Commit Graph

2016 Commits

Author SHA1 Message Date
Joe Taylor
8e7a56634b Set nearly=41; don't write <DecodeFinished> after the early decode pass. 2020-02-28 15:03:39 -05:00
Joe Taylor
f9322f2b43 Add calls to timer() around calls to subtractft8(). 2020-02-28 11:25:32 -05:00
Steven Franke
877878ea88 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-02-27 09:10:27 -06:00
Steven Franke
403904089e Re-arrange the fields in the ALL_WSPR.TXT file. 2020-02-27 09:10:17 -06:00
Joe Taylor
b9888a09ff Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-02-26 13:16:12 -05:00
Joe Taylor
00210d1141 Minor code cleanup in subtractft9.f90. 2020-02-26 13:14:49 -05:00
Steven Franke
1dde5fdd6c Fix a minor bug in the unpk_ routine that was introduced in the last commit. 2020-02-25 15:28:57 -06:00
Steven Franke
38bac5e335 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-02-25 10:56:22 -06:00
Steven Franke
0ca6cbb575 wsprd: improve decoding and reduce the number of false decodes
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
2020-02-25 10:48:38 -06:00
Joe Taylor
65fda32a05 Previous commit was in error. This is the best-performing subtractft8.f90. 2020-02-25 09:04:18 -05:00
Joe Taylor
ff46c5a0c4 In subtractft8.f90: refine DT for early decodes before subtracting them from dd(). 2020-02-24 16:18:42 -05:00
Joe Taylor
1d159a18c7 More cleanup to satisfy fussy gcc 10 compiler. 2020-02-21 13:36:49 -05:00
Joe Taylor
adb7dfcac3 Satisfy fussy compilers like gcc 10: Type mismatch between actual argument at (1) and actual argument at (2) 2020-02-21 09:52:20 -05:00
Steven Franke
ac1d0f837d Comment out diagnostic write statement. 2020-02-17 10:56:47 -06:00
Steven Franke
20b942b802 FT8: Add an experimental 4'th bit metric. Make dupe removal unconditional. 2020-02-17 10:53:52 -06:00
K9AN
207fd05f9f Minor simplification - remove unnecessary nint() functions in get_spectrum_baseline.f90 2020-02-14 16:54:56 -06:00
Joe Taylor
ecb09ba852 Revert "Send "<DecodeFinished>" for FT8 only after the full-length decoding pass."
This reverts commit 364db768db.
2020-02-14 17:44:46 -05:00
Steven Franke
09b47b0e8e Change lower limit of analysis window from 200 Hz to 100 Hz. 2020-02-14 15:28:16 -06:00
Joe Taylor
364db768db Send "<DecodeFinished>" for FT8 only after the full-length decoding pass. 2020-02-14 11:49:07 -05:00
Joe Taylor
e25696f4e3 Enable early+normal decoding for FT8 data read from disk, within WSJT-X. 2020-02-14 11:16:54 -05:00
Joe Taylor
cf6ee661ab Fix two bugs (thanks Steve!); add early-decode logic to jt9[.exe] from command line. 2020-02-14 10:15:37 -05:00
Joe Taylor
2823cc3e85 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-02-13 15:34:09 -05:00
Steven Franke
e936a863a8 Fix some bugs related to osd decoding in msk144 and disable it for now. 2020-02-13 14:25:36 -06:00
Joe Taylor
4a4864d2ae FT8 early decoding is now working. 2020-02-13 15:05:37 -05:00
Steven Franke
08baa50a01 Experimental change to enable OSD decoding for MSK144 when ntol .le. 50 Hz 2020-02-13 08:48:51 -06:00
Steven Franke
cf07d478ac Some repairs and tweaks to development-related programs in fsk4hf directory. 2020-02-09 16:13:52 -06:00
Steven Franke
e9160f3c2f Make ldpcsim174_91 work again. Scale SNR2500 assuming coherent BPSK, same Eb as FT8. 2020-02-08 14:49:21 -06:00
Steven Franke
ff109a60ca Implement AP decoding for Hounds when Fox has a compound call with standard base call. 2020-02-03 10:48:51 -06:00
Steven Franke
96ad947a37 Implement decode quality metric for FT4. 2020-01-27 09:55:34 -06:00
Steven Franke
70b84478f0 Add WW_DIGI to the special activities section. Make necessary changes to
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
2020-01-24 11:26:36 -06:00
Steven Franke
9aaffb9252 For FT4 - enable ndeep=4 within 80 Hz of nfqso. 2020-01-11 15:22:48 -06:00
Steven Franke
87b2bd74e2 More work on AP decoding for RU/SCC contests. 2020-01-09 11:44:58 -06:00
Steven Franke
a63e6e1209 - Force the use of standardized CQ modifier for FT4/FT8 contest operation.
- Pass CQ modifier string to the ft4 decoder.
2020-01-08 08:41:47 -06:00
Steven Franke
52075fca24 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-01-03 14:29:12 -06:00
Steven Franke
dda393dd81 Fix a typo. Thanks NQ6Z! 2020-01-03 14:28:37 -06:00
Joe Taylor
f069477dbb Bring test28.f90, ft4_testmsg.f90, ft8_testmsg.f90, ft8code.f90 up to date. 2020-01-03 13:34:56 -05:00
Joe Taylor
3cb75a49ec Reorder the FT4 test messages used in ft4code.f90. 2019-12-18 12:14:34 -05:00
Joe Taylor
26d1996eb8 Tweaks to ft4code. 2019-12-18 10:42:08 -05:00
Joe Taylor
3397bf49b4 Add utility program ft4code. 2019-12-18 10:02:00 -05:00
Joe Taylor
7d8cdd200c Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2019-12-11 16:34:34 -05:00
Joe Taylor
7c0bef98bc Update and correct some comments. No actual code changes! 2019-12-11 16:33:33 -05:00
Steve Franke
0f592eb48f Disallow decoded messages with i3.ge.6 as these are not yet defined. 2019-12-11 11:18:37 -06:00
Steve Franke
85b5967d99 Fix ncontest initialization and heap storage conflict. 2019-12-11 10:16:48 -06:00
Joe Taylor
794736043c Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2019-12-04 15:45:36 -05:00
Joe Taylor
61e8cb65d4 Update allsim.f90 and addit.f90 for the new FT8 and FT4 waveforms. 2019-12-04 15:44:38 -05:00
Steve Franke
a0d471cb0b Improve FT8 SNR estimates in two ways:
(i) SNR no longer saturates at +20 dB
(ii) a large signal in the passband no longer causes the
SNR of weaker signals to be biased low.
2019-11-27 15:58:52 -06:00
Steve Franke
091b7f03ed Delete un-needed file. 2019-11-27 15:57:40 -06:00
Steve Franke
d1530b0c19 Rename ft8sim files as follows:
ft8sim_gfsk.f90 => ft8sim.f90
ft8sim.f90 => ft8sim_fsk.f90

This change reflects the fact that the GFSK waveform is now used in WSJT-X
for ft8 and ft4.
2019-11-27 09:08:17 -06:00
Steve Franke
63e9c21a17 Simplify ft4sim by removing waveform generation code and replacing it with a call to gen_ft4wave.f90. 2019-10-24 10:36:50 -05:00
Bill Somerville
28f5cb0fb9 WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qXxcACgkQ2GSwbR6B
 YY/ZGAf8Da+a+83dpnj5dnosIKWwSwgpiWHY0JKzm8fp0n3hcs5+rV1/gM81xXKT
 J3lbHWykGzMYlZNoEw3eNwQbXzOCf/7mOaeTKJQnBLukMpTLmsz5b5nYaCjvvRGM
 6HKSddNS3Q4iz4qdakOgWnqdZeYJkRR3Z3XsTmlrG02GsSVlbXzOEyceooqM6EGd
 w5WTkvpls+43OzwcGJ50SHzPlBAJYycE9vrAxxFOxU2fhqRRD/ttMZmUmjRY7Iqa
 jRRQ39K1Io7i9QG/3V6FBZDttqeFfvvlkVzH0/TeMeCUOQiKbzuGxM01PJ6be7D1
 H114v5l06GH56T7qpaF0IB2ZStkbrA==
 =voDy
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qX30ACgkQ2GSwbR6B
 YY8p0QgAgt8Y/yLCyFw0+wfO2h8yIFyh2j1c8EfBf0+I/2xaIYMUfPPlmC3jkWhw
 mtoCJVKkpCNcxr9mo6wjQp7x90pRUH3k78O0VtzbKWz7lveoN7Vguo+iVHDbEhUA
 a9E6yMwvskH5Mr6+cFiS4EVYyjAsuG/BL+4FFMDUVQOaKXNBbgJuc2mjpHkcnEbK
 C+XUxipcAUElH1Ks90eHT/vLoowAOP9jo0xSR1RqJMJlaKHxWZivsBCfQdI1xxn0
 arlQO3bjIsxyNq/Ru7XWV5C56JmWjoPWCcqt5GRrNJLwGw/haSuDIMURaE/vrMif
 csar293vcm5PzuTADArTQkhqK951pQ==
 =1mJJ
 -----END PGP SIGNATURE-----

Merge tag 'wsjtx-2.1.0' into develop

WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0
2019-07-13 23:47:18 +01:00