  wrap  a  dummy  HamlibTransceiver
         instance.  The  factory class TransceiverFactory  manages all
         these constructional complexities.

         Serial port  selection combo  boxes are  now editable  with a
         manually  entered value  being  saved to  the settings  file.
         This allows  a non-standard  port device  to be  used without
         having to edit the settings file manually.

         For TCP/IP  network CAT  interfaces; the network  address and
         port  may  be specified  allowing  the  target device  to  be
         located on a different machine  from the one running wsjtx if
         required.  The  default used when  the address field  is left
         blank is the correct one for normal usage on the local host.

         Selecting a polling  interval of zero is  no longer possible,
         this  is because  the rig  control capability  can no  longer
         support one way connection.  This  is in line with most other
         CAT control software.

         In the Configuration dialog there are options to select split
         mode  control  by  the  software  and  mode  control  by  the
         software.  For  the former  "None", "Rig"  and "Fake  it" are
         available,  for  the latter  "None",  "USB"  and, "Data"  are
         available.  Because  tone generation is implicitly  linked to
         split mode  operation; it is  no longer possible to  have the
         software in split  mode and the rig not or  vice versa.  This
         may mean some rigs cannot be used in split mode and therefore
         not in dual JT65+JT9 until  issues with CAT control with that
         rig are  resolved.  Single  mode with VOX  keying and  no CAT
         control are still possible so even the most basic transceiver
         setup is supported as before.

         Configuration now  supports a  frequency offset  suitable for
         transverter   operation.     The   station    details   model
         (StationList.hpp) includes  a column  to store an  offset for
         each band if required.

CMake build script improvements.

         The CMakeLists.txt from the  'lib' directory has been retired
         with its  contents merged into the  top level CMakeLists.txt.
         Install  target support  has been  greatly improved  with the
         Release build  configuration now building a  fully standalone
         installation  on Mac  and Windows.   The Debug  configuration
         still   builds   an   installation   that   has   environment
         dependencies for  external libraries, which is  desirable for
         testing and debugging.

         Package target  support is largely complete  for Mac, Windows
         and, Linux, it should be possible to build release installers
         directly from CMake/CPack.

         Cmake FindXXXX.cmake  modules have been added  to improve the
         location of fftw-3 and Hamlib packages.

         Version numbers are now stored in Versions.cmake and work in
         concert with automatic svn revision lookup during build.  The
         version string becomes 'rlocal'± if there are any uncommitted
         changes in the build source tree.

Moved resource like files to Qt resources.

      	 Because location of resource files  (when they cannot go into
      	 the  installation directory  because of  packaging rules)  is
      	 hard to standardize.  I have used the Qt  resource system for
      	 all ancillary data files. Some  like kvasd.dat are dumped out
      	 to the temp (working directory)  because they are accessed by
      	 an external program, others like the audio samples are copied
      	 out so  they appear in  the data directory under  the default
      	 save directory.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00