Bill Somerville
6b575d0029
Latest AD1C cty.dat - BIG.CTY 27 March 2019 version
2019-04-05 11:38:45 +01:00
Bill Somerville
29db2e4e13
Merge branch 'feat-ft4sync' into release-2.1.0
2019-04-05 11:28:12 +01:00
Bill Somerville
13e721dfb7
Merge branch 'feat-ft4sync' into develop
2019-04-05 11:26:42 +01:00
Bill Somerville
d9b5d2e11f
Development branch
2019-04-05 11:16:26 +01:00
Bill Somerville
8d3bb379f9
Merge branch 'release-2.1.0' into develop
2019-04-05 11:15:21 +01:00
Bill Somerville
8280d8ec96
Prep for a release candidate
2019-04-05 11:10:50 +01:00
Joe Taylor
7f61c7a07b
Reactivate the not-GA timneout message, for -rc3.
2019-04-04 16:20:07 -04:00
Joe Taylor
ed80b9c7e4
Remove "TU; " from a double-clicked message before processing it.
2019-04-04 12:47:10 -04:00
Joe Taylor
dac988d4ca
New sample file for synchronized FT4.
2019-04-04 10:00:41 -04:00
Joe Taylor
a545b83bc3
Command-line argument for decoding FT4 files.
2019-04-03 15:40:33 -04:00
Joe Taylor
e49e80ffb7
Enable the "TU; ..." message in FT4 mode.
2019-04-03 13:15:23 -04:00
Joe Taylor
b3f62276e7
Fix the DT values generated in ft4sim_mult.
2019-04-03 12:45:38 -04:00
Joe Taylor
5aba83b9df
Fix another minor FT4 flaw.
2019-04-03 11:49:39 -04:00
Joe Taylor
9fe179d396
Fix ft8sim_mult to generate synchronous FT4 signals.
2019-04-03 11:48:57 -04:00
Joe Taylor
f24d45cb17
Fix a flaw in FT4 auto-sequencing.
2019-04-03 11:13:47 -04:00
Joe Taylor
50d4120c0c
Add timer calls to FT4 decoder.
2019-04-03 10:26:47 -04:00
Joe Taylor
6ea9f4990d
Several tweaks to FT4 simulation and decoding procedures. Now -0.5 < DT < 0.5
2019-04-03 10:13:50 -04:00
Joe Taylor
013c06b6ca
Fix a probmel with decoding FT4 from .wav files.
2019-04-03 09:25:32 -04:00
Joe Taylor
c8dae29425
Synchronized FT4 auto-sequencing now works.
2019-04-02 13:27:55 -04:00
Joe Taylor
181e5c7b9d
Remove unused code left over from asynchronous FT4 mode.
2019-04-02 13:16:06 -04:00
Joe Taylor
d579e5973e
Correct the size of saved FT4 .wav files.
2019-04-02 13:04:40 -04:00
Joe Taylor
d1c5bbecfe
Add the new ft4_decode file.
2019-04-02 12:21:03 -04:00
Joe Taylor
fd239d9c07
Clean up some timing issues with time-synchronized FT4.
2019-04-02 11:39:28 -04:00
Joe Taylor
888b5fee28
Make "Tx 1st/Even" visible in FT4 mode.
2019-04-01 14:40:16 -04:00
Joe Taylor
e0d4c94cc1
Some very basic functionality for time-synchronized FT4.
2019-04-01 14:23:10 -04:00
Bill Somerville
90afae422b
UDP message client accepts any sender id on incoming datagrams
...
This is a defect repair as it was intended that the message id is the
sender identification but the erroneous implementation enforced it to
be the receiver identification as sent with previous outgoing
messages.
2019-04-01 11:05:53 +01:00
Bill Somerville
6997937048
UDP message client accepts any sender id on incoming datagrams
...
This is a defect repair as it was intended that the message id is the
sender identification but the erroneous implementation enforced it to
be the receiver identification as sent with previous outgoing
messages.
2019-04-01 11:01:39 +01:00
Steve Franke
c7ec9b1927
Fix indenting. No functional changes.
2019-03-30 16:40:24 -05:00
Steve Franke
68f82c95de
FT4: Only do the big FFT once for each candidate. Duh.
2019-03-30 15:55:05 -05:00
Steve Franke
68308e23aa
FT8: Tx waveform will now change (after a short delay) if Tx message is changed after a transmission has started.
2019-03-29 15:30:50 -05:00
Bill Somerville
9e75b5c2b5
Log buttons
2019-03-29 02:54:30 +00:00
Steve Franke
73efc09392
Speed up sync.
2019-03-28 14:34:03 -05:00
Steve Franke
5e1637a5db
Fix a bug and remove a redundant sanity check.
2019-03-28 14:01:30 -05:00
Joe Taylor
67b9f327a5
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-28 13:21:02 -04:00
Joe Taylor
e3d4a1c3a6
FT4: double-click on a yellow Tx mesage causes re-sending that message.
2019-03-28 13:08:43 -04:00
Joe Taylor
54cd97f918
Protect against bad inferred candidate frequencies f0 in FT4 mode.
2019-03-28 13:07:37 -04:00
Steve Franke
fe8aa87401
Add some sanity checks to getcandidates4.f90
2019-03-28 11:13:26 -05:00
Steve Franke
3490c0d1e3
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-28 11:02:20 -05:00
Steve Franke
23c54540e7
Increase maximum wav file length to 20s.
2019-03-28 10:59:20 -05:00
Joe Taylor
e4ebddcf13
When Tx1 entry is disabled, Tx1 button should also be disabled.
2019-03-28 10:41:56 -04:00
Joe Taylor
6f00ec79a2
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-28 09:47:50 -04:00
Joe Taylor
1da4809e1b
Do not disable double-clicking when m_inQSOwith is populated. (Correct???)
2019-03-28 09:41:38 -04:00
Joe Taylor
e571349c69
In FT4 mode, let the Tx# buttons start a transmission.
2019-03-28 09:30:26 -04:00
Joe Taylor
cfb36395e0
Add some better usage examples for ft4sim.
2019-03-28 09:22:29 -04:00
Joe Taylor
580fce8320
Allow oddball file names for input to ft4d.
2019-03-28 09:21:01 -04:00
Steven Franke
4fdbf93e40
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-27 20:55:39 -05:00
Steven Franke
a605ff4050
For now, limit noise level estimation to [300,2500] Hz.
2019-03-27 20:55:15 -05:00
Joe Taylor
43c38de884
Minor tweaks for FT4 debugging and possible tuning.
2019-03-26 14:00:32 -04:00
Bill Somerville
303ff7da5f
Improved CMake script for 64-bit builds on MS Windows
2019-03-25 18:02:50 +00:00
Bill Somerville
40e710d7f8
Bump release candidate number
2019-03-23 01:24:10 +00:00
