Bill Somerville
a3efe8117c
Qualify regeneration of GFSK message regeneration to only when Txing
2019-09-07 21:23:39 +01:00
Bill Somerville
137bc1ccab
Tx waveform regeneration for GFSK modes Tx audio offset change
2019-08-15 15:20:45 +01:00
Bill Somerville
cefadfeaa3
Disable auto Tx before logging dialog shown even if disable Tx on 73 is not set
2019-08-13 00:20:40 +01:00
Joe Taylor
79b805b0e7
The start of some code for computing QSO points in WWROF/SCC digi-contest.
2019-08-08 09:55:08 -04:00
Joe Taylor
f265fa83f5
Disable the "not GA" warning message.
2019-07-18 15:30:33 -04:00
Joe Taylor
ced74644fd
On startup or switching to QRA64 mode, set Tx and Rx audio freqs to 1000 Hz.
2019-07-09 14:59:34 -04:00
Bill Somerville
adcf202637
Repair a crash when decoding ISCAT
...
Passing a auto stack variable to a future is not a good idea as it
will almost certainly go out of scope before the future has finished
executing.
2019-06-30 12:17:17 +01:00
Bill Somerville
c65d832356
New UDP messages to close and reconfigure WSJT-X plus more status fields
...
The Status(1) message acquires the new fields Frequency Tolerance, T/R
Period, and Configuration Name. The Rx DF, Tx DF fields become
unsigned (this should be a benign change which is just for correctness
as -ve values have never been possible).
The Close(6) message becomes bi-directional allowing external
applications to gracefully close down WSJT-X instances.
A new message SwitchConfiguration(14) is provided that allows an
external application to switch the current configuration of a WSJT-X
instance.
Another new message Configure(15) is provided to allow external
applications to adjust some key parameters like the mode and submode.
See the NetworkMessages.hpp header commentary for full details. The
UDPExamples/MessageAggregator reference application has been updated
to be able to exercise all of the above changes.
Note that this commit enforces stricter checking on the
"Settings->Reporting->Allow UDP requests" option, which must be
checked before any state changing incoming messages to a WSJT-X
instance are processed.
2019-06-25 14:35:58 +01:00
Bill Somerville
3f5a996842
New UDP message SwitchConfiguration(14) to switch to an existing configuration
...
The Status(1) message also acquires the current configuration name as
a new field. See NetworkMessage.hpp for details. The UDP reference
example program message_aggregator acquires the ability to display and
change the configuration of a WSJT-X client to exercise these new
features.
2019-06-13 01:44:28 +01:00
Bill Somerville
067692cd1e
Disable automatically enabled toolbar on Mac
...
Qt automatically adds a "Menu->View->Show Tab Bar" button, this
change disables that as we don't have a tool bar or tab bar.
2019-06-07 17:21:57 +01:00
Joe Taylor
3ff672705f
Change the F11/F12 frequency increments for FT4 to +/- 90 Hz.
2019-06-06 14:14:11 -04:00
Joe Taylor
9c3c5d6b3c
Turn Tx Enable to OFF after logging a QSO, even if "Clear DX call and grid after logging" is not checked.
2019-06-06 11:58:52 -04:00
Bill Somerville
ca41934b68
Repair an object instance initialization order issue that causes crashes
...
The background thread running the ADIF log load needs a valid
configuration object as it now depends on the "Include WAE entities"
option.
2019-06-03 00:35:20 +01:00
Bill Somerville
19c46774b4
Moving toward multiplier and dupe detection for contest modes
...
There's not much to show for this so far but some of the necessary
infrastructure is in place.
2019-05-30 22:20:09 +01:00
Bill Somerville
381faca99a
Add option to include or exclude WAE extra entities in DXCC entity lookups
...
Also refactored object relationships as a start to implementing
contest multiplier highlighting.
2019-05-29 23:35:18 +01:00
Bill Somerville
a54140582a
Tidied up cut-off criteria
2019-05-29 20:47:11 +01:00
Joe Taylor
dce016f6eb
Disable RC6 during ARRL June VHF contest, Field Day, and after July 21, 2019.
2019-05-28 12:09:34 -04:00
Bill Somerville
67ab7c7b8b
Add Alt+O hotkey to change the operator quickly without going to the Settings dialog
...
Thanks to Jim, W2JC, for suggesting this enhancement.
2019-05-28 12:18:54 +01:00
Joe Taylor
a521000775
No need to test FT4 and FT8 messages for trailing "f" or "d" indicators.
2019-05-24 11:04:30 -04:00
Joe Taylor
d5cd9db696
In FT4 mode, Shift+F11/F12 should move Tx freq by +/- 100 Hz.
2019-05-24 10:42:30 -04:00
Joe Taylor
637d4d0411
"Force Call 1st" must also force AutoSeq.
2019-05-24 08:31:56 -04:00
Joe Taylor
7334ebb20b
New user option: "Calling CQ forces Call 1st".
2019-05-23 14:31:08 -04:00
Joe Taylor
dfedc40db1
Fix some timing issues resulting from non-integral m_TRperiod for FT4.
2019-05-23 13:24:35 -04:00
Joe Taylor
8761ccef9b
Received data length for FT4 should be 21*3456 = 72576 samples = 6.048 s.
2019-05-23 09:23:58 -04:00
Steve Franke
a9623703b3
FT4: Change Fortran code to NSPS=576 and make necessary accompanying
...
changes on the C++ side. Basically works except that Tx audio has
incorrect DT and audio is truncated at the end. Also, command line
decoding using JT9 is not as sensitive as decoding from within WSJT-X.
2019-05-22 17:02:15 -05:00
Joe Taylor
912e40876a
Disable the "not_GA_warning_message", for now.
2019-05-22 13:06:16 -04:00
Joe Taylor
0d3be0128b
Change m_TRperiod from qint32 to double. Functional, but needs more testing!
2019-05-22 12:44:28 -04:00
Steve Franke
0d1b438b91
FT4: Fix generation of Tx5 when one callsign is nonstandard.
2019-05-04 09:33:53 -05:00
Joe Taylor
8104d80998
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-04-30 16:03:01 -04:00
Joe Taylor
c7a388f740
Send FT4 audio frequency to PSK Reporter.
2019-04-30 16:02:26 -04:00
Bill Somerville
3916316a1c
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-04-30 15:43:01 +01:00
Bill Somerville
b29a6d14ea
Workaround for a crash on macOS when compiling with gfortran 8.3
2019-04-30 15:13:26 +01:00
Joe Taylor
b2d6238b63
Fix a bug that caused FT4 to do WSPR band-hopping.
2019-04-30 09:38:20 -04:00
Joe Taylor
1347f523de
Allow RRR message in Tx4, in FT4 mode, if not using contest-style messages.
2019-04-30 09:17:34 -04:00
Bill Somerville
7de974a7ee
Fix settings acceptance jumping from FT8 to FT4 mode
2019-04-29 19:53:59 +01:00
Steve Franke
3b8b871a7c
Disable AP for mycall if more than 5 minutes since last Tx. Used to be 10 minutes.
2019-04-27 16:38:19 -05:00
Steve Franke
dc66304a65
Improve ALL.TXT formatting for JT9/JT65. Thank you to Sandro, IW3RAB, for submitting this fix.
2019-04-26 20:06:32 -05:00
Joe Taylor
a19d82e362
Fix a typo.
2019-04-24 09:30:02 -04:00
Joe Taylor
f308d5246e
Make the contest serial number spinner visible, where it should be.
2019-04-23 20:20:45 -04:00
Joe Taylor
dc627cb48c
Enable QSO types other than RTTY RU in FT4 mode.
2019-04-23 14:16:55 -04:00
Joe Taylor
eaf567747c
Fix the "Tx2 for Tx3" bug when using RTTY RU messages. Needs further testing!
2019-04-22 09:42:28 -04:00
Steve Franke
64bd55910a
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-04-19 15:14:14 -05:00
Steve Franke
25d07fd574
FT4: Hide AP Enable menu pick --- AP is always enabled, for now.
2019-04-19 15:14:08 -05:00
Joe Taylor
f78a9ec7df
Insert June 7 timeout date.
2019-04-19 15:42:37 -04:00
Steve Franke
e8d17a9898
FT4: Subtraction is basically working.
2019-04-18 14:16:39 -05:00
Steve Franke
be72461142
FT4: Some groundwork for subtraction.
2019-04-18 14:15:24 -05:00
Joe Taylor
f7b0e24e70
Correct a flaw in recently modified actions for key F6.
2019-04-17 14:53:20 -04:00
Joe Taylor
5826aefedc
Let "Best S+P" status time out after 2 minutes. Update the keyboard shortcuts.txt file.
2019-04-16 13:21:45 -04:00
Joe Taylor
b43d91240d
New end-of-QSO sequencing logic (possibly temporary) for CQing FT4 station.
...
When RR73 is received we log the QSO, turn "Call 1st" OFF, and call CQ again.
Also, allow Alt+C and F6 (the latter only if altenrate F1-F6 bindings
are active) to toggle "Call 1st" ON/OFF.
2019-04-15 16:26:41 -04:00
Steve Franke
cd8ea16f40
FT8: Use GFSK waveform with BT=4.0 as reference for subtraction, for now. May want to change to BT=2.0 before v2.1 release?
2019-04-12 17:11:26 -05:00
