Joe Taylor
4fa9557272
Add end-of-Rx-sequence number of buffers for 900 and 1800 s sequences.
2020-07-18 13:56:19 -04:00
Bill Somerville
43d6eacc4b
Refined stop times
2020-07-18 18:52:09 +01:00
Bill Somerville
60ddd40049
More 15 & 30 minute T.R period updates
2020-07-18 18:50:08 +01:00
Bill Somerville
28c5bfc1bd
Process double-clicks of Fox multi-caller replies correctly
...
This change also ignores attempts to double-click other Hound calls.
2020-07-18 14:47:20 +01:00
Bill Somerville
4e0f1103b6
15 and 30 minute T/R periods for FST240 & FST240W
2020-07-17 23:44:14 +01:00
Bill Somerville
cccb38dbef
Pass hints to fst240sim, genfst240, and packjt77::pack77 on WSPR msgs
...
Due to an ambiguity with message encodings between 77-bit QSO modes
and 50-bit beacon modes with message types 13.n3 4.0 and 0.6 a hint
needs to be passed to ensure the right encoding is emitted. The hint
only effects ambiguous messages, others will be encoded strictly
according to the message content.
2020-07-17 19:09:21 +01:00
Joe Taylor
64dc6c6a6e
Move the red goal post appropriately when FST240 or FSt240W mode is selected.
2020-07-17 12:00:15 -04:00
Bill Somerville
74970acdb7
Align FST240W round-robin scheduling with hours
2020-07-16 14:09:24 +01:00
Bill Somerville
785e9e7924
Undo a change only intended to testing
2020-07-15 14:45:08 +01:00
Joe Taylor
79dbdcca9c
Correct a typo.
2020-07-14 14:54:40 -04:00
Joe Taylor
8ff7da3884
FST240W should Tx at audio freq in WSPRfreqSpinBox, not TxFreqSpinBox.
2020-07-14 14:51:40 -04:00
Joe Taylor
c925f6d1cc
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-14 11:43:40 -04:00
Joe Taylor
cbeb81b499
Add LF/MF noise blanker capability for FST240 and FST240W.
2020-07-14 11:27:41 -04:00
Bill Somerville
479dc1113f
Use non-averaging decodes window headings for FST240
2020-07-13 13:27:12 +01:00
Bill Somerville
7118f1ad14
Correct T/R period options for older modes, and correct start times
...
Fix up decode window headings.
2020-07-12 01:38:36 +01:00
Bill Somerville
f77b6bf71a
Only show FST240W T/R period spin box in FST240W mode
2020-07-08 19:37:31 +01:00
Joe Taylor
4de41162a3
Make sure FST240W uses submode A.
2020-07-06 15:36:01 -04:00
Joe Taylor
d4bf73df84
Minor cleanup of RoundRobin control.
2020-07-03 14:17:13 -04:00
Joe Taylor
cbca2f2d80
No band-hopping in FST240W mode.
2020-07-03 10:06:52 -04:00
Joe Taylor
15014685ac
Round-robin control should be visible only in FST240W mode.
2020-07-03 10:05:16 -04:00
Joe Taylor
b9e92c416f
Implement round-robin scheduling for FST240W mode.
2020-07-03 09:48:01 -04:00
Joe Taylor
5637b229a0
Correct the logic for initializing TRperiod everywhere in FST240W mode.
2020-07-02 16:54:16 -04:00
Joe Taylor
9f3bb0fbb7
Show option "Also FST240W" only in FST240 mode.
2020-07-02 16:20:18 -04:00
Joe Taylor
ab2371a96b
Correct the logic for generating "Type 2: messages in FST240W.
2020-07-02 14:57:46 -04:00
Joe Taylor
1a82b9b24d
Change the label for decoded text panel in FST240W mode.
2020-07-02 14:11:35 -04:00
Joe Taylor
8b2b1eb378
FST240W should always set RxFreq=1500 and FTol=100.
2020-07-02 14:03:00 -04:00
Joe Taylor
34055d331a
Send TRperiod to WideGraph when entering FST240 and FST240W modes.
2020-07-02 13:48:35 -04:00
Joe Taylor
352b497399
Remove a diagnostic print.
2020-07-02 13:43:50 -04:00
Joe Taylor
860224e890
Many changes to make FST240W behave in most ways like WSPR. Needs testing!
2020-07-02 09:39:11 -04:00
Joe Taylor
e63b04bb44
Post FSt240W decodes to PSK Reporter.
2020-07-01 15:46:17 -04:00
Joe Taylor
0608521751
Remove unused references to WSPR_LF.
2020-07-01 15:12:14 -04:00
Joe Taylor
eb1c60e454
Remove several more vestiges of WSPR-LF mode.
2020-07-01 13:17:07 -04:00
Joe Taylor
8903041aa9
Fix the startup value of TRperiod for FST240W mode.
2020-07-01 12:10:42 -04:00
Joe Taylor
f2c3cbf9ac
Implement basic functiionality of FST240W in the GUI.
2020-07-01 12:01:47 -04:00
Joe Taylor
ae54c80a54
Here's a start on GUI changes to support FST240W as well as FST240.
2020-06-30 17:14:58 -04:00
Joe Taylor
a44b240192
Change to NSPS=720 for 15-seconf FST240 modes, to allow use for EME.
2020-06-29 17:33:46 -04:00
Joe Taylor
ae6ca148bd
Pass mode name to the Modulator.
2020-06-29 14:47:46 -04:00
Joe Taylor
494481fa8a
Remove a poisonous but unused line of code.
2020-06-28 20:22:24 -04:00
Joe Taylor
7d094b36bf
Fix the "double-click on AP decode" crash.
2020-06-28 23:23:10 +01:00
Joe Taylor
1610375eee
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-06-28 16:27:23 -04:00
Joe Taylor
5b22280631
Fix the "double-click on AP decode" crash.
2020-06-28 16:26:22 -04:00
Bill Somerville
d5c5a58c7f
Merge branch 'develop' into feat-fst280
2020-06-27 22:14:09 +01:00
Joe Taylor
2b85c70bbc
Correct the m_hsymStop values for FST240-300.
2020-06-27 16:58:55 -04:00
Joe Taylor
51447ef1d3
Remove the 1 s offset in wave() array. Fix NSPS for 300 s periods.
2020-06-27 16:24:11 -04:00
Joe Taylor
eb167b11d3
Fix several more GUI parameters for FST240.
2020-06-27 14:13:59 -04:00
Joe Taylor
cd9146e646
Change a few more GUI parameters for the switch from FST280 to FST240. Tx timing probably still needs work.
2020-06-27 13:07:11 -04:00
Steven Franke
390884268c
Wholesale change from FST280 to FST240
2020-06-27 08:53:11 -05:00
Bill Somerville
4ee9ba6dba
Merge branch 'develop' into feat-wspr-user-hardware
2020-06-27 00:40:04 +01:00
phl0
6cbc91b653
Include prop mode in ADIF and UDP messages
2020-06-26 23:45:58 +01:00
Bill Somerville
27b4f2939a
More flexible execution of the user's hardware controller
...
Updated ways to implement a user defined hardware controller which is
executed just after band changes during WSPR band hopping operation.
Allows the user_hardware executable to be located in any directory on
the PATH environment variable. On Windows any file extension listed on
the PATHEXT environment variable may be used, the first match using
PATH and PATHEXT will be executed. On Windows this is achieved by
using CMD.EXE with a '/C' command line flag, i.e. the user's hardware
controller is executed like this:
CMD.EXE /C user_hardware nn
where 'nn' is the new band as an integer in meters.
On non-Windows systems the user's executable will be run if it is
found on the directories specified by the PATH environment variable,
and it is executable, i.e. it is equivalent to something like:
/bin/sh -c user_hardware nn
where 'nn' is the new band as an integer in meters.
In all cases the user_hardware controller should exit with a zero
status, otherwise it have been deemed to have failed. On Windows avoid
an exit status of one as that is utilized by CMD.EXE to indicate the
file was not found, which WSJT-X ignores silently.
This change means the prior need to put the user's hardware controller
into a WSJT-X installation directory like /usr/local/bin or
C:\WSJT\wsjtx\bin is no longer necessary.
2020-06-26 21:35:29 +01:00
