2. New Setup options: "Tx disabled after sending 73" and "Runaway Tx watchdog".
3. Keyboard shortcuts:
Alt-D: decode again at QSO frequency (same as Decode() button)
Shift-D: full decode again, both windows
Alt-E: Erase()
Ctrl-F: Edit free text message
Alt-H: Halt Tx()
Alt M: Monitor()
Alt-N: Enable Tx()
Alt-Q: Log QSO
Alt-S: Stop()
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3155 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Option for user to set default fonts.
3. Minor tweaks to GUI appearance.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Blank line between periods should be in the RIGHT window!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3148 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Much better logic for choosing frequencies at which to attempt decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Shouls have mentioned in last commit:
3. Narrow-band decode always uses the "deepest" parameters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
decoder at the new frequency. CTRL-click (or CTRL-double-click) sets both
Rx and Tx freqs.
2. Amplitude at end of transmission is ramped down to prevent a "key click".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Correct a logic error in new Tx-message-selection code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
1. The "WSJT Traditional" setof six line-edit fields, radio buttons,
and Tx# buttons;
2. New configuration with buttons that generate each message for the
standard minimum QSO, one at a time.
NB: the logic for these buttons is not yet complete.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Adjusted mainwindow layout.
3. Added label at top level of decoded text widgets.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
for everything else.
NB: I have screwed up the vertical expansion of mainwindow: growth occurs
at the bottom, rather than in the text boxes. Help!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3129 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Option to display distance in miles.
Remove (or reduce?) negative red spikes at start of Rx period.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3128 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. "CQ DX" is now treated properly when the decoded line is double.clicked.
3. Displayed sync values reduced by 1/2.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3124 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
cumulative; each invocation of the decoder starts the file anew.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3118 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Change default JT9 frequencies on 60, 17, and 12 m.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Fix a bug in handling messages with no embedded blanks.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3115 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Clear DXCall and DXGrid boxes after logging a QSO.
Add instruction at top of "confirm LogQSO" screen; increase font size on
its labels.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
new version of the User's Guide (which itself is not yet finished).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3112 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
If CTRL is held down when double-clicking on a decode, the QSO freq (
both Rx and Tx) will be reset even if the first decoded callsign is MyCall.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Add a tab for Default Frequencies on Setup window.
3. Update Makefile.MinGW
4. Bump version number to 0.8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Fixed bug with default number of serial stop bits
3. Adjusted layout on setup dialog
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3096 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Save/restore band setting on program restart.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3090 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Signal reports 0 dB and above now displayed as "+03", "+16", etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Changed "Tx = QSO Freq" button to a band-change ComboBox.
Rig control of frequency setting and T/R now works on TS-2000.
T/R sequencing is not yet correct, but I thimnk it still works OK in the
DTR/RTS switching mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3083 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Spell out "Generate Standard Messages" on button.
Spell out "Drift" at top of decoded text window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3082 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
and run with PTT control via DTR/RTS.
Will need to replace a "labAzDist" label in mainwindow.ui.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3080 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Decoding now starts at t=50 s rather than t=52 s.
3. Label on "Auto is On/Off" button changed to "Enable Tx".
4. Three new options on the Setup menu, to help importing ADIF log into some
fussy loggers:
- Log HT9 without submode
- Convert JT9-x to RTTY for logging
- Log dB reports to Comments
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3077 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Tx macros are now enabled.
Bug in decoder fixed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Double-click on decoded line copies valid grid to dxGrid box.
Add button workd with an empty call3.txt file.
QSO start/stop times rationalized (somewhat).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
and ALL.TXT with proper formatting and line endings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3052 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Write log info to wsjtx.log, not wsjt.log.
Bump version number to 0.6.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3045 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Don't change frequency settings on double-click on decoded text, if
the first call is MyCall.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3038 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
