Commit Graph

1199 Commits

Author SHA1 Message Date
Joe Taylor
6d9ab6385c Many updates to User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-14 15:12:36 +00:00
Joe Taylor
d7b439a1e7 Change "WSPR-2" to "WSPR" everywhere; update some WSPR labels.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7181 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-14 14:15:34 +00:00
Joe Taylor
7ccef46ba0 Fix the broken "click-on-callsign" logic.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7178 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 21:32:30 +00:00
Joe Taylor
06ddf3c4f6 Sh and Tx6 checkboxes should be invisible if VHF not enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7176 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 20:28:02 +00:00
Joe Taylor
f670825d84 1. Display "best of N" rather than "average of N" in Wide Graph waterfall.
2. More fixes of widget visibilities.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7175 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 19:20:24 +00:00
Joe Taylor
328144f4fe For now, disable "Save Decoded".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7174 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 18:14:20 +00:00
Joe Taylor
a3410b1e02 Display Hot A/B and El in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7173 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 18:02:44 +00:00
Joe Taylor
443cbe1794 Switching VHF off in JT9 mode should make the submode spinner invisible.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7171 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 16:39:16 +00:00
Joe Taylor
1cc278cce6 1. Enable CW ID for fast modes.
2. Correct several more flaws in making GUI controls visible or invisible.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 16:19:24 +00:00
Joe Taylor
19a25a42ff Fix the bug connected with setting start of yellow click-to-decode line in Fast Graph.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7169 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 18:34:38 +00:00
Joe Taylor
995fcf5359 1. Gray-out "Include averaging" and "Include Deep Search" if not in JT4 or JT65 mode.
2. Make the "MSK144 Realtime decode" checkbox invisible, in preparation for removing it entirely.
3. Always use RealTime decoding in MSK144 mode.  (For now, at least, click-to-decode works as before.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 18:21:45 +00:00
Joe Taylor
f7ac6a732f Correct a flaw in display logic for cbFast9. Enable JT9-Fast decoding when MSK144 real-time decode is checked.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7166 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 17:09:36 +00:00
Joe Taylor
823b018592 Trying to make position and status of the central GUI controls correct and logical for VHF and non-VHF usage.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 16:33:18 +00:00
Joe Taylor
daf56b5186 Failed to save before commit. Fixed now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7162 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 17:52:48 +00:00
Joe Taylor
15eb4e2796 Adjust the handling of "Save Decoded". (It is correct, yet,for all cases?)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7161 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 16:51:50 +00:00
Joe Taylor
a8210b69ba Information message when list of files to open has been exhausted.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7160 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 16:35:34 +00:00
Joe Taylor
b1d53e1fad Fast modes: all decodes should go to ALL.TXT. MAK144: label the right text window "QSO Messages".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7157 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 15:23:37 +00:00
Joe Taylor
eebcdcd42a git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7155 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 2016-10-06 18:56:16 +00:00
Joe Taylor
ff25140273 git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7154 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 2016-10-06 18:55:11 +00:00
Joe Taylor
216259c71f Tx2 should use full calls, even with "Sh" checked in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7152 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-05 14:20:25 +00:00
Joe Taylor
bda40d5c5d Send MyCall, HisCall, and state of Sh checkbox to mskrtd, to enable MSK144 Sh messages with the realtime decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-04 14:01:02 +00:00
Joe Taylor
68e03f6c4e Another attempt to get both m_rptRcvd sent to log and valid spot sent to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7147 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 22:52:01 +00:00
Joe Taylor
6dcdee836e Further speed improvements for MSK144 RT decoding. Fiz what I broke in the "click-on-CQ-message" logic.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7144 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 17:08:02 +00:00
Joe Taylor
4895b5f8ba More complete definition of CPU usage for MSK144 RT decoding. Speed is back
to that of r7139.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 13:48:30 +00:00
Steven Franke
78652121fa MSK144 should auto sequence only when the box is checked.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7142 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 01:20:15 +00:00
Joe Taylor
eeac94e361 Don't send decodes from disk data to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:41:41 +00:00
Joe Taylor
672a4e88b5 MSK144 mode: minimum Ftol=20; report received copied to Log screen; spots sent to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:16:47 +00:00
Steven Franke
58b331b36b Make RxFreq step size 10 Hz in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 01:14:35 +00:00
Steven Franke
0173ea4d6d 1. Initialize m_msg[0][0] to stop garbage decode right after startup. 2. Decouple RxFreq spinbox from printed/decoded frequency. 3. Limit RxFreq to 25 Hz steps in the range [1400,1600] when in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7137 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 00:23:09 +00:00
Joe Taylor
8dc2fef844 Back out some changes that were broken. PSK reporter not yet functional for MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 20:10:46 +00:00
Joe Taylor
23785f60e4 Oops! Committed wrong versions. This code is not ready for use!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:40:26 +00:00
Joe Taylor
02ef8823ef 1. Allow Ftol down to 20 Hz in MSK144 mode.
2. Do not adjust Rx Freq automatically after an MSK144 decode.
3. Insert the Rcvd report in log window.
4. Send MSK144 decodes to PSK Reporter.

NB: not all these are fully tested, yet.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:32:16 +00:00
Steven Franke
4fe86cef1e Try to squash double-decodes and gibberish prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 18:13:39 +00:00
Joe Taylor
2ba4865d84 This should have been committed with r7121.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 15:55:53 +00:00
Joe Taylor
bee5ea4c71 Minor cleanup; add some !$OMP stuff to msk144sync.f90, but it's not yet functional.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7119 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 16:39:14 +00:00
Joe Taylor
cd0895c26a Add a performance monitor for real-time MSK144 decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 13:29:20 +00:00
Joe Taylor
57a5ad188d Send ndepth (value = 1, 2, or 3) to hspec(). MSK144 click-to-decode now calls
the old fast_decode(); probably it should call hspec() instead?


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 20:41:41 +00:00
Joe Taylor
6579b93690 Progress toward full implementation of real-time decoding of MSK144.
I believe file saving and auto-sequencing nor work.  Not sure about posting
to PSK reporter: please check.  


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7112 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 19:08:19 +00:00
Steven Franke
f210e47cd5 MSK144:
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines. 
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Steven Franke
3df371f11b New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-23 22:28:11 +00:00
Joe Taylor
3b97ae7417 Implement real-time decoding in MSK144 mode, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
Joe Taylor
68be179f34 Reconfigure mainwindow GUI properly after MSK144 -> WSPR -> MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7093 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 15:32:01 +00:00
Joe Taylor
c4d00b0f47 1. Display proper UTC on Fast Graph for files read from disk.
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 13:34:40 +00:00
Joe Taylor
b15e3aed04 when TRperiod < 30 s, expand the Fast Graph scale so full width is 15 s.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 14:18:40 +00:00
Joe Taylor
c8d795df0a Increase range of report spinbox in MSK144 to -8 --> +24 dB. Limit the yellow click-to-decode bar to max at TRperiod.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7084 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 17:06:49 +00:00
Joe Taylor
3b93cd02b6 Spinners fopr Rx Freq and Tx Freq should not have been made visible in MSK144 mode; they are ignored in this mode, as present.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7080 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 21:20:16 +00:00
Joe Taylor
13ffbb20eb Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00
Joe Taylor
6243f89c35 Make Rx Freq and Tx Freq spinners visible in MSK144 mode. (Tx Freq is disabled.)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7078 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:11:27 +00:00
Joe Taylor
7f039d57b4 Remove the arbitrary "-5 dB" from signal-meter readings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7077 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 12:51:34 +00:00
Bill Somerville
66eaf24af0 Add a configurations button to the rig error message box
This button pops up the same context menu as the configurations button
on the main window menu bar. This allows the operator to easily escape
from an incorrectly configured configuration without changing it.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7075 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:50 +00:00
Joe Taylor
73612cf6a5 Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:37:00 +00:00
Joe Taylor
05c19aecd2 Fix a bug intruduced in r7060 that prevented reading .wav files in fast modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7069 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 17:46:09 +00:00
Joe Taylor
2d9b729c6c Don't show the Auto Seq checkbox when it's not relevant.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7062 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 12:54:09 +00:00
Joe Taylor
1ecc3d7c01 Correct the m_hsymStop values for slow modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7060 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 19:00:55 +00:00
Joe Taylor
d3182f4161 Remove the "Robust sync" option.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 17:26:05 +00:00
Joe Taylor
ec281f93c4 Add a user control for Tx Delay, on the Advanced tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 23:18:48 +00:00
Joe Taylor
cbc4ef1b49 Change cbEME to cbAutoSeq (always). Protect against frequency jump in MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 15:36:17 +00:00
Joe Taylor
d99770d664 RO, RRR, 73 short messages apply only to JT65.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7056 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 14:01:28 +00:00
Joe Taylor
255b712602 Make Sh box visible and used in JT65 VHF-enabled mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 13:06:01 +00:00
Joe Taylor
1066dc2508 Don't allow naggressive > 0 unless VHF Features and Single Decode are both checked.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7054 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-05 17:33:07 +00:00
Bill Somerville
bdc8dd881c Now 6 digit locators are possible again add option to prefer type 1 WSPR messages
This  option, on  by  default, maintains  backwards compatibility  for
non-compound  callsign  holders.   If   switched  off  and  they  have
specified a 6 digit  grid then it will be sent in  the type 2 protocol
using two messages and a hashed callsign.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7053 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-03 23:33:13 +00:00
Steven Franke
ca19e977c0 Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7051 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-01 21:50:52 +00:00
Bill Somerville
d58a7e0311 Fix an issue with 6 character grids not being used in WSPR
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7042 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:02:01 +00:00
Bill Somerville
d2a191aca0 Clear the DX grid if the base call of the DX call changes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7040 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:46 +00:00
Bill Somerville
81ad76cacc Produce a warning message if the WSPR .c2 file cannot be written
Thanks to Mike W9MDB for this patch.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7039 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:38 +00:00
Bill Somerville
7350eb0892 Strip decode quality information from decoded messages before parsing by double click
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7037 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-29 17:01:22 +00:00
Joe Taylor
c8e340cf88 1. Correct the max length of MSK144 decoded text strings. Thanks Mike!.
2. Suppress rare QRA64 garbage decodes that contain "000AAA".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7033 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-16 19:17:45 +00:00
Bill Somerville
cc178ab6fa Create the splash screen before assigning the application name
Even  though the  splash screen  does  not have  a title  it seems  to
interfere  with JTAlert  which  enumerates window  titles to  identify
WSJT-X instances. I'm not sure why  this is necessary, but if it helps
it should be benign.

Ensure that the  splash screen is hidden before any  message boxes are
shown, this is essential  at startup if there is a  stale lock file or
rig control error.

Be far less aggressive about bringing  the splash screen to the top of
the application window  stack. This may cause the splash  screen to be
obscured on some platforms.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7025 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-12 16:12:52 +00:00
Steven Franke
f803c5cf6f Add new MSK144 encoding routines and make the necessary accommodations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7022 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-11 19:25:20 +00:00
Bill Somerville
afed56d008 Proper splash screen and release notes help menu link
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7007 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-06 13:52:14 +00:00
Joe Taylor
9684106dd7 1. Fix the nfqso < nf1 but in qra64.f90.
2. Delay splash screen until after main window starts.
3. Keep cbTxLock enabled in QRA64 mode.
4. Update v1.7_Features.txt.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7005 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-05 14:14:24 +00:00
Joe Taylor
9993760bac Re-enable MSK144 click-to-decode, top panel only.
Fix the improper display of "Fast" checkbox.
Disable "CQ nnn" checkbox if MyCall is not K1JT or K9AN.
Use AppDir as path to execute the LDPC encode program.
Don't display submodes in mode label for JTMSK, MSK144.
Make Rx Freq spinner invisible in MSK144 mode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7001 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 19:30:27 +00:00
Joe Taylor
5d68d2f1c8 Quantize short reports to 4 bits: -3 0 3 6 10 13 16 RRR 73.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6998 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 16:05:10 +00:00
Joe Taylor
dc7826d5ea Startup messge box for Alpha Release. New sigma limit in detectmsk40. Minor tweaks to GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 15:20:16 +00:00
Joe Taylor
b299c8d5ad For now, remove the restrictions on use of QRA64 and MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 20:40:49 +00:00
Joe Taylor
ab8b6d0383 Move ldpc temporary files into platform-independent location.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6991 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 19:04:21 +00:00
Joe Taylor
8159e2da50 Tentative and temporary change to encode MSK144 in a separate process.
NB: temporary files are being written to execution directory!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6989 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 15:34:42 +00:00
Joe Taylor
289ba66119 1. Fix cause of "frozen UTC" bug in MSK144 mode. (Could there be more than one cause?)
2. Fix failure to remember Ftol setting in MSK144 mode.
3. Remove obsolete controls from Advanced tab.
4. Add control for "x 2 Tone spacing" on Advanced tab.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-01 19:46:19 +00:00
Joe Taylor
5de024d9ba Correct the value of nsym for sending an MSK144 short message.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6979 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-30 20:20:54 +00:00
Joe Taylor
2cf32da1ea Change the MSK144 short-message frame size from 32 to 40 symbols.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6972 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-30 02:06:18 +00:00
Joe Taylor
2b6ff14e4b MSK144 fixes: Click on lower panel of Fast Graph decodes from previous file; clicking beyond available data does not crash program.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6964 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-29 16:10:55 +00:00
Joe Taylor
e432dc421a First good decode in submode QRA64D.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6961 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-28 15:18:06 +00:00
Joe Taylor
dbe0f7b099 During tests, at least, allow use of Tx Freq spinner with VHF features enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6943 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-23 14:59:25 +00:00
Joe Taylor
d1e23bdac8 Fix some potential bounds errors in setting frequency limits. Implement submodes QRA65B-E on the Tx side.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6942 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-23 13:22:34 +00:00
Steven Franke
a0231e1417 Fix QSY message when answering CQ nnn.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6933 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-20 23:42:20 +00:00
Joe Taylor
ef217b9dce When auto-sequencing, don't change Tx msg if we're calling CQ and receive a 73.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6919 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 17:50:28 +00:00
Joe Taylor
a48af8057b Add callsigns to temp list.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6918 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 17:19:18 +00:00
Joe Taylor
9544f60b5a Implement "pick to decode" on the MSK144 horizontal waterfall.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6917 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 17:06:52 +00:00
Joe Taylor
715d526601 In MSK144 mode, restrict the range of Ftol to values 50, 100, 200.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6915 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 15:18:55 +00:00
Joe Taylor
596b62b37e Fix a defect that could cause mis-naming a .wav file in fast modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6914 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-14 14:22:05 +00:00
Joe Taylor
4f0cfd6800 Max report in MSK144 is now +24 dB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6913 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 23:13:42 +00:00
Joe Taylor
b7d4b277aa Replace the "+" sign in display of positive dB reports.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6912 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 20:32:48 +00:00
Joe Taylor
97b987f77f Reports in MSK144 mode are even numbers between -4 and +24 dB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6910 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 20:05:56 +00:00
Joe Taylor
857388722d When MSK144 message is changed between long and short format, must inform Modulator.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6909 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-13 19:17:47 +00:00
Joe Taylor
211f8ba291 Save/Restore status of Sh box. Limit range of auto-generated short-message
reports to -4 to +10 dB.  Include +/- sign in all reports.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6907 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-12 15:45:27 +00:00
Bill Somerville
feb7b2751f Fix regression in azimuth display on main window
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6906 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-11 23:35:24 +00:00
Bill Somerville
c586204d75 Add proper Qt validation for callsigns and grids
Two      new     validator      classes     CallsignValidator      and
MaidenheadLocatorValidator   are   introduced    and   used   in   the
Configuration and MainWindow implementations.

MaidenheadLocatorValidator  supports  different  lengths  and  minimum
required  lengths  with  a  default of  subsquare  with  square  being
required.

The  message_aggregator  application has  been  enhanced  to show  the
current DX call and DX grid as shown in the WSJT-X main window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-10 22:20:30 +00:00
Bill Somerville
396dd6d491 Furter attempts to get the Tx watchdog and its UDP Status Message right
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6901 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-09 18:35:25 +00:00
Bill Somerville
e7e5e3f340 Further Tx watchdog refinements
This should allow receivers of UDP Status messages to accurately track
the Tx watchdog status. Also some defects in the Tx watchdog logic are
repaired.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6900 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-09 02:27:57 +00:00
Bill Somerville
46ff34a04a Refactor a poor variable name
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6898 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 20:45:45 +00:00
Bill Somerville
aa88b067fb Don't increment watchdog timer in WSPR modes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6897 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 20:45:33 +00:00
Joe Taylor
874204dfe9 Another attempt at optimizing the red sync curve for QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6895 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 15:22:50 +00:00
Joe Taylor
6d2e974b8d Call the MSK144 short-message decoder only if "Sh" is checked. Also,
make ntol available to the MSK144 decoder.  


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6894 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 14:42:28 +00:00
Bill Somerville
73ac2ebc39 Add Tx watchdog status to UDP Status message
Thanks to Mike W9MDB for contributing this patch.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6892 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 10:25:21 +00:00
Joe Taylor
807d5e595b Commit most of what's necessary for decoding MSK144 short messages, including
the hash test.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6889 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-07 20:15:01 +00:00
Joe Taylor
ea3ec805ab Fix typo.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6884 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-07 00:17:47 +00:00
Joe Taylor
005e022ece Two more testers.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6883 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-07 00:11:41 +00:00
Bill Somerville
21aa890607 Ensure all main window child widgets are added to teh event filter
This makes  all child widgets able  to reset the Tx  watchdog by mouse
click or key press.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6881 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-06 20:16:38 +00:00
Steven Franke
ccbf3a9896 Define the length of short msk messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6879 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-06 19:11:03 +00:00
Joe Taylor
ebf391a528 Start GUI mods to enable short messages in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6877 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-06 15:06:47 +00:00
Joe Taylor
77e295d36d Plot a red "sync" curve in QRA64 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6876 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-06 14:18:23 +00:00
Bill Somerville
18871acc02 Fix minute timer
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6864 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-04 02:31:50 +00:00
Bill Somerville
3f1ea9d10c Make message boxes more platform independent with a wrapper
Instead  of  using the  Qt  QMessageBox  class  directly a  new  class
MessageBox  (MessageBox.hpp)  has been  added  to  deal with  platform
independence issues like the title not being shown on Mac OS X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-03 20:31:19 +00:00
Joe Taylor
eb77d3d65a One more rename, QRA02 --> QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6850 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 13:06:41 +00:00
Joe Taylor
3016ccee01 Many renames: QRA65 --> QRA64, QRA02 --> QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 12:15:41 +00:00
Bill Somerville
23e4f34612 Switch to status bar notification of runaway Tx watchdog
Rationalize the status bar construction and maintenance.

Ensure that incoming UDP Reply messages reset the watchdog.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6847 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 00:25:38 +00:00
Joe Taylor
6cbb45bc1f Correct the green marker in QRA mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6846 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 15:41:03 +00:00
Bill Somerville
82b8b99458 Keep compliance back to Qt 5.2
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6842 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 13:22:56 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 11:36:59 +00:00
Joe Taylor
0384d312a6 Temporary mode QRA02 is now basically functional (though buggy).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6833 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 20:38:36 +00:00
Bill Somerville
c864766332 Ant mouse press or key press in the main window resets the Tx watchdog
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6831 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 16:25:47 +00:00
Joe Taylor
9870af6b2e Some progress in QRA01 --> QRA02. Correct minor flaws in mode setting and plotter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6829 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 12:46:14 +00:00
Bill Somerville
b19e329ce2 Alert using the platform desktop mechanism for messages
Message boxes and  accepted incomming UDP actions alert  the user even
if the  application is hidden.  This does not  steal focus as  that is
considered bad practice and is annoying.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6826 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-29 23:11:54 +00:00
Joe Taylor
100c3d3121 More changes for QRA01 --> QRA02.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6825 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-29 19:12:46 +00:00
Joe Taylor
ac77a0a5de Add KI7MT to list of "enable" calls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6813 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-28 16:14:06 +00:00
Bill Somerville
4c4b182b72 Allow for empty decode message in UDP reply message
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6812 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-28 15:53:50 +00:00
Joe Taylor
0943567625 Add Tx capability for QRA01.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6811 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-28 14:56:02 +00:00
Bill Somerville
db820683ff Fix a regression in WSPR saved file names from r6806
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6807 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 17:31:25 +00:00
Bill Somerville
c69bfee149 Fast mode audio recording behaves the same way as slow modes
Fixed naming of fast recording files.

Tidied some signal/slot plumbing in the fast plotter.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6806 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 17:01:51 +00:00
Joe Taylor
529ad6eec9 First functional decoder for QRA01.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6805 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 14:36:03 +00:00
Joe Taylor
f146375dd0 More flexibility in QRA65code, including simple S/N simulations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6802 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-23 13:58:18 +00:00
Joe Taylor
9c19ff3eea Making progress on what will become QRA65 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6794 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-22 20:26:41 +00:00
Bill Somerville
2beef948d9 Adaptive sample block size to match FFT sizes
This  change  corrects timing  discrepancies  on  the horizontal  fast
spectrum plot.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-17 01:27:00 +00:00
Bill Somerville
e7854d6c5b Do not apply reference spectrum in fast modes
Using the reference spectrum discards a short part of the front of the
period's received samples which may have contained a decode candidate.

As  far  as  the  MSK  modes  are  concerned  the  reference  spectrum
correction is probably not applicable anyway.

Comment from Steve K9AN after offline discussions about this:

"In any  case, I  don’t think that  there is any  reason to  apply the
reference spectrum correction to the MSK modes. I do think that we are
paying a  performance penalty  in the MSK  modes for  non-ideal filter
responses at  the TX and RX  ends of the link  — but we would  need to
implement an  equalizer that  looks at  the received  sync words  as a
“training  sequence” in  order to  come  up with  anything that  could
improve the  results. This  would take into  account the  receiver and
transmitter  filters,  and  would  probably  be  different  for  every
TX/RX/meteor burst. My current thinking is  that for the low SNRs that
we are most interested in, and with  the short sync words that we use,
we  wouldn’t  be  able  to  do  a very  good  job  of  estimating  the
coefficients of the equalizer..."

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6776 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-13 19:52:23 +00:00
Bill Somerville
ba4cfb2311 Another uninitialized variable picked up by valgrind MemCheck
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6766 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-11 23:53:18 +00:00
Bill Somerville
282459b665 Clean up some memory leaks
Move the  FFTW3 cleanup  into the  main routine as  it should  only be
called  once rather  than  every time  the  settings configuration  is
changed or reset (MultiSettings).

Call the new fini_ldpc_ routine before  exiting in the main routine to
free the LDPC resources.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6764 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-11 18:50:57 +00:00
Bill Somerville
c2a73723e0 Fix some initialization order issues introduced in r6755
These include the wide graph window not being suppressed when starting
the application in a fast mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6762 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-11 18:50:41 +00:00
Bill Somerville
829dc3ec57 Make sure tune power tool tip only shows when adjusting the tune power using the UI
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6761 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-11 18:50:34 +00:00
Bill Somerville
c7344e0441 Another, hopefully final, fix for saving decocded WAV files reliably
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6757 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-10 22:59:41 +00:00
Bill Somerville
8e43af11e5 Fix numerous memory leaks and uses of uninitialized variables
These were discovered when running under teh valgrind MemCheck tool. I
have also  checked in a suppressions  file (wsjtx-valgrind.linux.supp)
suitable for use on Linux when running the valgrind MemCheck tool.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-10 15:54:16 +00:00
Bill Somerville
66c390de79 More consistent highlighting and processing of general call messages
Highlight,  in the  CQ  colour, CQDX  ... and  QRZ  ...  messages  and
process correctly for worked before and DXCC entity.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6753 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 23:39:48 +00:00
Bill Somerville
7be033e8c2 Report WAV file reading and writing errors
Refactor the  save WAV  file routine  to return an  error string  as a
promise and then get that result and report in a QMessageBox.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6752 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 23:39:41 +00:00
Joe Taylor
df518f4e1d Make it possible to find MSK144 code-definition files in the "data_dir" on all platforms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6747 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 15:06:15 +00:00
Joe Taylor
143736129b Starting to implement the hooks for interfacing to QRA mode.
Pass file path for peg-128 files to fast_decode().  (Inelegant, but it works.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-08 21:20:58 +00:00
Joe Taylor
ecd36a33b5 Starting what's needed to pass data_dir to fast_decode(). I need help!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6740 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-08 19:49:50 +00:00
Bill Somerville
a6be978915 Ensure that tune specific Tx gain setting is not restored after it is cleared
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6733 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-05 19:24:56 +00:00
Joe Taylor
6eb55cee68 No short messages (yet?) in MSK144 mode. Max message length = 80. Don't
try to remove a noexistent file.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6722 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-03 18:20:53 +00:00
Joe Taylor
9845494276 Install MSK144 as a new mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6721 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-03 15:45:54 +00:00
Bill Somerville
b49999f96d Fix close down semantics and suppress subprocess errors during close down
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6705 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-26 23:40:16 +00:00
Bill Somerville
3ec6d211c8 Extend UDP status message - added Rx/Tx DF, call and grid information
Build now creates and installs a  UDP library that contains the server
side  of the  UDP messaging  facility.  This  library is  used by  the
udp_daemon and message_aggregator reference  examples. The new library
is  currently a  static archive  but  can also  be built  as a  shared
library.  The library  allows third  party Qt  applications to  easily
access UDP messages from WSJT-X.

Refactored  the  message_aggregator  reference example  to  split  out
classes into  separate translation  units. Added new  functionality to
exercise  the  new  UDP  status fields,  highlight  own  call,  CQ/QRZ
messages and decodes near Rx DF.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6691 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-24 10:08:35 +00:00
Joe Taylor
d865186de3 JT4 end-of-line flag "f*" is now properly displayed in the Avg Msg window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6690 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-23 20:34:01 +00:00
Joe Taylor
1531f3ad3b New format for end-of-line flags in JT4 and JT65; starting work on
establishing sync in JT4.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6685 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-19 16:13:51 +00:00
Bill Somerville
21283cd475 Message averaging window fonts controlled by configuration
Use the decoded text font for the message averaging window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6684 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-18 23:22:24 +00:00
Bill Somerville
a63e906cbb Do not access ui widgets after the UI has been destroyed
During  orderly close down  the UI  can  be destroyed  while Rx  audio
blocks are  still being  delivered. Therefore the  UI pointer  must be
checked  in MainWindow::datasink  before attempting  to access  the UI
widgets.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6683 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 20:45:40 +00:00
Bill Somerville
22a9195326 Allow for extra character after mode when matching UDP reply to CQ messages
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6682 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 20:45:32 +00:00
Bill Somerville
f398495cfc Allow for, and add where necessary, a second character after mode
The decoded message processing relies on fixed column positions so the
extra character used in message  averaging to indicate sync flips must
also be allowed for in other modes.  This is done by inserting a space
character.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6681 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 19:35:38 +00:00
Bill Somerville
cc8d2130c6 Improved subprocess handling and error reporting
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-07 19:32:52 +00:00
Bill Somerville
a45ea3cdff Adjust decodes displays and processing for extra csync indicator after mode
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 18:53:00 +00:00
Bill Somerville
2c7ae5f9de Pass sensible default min sync to decoders if spin box is not visible
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 18:52:47 +00:00
Bill Somerville
7c2ededab6 Do not act on double clicks of empty decode window lines
Tx period was erroneously being forced to odd/2nd.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6670 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 01:32:16 +00:00
Bill Somerville
080f7ef1a2 Make mutable static variables instance variables where necessary
Static storage variables that should  have been class members are made
so. This  ensures that  if they  are used  as initialization  one time
switches   then  they   will  operate   correctly  when   their  class
instantiated more than once. This now happoens for most classes due to
the configurations  switching facility which destroys  all windows and
re-instantiates them.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6661 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-01 00:40:51 +00:00
Joe Taylor
5bf1a0dcf0 Make sure the "Fast" checkbox becomes visible after enabling VHF/UHF
features on the Settings | General tab.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6652 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-28 15:06:32 +00:00
Bill Somerville
1cae0b8aa9 Move temporary directory creation and deletion outside of MainWindow
Changing configuration causes  WSJT-X and JTAlert to get  into a fight
for the temporary directory. By moving the creation and clearup of the
temporary directory outside  of the configurations loop  this issue is
minimized to no worse than before multiple configurations were added.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 21:59:22 +00:00
Bill Somerville
e6c59a42b5 Ensure that WSPR band hopping is disabled when Rig is None
Also added  a new configuration query  method to check if  Rig is None
i.e. a dummy rig.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6629 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 20:22:23 +00:00
Bill Somerville
3b46e140af Disable Internet spotting when rig control is not working
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6628 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-20 19:33:33 +00:00
Bill Somerville
119a98f99a Disable WSPR band hopping on rig failure before showing error message
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6626 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-19 13:50:05 +00:00
Bill Somerville
4cebdddfe5 Add multiple configurations navigation and management
Multiple configurations  are accessed and  maintained from a  new main
window menu bar  pop up menu "Configurations". The  prior settings are
the  "Default"  entry. New  configurations  may  be added  by  cloning
existing ones.  Maintenance  and navigation is via sub  menus for each
configuration.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-17 23:39:12 +00:00
Joe Taylor
c7dfc1ee00 1. Protect against wrong ID of f0 being fit by lorentzian(), when Ftol is large.
2. When switching to JT65 mode, go through JT9 first.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6621 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-14 13:22:05 +00:00
Joe Taylor
3aca283554 In single-decode mode, treat "Aggressive decoding level" as 1 if set to 0.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6620 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-13 13:52:45 +00:00
Bill Somerville
8d13c8e1ff Restore double click on decode behaviour broken by disable Tx DF spin box
The changes  to fix the  Tx DF  at 1000Hz when  VHF & up  features are
enabled had an undesirable side effect of disabling double clicking on
decodes  because  this was  disabled  by  the  Tx  DF spin  box  being
disabled. The  Tx DF  spin box  being disabled  in VHF  & up  mode may
change but this change fixes this issue regardless.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6617 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-12 22:07:14 +00:00
Joe Taylor
90beb50cbe 1. Add AGC for waterfall in *Ref Spec* mode.
2. Don't display orange warning bar when in WSPR mode.
3. Fix a longstanding compiler warning.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6616 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-12 19:54:15 +00:00
Bill Somerville
38cf525969 Use fixed 1000Hz Tx DF in VHF & up QSO modes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6610 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-11 23:29:29 +00:00
Bill Somerville
4350c682ec More consistent checks for WSPR modes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6609 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-11 23:29:21 +00:00
Joe Taylor
b843894061 First working code offering optional computation and use of a reference
spectrum.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6608 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-11 20:53:54 +00:00
Joe Taylor
50cbdbb807 More work toward a usable reference spectrum.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6603 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-08 20:03:29 +00:00
Joe Taylor
23298c1743 Rename refspec() to refspectrum().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6601 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-08 15:55:28 +00:00
Joe Taylor
88e47a5941 Working on implementing reference spectra.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6600 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-08 15:23:32 +00:00
Joe Taylor
da098e4a76 Starting to implement accumulation of reference spectrum.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6598 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-07 20:02:32 +00:00
Bill Somerville
2cfbb15b4f Rig control overhaul to implement generic Doppler shift tracking
The  concept of  a nominal  receive  and transmit  frequency has  been
introduced. This is  used as a base frequency  for Doppler correction,
frequency setting  and reporting. The  start up frequency is  now zero
which is  updated by the first  rig control status report.  This needs
more  work to  accommodate  calling frequency  plus working  frequency
operation as is used for random MS operation etc..

The  main  window  frequency  display  now  shows  the  transmit  dial
frequency while transmitting.

The mode changing logic sequence has been changed such that the rig is
correctly put  into and  taken out  of split mode  as required  by the
target mode.  This also  avoids the "other"  VFO having  its frequency
changed when  entering a mode that  does not use split  operating like
WSPR.

The main window  band combo box edit  may now be used to  input an kHz
offset  from the  current MHz  dial  frequency. This  is intended  for
setting  a sked  or working  frequency on  the VHF  and up  bands. For
example the working frequency for 23cms  might be set to 1296MHz and a
working  frequency of  1296.3MHz would  be selected  by selecting  the
23cms band  with the combo box  drop down list and  then entering 300k
into the band combo box edit widget.

When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such  that the frequency  clicked on  becomes the Tx  and Rx
frequency using  the fixed 1000Hz  DF that  JT4 modes use.   This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF  for both Tx and Rx and therefore
one  can "net"  to an  off frequency,  but visible  on the  waterfall,
caller with one click.

Improvements to OmniRig  rig control including use of  the serial port
control lines RTS or DTR, on the  CAT serial port used by OmniRig, for
PTT control.

Incrementing transaction sequence numbers added to messages to and from
the rig control  thread. This enables round trip status  to be tracked
and associated with a request. For  example a command that might cause
several  asynchronous  status  updates  can  now  be  tracked  in  the
originating thread such  that it is clear which updates  are caused by
executing the  request. This in turn  allows updates to be  held until
the request is complete i.e. the  state is consistent with the results
of the request.

Messages  to the  rig control  thread are  now posted  as a  new state
(Transceiver::TransceiverState) object. The  rig control thread tracks
requests and  actions any differences  between the prior  requests and
the new state.

The rig  control thread is now  stored on the  heap so that it  can be
closed down  and released as needed.  Along with this the  rig control
close  down  semantics  are  better defined  avoiding  some  potential
deadlock situations.

If the rig  is placed into split  mode it will be  reverted to simplex
mode when the rig connection is closed.

When  using direct  rig control  via Hamlib,  rigs that  have A/B  VFO
arrangements and  no method to query  the current VFO like  many Icoms
and  the Yaesu  FT-817/857/897(D)  series now  have smarted  frequency
updating requiring no  VFO changes when changing  the frequency.  This
is particularly  important when doing  Tx Doppler correction  to avoid
glitches.

The implementation  of emulated  split operating  mode ("Fake  It") is
simplified and improved.

A dummy  Hamlib transceiver for PTT  control on a separate  port is no
long instantiated if CAT or VOX PTT control is selected.

The resolution and  any rounding of the rig CAT  frequency set and get
commands is determined automatically  upon opening the rig connection.
This is needed to determine the  rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.

Frequency  calibration is  calculated separately  for the  receive and
transmit frequencies.

Whether  the  rig  modulation  mode  should be  controlled  is  now  a
constructor  argument rather  than  being passed  with individual  rig
control requests.

Doppler  shift  correction  is   considerably  enhanced  with  simpler
controls and much  better rig control.  A new mode  of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via  CAT  when transmitting.   Such  rigs  have a  Doppler  correction
calculated  for the  middle of  the next  transmit period  just before
transmission starts. While  using Doppler tracking it  is now possible
to adjust the  sked frequency either using the new  kHz offset feature
of the main  window band combo box  or by directly tuning  the rig VFO
knob while holding down the CTRL key.

The astronomical data window that includes Doppler tracking control is
now opened  and closed using a  checkable menu item to  avoid it being
accidentally closed.

Debug  configuration  rig  control  diagnostic  messages  now  have  a
facility argument for clearer and more standardized trace messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
Joe Taylor
bcdd28a038 Add markers for RO RRR 73 messages on the Wide Graph scale.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6557 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-24 16:46:52 +00:00
Joe Taylor
33581198e6 1. Generate shorthand JT65 messages for RO, RRR, 73.
2. Fix background colors for special message types.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6556 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-24 15:44:48 +00:00
Joe Taylor
3e091fca99 Improved GUI control and display of averaged and hinted decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6548 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-22 14:12:59 +00:00
Joe Taylor
846ddf9039 1. Clean up GUI features releted to message averaging and deep search.
2. Make averaging and DS separately selecteble.
3. Clear nftt and avemsg on Clear Avg.
4. Allow fer65 to handle message averaging.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6543 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-21 16:03:11 +00:00
Joe Taylor
331402213a Several changes for single-decode behavior:
1. Use "f" to flag FT decodes, 'h' for hinted decodes.
2. Let "Experience-based" checkboxes activate hinted decoding.
3. Singls-sequence decodes go to left window, average decodes to right.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-20 19:32:08 +00:00
Bill Somerville
e02dc28ce2 Fix compiler error on 64-bit systems
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6523 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 21:54:33 +00:00
Bill Somerville
ab52a7f0ea Tidy up WAV file reading and fix WAV input rate conversion defect
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6521 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 19:48:54 +00:00
Joe Taylor
80873a6040 Implement "Single decode" logic; write to "avemsg.txt" in jt65_decode;
list the correct UTC in decoded text line when using the "Decode" button.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6519 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 18:35:41 +00:00
Joe Taylor
697886465d Fix a bug in read_wav_file() that made it process and return too few
data points when files with sample rate 11025 Hz are read.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6518 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 16:36:31 +00:00
Joe Taylor
dfb8dc7422 Add a "Single decode" checkbox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6516 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-10 15:13:06 +00:00
Joe Taylor
a0318d3a0a Calibration of the "Degrade S/N of .wav file" requires knowledge of receiver bandwidth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-23 19:37:38 +00:00
Bill Somerville
1ec6d07e8f Fix regression when reading WAV files
Decoder needs the number of samples not the number of bytes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6489 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-23 18:28:37 +00:00
Joe Taylor
764e2f95d5 Fix up message generation when short messages are used and decoded.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6466 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-04 17:30:04 +00:00
Joe Taylor
cca53ff18a Remove diagnostic prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-04 16:12:25 +00:00
Joe Taylor
1ee6659101 Further improvements to decoder for short JTMSK messages.
In mainwindow.cpp, return after executing call to fastSink().  ###???###


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6464 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-04 16:10:55 +00:00
Joe Taylor
95a3c00eda Pass naggressive to fast_decode(). Display <...> messages only if naggressive>0.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-03 20:23:52 +00:00
Bill Somerville
dc69144396 Better debug messages for WSPR spotting issues
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6460 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-02-02 18:28:12 +00:00
Joe Taylor
adb10ebfa7 Enable generation of JTMSK short messages and reports.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6421 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-22 18:10:39 +00:00
Joe Taylor
a74d000c32 Correct the Tx message length and adjust reported SNR for short JTMSK messages.
Commit some things omitted last time.   


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6420 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-22 17:06:57 +00:00
Bill Somerville
16cec2e7df Fix another CLang++ warning
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6410 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-20 20:50:24 +00:00
Joe Taylor
e1ceeb6d12 Adjust the GUI to accommodate JTMSK shorthand messages. (NB: Tx message
echoed with yellow background is incomplete.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6403 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-01-15 21:53:27 +00:00