Commit Graph

147 Commits

Author SHA1 Message Date
Steve Franke
c4d078f55f Remove unnecessary character string space-padding. 2019-01-03 14:02:17 -06:00
Steve Franke
1a8ddad307 In ft8apset, mycall and dxcall must be at least 3 characters long, otherwise they are treated as non-existent. 2018-12-24 11:19:07 -06:00
Steve Franke
b44d7b472d Fix a typo. 2018-12-24 10:49:40 -06:00
Steve Franke
318ce0020e Try harder to ensure that we don't waste time trying to do ap decoding that would involve nonstandard calls. Current code does not support ap decoding with non-standard calls. 2018-12-24 10:45:02 -06:00
Steve Franke
5034e21291 Remove some diagnostic writes. 2018-12-21 09:51:39 -06:00
Steve Franke
7a40bf2e4b Use separate hash tables for 10, 12, and 22 bit hashes. Make unpacking i3=4 messages depend on whether unpack is being done on a received message, or a to-be-transmitted message. Give mycall13 priority over hash table entries in certain contexts. 2018-12-20 15:08:29 -06:00
Steve Franke
307948a25d Remove an unused array. 2018-12-16 11:55:36 -06:00
Steve Franke
dfceef3662 Fix up ft8sim so that it prints a warning when SNR is set too high so that data will be clipped. 2018-12-07 11:10:25 -06:00
Steve Franke
337bae6d0d Housekeeping. Remove unused code and unused variables. Silence some compiler warnings. 2018-12-05 16:06:33 -06:00
Steve Franke
a5e82ac94c Delete an unused routine. Fix a typo in a comment. 2018-12-04 20:01:55 -06:00
Steve Franke
6fc27d550d Fix an egregious bug and another not-so-egregious bug. The egregious bug prevented decodes of most signals with negative DT. 2018-12-03 07:18:52 -06:00
Steve Franke
df37d9b1f7 Remove cqhund stuff and some other unused code. 2018-11-30 13:46:54 -06:00
Joe Taylor
461b87f047 Minor improvement in code that checks for bad FT8 messages. 2018-11-27 15:34:01 -05:00
Joe Taylor
9e74125799 Don't allow an illegal message to crash routine genft8(). 2018-11-27 15:26:24 -05:00
Steve Franke
ab34db7556 Get rid of unused variable ldecode77. 2018-11-05 14:40:55 -06:00
Joe Taylor
0235cf69ff Remove all vestiges of old (isync=1) FT8 mode. Many changes here! 2018-11-05 11:59:48 -05:00
Steve Franke
2b48cc4487 Update wsprd README and delete an obsolete program. 2018-10-31 21:02:46 -05:00
Steve Franke
87b97039b6 Remove a small bias in Watterson channel simulator channel amplitude. 2018-10-25 16:39:17 -05:00
Steve Franke
17ed242878 Minor tweak - make program name the same as file name. 2018-10-19 19:45:38 -05:00
Steve Franke
d0f0d420a9 Convert ft8sim.f90 to use 77bit messages. Remove ft8sim2.f90. 2018-10-19 16:52:00 -05:00
Steve Franke
fffa692ac5 Convert ft8code to 77bit messages. 2018-10-19 16:36:32 -05:00
Steve Franke
59278b9b6b Tweak ndeep determination. 2018-10-10 16:06:53 -05:00
Steve Franke
4b54873c81 Implement AP for all contest modes and also for Hound mode. AP is always active for Hounds. AP is automatically disabled if MyCall or DxCall are extended callsigns. 2018-10-04 17:48:55 -05:00
Steve Franke
0b3b050221 First cut at AP decoding for all values of ncontest. 2018-10-04 17:48:23 -05:00
Steve Franke
876f69b1d7 Remove some debug print statements. 2018-10-04 17:47:52 -05:00
Steve Franke
b993935494 Reconfigure foxgen.f90 for 77bit messages. Fox now transmits only 77bit messages. 2018-10-04 17:47:36 -05:00
Steve Franke
b5cc35e430 Cleaned up and simplified AP decoding. Enabled AP decoding for ncontest=0 and ncontest=4 (RU) so far. Missing MyCall or DxCall or nonstandard calls will disable AP passes that wouldn't make sense. 2018-10-04 17:45:15 -05:00
Steve Franke
77bb49e9ac Beginnings of AP for RU. Not working yet. 2018-10-04 17:44:34 -05:00
Joe Taylor
6cecef42aa Restore a missing call to unpack77(). 2018-10-04 16:09:02 -04:00
Steve Franke
d9cf9bed3c Better handling of decodes with unhashed callsigns.
(cherry picked from commit 3b783a083e)
2018-09-28 17:07:28 -05:00
Steve Franke
13b5cc479b Fix and re-enable polyfit SNR. 2018-09-26 08:29:01 -05:00
Steve Franke
669d54197d Polynomial-fit SNR is still not right. Disable it again, for now. 2018-09-24 19:36:30 -05:00
Steve Franke
591de66a31 Fix up SNR calculation so that it reverts to SJF SNR when polyfit SNR is not sane. 2018-09-24 19:04:34 -05:00
Steve Franke
9075fef228 Revert to Steve's SNR estimator, for now. 2018-09-24 17:40:14 -05:00
Steve Franke
332a3f1561 Calibrate noise-baseline-fit based SNR estimate for FT8 v2 and print those estimates with decodes. 2018-09-23 13:03:20 -05:00
Joe Taylor
705004d206 Initialize i3, n3 before two more calls to pack77(). 2018-09-19 13:05:32 -04:00
Joe Taylor
653e53b125 Apply the fix for i3, n3 before calling pack77() in genft8_174_91.f90. 2018-09-19 11:48:30 -04:00
Joe Taylor
aca7273fc3 Correct the sizes of character variables msg and msgsent. 2018-09-13 12:39:08 -04:00
Joe Taylor
a9deb8c1fd Merge branch 'integrate-77bit' of bitbucket.org:k1jt/wsjtx into integrate-77bit 2018-09-13 09:51:34 -04:00
Joe Taylor
d82949c54e Correct the display of usage examples. 2018-09-13 09:50:34 -04:00
Steve Franke
642540ff8f unpack77 now returns logical variable unpk77_success, which will be .false. if there is something obviously wrong with the message. Still to do: set the flag if the unpacked message contains CQ in an implausible place. 2018-09-12 15:06:26 -05:00
Steve Franke
629d061e30 Move a couple of simulation files to fsk4hf, which will eventually be excluded from releases. 2018-09-12 13:46:40 -05:00
Joe Taylor
ca2c1a2b8b Don't use "appendage" ~ or ! on decoded lines. Protect against bad read in genft8_174_91. 2018-09-02 18:55:13 -04:00
Joe Taylor
a8ad1569cc Protect against a potential bounds error. 2018-08-31 10:47:31 -04:00
Joe Taylor
201b29993c More fixes related to nonstandard calls. 2018-08-29 14:18:56 -04:00
Steve Franke
20cfae891e Make sync8.f90 more robust. Increase number of candidates to 300. 2018-08-08 09:29:08 -05:00
Steve Franke
f7d423296f Minor code cleanup. 2018-07-29 17:15:02 -05:00
Steve Franke
b67589d29f Bring isync=1 message simulator, ft8sim, up to date. Fix ap decoding for isync=1 messages. 2018-07-29 16:29:11 -05:00
Steve Franke
df0b5e2622 Progress on AP decoding for 77bit messages. AP is basically working for regular i3=1 messages. 2018-07-28 17:32:45 -05:00
Steve Franke
750bf569f3 ft8sim2: make it easier to identify callsign and grid bits in simulated messages. 2018-07-28 09:26:54 -05:00