Commit Graph

344 Commits

Author SHA1 Message Date
Joe Taylor
b6032277d0 The "Best S+P" button is now functional. Needs testing! 2019-04-08 12:36:05 -04:00
Joe Taylor
ec97d0410e Possibly temporary: add a "Call Best" button for S+P use in FT4 mode. 2019-04-07 21:08:38 -04:00
Joe Taylor
964c148794 Fix the UTC displayed at left of waterfall in FT4 mode. 2019-04-07 13:36:29 -04:00
Bill Somerville
13e721dfb7 Merge branch 'feat-ft4sync' into develop 2019-04-05 11:26:42 +01:00
Bill Somerville
8d3bb379f9 Merge branch 'release-2.1.0' into develop 2019-04-05 11:15:21 +01:00
Joe Taylor
7f61c7a07b Reactivate the not-GA timneout message, for -rc3. 2019-04-04 16:20:07 -04:00
Joe Taylor
ed80b9c7e4 Remove "TU; " from a double-clicked message before processing it. 2019-04-04 12:47:10 -04:00
Joe Taylor
e49e80ffb7 Enable the "TU; ..." message in FT4 mode. 2019-04-03 13:15:23 -04:00
Joe Taylor
5aba83b9df Fix another minor FT4 flaw. 2019-04-03 11:49:39 -04:00
Joe Taylor
f24d45cb17 Fix a flaw in FT4 auto-sequencing. 2019-04-03 11:13:47 -04:00
Joe Taylor
6ea9f4990d Several tweaks to FT4 simulation and decoding procedures. Now -0.5 < DT < 0.5 2019-04-03 10:13:50 -04:00
Joe Taylor
013c06b6ca Fix a probmel with decoding FT4 from .wav files. 2019-04-03 09:25:32 -04:00
Joe Taylor
c8dae29425 Synchronized FT4 auto-sequencing now works. 2019-04-02 13:27:55 -04:00
Joe Taylor
181e5c7b9d Remove unused code left over from asynchronous FT4 mode. 2019-04-02 13:16:06 -04:00
Joe Taylor
d579e5973e Correct the size of saved FT4 .wav files. 2019-04-02 13:04:40 -04:00
Joe Taylor
fd239d9c07 Clean up some timing issues with time-synchronized FT4. 2019-04-02 11:39:28 -04:00
Joe Taylor
888b5fee28 Make "Tx 1st/Even" visible in FT4 mode. 2019-04-01 14:40:16 -04:00
Joe Taylor
e0d4c94cc1 Some very basic functionality for time-synchronized FT4. 2019-04-01 14:23:10 -04:00
Steve Franke
68308e23aa FT8: Tx waveform will now change (after a short delay) if Tx message is changed after a transmission has started. 2019-03-29 15:30:50 -05:00
Bill Somerville
9e75b5c2b5 Log buttons 2019-03-29 02:54:30 +00:00
Joe Taylor
e3d4a1c3a6 FT4: double-click on a yellow Tx mesage causes re-sending that message. 2019-03-28 13:08:43 -04:00
Joe Taylor
e4ebddcf13 When Tx1 entry is disabled, Tx1 button should also be disabled. 2019-03-28 10:41:56 -04:00
Joe Taylor
1da4809e1b Do not disable double-clicking when m_inQSOwith is populated. (Correct???) 2019-03-28 09:41:38 -04:00
Joe Taylor
e571349c69 In FT4 mode, let the Tx# buttons start a transmission. 2019-03-28 09:30:26 -04:00
Bill Somerville
760e7b1352 Disable expiration and associated nag message 2019-03-22 22:48:17 +00:00
Joe Taylor
665dbd0f78 With Alternate F1-F5 checked, let Ctrl+F1 send the message in Tx1. 2019-03-22 13:52:06 -04:00
Joe Taylor
e38091705b In FT4 mode, let F11 and F12 move Tx freq by +/- 120 Hz. 2019-03-22 10:57:09 -04:00
Joe Taylor
974cf50e16 Red label (ui->labDXped) should disappear in FT4 modeif we leave all contest modes. 2019-03-22 09:24:52 -04:00
Joe Taylor
2f0ff14134 Enable NA_VHF contest messages in FT4 mode. 2019-03-22 08:49:22 -04:00
Joe Taylor
e2db793b5d Don't save .wav files in FT4 mode unless SaveAll is checked. 2019-03-22 08:20:19 -04:00
Joe Taylor
212e4a3c07 Add a timeout message for what will become v2.1.0-rc1. 2019-03-21 12:36:38 -04:00
Joe Taylor
ffb6d3624f In FT4 mode, display only "for us" and Tx messages in right window. 2019-03-21 09:33:37 -04:00
Joe Taylor
3a6e26d645 Clean up the FT4 logic for setting status of labDXped, cbAutoSeq, cbFirst. 2019-03-14 12:03:07 -04:00
Joe Taylor
6a2effcfc6 In FT4 mode, Tx4 is now hardwired to the 'RR73' message. 2019-03-13 13:59:41 -04:00
Joe Taylor
e150d003d6 Fix an inforrect constant in ft4_rx() that skipped over first 0.208 s of Rx data. 2019-03-13 10:31:23 -04:00
Joe Taylor
e9a999cda1 Use the "TU; ..." message when starting another FT4 QSO almost right away. 2019-03-12 11:09:49 -04:00
Steve Franke
7a0823301a Remove some temporary code. 2019-03-09 10:03:01 -06:00
Joe Taylor
69675153a7 FT4 sequencing seems OK now (but needs thorough testing). No "TU;" msgs yet. 2019-03-07 14:36:58 -05:00
Joe Taylor
87826d1a6c Clean up some FT4 code. 2019-03-07 11:21:17 -05:00
Joe Taylor
ff0b6a03a4 Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2 2019-03-05 09:22:08 -05:00
Steve Franke
d7012267c0 CQ message type strings are now passed from mainwindow.cpp to ft4_decode.f90, to enable AP decoding of special CQ messages. 2019-03-04 17:10:57 -06:00
Joe Taylor
89cffbc959 Move the call to processMessage() to correct place in ft4Data(). 2019-03-04 10:11:55 -05:00
Joe Taylor
871ff3892b Use "CQ SCC ..." for Tx6 message if RTTY RU Exch = SCC. 2019-02-28 11:42:28 -05:00
Joe Taylor
6b5131ab5e Trial changes to support messages for Slovenian Contest Club's RTTY-like contest. 2019-02-28 11:21:06 -05:00
Bill Somerville
278c544a6a Merge branch 'develop' into feat-ft2 2019-02-26 11:52:14 +00:00
Steve Franke
fdca7c2dcb Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2 2019-02-25 15:03:55 -06:00
Steve Franke
3759198982 Remove ramp-up and ramp-down symbols. Instead, shape the first 1/8th of first and last real symbols. 2019-02-25 15:03:43 -06:00
Joe Taylor
fdfb655b06 Option to select "Low sidelobes" or "Most sensitive" for waterfall spectra. 2019-02-25 15:04:05 -05:00
Bill Somerville
ad75db3e06 Merge tag 'wsjtx-2.0.1' into develop
WSJT-X v2.0.1 GA release
2019-02-25 03:15:56 +00:00
Bill Somerville
c60fbc11b6 Fix samples CMake script and update NEWS and copyright dates
Preparation for v2.0.1 GA release.
2019-02-25 03:07:51 +00:00
Bill Somerville
a12e71f352 Merge branch 'master' into develop 2019-02-25 00:44:58 +00:00
Joe Taylor
25bfa3798a Transmit FT8 using a gaussian-filtered waveform. 2019-02-22 13:39:39 -05:00
Joe Taylor
aeddaeab9e FT4 now transmits a waveform generated from Gaussian-filtered frequency changes. 2019-02-21 12:10:27 -05:00
Joe Taylor
57a20f838f Remove the code that builds an ADIF file from FoxQSO.txt. 2019-02-21 10:24:58 -05:00
Joe Taylor
d5a1671210 FT4 decoding interval is now 288 ms. Saving of FT4 files is somewhat rationalized. 2019-02-21 10:08:18 -05:00
Bill Somerville
fd7bca080a Revert to direct Log QSO invocation rather than deferred for Fox logging
Deferring using a 0mS timer does not work for Fox logging as it may be
invoked  more  than   once  in  a  loop  when   multiple  streams  are
active.  This change  directly  calls the  logging member  function(s)
inside the message processing loop.

This change  was initially  made because  an unhelpful  database query
order along with a need to display the latest logged QSO at the bottom
of the  Fox log table view  was causing GUI unresponsiveness  when the
Fox log table had many rows.  The current implementation shows the Fox
log table view in descending time  order with the latest logged QSO at
the top  which avoids this  unresponsiveness issue (tested with  a Fox
log table with over 15,000 rows).
2019-02-20 19:40:36 +00:00
Joe Taylor
f1e7b0c30a Add (temporary?) code for converting FoxQSO.txt to an ADIF log. 2019-02-20 10:43:30 -05:00
Joe Taylor
c2cb55a68a Reduce FT4 chunk size fro 500 to 288 ms; suppress duplicate decodes from close to chunk ends. 2019-02-13 14:42:57 -05:00
Bill Somerville
8a1ff9e1a3 Reset QSO start time when aborting a QSO or clearing messages (ESC and F4) 2019-02-13 18:47:31 +00:00
Steve Franke
cbfcb76193 AP decoding basically works. Make data_dir setting work on the Mac. 2019-02-07 18:48:38 -06:00
Steve Franke
71cb6d9f50 Use 4 different Costas arrays to prevent false syncs as received frames move
through the analysis window.

Add a random 77-bit vector to each message so that tone transitions occur
even if the message contains a long string of 0 or 1 (like a CQ).

Add alternative sync calculation as an option (sync2), for testing.

Add basic framework for AP decoding.
2019-02-05 19:18:50 -06:00
Bill Somerville
4dfc4685e9 Make the UDP protocol Clear (3) message two-way
External servers can clear either or  both of the Band Activity and Rx
Frequency decodes windows. This was  requested by Dave, AA6YQ, so that
DX Lab  Suite applications can  clear old  decodes on band  changes to
ensure that decode highlighing is consistent.
2019-02-03 00:49:35 +00:00
Bill Somerville
846918e3aa Remove normal mouse double-click action for decode display windows
The normal  action selects the word  under the mouse pointer  and this
disrupts   callsign  highlighting.    Normal  single-click   selection
behaviour is unchanged  so text can still be selected  using the mouse
and copied if desired.
2019-02-02 20:38:56 +00:00
Joe Taylor
22209030e2 Move files all_ft4.txt and clockit.out to the data_dir directory. 2019-02-01 11:56:08 -05:00
Joe Taylor
04f085bb24 Proper handling of multiple decodes from one call to ft4_decode. 2019-01-31 13:55:21 -05:00
Joe Taylor
a80b955fe7 Decode FT4 over the full frequency range displayed in waterfall. 2019-01-31 12:10:58 -05:00
Joe Taylor
a7ded94313 Saved FT4 files must be at least 5 s long; Shift+F6 now works for FT4 files. 2019-01-29 15:24:08 -05:00
Joe Taylor
e11acde9fb Better handling of calls to ft4_decode(), depending on ring-buffer pointer. 2019-01-29 14:19:22 -05:00
Joe Taylor
3ab7c1edf6 Don't logQSO or transmit in response to a decode from disk. 2019-01-29 13:19:36 -05:00
Joe Taylor
65398bbffa Fix the UTC display on waterfall, for FT4 mode. 2019-01-29 12:12:54 -05:00
Joe Taylor
6d6e2e8314 Don't try to transmit a blank FT4 message! 2019-01-29 11:49:11 -05:00
Joe Taylor
e98231d4c1 Correct the call to genft4(); fix the displayed time for data from disk. 2019-01-29 10:39:34 -05:00
Joe Taylor
7a9240c9ef Basic saving of .wav files for FT4. 2019-01-28 15:58:14 -05:00
Joe Taylor
d5203e2da9 Code cleanup. 2019-01-28 14:20:32 -05:00
Joe Taylor
2e4035c8bb Insert red line on waterfall to mark an FT4 transmission. 2019-01-28 13:50:23 -05:00
Joe Taylor
7da4fc63a6 Add freq markers for FT4 to Wide Graph. Tentative default FT4 freqs for 40m and 20m. 2019-01-28 11:07:52 -05:00
Joe Taylor
6e4f0f32ee Remove FT2; implement basic functionality in FT4. 2019-01-28 10:19:46 -05:00
Joe Taylor
f6e3dbb8e9 Increase the FT2 Tx duration timer from 2200 to 2500 ms. 2019-01-25 16:52:38 -05:00
Joe Taylor
a0ddc1485e Make the ProgressBar invisible in FT2 mode. 2019-01-24 17:29:03 -05:00
Joe Taylor
edf4af5307 Be sure to set start time of QSO. 2019-01-24 15:58:08 -05:00
Joe Taylor
a9100f0291 Log FT2 QSOs when they are finished. 2019-01-24 13:02:47 -05:00
Joe Taylor
e55a8baa25 Minor tweaks to FT2 auto-sequencing and writes to all.txt. 2019-01-24 12:38:02 -05:00
Joe Taylor
c8cdd05f34 Implement auto-sequencing for FT2. 2019-01-24 11:58:57 -05:00
Joe Taylor
3fa7c7b9a7 More work on integrating FT2 (will become FT4?) into WSJT-X. Not finished! 2019-01-23 16:53:03 -05:00
Joe Taylor
14db0d682b Make double-clicking of decodes to work in FT2 mode. 2019-01-23 10:51:26 -05:00
Joe Taylor
50c1daf61f Use a timer to establish length of an FT2 (to be FT4?) transmission. 2019-01-23 10:09:18 -05:00
Joe Taylor
568fc0810e Tx now works, more or less, in FT2 mode. Needs testing! 2019-01-18 16:22:25 -05:00
Joe Taylor
5f03d97a9e Implement basic Rx capability for FT2 in WSJT-X. 2019-01-18 11:51:15 -05:00
Bill Somerville
5137b47c0a Switch off nag window for develop 2019-01-16 20:44:04 +00:00
Bill Somerville
0932ddaba1 Merge branch 'hotfix-2.0.1-rc1' into develop 2019-01-16 20:33:59 +00:00
Bill Somerville
b3d6871786 Minor changes to support Qt versions >=10 2019-01-14 19:47:08 +00:00
Joe Taylor
d8a5d84647 Disable the startup message about upgrading to v2.0. 2019-01-09 09:05:21 -05:00
Joe Taylor
b3a8930eef Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2019-01-09 08:48:22 -05:00
Joe Taylor
e12eabb65f Clear labAz on program startup. 2019-01-09 08:47:29 -05:00
Joe Taylor
5f38d30c75 Add "Erase WSPR hashtable" to the Filemenu. 2019-01-08 15:41:59 -05:00
Bill Somerville
e871860642 Option to always start new decode periods at the top of the Band Activity window 2019-01-08 18:03:43 +00:00
Joe Taylor
9226d0829f Correct a flaw in validating contest exchange data when logging. 2019-01-08 08:40:40 -05:00
Joe Taylor
949c5deda5 Refactor code that writes to ALL.TXT and ALL_WSPR.TXT. Iincludes better formatting. 2019-01-03 12:15:48 -05:00
Bill Somerville
5b0f713cd4 Defer dwonloading LoTW users file until "Settings->Colors->Fetch" button pressed
This change also repairs a defect in showing potential LoTW users when
the  "Settings->General->Show DXCC,  grid, and  worked before  status"
option is not checked.
2019-01-01 16:19:01 +00:00
Joe Taylor
90617b29ab Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2018-12-31 10:39:26 -05:00
Joe Taylor
9d0473f1e8 Include grid in Tx1 messages with <hisCall>, such as "<DF2018ARDF> K1JT FN20". 2018-12-31 10:37:36 -05:00
Bill Somerville
8c13df2bc6 Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1 2018-12-30 12:36:52 +00:00
Bill Somerville
12299957d7 Add Fox log ADIF export to the Fox Log window log table contextual pop up menu 2018-12-30 12:35:41 +00:00
Joe Taylor
8379fa86eb Optional key bindings for F1 through F5, especially for contest use. 2018-12-28 11:19:29 -05:00
Joe Taylor
cabd6bc869 Boost all message letters to upper case, even if tx6 editing is not 'finished'. 2018-12-27 14:44:50 -05:00
Joe Taylor
ba83ae0587 Retain CQ messages like "CQ xxxx K1ABC FN42", where xxxx is 1-4 letters or 1-3 digits. 2018-12-27 13:14:01 -05:00
Bill Somerville
a2ce15d4b1 Allow recevied signal reports from compound calls to be logged 2018-12-23 23:51:48 +00:00
Joe Taylor
c1b1daf9db Allow the logQSO dialog to modify "Rcvd" in NA VHF mode and have the changes flow through to N1MM. 2018-12-20 12:42:39 -05:00
Joe Taylor
9fd64f48de Allow the logQSO dialog to modify "Exch Sent" or "Rcvd" in RTTY mode and have the changes flow through to N1MM.
Something similar should be done for other contest modes.
2018-12-20 12:03:22 -05:00
Bill Somerville
d241217737 Add QDarkStyleSheet to Message Aggregator reference application 2018-12-17 01:48:45 +00:00
Bill Somerville
4fbefb9e99 Remove extraneous MainWindow UI element 2018-12-16 01:30:55 +00:00
Bill Somerville
97e04fd7e1 Merge branch 'master' into develop 2018-12-10 18:46:12 +00:00
Bill Somerville
b2cb2e1d2e Repair regression in Log QSO power and comments retention 2018-12-10 18:44:57 +00:00
Bill Somerville
72fef7aa30 Re-enable GA warning 2018-12-10 00:47:31 +00:00
Bill Somerville
784f75ea74 Fix an issue with g++ v8.2 compiles 2018-12-09 22:47:45 +00:00
Bill Somerville
205024f8ef GA release and make initial message show in GA version 2018-12-09 21:18:08 +00:00
Bill Somerville
035b5a2366 Improve v2.0 update announcement formatting across platforms 2018-12-09 01:38:37 +00:00
Steve Franke
5d8e5b0070 restore the return path that was commented out in commit 19fbb95 2018-12-08 12:00:58 -06:00
Steve Franke
19fbb95b8c Comment out some code related to the nextCall facility. 2018-12-08 10:56:29 -06:00
Bill Somerville
e3daedef92 Revert elision of AP information appended to decodes in ALL.TXT 2018-12-06 21:42:37 +00:00
Steve Franke
ed90b56819 cmath is needed 2018-12-06 11:11:57 -06:00
Joe Taylor
8134c334cb Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-12-06 11:11:06 -05:00
Joe Taylor
0ae8cade5e Fix a typo. Remove the RC timeout. 2018-12-06 11:10:09 -05:00
Bill Somerville
cf244660cd Removed unnecessary diagnostic print 2018-12-06 15:39:21 +00:00
Bill Somerville
7cd7989f45 Fix line ending handling when processing decodes 2018-12-06 15:34:46 +00:00
Bill Somerville
bf87499635 Fix truncation of non-FT8 decoded messages in ALL.TXT 2018-12-06 14:04:14 +00:00
Bill Somerville
b8e4517718 Improve performance of Fox and contest log view windows
This include inverting  the order of table view rows  so the newest is
at the top, without that the Qt MVC interactions when using a database
table based model is too slow and complex to manage.

The table views  now have sort by column capability  in the normal way
(click column  header to  reverse sort order)  for timely  logging and
non-disruption  of  Tx  starts  the  log  view  should  be  sorted  in
descending time order and scrolled to the last row added. Without that
Fox and  contest logging will work  but serious delays may  be invoked
that disrupt operation.
2018-12-06 05:41:16 +00:00
Bill Somerville
1c48b39b58 Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-12-06 02:18:24 +00:00
Joe Taylor
cc773b6586 Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-12-05 15:55:43 -05:00
Joe Taylor
044a126278 Proposed wording for the v2.0 GA startup message. 2018-12-05 15:54:42 -05:00
Steve Franke
c8853cb90c Use regex to decide how the GUI formats the Tx messages for subsequent packing by packjt77. Ensure that C4XMAS is properly flagged as a non-standard callsign. 2018-12-05 13:47:36 -06:00
Steve Franke
a5e82ac94c Delete an unused routine. Fix a typo in a comment. 2018-12-04 20:01:55 -06:00
Bill Somerville
041df48e96 Fix issues with auto scrolling log winddows to the last added row 2018-12-04 01:49:36 +00:00
Bill Somerville
025a0161f8 Add special operation mode enumeration to UDP status message
Also  updated  the  message_aggregator UDP  reference  application  to
exercise this field.
2018-12-02 23:19:08 +00:00
Bill Somerville
59fc83455d Add contest exchange send and received fields to UDP logged QSO message
Updated  message_aggregator and  udp_daemon reference  applications to
exercise this change.
2018-12-02 10:09:37 -05:00
Bill Somerville
fdb59cf6e9 Fix a cardinality issue in the contest and Fox log windows for the Band column
Foreign  key  relationship  with  the Bands  model  should  have  been
many-to-many instead of one-to-many.
2018-12-02 03:37:56 +00:00
Bill Somerville
94bbe52c73 Fixes several QDateTime time spec issues that effected contest logs and Cabrillo exports 2018-12-01 13:16:57 -05:00
Joe Taylor
d08ee43fc6 Set m_mode_Tx="JT9" when mode is switched to JT9. 2018-11-30 15:52:11 -05:00
Joe Taylor
d857f7745c Revert "Trial code for assigning F1 - F5 to contesting use."
This reverts commit c8aee58fe0.
2018-11-30 12:20:06 -05:00
Joe Taylor
53c458a42c Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-11-30 11:51:34 -05:00
Joe Taylor
c8aee58fe0 Trial code for assigning F1 - F5 to contesting use. 2018-11-30 11:50:44 -05:00
Bill Somerville
cf6311e007 Scan ADIF log asynchronously and new settings button to rescan ADIF log 2018-11-30 16:26:46 +00:00
Bill Somerville
fca4cccfc4 Make sure T/R period progress bar doesn't obscure temporary status messages 2018-11-30 16:03:20 +00:00
Joe Taylor
1fda18108c Merge branch 'hotfix-2.0.0-rc6' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc6 2018-11-29 09:07:35 -05:00
Bill Somerville
7113d58fb9 Use the QSO end time from the Log QSO dialog for the contest log records 2018-11-29 02:31:08 +00:00
Bill Somerville
e5b17e270c Improved decode highlighting
Add  "Settings->Colors->Decode Highlighting"  context menu  buttons to
unset b/g  and f/g colours.  Add colour value  as #rrggbb or  unset in
text  to list  items.  Improved colour  assignment  to decodes  giving
better and more intuitive behaviour.
2018-11-29 01:03:44 +00:00
Joe Taylor
cd56c2a840 Improved wording and formatting of startup message. 2018-11-28 09:20:43 -05:00
Joe Taylor
9bf2d9a553 Make sure that m_modeTx="JT65" when switching to JT65 mode. 2018-11-27 16:04:21 -05:00
Joe Taylor
56f91cfcbb Message with RR73 is not permissible in MSK144 with Sh enabled. 2018-11-27 15:06:56 -05:00
Joe Taylor
588d429c24 Merge branch 'hotfix-2.0.0-rc5' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc5 2018-11-26 08:54:18 -05:00
Bill Somerville
4dbba727ec Explicitly include MOC generated source 2018-11-26 01:42:57 +00:00
Bill Somerville
4334c997ee Add tool tips to log view windows 2018-11-25 22:30:28 +00:00
Bill Somerville
db51726da2 Move Fox log reset action to Fox log window context menu and allow deletes of QSOs
Move to OnRowChange edit strategy for log tables so that deletes from
view can be implemented cleanly.

Improve layout of log view tables by resizing to contents.
2018-11-25 22:19:41 +00:00
Bill Somerville
314d8a645b Replace deprecated Qt algorithms with C++ Standard Library equivalents 2018-11-25 22:13:15 +00:00
Bill Somerville
49b87fb5a6 Merge branch 'hotfix-2.0.0-rc5' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc5 2018-11-24 21:26:49 +00:00
Joe Taylor
ef053e5a9f Protect against execution of on_pbTxMode() when not in "JT9+JT65" mode. 2018-11-24 09:09:50 -05:00
Bill Somerville
c81b3c8e65 Validate contest QSO details before allowing logging
Basic  validation, must  have  non-empty exchange  sent and  received.
Abstracted log view window widget  behaviour into a base class. Turned
on  auto  resize  to  row  height in  log  view  windows  and  enabled
alternating colours. Convert  empty fields to NULL  when inserting new
log table  rows to signify missing  data. Trap insert row  errors when
adding  to contest  log table  so  that logging  can be  held back  if
constraints are not met. Re-factored  log QSO processing to try insert
row into log table  first and pop up a message  box if constraints are
not met, this pops  up the Log QSO window in case  it was initiated by
an auto log event.
2018-11-23 01:18:39 +00:00
Bill Somerville
8fce78473f Switch to .cbr as the default Cabrillo file extension
Should help to avoid accidents with  other .log extension files in the
WSJT-X log files directory.
2018-11-20 23:47:29 +00:00
Joe Taylor
636bc59c7c Merge branch 'hotfix-2.0.0-rc5' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc5 2018-11-20 07:57:34 -05:00
Bill Somerville
6f966f613d Display and export contest log times in UTC, not local time 2018-11-19 21:18:41 -05:00
Joe Taylor
e835adbc1a Dsable ToolTip on lbNextCall. Add text to the startup message box. 2018-11-19 09:15:37 -05:00
Steve Franke
c4d4097bb3 Tweak a tooltip to remove reference to type 2 callsigns. 2018-11-17 07:19:08 -06:00
Joe Taylor
c3ba6b83b9 Add "No own call decodes" checkbox for WSPR mode. 2018-11-16 09:30:40 -05:00
Joe Taylor
dd28dd2670 Remove the Mouse Timer. Make the AutoSeq checkbox sticky, again. 2018-11-14 11:33:46 -05:00
Bill Somerville
875c308d52 Merge tag 'wsjtx-2.0.0-rc4' into develop
Tagging the WSJT-X v2.0.0 RC4 release candidate
2018-11-12 22:19:15 +00:00
Bill Somerville
552df2d520 Revert the message averaging window to it's original single personality 2018-11-12 22:03:39 +00:00
Bill Somerville
26438d59e6 Merge branch 'hotfix-2.0.0-rc4' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc4 2018-11-12 19:12:25 +00:00
Bill Somerville
6fdad18201 Let Fox and Hound decodes flow to UDP message channel 2018-11-12 19:10:12 +00:00
Bill Somerville
6caa77b166 Stop show of contest log window when leaving a special operaation mode 2018-11-12 19:08:02 +00:00
Joe Taylor
af53806081 Correct the RC4 timeout message to read December 31, 2018. 2018-11-12 13:04:46 -05:00
Joe Taylor
c2abf53a0e JT65 Sh mode can send RRR, but not RR73. 2018-11-12 12:56:20 -05:00
Joe Taylor
b240e60d7d Don't let unchecking the Sh box make Auto-Seq available in JT65 mode. 2018-11-12 12:52:20 -05:00
Joe Taylor
f850b09315 Merge branch 'hotfix-2.0.0-rc4' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc4 2018-11-12 12:29:22 -05:00
Joe Taylor
9cfb6613aa For now, allow auto-sequencing only for FT8 and MSK144. 2018-11-12 11:58:16 -05:00
Bill Somerville
be7c40d45f Remove redundant ExchangeValidator class as now done by a regexp validator 2018-11-12 16:05:10 +00:00
Joe Taylor
e14fbd2fd0 Expand 22-bit messages to 37 bits. This fixes the double-click failure. 2018-11-12 10:29:26 -05:00
Bill Somerville
b2b56bbd90 Fix Fox log window item delegate to column mapping 2018-11-12 15:10:17 +00:00
Bill Somerville
3b26b40d81 Add new CabrilloLogWindow widget and integrate it into the application 2018-11-12 04:44:03 +00:00
Bill Somerville
df4dbd546b Add new CabrilloLogWindow widget to display/edit running contest log 2018-11-12 04:13:23 +00:00
Bill Somerville
dd931c490f Save and restore contest serial number between sessions 2018-11-12 04:09:27 +00:00
Bill Somerville
13c023f35d Refinements to the FoxLogWindow widget 2018-11-12 04:06:26 +00:00
Joe Taylor
682170ae54 Remove the restriction on double-clicking while transmitting. 2018-11-10 09:35:18 -05:00
Joe Taylor
d42fb7db39 Don't use "CQ HUND", it was a bad idea. 2018-11-09 16:27:24 -05:00
Joe Taylor
f752b08d71 Fix a typo. 2018-11-09 14:30:23 -05:00
Bill Somerville
a3346225e3 Merge branch 'hotfix-2.0.0-rc4' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc4 2018-11-09 18:55:26 +00:00
Bill Somerville
dcbfae6d02 Set up new source sub-directories in QMake project file
QMake requies the inclusion of sub-projects syntax to introduce source
sub-directories,  hopefully   this  will  allow  code   completion  in
QtCreator to function.
2018-11-09 18:49:33 +00:00
Joe Taylor
0579f5f130 Correct the auto-seq response to JT65 "OOO" msg. Also, don't permit Auto-seq when transmitting JT65 Sh msgs. 2018-11-09 12:46:02 -05:00
Joe Taylor
b1e6846829 Pad JT65 22-bit messages to 37-bit length, thus moving the end-of-line "f", etc. 2018-11-09 11:39:02 -05:00
Joe Taylor
c2d0d21ae7 Merge branch 'hotfix-2.0.0-rc4' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc4 2018-11-09 08:31:51 -05:00
Joe Taylor
6edefef70b Fox should default to calling "CQ HUND ..." 2018-11-09 08:31:14 -05:00
Bill Somerville
b92cb19dcd Merge branch 'hotfix-2.0.0-rc4' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.0-rc4 2018-11-07 23:56:07 +00:00
Bill Somerville
f9151ee3f2 Fix typos that break the build on non-Windows machines 2018-11-07 23:55:15 +00:00
Joe Taylor
829e3ec500 Change expiration date to 12/31/2018. 2018-11-07 14:26:08 -05:00
Bill Somerville
947b429723 Start implememntation of database based Fox log model and a new Fox log window widget
This change incorporates a reorganization of the GUI code with
widgets, validators, models, and item delegates being moved to
sub-directories.

Relax  the   requirements  of   the  ForeignKeyDelegate   and  related
CandidateKeyFilter classes to  allow them to work  with constant model
pointers for both referenced and referencing models.
2018-11-07 17:49:45 +00:00