Commit Graph

594 Commits

Author SHA1 Message Date
Joe Taylor
9fe2fc6de0 Fix two problems: sometime incorrect setting of RxFreq in WideGraph, and incorrect timestamp for FST4W-120 and FST4W-300 decodes in ALL.TXT. 2020-09-21 14:35:16 -04:00
Bill Somerville
542ffe8311
Improve audio device handling and error recovery
where possible  audio devices that  disappear are not  forgotten until
the user selects another device, this should allow temporarily missing
devices or forgetting  to switch on devices before  starting WSJT-X to
be  handled more  cleanly. If  all else  fails, visiting  the Settings
dialog and  clicking OK should  get things  going again. Note  that we
still  do not  have  a  reliable way  of  detecting  failed audio  out
devices, in that  case selecting another device and  then returning to
the original should work.

Enumerating  audio devices  is expensive  and on  Linux may  take many
seconds per  device. To avoid  lengthy blocking behaviour until  it is
absolutely necessary,  audio devices are  not enumerated until  one of
the "Settings->Audio" device drop-down lists is opened. Elsewhere when
devices  must be  discovered  the  enumeration stops  as  soon as  the
configured device is  discovered. A status bar message  is posted when
audio devices are being enumerated as a reminder that the UI may block
while this is happening.

The message box warning about  unaccounted-for input audio samples now
only triggers when  >5 seconds of audio appears to  be missing or over
provided. Hopefully this will make the warning less annoying for those
that are  using audio sources  with high and/or variable  latencies. A
status  bar message  is still  posted for  any amount  of audio  input
samples  unaccounted for  >1/5 second,  this message  appearing a  lot
should be considered as notification that  there is a problem with the
audio sub-system, system load is  too high, or time synchronization is
stepping the PC clock rather  than adjusting the frequency to maintain
monotonic clock ticks.
2020-09-20 18:20:16 +01:00
Joe Taylor
1ab59a8d6b Fully configure WideGpahe after switching to JT65 mode. 2020-09-20 10:17:27 -04:00
Joe Taylor
327808a0bb One more try at fixing the Fmax() startup problem that Steve sees. 2020-09-18 13:33:30 -04:00
Joe Taylor
52bdd57e57 Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value. 2020-09-18 11:30:23 -04:00
Joe Taylor
41aa5dae74 Make the FTol control invisible in FST4 if Single decode is not checked. 2020-09-17 12:58:59 -04:00
Joe Taylor
e60fc1ca19 FST4 GUI controls for FLow, FHigh, should disappear when Single Decode is checked. And some related improvements. 2020-09-16 20:16:32 -04:00
Joe Taylor
21dc6a5c59 Connect the FLow and FHigh limits for FST4 decoding. 2020-09-16 17:23:59 -04:00
Joe Taylor
2266e8dbb7 Add FLow and FHigh spinner controls to set the FST4 decoding range. 2020-09-16 17:02:40 -04:00
Bill Somerville
abe470b24a
Fix a typo 2020-09-15 15:53:14 +01:00
Bill Somerville
e4eb6eb94e
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-15 10:31:04 +01:00
Joe Taylor
3886411fad Two more corrections to mode-switch settings of GUI controls in FST4/FST4W. 2020-09-14 13:55:30 -04:00
Joe Taylor
f20c45c167 FST4: Align WideGraph green bar with RxFreq on startup. CTRL-diouble-click on waterfall sets FTol=10 and calls decoder. 2020-09-14 10:56:54 -04:00
Joe Taylor
8f554321c8 Make sure that Tx audio frequency in FST4 mode comes from FST4 TxFreq spinner, not the WSPR/FST4W spinner. 2020-09-14 09:55:33 -04:00
Bill Somerville
5014c62bfa
Notify user when enumerating audio devices 2020-09-13 17:12:11 +01:00
Joe Taylor
39403c2520 Expand the range of allowable values for TxFreq in FST4W. 2020-09-13 09:38:39 -04:00
Bill Somerville
e096b77bc1
Ensure default FTol spin box range covers all possible values
This allows persistence between sessions to work correctly.
2020-09-12 15:58:25 +01:00
Joe Taylor
174893395b Ensure sending correct FTol value from GUI to decoder for FST4. 2020-09-12 09:54:13 -04:00
Joe Taylor
bcdaf395f1 Must set m_bFastMode=false for FST4. Fixes the reported "Hold Tx frequency" issue. Also, ensure display of WideGraph rather than FastGraph for FST4, FST4W. 2020-09-12 09:35:32 -04:00
Bill Somerville
66e887b2f9
Merge branch 'develop' into feat-dropped-frames 2020-09-12 00:19:04 +01:00
Joe Taylor
20085e0ec8 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-11 09:14:24 -04:00
Joe Taylor
2a1ef287a6 Add 300 and 400 Hz to the list of available FTol values for FST4. 2020-09-11 09:13:11 -04:00
Bill Somerville
7d63ef12fa
Remove unused actions from MainWindow UI source
Correct a typo as well.
2020-09-11 12:53:44 +01:00
Joe Taylor
e23f7b3434 Don't round off the FST4W RxFreq when FTol is changed. That was a bad idea. 2020-09-10 13:48:08 -04:00
Joe Taylor
b7dc101270 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-10 13:34:54 -04:00
Joe Taylor
b6f990fac2 Allow FTol values down to 1 Hz; let maximum FTol values for FST4 depend on TRperiod. 2020-09-10 13:33:33 -04:00
Bill Somerville
67bd56a6d6
Accessibility improvements 2020-09-10 16:29:51 +01:00
Bill Somerville
ae4cfaf1ae
Start Fox mode on correct tab of tab widget 2020-09-08 21:19:48 +01:00
Bill Somerville
db6a432a33
Ensure band/frequency combo box edit styling tracks current frequency 2020-09-08 15:24:55 +01:00
Bill Somerville
1d52daf7ee
Remove erroneous Qt emit keywords 2020-09-08 12:54:19 +01:00
Joe Taylor
72cffc9da4 Make the FST4/FST4W Quick-Start Guide available from the Help menu. 2020-09-06 13:31:19 -04:00
Joe Taylor
4ab8780dd8 Code cleanyup associated with removing Tab 2. 2020-09-05 15:22:18 -04:00
Joe Taylor
7aeb9d5e2e Remove the "Tab 2" option for generating Tx messages. 2020-09-05 15:11:32 -04:00
Joe Taylor
403d3a1041 Make "double-click on call" work in FST4 as in oter modes. 2020-09-05 14:09:33 -04:00
Joe Taylor
844fe26368 Fix "on_actionFST4_triggered()" so that it does not call another mode setup routine. 2020-09-05 11:53:23 -04:00
Joe Taylor
c1025b7c4c Allow user to set center frequency and FTol in FST4W mode. Needs more testing! 2020-09-05 10:34:55 -04:00
Joe Taylor
02928787b1 Save and restore the current setting of the FST4W RoundRobin control. 2020-09-04 15:38:04 -04:00
Joe Taylor
f24d15b16e Eliminate the FST4/FST4W submodes with hmod > 1. 2020-09-04 15:15:30 -04:00
Bill Somerville
dc423ff28b
Documentation updates for On DX Echo Doppler correction mode
Tnx Charlie, G3WDG, and Bob, KA1GT.
2020-09-03 19:38:40 +01:00
Bill Somerville
c5349f8da9
Dynamic update of on DX echo Doppler shift correction
Tnx Bob, KA1GT, and Charlie, G3WDG.
2020-09-02 21:25:58 +01:00
Bill Somerville
a623ed0baf
Ensure band/frequency combo box edit shows correct band 2020-09-02 21:08:25 +01:00
Bill Somerville
56741d5e10
Merge branch 'develop' into feat-dropped-frames 2020-08-29 14:05:52 +01:00
Bill Somerville
64f29318aa
Repair an auto-sequencing defect with UDP Reply message handling 2020-08-29 14:04:29 +01:00
Bill Somerville
3a71184040
Include period start time in dropped samples message box details 2020-08-22 18:12:12 +01:00
Bill Somerville
d1860df190
Only send local station info to PSK Reporter when necessary
Remove unneeded debug trace messages.
2020-08-18 12:47:17 +01:00
Bill Somerville
b1c53bc332
Fix a cosmetic FT6 DXpedition mode Hound issue that causes an assert 2020-08-17 01:52:47 +01:00
Bill Somerville
536e6568a6
FST4* messages do not need padding out to 37 characters 2020-08-16 02:34:18 +01:00
Bill Somerville
50da40413f
PSK Reporter connection opened & closed at the correct times 2020-08-16 00:38:19 +01:00
Bill Somerville
491a7b9a05
Ensure no connect with, or traffic to, PSK Reporter if not enabled 2020-08-15 23:32:10 +01:00
Bill Somerville
b984390711
Fix PSK Reporter spots of FST4W decodes with power <10 dBm 2020-08-15 23:29:53 +01:00