w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-15 16:42:12 -05:00
Code Issues Packages Projects Releases Wiki Activity
3,552 Commits 5 Branches 98 Tags 208 MiB
8fe7d5c5de
Commit Graph

1253 Commits

Author SHA1 Message Date
Bill Somerville
fed0e9e171 Make handling of special CQ messages consistent 
CQ NNN ... and CQ aa ... are  coalesced to CQ_NNN ... and CQ_aa ... so
as to keep the word count and indexes consistent with plain CQ ..., DE
... and QRZ ... standard message forms when parsing messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7356 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-12-04 00:54:58 +00:00
Joe Taylor
d972375792 Permit use of "CQ nnn" and AutoSeq in fast JT9 submodes. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7345 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-28 19:34:52 +00:00
Joe Taylor
8cf4fd2f8e No longer any need for the checkbox labeled "Rx frequency offset with CQ nnn" on the Settings -> General tab. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7343 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-28 16:20:57 +00:00
Joe Taylor
4838d97370 New parameters for AP decoding in QRA64. Do not use this revision on the air! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-27 15:50:47 +00:00
Bill Somerville
840163ab97 Change the "CQ nnn ..." logic to specify the calling frequency... 
... rather than the working frequency.

Users set their working frequency and specify a calling frequency as a
kHz offset  into the  current Rx  MHz with the  main window  spin box.
Calling CQ on  the specified calling frequency is  enabled by checking
the associated option.

Also enhanced  the auto  sequencing to handle  short code  73 messages
correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-27 01:34:43 +00:00
Joe Taylor
0ae13699df Allow double-clicking in JTAlert to start a QSO. Please test! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7336 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-23 00:42:23 +00:00
Joe Taylor
d53085b552 Correct a flaw that could cause Tx to start as a result of a decode with AutoSeq active. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7329 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-22 15:47:59 +00:00
Joe Taylor
14d44f483b Display "OOO" at end of Tx message in status bar. Correct the logic for regenerating standard messages when "Enable VHF features" is changed. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7324 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-21 15:46:17 +00:00
Joe Taylor
c8d7421ead Don't allow CW ID to extend Tx stop time beyond normal sequence boundary. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7323 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-19 18:28:14 +00:00
Bill Somerville
d416a0f5b4 Reset rig if it is found to be inactive 
One reason  for inactivity is  that a calibration adjustment  has been
made.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-14 21:17:28 +00:00
Joe Taylor
2d3a96b009 Use ISO 8601 format for Date/Time in ALL.TXT. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7312 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-14 15:29:38 +00:00
Joe Taylor
8b7a7e795d After double-click on CQ message, don't change audio Tx freq if VHF features enabled. Temporarily(?), list Rx, Tx, and Calling freqs in Status Bar. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7311 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-14 15:00:15 +00:00
Joe Taylor
8e1378bce3 If Monitor was OFF at start of band_changed(), return it to OFF when this function returns. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7306 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-13 20:28:53 +00:00
Joe Taylor
80787c0721 New sync pattern for QRA64; implement fast-fading algorithm for QRA64A-C. Several things in QRA64 still need attention, in addition to submodes D and E! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7301 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-08 20:11:02 +00:00
Joe Taylor
026b9a3916 Correct a flaw in behavior of "Lock Tx=Rx" (Tnx to VK4EME). CR in DXCall entry ==> do "Lookup" (Tnx to W9MDB). 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7297 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-07 13:47:09 +00:00
Bill Somerville
5152778813 Allow for new directional CQ messages in message processing 
Also relax entry validation so it  is easier to enter standard message
forms longer than 13 characters into message entry line edits.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7294 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-05 19:41:03 +00:00
Bill Somerville
dc62eb04ad Increase the OpenMP stack size limit for jt9 threads from 2Mbyte to 4Mbyte 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7293 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-05 00:39:09 +00:00
Joe Taylor
cdaa64324a Add warning message if VHF features enabled on a lower band. Clean up "Decoded Lines" table in User Guide, and corresponding ISCAT end-of-line characters. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-03 14:05:05 +00:00
Joe Taylor
0f10da8e0e Reactivate the "Reference spectrum saved" message box. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7280 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-02 17:57:25 +00:00
Joe Taylor
744a82346e Fix UTC wrap-around problem with timing of CW ID. Fix WSPR label mi/km. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-11-02 12:38:18 +00:00
Joe Taylor
e0f80b7afc Correct a flaw in deep4 (apparently caused by gfortran optimizer?). Move 
display of the "No More Files..." message until after the "Decode Finished"
message is received.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-31 14:24:02 +00:00
Joe Taylor
854d1287e4 I think this is better logic for enabling/disabling the checkbox that enables "CQ Rx nnn". Please check! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7269 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-30 23:52:25 +00:00
Joe Taylor
bc32b6a6ff Correct a bug that could switch to a JT65 shorthand message if Tx5 window 
is edited to (say) "73 ...".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7267 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-30 21:38:52 +00:00
Bill Somerville
cfb1a3cbe2 Use Qt signals to process configuration name changes 
This change maintains the encapsulation  of the MultiSettings class by
using  a  signal   to  notify  clients  of  changes   to  the  current
configuration name.

Modifications  to   the  MainWindow  class  to   display  the  current
configuration name in the status bar, if it is not "Default", based on
MultiSettings events rather than polling for changes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7257 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-28 17:15:04 +00:00
Joe Taylor
5fb0b05198 Fic label_7 for MSK144. User guide updates. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7256 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-28 15:33:56 +00:00
Joe Taylor
0c0e3ec978 Add a status bar label for configuration name (if other than "Default"). 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7252 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-28 14:33:00 +00:00
Joe Taylor
bc1ffa6839 Remove more diagnostic prints. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7244 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-26 19:13:18 +00:00
Joe Taylor
da6c803e89 Remove diagnostic print. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7243 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-26 19:02:43 +00:00
Joe Taylor
a0d27d23f7 Introduce a 1-second delay before starting wsprd. (There is probably a better 
way to make sure that the new .wav file is ready, before starting wsprd?)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7242 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-26 19:01:46 +00:00
Joe Taylor
1928850813 Correct some values of the m_hsymStop. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7236 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-26 16:11:21 +00:00
Joe Taylor
e7237a0fa4 Prevents auto power tune from resetting attenuation to 0 by default. 
Fix autotune for tx pwr on band changes to keep current level if never set.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7233 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-25 22:49:20 +00:00
Joe Taylor
dcf8521c18 Minor tweaks to MDB patch and User Guide. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7232 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-25 21:15:12 +00:00
Joe Taylor
0441986ccc Add the W9MDB patch (very slightly modified) for band-by-band memory 
of power settings for Transmit and Tune.  Also an interim update of
v1.7_Features.txt.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7229 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-25 20:24:09 +00:00
Joe Taylor
a251c045e3 Rationalize several VHF-oriented features of the JT4 and JT64 decoders. More additions to the User Guide. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7227 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-24 20:48:24 +00:00
Joe Taylor
e4d10d4f19 Clarify what VHF-enabled JT65 messages get sent to the right window. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7226 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-24 17:01:47 +00:00
Joe Taylor
87d4f2fdbc Use bVHF rather than single_decode to control display of params at end of decode line. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-24 15:25:25 +00:00
Joe Taylor
5b47bbf22e Don't display dupes in JT65, even if minsync<0. Use VHFfeatures rather than single_decode to control display of Tol, etc., in plotter. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7224 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-24 14:56:14 +00:00
Joe Taylor
c1d5531603 For now, we'll allow click-to-decode in ISCAT mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7218 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-21 18:07:12 +00:00
Joe Taylor
0388eb2cf3 Fix the display/hiding of decodedTextBrowser2 and dexpdedTextLabel2 wrt ISCAT. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7214 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-21 16:29:09 +00:00
Joe Taylor
d964805c85 Include four more items in the "displayWidgets" list. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7212 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-21 15:32:05 +00:00
Joe Taylor
f698c7b77d Correct the "warbling" Echo tone after doing a JT9-fast transmission. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7211 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-21 14:23:06 +00:00
Joe Taylor
91ea5ffa08 Major refactoring of code that determines visibility of GUI controls. Please report any undesired or incorrect behavior! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7209 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-20 19:25:48 +00:00
Joe Taylor
c2d2ec8dd7 Remove vestigial references to WSPR_2. Update wsjtx.pro. Add samples for all modes. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7208 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-20 15:43:03 +00:00
Joe Taylor
78840744cb Replace commented-out frequency-setting statement. Make sure that RxFreqSpinBox is visible in JT4 mode, 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7207 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-20 13:16:58 +00:00
Joe Taylor
ec2c5b78d4 correct a flaw in "Decode remaining files in directory"; correct the widget visibility in ISCAT mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7201 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-19 18:09:27 +00:00
Joe Taylor
8c34a664e7 Fix the faulty logic in test for "No more files to open". 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7200 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-19 13:45:59 +00:00
Joe Taylor
fe920efb6f When auto-sequencing, don't call GenStdMsgs if we're already sending 73. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7193 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-17 17:58:05 +00:00
Joe Taylor
01c4e9eb1d Remove some no-longer-needed code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7192 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-17 16:57:04 +00:00
Joe Taylor
5da7e84f54 Correct a timing issue for saving MSK144 files in short (e.g. 5 s) sequences. Save after Alt-V even if Save = None. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7191 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-17 16:51:14 +00:00
Joe Taylor
213f8fabe9 Retain selected T/R sequence length when returning to MSK144 mode. Blank the right-text-window label in ISCAT mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7190 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-17 15:24:22 +00:00
Joe Taylor
d80f128a8a Decode button now does nothing in MSK144 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7189 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-17 14:35:59 +00:00
Joe Taylor
bf068fc6fd Re-enable "Save decoded". In fast modes, we no longer save all files and 
delete some later.  Rather, we save only those with real-time decodes (or
we save all).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7188 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-17 13:28:30 +00:00
Joe Taylor
ab400f7a9f No bounds-check for Release build; increase Windows stack size, again; some fixes for ISCAT mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7186 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-16 17:36:00 +00:00
Joe Taylor
efaa814ef6 Make CQ nnn widger wider; enable CQ nnn checkbox only if Split is active; make CQ nnn available to all users. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7185 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-15 13:23:40 +00:00
Joe Taylor
6d9ab6385c Many updates to User Guide. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-14 15:12:36 +00:00
Joe Taylor
d7b439a1e7 Change "WSPR-2" to "WSPR" everywhere; update some WSPR labels. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7181 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-14 14:15:34 +00:00
Joe Taylor
7ccef46ba0 Fix the broken "click-on-callsign" logic. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7178 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-13 21:32:30 +00:00
Joe Taylor
06ddf3c4f6 Sh and Tx6 checkboxes should be invisible if VHF not enabled. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7176 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-13 20:28:02 +00:00
Joe Taylor
f670825d84 1. Display "best of N" rather than "average of N" in Wide Graph waterfall. 
2. More fixes of widget visibilities.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7175 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-13 19:20:24 +00:00
Joe Taylor
328144f4fe For now, disable "Save Decoded". 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7174 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-13 18:14:20 +00:00
Joe Taylor
a3410b1e02 Display Hot A/B and El in MSK144 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7173 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-13 18:02:44 +00:00
Joe Taylor
443cbe1794 Switching VHF off in JT9 mode should make the submode spinner invisible. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7171 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-13 16:39:16 +00:00
Joe Taylor
1cc278cce6 1. Enable CW ID for fast modes. 
2. Correct several more flaws in making GUI controls visible or invisible.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-13 16:19:24 +00:00
Joe Taylor
19a25a42ff Fix the bug connected with setting start of yellow click-to-decode line in Fast Graph. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7169 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-12 18:34:38 +00:00
Joe Taylor
995fcf5359 1. Gray-out "Include averaging" and "Include Deep Search" if not in JT4 or JT65 mode. 
2. Make the "MSK144 Realtime decode" checkbox invisible, in preparation for removing it entirely.
3. Always use RealTime decoding in MSK144 mode.  (For now, at least, click-to-decode works as before.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-12 18:21:45 +00:00
Joe Taylor
f7ac6a732f Correct a flaw in display logic for cbFast9. Enable JT9-Fast decoding when MSK144 real-time decode is checked. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7166 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-12 17:09:36 +00:00
Joe Taylor
823b018592 Trying to make position and status of the central GUI controls correct and logical for VHF and non-VHF usage. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-12 16:33:18 +00:00
Joe Taylor
daf56b5186 Failed to save before commit. Fixed now. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7162 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-07 17:52:48 +00:00
Joe Taylor
15eb4e2796 Adjust the handling of "Save Decoded". (It is correct, yet,for all cases?) 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7161 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-07 16:51:50 +00:00
Joe Taylor
a8210b69ba Information message when list of files to open has been exhausted. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7160 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-07 16:35:34 +00:00
Joe Taylor
b1d53e1fad Fast modes: all decodes should go to ALL.TXT. MAK144: label the right text window "QSO Messages". 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7157 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-07 15:23:37 +00:00
Joe Taylor
eebcdcd42a git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7155 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 2016-10-06 18:56:16 +00:00
Joe Taylor
ff25140273 git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7154 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 2016-10-06 18:55:11 +00:00
Joe Taylor
216259c71f Tx2 should use full calls, even with "Sh" checked in MSK144 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7152 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-05 14:20:25 +00:00
Joe Taylor
bda40d5c5d Send MyCall, HisCall, and state of Sh checkbox to mskrtd, to enable MSK144 Sh messages with the realtime decoder. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-04 14:01:02 +00:00
Joe Taylor
68e03f6c4e Another attempt to get both m_rptRcvd sent to log and valid spot sent to PSKreporter. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7147 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-03 22:52:01 +00:00
Joe Taylor
6dcdee836e Further speed improvements for MSK144 RT decoding. Fiz what I broke in the "click-on-CQ-message" logic. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7144 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-03 17:08:02 +00:00
Joe Taylor
4895b5f8ba More complete definition of CPU usage for MSK144 RT decoding. Speed is back 
to that of r7139.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-03 13:48:30 +00:00
Steven Franke
78652121fa MSK144 should auto sequence only when the box is checked. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7142 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-03 01:20:15 +00:00
Joe Taylor
eeac94e361 Don't send decodes from disk data to PSKreporter. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-02 23:41:41 +00:00
Joe Taylor
672a4e88b5 MSK144 mode: minimum Ftol=20; report received copied to Log screen; spots sent to PSKreporter. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-02 23:16:47 +00:00
Steven Franke
58b331b36b Make RxFreq step size 10 Hz in MSK144 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-02 01:14:35 +00:00
Steven Franke
0173ea4d6d 1. Initialize m_msg[0][0] to stop garbage decode right after startup. 2. Decouple RxFreq spinbox from printed/decoded frequency. 3. Limit RxFreq to 25 Hz steps in the range [1400,1600] when in MSK144 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7137 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-02 00:23:09 +00:00
Joe Taylor
8dc2fef844 Back out some changes that were broken. PSK reporter not yet functional for MSK144. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-01 20:10:46 +00:00
Joe Taylor
23785f60e4 Oops! Committed wrong versions. This code is not ready for use! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-01 19:40:26 +00:00
Joe Taylor
02ef8823ef 1. Allow Ftol down to 20 Hz in MSK144 mode. 
2. Do not adjust Rx Freq automatically after an MSK144 decode.
3. Insert the Rcvd report in log window.
4. Send MSK144 decodes to PSK Reporter.

NB: not all these are fully tested, yet.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-01 19:32:16 +00:00
Steven Franke
4fe86cef1e Try to squash double-decodes and gibberish prints. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-10-01 18:13:39 +00:00
Joe Taylor
2ba4865d84 This should have been committed with r7121. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-30 15:55:53 +00:00
Joe Taylor
bee5ea4c71 Minor cleanup; add some !$OMP stuff to msk144sync.f90, but it's not yet functional. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7119 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-29 16:39:14 +00:00
Joe Taylor
cd0895c26a Add a performance monitor for real-time MSK144 decoding. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-29 13:29:20 +00:00
Joe Taylor
57a5ad188d Send ndepth (value = 1, 2, or 3) to hspec(). MSK144 click-to-decode now calls 
the old fast_decode(); probably it should call hspec() instead?


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-28 20:41:41 +00:00
Joe Taylor
6579b93690 Progress toward full implementation of real-time decoding of MSK144. 
I believe file saving and auto-sequencing nor work.  Not sure about posting
to PSK reporter: please check.  


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7112 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-28 19:08:19 +00:00
Steven Franke
f210e47cd5 MSK144: 
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines. 
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-25 00:16:29 +00:00
Steven Franke
3df371f11b New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-23 22:28:11 +00:00
Joe Taylor
3b97ae7417 Implement real-time decoding in MSK144 mode, for testing. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-20 16:25:25 +00:00
Joe Taylor
68be179f34 Reconfigure mainwindow GUI properly after MSK144 -> WSPR -> MSK144. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7093 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-17 15:32:01 +00:00
Joe Taylor
c4d00b0f47 1. Display proper UTC on Fast Graph for files read from disk. 
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-17 13:34:40 +00:00
Joe Taylor
b15e3aed04 when TRperiod < 30 s, expand the Fast Graph scale so full width is 15 s. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-16 14:18:40 +00:00
Joe Taylor
c8d795df0a Increase range of report spinbox in MSK144 to -8 --> +24 dB. Limit the yellow click-to-decode bar to max at TRperiod. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7084 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-15 17:06:49 +00:00
Joe Taylor
3b93cd02b6 Spinners fopr Rx Freq and Tx Freq should not have been made visible in MSK144 mode; they are ignored in this mode, as present. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7080 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-13 21:20:16 +00:00
Joe Taylor
13ffbb20eb Remove JTMSK mode and all related routines. Beware of possible unintended side effects! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-13 17:52:45 +00:00
Joe Taylor
6243f89c35 Make Rx Freq and Tx Freq spinners visible in MSK144 mode. (Tx Freq is disabled.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7078 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-13 17:11:27 +00:00
Joe Taylor
7f039d57b4 Remove the arbitrary "-5 dB" from signal-meter readings. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7077 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-13 12:51:34 +00:00
Bill Somerville
66eaf24af0 Add a configurations button to the rig error message box 
This button pops up the same context menu as the configurations button
on the main window menu bar. This allows the operator to easily escape
from an incorrectly configured configuration without changing it.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7075 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-11 01:09:50 +00:00
Joe Taylor
73612cf6a5 Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-09 18:37:00 +00:00
Joe Taylor
05c19aecd2 Fix a bug intruduced in r7060 that prevented reading .wav files in fast modes. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7069 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-09 17:46:09 +00:00
Joe Taylor
2d9b729c6c Don't show the Auto Seq checkbox when it's not relevant. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7062 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-08 12:54:09 +00:00
Joe Taylor
1ecc3d7c01 Correct the m_hsymStop values for slow modes. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7060 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-07 19:00:55 +00:00
Joe Taylor
d3182f4161 Remove the "Robust sync" option. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-07 17:26:05 +00:00
Joe Taylor
ec281f93c4 Add a user control for Tx Delay, on the Advanced tab. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-06 23:18:48 +00:00
Joe Taylor
cbc4ef1b49 Change cbEME to cbAutoSeq (always). Protect against frequency jump in MSK144. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-06 15:36:17 +00:00
Joe Taylor
d99770d664 RO, RRR, 73 short messages apply only to JT65. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-06 14:01:28 +00:00
Joe Taylor
255b712602 Make Sh box visible and used in JT65 VHF-enabled mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-06 13:06:01 +00:00
Joe Taylor
1066dc2508 Don't allow naggressive > 0 unless VHF Features and Single Decode are both checked. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7054 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-05 17:33:07 +00:00
Bill Somerville
bdc8dd881c Now 6 digit locators are possible again add option to prefer type 1 WSPR messages 
This  option, on  by  default, maintains  backwards compatibility  for
non-compound  callsign  holders.   If   switched  off  and  they  have
specified a 6 digit  grid then it will be sent in  the type 2 protocol
using two messages and a hashed callsign.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7053 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-03 23:33:13 +00:00
Steven Franke
ca19e977c0 Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7051 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-09-01 21:50:52 +00:00
Bill Somerville
d58a7e0311 Fix an issue with 6 character grids not being used in WSPR 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7042 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-29 17:02:01 +00:00
Bill Somerville
d2a191aca0 Clear the DX grid if the base call of the DX call changes 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7040 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-29 17:01:46 +00:00
Bill Somerville
81ad76cacc Produce a warning message if the WSPR .c2 file cannot be written 
Thanks to Mike W9MDB for this patch.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7039 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-29 17:01:38 +00:00
Bill Somerville
7350eb0892 Strip decode quality information from decoded messages before parsing by double click 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7037 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-29 17:01:22 +00:00
Joe Taylor
c8e340cf88 1. Correct the max length of MSK144 decoded text strings. Thanks Mike!. 
2. Suppress rare QRA64 garbage decodes that contain "000AAA".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7033 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-16 19:17:45 +00:00
Bill Somerville
cc178ab6fa Create the splash screen before assigning the application name 
Even  though the  splash screen  does  not have  a title  it seems  to
interfere  with JTAlert  which  enumerates window  titles to  identify
WSJT-X instances. I'm not sure why  this is necessary, but if it helps
it should be benign.

Ensure that the  splash screen is hidden before any  message boxes are
shown, this is essential  at startup if there is a  stale lock file or
rig control error.

Be far less aggressive about bringing  the splash screen to the top of
the application window  stack. This may cause the splash  screen to be
obscured on some platforms.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7025 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-12 16:12:52 +00:00
Steven Franke
f803c5cf6f Add new MSK144 encoding routines and make the necessary accommodations. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7022 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-11 19:25:20 +00:00
Bill Somerville
afed56d008 Proper splash screen and release notes help menu link 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7007 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-06 13:52:14 +00:00
Joe Taylor
9684106dd7 1. Fix the nfqso < nf1 but in qra64.f90. 
2. Delay splash screen until after main window starts.
3. Keep cbTxLock enabled in QRA64 mode.
4. Update v1.7_Features.txt.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7005 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-05 14:14:24 +00:00
Joe Taylor
9993760bac Re-enable MSK144 click-to-decode, top panel only. 
Fix the improper display of "Fast" checkbox.
Disable "CQ nnn" checkbox if MyCall is not K1JT or K9AN.
Use AppDir as path to execute the LDPC encode program.
Don't display submodes in mode label for JTMSK, MSK144.
Make Rx Freq spinner invisible in MSK144 mode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7001 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-04 19:30:27 +00:00
Joe Taylor
5d68d2f1c8 Quantize short reports to 4 bits: -3 0 3 6 10 13 16 RRR 73. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6998 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-04 16:05:10 +00:00
Joe Taylor
dc7826d5ea Startup messge box for Alpha Release. New sigma limit in detectmsk40. Minor tweaks to GUI. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-04 15:20:16 +00:00
Joe Taylor
b299c8d5ad For now, remove the restrictions on use of QRA64 and MSK144. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-03 20:40:49 +00:00
Joe Taylor
ab8b6d0383 Move ldpc temporary files into platform-independent location. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6991 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-03 19:04:21 +00:00
Joe Taylor
8159e2da50 Tentative and temporary change to encode MSK144 in a separate process. 
NB: temporary files are being written to execution directory!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6989 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-03 15:34:42 +00:00
Joe Taylor
289ba66119 1. Fix cause of "frozen UTC" bug in MSK144 mode. (Could there be more than one cause?) 
2. Fix failure to remember Ftol setting in MSK144 mode.
3. Remove obsolete controls from Advanced tab.
4. Add control for "x 2 Tone spacing" on Advanced tab.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-08-01 19:46:19 +00:00
Joe Taylor
5de024d9ba Correct the value of nsym for sending an MSK144 short message. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6979 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-30 20:20:54 +00:00
Joe Taylor
2cf32da1ea Change the MSK144 short-message frame size from 32 to 40 symbols. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6972 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-30 02:06:18 +00:00
Joe Taylor
2b6ff14e4b MSK144 fixes: Click on lower panel of Fast Graph decodes from previous file; clicking beyond available data does not crash program. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6964 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-29 16:10:55 +00:00
Joe Taylor
e432dc421a First good decode in submode QRA64D. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6961 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-28 15:18:06 +00:00
Joe Taylor
dbe0f7b099 During tests, at least, allow use of Tx Freq spinner with VHF features enabled. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6943 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-23 14:59:25 +00:00
Joe Taylor
d1e23bdac8 Fix some potential bounds errors in setting frequency limits. Implement submodes QRA65B-E on the Tx side. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6942 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-23 13:22:34 +00:00
Steven Franke
a0231e1417 Fix QSY message when answering CQ nnn. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6933 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-20 23:42:20 +00:00
Joe Taylor
ef217b9dce When auto-sequencing, don't change Tx msg if we're calling CQ and receive a 73. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6919 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-14 17:50:28 +00:00
Joe Taylor
a48af8057b Add callsigns to temp list. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6918 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-14 17:19:18 +00:00
Joe Taylor
9544f60b5a Implement "pick to decode" on the MSK144 horizontal waterfall. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6917 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-14 17:06:52 +00:00
Joe Taylor
715d526601 In MSK144 mode, restrict the range of Ftol to values 50, 100, 200. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6915 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-14 15:18:55 +00:00
Joe Taylor
596b62b37e Fix a defect that could cause mis-naming a .wav file in fast modes. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6914 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-14 14:22:05 +00:00
Joe Taylor
4f0cfd6800 Max report in MSK144 is now +24 dB. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6913 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-13 23:13:42 +00:00
Joe Taylor
b7d4b277aa Replace the "+" sign in display of positive dB reports. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6912 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-13 20:32:48 +00:00
Joe Taylor
97b987f77f Reports in MSK144 mode are even numbers between -4 and +24 dB. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6910 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-13 20:05:56 +00:00
Joe Taylor
857388722d When MSK144 message is changed between long and short format, must inform Modulator. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6909 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-13 19:17:47 +00:00
Joe Taylor
211f8ba291 Save/Restore status of Sh box. Limit range of auto-generated short-message 
reports to -4 to +10 dB.  Include +/- sign in all reports.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6907 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-12 15:45:27 +00:00
Bill Somerville
feb7b2751f Fix regression in azimuth display on main window 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6906 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-11 23:35:24 +00:00
Bill Somerville
c586204d75 Add proper Qt validation for callsigns and grids 
Two      new     validator      classes     CallsignValidator      and
MaidenheadLocatorValidator   are   introduced    and   used   in   the
Configuration and MainWindow implementations.

MaidenheadLocatorValidator  supports  different  lengths  and  minimum
required  lengths  with  a  default of  subsquare  with  square  being
required.

The  message_aggregator  application has  been  enhanced  to show  the
current DX call and DX grid as shown in the WSJT-X main window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-10 22:20:30 +00:00
Bill Somerville
396dd6d491 Furter attempts to get the Tx watchdog and its UDP Status Message right 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6901 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-09 18:35:25 +00:00
Bill Somerville
e7e5e3f340 Further Tx watchdog refinements 
This should allow receivers of UDP Status messages to accurately track
the Tx watchdog status. Also some defects in the Tx watchdog logic are
repaired.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6900 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-09 02:27:57 +00:00
Bill Somerville
46ff34a04a Refactor a poor variable name 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6898 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-08 20:45:45 +00:00
Bill Somerville
aa88b067fb Don't increment watchdog timer in WSPR modes 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6897 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-08 20:45:33 +00:00
Joe Taylor
874204dfe9 Another attempt at optimizing the red sync curve for QRA64. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6895 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-08 15:22:50 +00:00
Joe Taylor
6d2e974b8d Call the MSK144 short-message decoder only if "Sh" is checked. Also, 
make ntol available to the MSK144 decoder.  


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6894 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-08 14:42:28 +00:00
Bill Somerville
73ac2ebc39 Add Tx watchdog status to UDP Status message 
Thanks to Mike W9MDB for contributing this patch.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6892 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-08 10:25:21 +00:00
Joe Taylor
807d5e595b Commit most of what's necessary for decoding MSK144 short messages, including 
the hash test.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6889 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-07 20:15:01 +00:00
Joe Taylor
ea3ec805ab Fix typo. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6884 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-07 00:17:47 +00:00
Joe Taylor
005e022ece Two more testers. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6883 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-07 00:11:41 +00:00
Bill Somerville
21aa890607 Ensure all main window child widgets are added to teh event filter 
This makes  all child widgets able  to reset the Tx  watchdog by mouse
click or key press.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6881 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-06 20:16:38 +00:00
Steven Franke
ccbf3a9896 Define the length of short msk messages. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6879 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-06 19:11:03 +00:00
Joe Taylor
ebf391a528 Start GUI mods to enable short messages in MSK144 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6877 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-06 15:06:47 +00:00
Joe Taylor
77e295d36d Plot a red "sync" curve in QRA64 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6876 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-06 14:18:23 +00:00
Bill Somerville
18871acc02 Fix minute timer 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6864 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-04 02:31:50 +00:00
Bill Somerville
3f1ea9d10c Make message boxes more platform independent with a wrapper 
Instead  of  using the  Qt  QMessageBox  class  directly a  new  class
MessageBox  (MessageBox.hpp)  has been  added  to  deal with  platform
independence issues like the title not being shown on Mac OS X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-03 20:31:19 +00:00
Joe Taylor
eb77d3d65a One more rename, QRA02 --> QRA64. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6850 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-02 13:06:41 +00:00
Joe Taylor
3016ccee01 Many renames: QRA65 --> QRA64, QRA02 --> QRA64. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-02 12:15:41 +00:00
Bill Somerville
23e4f34612 Switch to status bar notification of runaway Tx watchdog 
Rationalize the status bar construction and maintenance.

Ensure that incoming UDP Reply messages reset the watchdog.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6847 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-02 00:25:38 +00:00
Joe Taylor
6cbb45bc1f Correct the green marker in QRA mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6846 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-01 15:41:03 +00:00
Bill Somerville
82b8b99458 Keep compliance back to Qt 5.2 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6842 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-01 13:22:56 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog 
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-07-01 11:36:59 +00:00
Joe Taylor
0384d312a6 Temporary mode QRA02 is now basically functional (though buggy). 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6833 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-30 20:38:36 +00:00
Bill Somerville
c864766332 Ant mouse press or key press in the main window resets the Tx watchdog 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6831 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-30 16:25:47 +00:00
Joe Taylor
9870af6b2e Some progress in QRA01 --> QRA02. Correct minor flaws in mode setting and plotter. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6829 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-30 12:46:14 +00:00
Bill Somerville
b19e329ce2 Alert using the platform desktop mechanism for messages 
Message boxes and  accepted incomming UDP actions alert  the user even
if the  application is hidden.  This does not  steal focus as  that is
considered bad practice and is annoying.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6826 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-29 23:11:54 +00:00
Joe Taylor
100c3d3121 More changes for QRA01 --> QRA02. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6825 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-29 19:12:46 +00:00
Joe Taylor
ac77a0a5de Add KI7MT to list of "enable" calls. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6813 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-28 16:14:06 +00:00
Bill Somerville
4c4b182b72 Allow for empty decode message in UDP reply message 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6812 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-28 15:53:50 +00:00
Joe Taylor
0943567625 Add Tx capability for QRA01. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6811 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-28 14:56:02 +00:00
Bill Somerville
db820683ff Fix a regression in WSPR saved file names from r6806 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6807 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-24 17:31:25 +00:00
Bill Somerville
c69bfee149 Fast mode audio recording behaves the same way as slow modes 
Fixed naming of fast recording files.

Tidied some signal/slot plumbing in the fast plotter.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6806 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-24 17:01:51 +00:00
Joe Taylor
529ad6eec9 First functional decoder for QRA01. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6805 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-24 14:36:03 +00:00
Joe Taylor
f146375dd0 More flexibility in QRA65code, including simple S/N simulations. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6802 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-23 13:58:18 +00:00
Joe Taylor
9c19ff3eea Making progress on what will become QRA65 mode. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6794 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-22 20:26:41 +00:00
Bill Somerville
2beef948d9 Adaptive sample block size to match FFT sizes 
This  change  corrects timing  discrepancies  on  the horizontal  fast
spectrum plot.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-17 01:27:00 +00:00
Bill Somerville
e7854d6c5b Do not apply reference spectrum in fast modes 
Using the reference spectrum discards a short part of the front of the
period's received samples which may have contained a decode candidate.

As  far  as  the  MSK  modes  are  concerned  the  reference  spectrum
correction is probably not applicable anyway.

Comment from Steve K9AN after offline discussions about this:

"In any  case, I  don’t think that  there is any  reason to  apply the
reference spectrum correction to the MSK modes. I do think that we are
paying a  performance penalty  in the MSK  modes for  non-ideal filter
responses at  the TX and RX  ends of the link  — but we would  need to
implement an  equalizer that  looks at  the received  sync words  as a
“training  sequence” in  order to  come  up with  anything that  could
improve the  results. This  would take into  account the  receiver and
transmitter  filters,  and  would  probably  be  different  for  every
TX/RX/meteor burst. My current thinking is  that for the low SNRs that
we are most interested in, and with  the short sync words that we use,
we  wouldn’t  be  able  to  do  a very  good  job  of  estimating  the
coefficients of the equalizer..."

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6776 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-13 19:52:23 +00:00
Bill Somerville
ba4cfb2311 Another uninitialized variable picked up by valgrind MemCheck 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6766 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-11 23:53:18 +00:00
Bill Somerville
282459b665 Clean up some memory leaks 
Move the  FFTW3 cleanup  into the  main routine as  it should  only be
called  once rather  than  every time  the  settings configuration  is
changed or reset (MultiSettings).

Call the new fini_ldpc_ routine before  exiting in the main routine to
free the LDPC resources.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6764 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-11 18:50:57 +00:00
Bill Somerville
c2a73723e0 Fix some initialization order issues introduced in r6755 
These include the wide graph window not being suppressed when starting
the application in a fast mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6762 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-11 18:50:41 +00:00
Bill Somerville
829dc3ec57 Make sure tune power tool tip only shows when adjusting the tune power using the UI 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6761 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-11 18:50:34 +00:00
Bill Somerville
c7344e0441 Another, hopefully final, fix for saving decocded WAV files reliably 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6757 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-10 22:59:41 +00:00
Bill Somerville
8e43af11e5 Fix numerous memory leaks and uses of uninitialized variables 
These were discovered when running under teh valgrind MemCheck tool. I
have also  checked in a suppressions  file (wsjtx-valgrind.linux.supp)
suitable for use on Linux when running the valgrind MemCheck tool.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-10 15:54:16 +00:00
Bill Somerville
66c390de79 More consistent highlighting and processing of general call messages 
Highlight,  in the  CQ  colour, CQDX  ... and  QRZ  ...  messages  and
process correctly for worked before and DXCC entity.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6753 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-09 23:39:48 +00:00
Bill Somerville
7be033e8c2 Report WAV file reading and writing errors 
Refactor the  save WAV  file routine  to return an  error string  as a
promise and then get that result and report in a QMessageBox.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6752 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-09 23:39:41 +00:00
Joe Taylor
df518f4e1d Make it possible to find MSK144 code-definition files in the "data_dir" on all platforms. 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6747 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-09 15:06:15 +00:00
Joe Taylor
143736129b Starting to implement the hooks for interfacing to QRA mode. 
Pass file path for peg-128 files to fast_decode().  (Inelegant, but it works.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-08 21:20:58 +00:00
Joe Taylor
ecd36a33b5 Starting what's needed to pass data_dir to fast_decode(). I need help! 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6740 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-08 19:49:50 +00:00
Bill Somerville
a6be978915 Ensure that tune specific Tx gain setting is not restored after it is cleared 
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6733 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
 2016-06-05 19:24:56 +00:00