Joe Taylor
375a869a51
Revert "Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again.""
...
This reverts commit 033cc65d08
2020-09-18 09:01:51 -04:00
Joe Taylor
033cc65d08
Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again."
...
This reverts commit bcf7f36b9c
2020-09-17 19:30:07 -04:00
Joe Taylor
bcf7f36b9c
Very basic code (including some diagnostics) for "try all NB settings". Will remove it again.
2020-09-17 19:28:55 -04:00
Joe Taylor
a1baaebee9
Decoder should reject data with rms < 3.0 over first 15 seconds.
2020-09-12 13:46:09 -04:00
Joe Taylor
47fcddcb50
Send nfa, nfb to fst4_decode().
2020-09-10 14:59:52 -04:00
Joe Taylor
01a1688b32
FST4 and FST4W decoder: get freq range from nfqso and ntol; remove BCD submodes, i.e. hmod=2, 4, 8.
2020-09-05 13:14:40 -04:00
Joe Taylor
f24d15b16e
Eliminate the FST4/FST4W submodes with hmod > 1.
2020-09-04 15:15:30 -04:00
Steven Franke
e02850ae5a
Streamline fst4_decode. Add timer for downsampling.
2020-08-29 19:55:22 +01:00
Bill Somerville
87dec9d433
Remove a remnant of "Also FST4W" mode
2020-08-02 00:42:09 +01:00
Bill Somerville
a7223a5efa
A few more cosmetic 240 -> 4 changes
2020-07-23 19:13:05 +01:00
Steven Franke
085e63e05d
Rename fst240 to fst4 in Fortran routines.
2020-07-23 12:48:50 -05:00
Joe Taylor
159b8a97f7
Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used.
2020-07-19 13:20:41 -04:00
Joe Taylor
f61cb1dcbd
Better display format for w50 with plotspec.
2020-07-15 16:03:36 -04:00
Joe Taylor
b3882a93c0
Extend write_ref() to compute freq offset and Doppler spread. Also some minor code cleanup.
2020-07-15 15:50:17 -04:00
Joe Taylor
185cf3eb48
"Also FST240W" should set iwspr=2, not 1. Change ndeep to ndepth, for consistency.
2020-07-02 13:30:18 -04:00
Joe Taylor
f2c3cbf9ac
Implement basic functiionality of FST240W in the GUI.
2020-07-01 12:01:47 -04:00
Joe Taylor
22b782a4ae
Can now decode FST240W signals from WSJT-X, using FST240 and the option "Decode -> Also FST240W".
2020-06-30 20:04:44 -04:00
Joe Taylor
ae54c80a54
Here's a start on GUI changes to support FST240W as well as FST240.
2020-06-30 17:14:58 -04:00
Joe Taylor
d7448347e5
Install a basic framework for handling FST240W decodes.
2020-06-30 15:11:36 -04:00
Joe Taylor
83fddb1f57
Pass more parameters to fst240_decode().
2020-06-29 12:21:34 -04:00
Steven Franke
390884268c
Wholesale change from FST280 to FST240
2020-06-27 08:53:11 -05:00
Joe Taylor
ad4fac6b3d
Implement "Single decode" for FST280.
2020-06-21 10:33:36 -04:00
Joe Taylor
f8d7489b4e
Fix many odds & ends for merging FST280 properly into the GUI.
2020-06-20 13:47:32 -04:00
Joe Taylor
d64e266e8f
Pass submode (==> hmod) to fst280_decode.f90.
2020-06-19 09:15:00 -04:00
Joe Taylor
5569700980
Send nutc to the fst280 decoder, and use it. Also some code cleanup.
2020-06-18 19:53:49 -04:00
Bill Somerville
402ce1b3fb
Enable passing decodes back to caller
2020-06-18 23:33:36 +01:00
Joe Taylor
72005888ac
Starting to implement callback routine fst280_decoded. Not yet functional!
2020-06-18 13:37:49 -04:00
Joe Taylor
5c3a340f72
Pass TRperiod (s) to fst280_decode().
2020-06-17 19:58:21 -04:00
Joe Taylor
5aeaf5dc78
Include h=8 and NSS=40 in the FST280 decoder.
2020-06-17 14:17:03 -04:00
Joe Taylor
81c0548919
Add a dummy fst280 decoder.
2020-06-17 11:50:28 -04:00
Joe Taylor
af9f7b21c0
Starting to implement FST280 decoder. Make Rx sequences behave as desired.
2020-06-17 10:56:18 -04:00
Joe Taylor
c92699531c
Correct the record length submitted to JT4 decoder when newdat is false.
2020-05-08 10:57:45 -04:00
Joe Taylor
399b0caafe
Enable "Decode after EME delay" for FT8. (Let the 1296 MHz EME guys play with FT8.)
2020-05-06 11:43:52 -04:00
Joe Taylor
4379ef9627
Fix a flaw in the new test logic.
2020-04-25 12:10:32 -04:00
Joe Taylor
f4811845cb
Add a feature for testing: simulate responses from another station.
2020-04-25 11:53:20 -04:00
Joe Taylor
35eb391e23
Clean up the formation and display of JT4 average and DS decodes.
2020-04-17 12:14:43 -04:00
Joe Taylor
c188f8ee89
More cleanup of the display of special JT65 decoding modes: avg, deep, AP.
2020-04-09 13:56:35 -04:00
Joe Taylor
0390791090
Fix some problems with message averaging, etc., in JT65 with VHF features enabled. Needs further testing!
2020-04-08 16:56:28 -04:00
Joe Taylor
fcc7739cb9
Correct an error in decoder.f90, introduced yesterday.
2020-03-20 10:11:08 -04:00
Joe Taylor
7cc81d800f
More code cleanup.
2020-03-19 15:53:44 -04:00
Joe Taylor
7de6b8c98d
Remove diagnostic writes. Don't save .wav files if "Save None" is selected.
2020-03-19 14:46:41 -04:00
Joe Taylor
0a076e0455
Silence compiler warnings.
2020-03-19 11:00:21 -04:00
Joe Taylor
4fa3ee3437
Silence compiler warnings.
2020-03-19 10:43:45 -04:00
Joe Taylor
5e94de71fd
Use tseq rather than ipc1 as test for early bailouts.
2020-03-16 12:11:56 -04:00
Joe Taylor
3962aa3c43
Replace hijacked ss(1:3,1) with a separate ipc(3) array.
2020-03-15 14:25:56 -04:00
Joe Taylor
8151816c84
Change formats of diagnostic writes so that GUI and Fortran output can be sorted together.
2020-03-13 11:25:22 -04:00
Joe Taylor
8e7685ea36
Do not alolow bailouts when data were read from disk.
2020-03-12 15:07:56 -04:00
Joe Taylor
0d535f24fb
Move the AA and CC diagnostic writes from jt9a() to decoder(). Add ndecodes to BB and CC.
2020-03-12 14:31:02 -04:00
Joe Taylor
199ff3dd3d
Experimental work-around for FT8 decoding on slow computers. Important changes:
...
- don't start function decode() is decoder is already busy
- send updated m_ihsym to jt9[.exe] via ss(1,1). Bill won't like this!
- jt9 bails out of the 41-buffer pass at m_ihsym=45.
2020-03-10 16:26:42 -04:00
Joe Taylor
431ec50212
Progress toward decoding at 41/47/50 buffers. Not yet complete!
2020-03-05 15:37:31 -05:00
