Joe Taylor
7096a548ec
Correct a problem with estimating rms of ccf for Q65-300x submodes.
2020-12-19 10:42:27 -05:00
Joe Taylor
7005ac3c50
Control "Call 1st" visibility with AutoSeq status in Q65 mode.
2020-12-19 09:10:34 -05:00
Joe Taylor
89ab3b0f01
Fix a bounds error with very small FTol.
2020-12-18 16:30:11 -05:00
Joe Taylor
450249dd4c
Add a DT label to the Q65 red sync curve.
2020-12-18 16:19:01 -05:00
Joe Taylor
67b82c7666
Remove the klunky 2D sync plot. The red sync curve is better.
2020-12-18 16:00:33 -05:00
Joe Taylor
5315bbd88a
Don't erase the red sync curve too soon.
2020-12-18 15:14:17 -05:00
Bill Somerville
e7c8eba2a5
Initialize member variable in correct place
2020-12-18 19:59:25 +00:00
Joe Taylor
04b11fda14
Don't plot the green line if using Q65_Sync.
2020-12-18 14:01:10 -05:00
Joe Taylor
b3769bb6c8
For Q65, plot a red "Sync curve" in the Wide Graph.
2020-12-18 13:31:14 -05:00
Joe Taylor
5a9a2c8279
Move Q65 default 6m frequency to 50.275.
2020-12-18 10:18:29 -05:00
Joe Taylor
d165532dc5
Oops! Committed the wrong version of q65_decode.f90.
2020-12-17 19:06:07 -05:00
Joe Taylor
8507a42655
Quasi-graphical display of the sync ccf(f0,DT).
2020-12-17 17:02:28 -05:00
Joe Taylor
6b8abe32b1
One more protection against too-large FTol.
2020-12-16 15:51:46 -05:00
Steven Franke
17195680ee
Don't waste time on excess BP iterations when doing K=50. Decode a little deeper.
2020-12-15 14:31:46 -06:00
Joe Taylor
7051dc7ee6
Remove more vestiges of the obsolete "JT9+JT65" mode.
2020-12-15 14:48:27 -05:00
Joe Taylor
a47ec75f56
Reformat the test_q65 headings and output.
2020-12-15 13:17:31 -05:00
Joe Taylor
0ee61205aa
Disable diagnostic writing to 'fort.55' in CWD.
2020-12-15 11:37:48 -05:00
Steven Franke
c87926e657
Append decoder data to file fst4_decodes.dat instead of overwriting.
2020-12-15 10:32:57 -06:00
Joe Taylor
841bbac56e
Increase the Q65 list decodes to include reports -50 to +49 dB.
2020-12-15 11:03:06 -05:00
Steven Franke
1e5578b704
Do not save c2 files in FST4W mode.
2020-12-15 09:52:50 -06:00
Steven Franke
1878685134
If file decdata is present in the data directory, then write detailed decoder data to file fst4_decodes.dat in the same directory.
2020-12-15 09:46:16 -06:00
Joe Taylor
3160e63dc7
Several minor tweaks to Q65 decoding.
2020-12-15 09:32:24 -05:00
Joe Taylor
99377e4c24
Measure avg and rms of estimated SNR values, for comparison with generated SNRs.
2020-12-15 09:31:29 -05:00
Steven Franke
2960adc557
FST4W: Use K=66 for first OSD decode attempt and for updating fst4w_calls.txt. Use K=50 for 2nd attempt.
2020-12-14 16:25:37 -06:00
Steven Franke
939e35bd26
More work on K=50 decoding.
2020-12-14 10:19:48 -06:00
Steven Franke
771e71bc84
Remove some debug prints.
2020-12-13 15:47:38 -06:00
Steven Franke
535c02d900
Implements decoding of FST4W messages as (240,50) crc-less codewords.
...
By cascading the full 24-bit crc generator matrix with the (240,74) LDPC code generator, create a (240,50) generator that is used to decode with approximately 1 dB better sensitivity than the (240,64) with 14-bit CRC approach that is normally used. This approach treats the CRC bits as additional parity bits and provides no means for identifying incorrect codewords. All codewords on the list generated by the OSD algorithm have CRCs that match the CRC of the message payload. Codewords are validated by unpacking the message and comparing the unpacked message with the list of stored callsign/grid pairs stored in the fst4w_calls.txt file.
2020-12-13 15:33:12 -06:00
Joe Taylor
2a25a188d1
Add IV3NWV to mainwindow title bar.
2020-12-11 09:13:38 -05:00
Joe Taylor
c4dbfbbdca
Must call wspr_config(false) when entering Q65 mode.
2020-12-09 13:55:47 -05:00
Joe Taylor
003aeedb91
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-09 13:55:17 -05:00
Joe Taylor
cd95df4089
Protect against pathological combinations of RxFreq and FTol.
2020-12-09 13:45:05 -05:00
Bill Somerville
5b60ddada1
Merge branch 'feat-fst280' into develop
2020-12-09 15:33:58 +00:00
Joe Taylor
5b59633b2f
Re-enable transmission in Q65 submodes B and higher.
2020-12-09 09:34:09 -05:00
Bill Somerville
aa7f8e0894
Merge branch 'release-2.3.0' into develop
2020-12-08 23:15:56 +00:00
Bill Somerville
ad04f4fbd2
Extra example log configuration file for rig control diagnostics
2020-12-08 23:14:46 +00:00
Joe Taylor
218d0bf359
Remove version number from the User Guide's title. (It's on the next line, anyway.)
2020-12-08 13:49:17 -05:00
Joe Taylor
84591fa2ef
Protect against a bounds error with very large FTol.
2020-12-08 11:53:22 -05:00
Bill Somerville
7e1b74ecc0
Moon distance in astronomical data window, tnx Charlie, G3WDG
2020-12-08 00:01:46 +00:00
Bill Somerville
0079b30b1a
Merge branch 'feat-fst280' into develop
2020-12-07 23:02:26 +00:00
Bill Somerville
9c0fe669d6
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-07 20:43:49 +00:00
Bill Somerville
c9f9c1d7c8
Merge branch 'develop' into feat-fst280
2020-12-07 20:43:28 +00:00
Bill Somerville
b8f9708eac
Merge branch 'release-2.3.0' into develop
2020-12-07 20:43:03 +00:00
Bill Somerville
60792182ad
Environment variables to set audio buffer sizes and fix Windows Rx timing
...
The two environment variables:
WSJT_RX_AUDIO_BUFFER_FRAMES
WSJT_TX_AUDIO_BUFFER_FRAMES
each can be defined to an integer number which will be used as the
suggested audio buffer size for Rx and Tx respectively. Not setting
the variable or setting it to zero or less will cause the default
buffer size to be used, which should be a good choice for most, if not
all, systems.
2020-12-07 20:34:56 +00:00
Bill Somerville
0410f4718f
Merge branch 'release-2.3.0' into develop
2020-12-07 10:44:52 +00:00
Bill Somerville
cefc8e2645
Use the system localized short date format for Log QSO dialog dates
...
This brings these fields into line with other QSO start and end
date/time fields elsewhere in the user interface. Note that time entry
and edit fields use a fixed hh:mm:ss 24-hour clock format consistent
with UTC usage and of suitable accuracy for logging QSOs.
2020-12-07 10:41:33 +00:00
Bill Somerville
e5686cb21f
Minor documentation clarification
2020-12-07 10:40:52 +00:00
Joe Taylor
d42363587e
Swtich from a fast mode to Q65 now closes FastGraph and opens WideGraph, as it should.
2020-12-06 21:42:30 -05:00
Bill Somerville
3d9a099fce
Reinstate changes that were reverted from commit df2daf6
...
Changes were moved aside to simplify a big merge commit with many
conflicts.
2020-12-07 00:18:52 +00:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280
2020-12-06 22:27:07 +00:00
Bill Somerville
f290cec93b
Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls."
...
This reverts commit df2daf60bd
.
2020-12-06 17:51:06 +00:00