Steven Franke
f2266c3c54
1. subtractft8: on the last call to sqf, don't need to do the long FFT.
...
2. mainwindow.cpp: based on the time when <DecodeFinished> is received, calculate
mswait to try to place the killFile time at 0.75*m_TRperiod.
2020-03-06 11:06:44 -06:00
Joe Taylor
f367b6d6b9
Temporary version: decode call at 47 buffers only does subtractions.
2020-03-06 10:38:24 -05:00
Joe Taylor
431ec50212
Progress toward decoding at 41/47/50 buffers. Not yet complete!
2020-03-05 15:37:31 -05:00
Steven Franke
6773768586
Clean up the timestamp adjustment logic, and make the threshold 0.5*TRperiod.
2020-03-05 11:25:49 -06:00
Steven Franke
cb687c7034
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-03-05 11:17:03 -06:00
Steven Franke
07c753e284
Make ALL.TXT Rx timestamp equal to the beginning of the TR period, even if the decode comes in after the start of the next TR period. Make Tx timestamp the actual time that Tx started.
2020-03-05 11:16:56 -06:00
Joe Taylor
cd9efc54ea
Correct the reported value "ndecoded" for FT8 mode.
2020-03-03 15:18:25 -05:00
Joe Taylor
02eb4fe90b
Use a table lookup for exp(i*phi) in gen_ft8wave.f90.
2020-03-03 12:40:27 -05:00
Steven Franke
761ee1cd85
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-29 13:47:09 -06:00
Steven Franke
037805ca8f
Improve dt estimation in ft8b so that dt refinement procedure in subtractft8.f90 can be done with 4 calls to sqf instead of 7.
2020-02-29 13:46:59 -06:00
Joe Taylor
6c1efac576
Once more, to get the <DecodeFinished> behavior right for realtime monitoring as well as data from disk.
2020-02-28 15:45:51 -05:00
Joe Taylor
8e7a56634b
Set nearly=41; don't write <DecodeFinished> after the early decode pass.
2020-02-28 15:03:39 -05:00
Joe Taylor
f9322f2b43
Add calls to timer() around calls to subtractft8().
2020-02-28 11:25:32 -05:00
Joe Taylor
2e696574c9
Add a TIP about *Alternate F1-F6 bindings* to User Guide.
2020-02-28 11:24:24 -05:00
Steven Franke
877878ea88
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-27 09:10:27 -06:00
Steven Franke
403904089e
Re-arrange the fields in the ALL_WSPR.TXT file.
2020-02-27 09:10:17 -06:00
Joe Taylor
b9888a09ff
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-26 13:16:12 -05:00
Joe Taylor
6afff5821e
Correct the times written to ALL.TXT when decode occurs after the T/R boundary.
2020-02-26 13:15:22 -05:00
Joe Taylor
00210d1141
Minor code cleanup in subtractft9.f90.
2020-02-26 13:14:49 -05:00
Steven Franke
478fd74e84
Remove reference to obsolete file ft8.f90 in CMakeLists.txt.
2020-02-25 17:06:36 -06:00
Steven Franke
1dde5fdd6c
Fix a minor bug in the unpk_ routine that was introduced in the last commit.
2020-02-25 15:28:57 -06:00
Steven Franke
38bac5e335
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-25 10:56:22 -06:00
Steven Franke
0ca6cbb575
wsprd: improve decoding and reduce the number of false decodes
...
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
2020-02-25 10:48:38 -06:00
Joe Taylor
65fda32a05
Previous commit was in error. This is the best-performing subtractft8.f90.
2020-02-25 09:04:18 -05:00
Joe Taylor
ff46c5a0c4
In subtractft8.f90: refine DT for early decodes before subtracting them from dd().
2020-02-24 16:18:42 -05:00
Joe Taylor
1d159a18c7
More cleanup to satisfy fussy gcc 10 compiler.
2020-02-21 13:36:49 -05:00
Joe Taylor
adb7dfcac3
Satisfy fussy compilers like gcc 10: Type mismatch between actual argument at (1) and actual argument at (2)
2020-02-21 09:52:20 -05:00
Joe Taylor
2a92ab903e
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-17 14:53:41 -05:00
Steven Franke
ac1d0f837d
Comment out diagnostic write statement.
2020-02-17 10:56:47 -06:00
Steven Franke
20b942b802
FT8: Add an experimental 4'th bit metric. Make dupe removal unconditional.
2020-02-17 10:53:52 -06:00
K9AN
207fd05f9f
Minor simplification - remove unnecessary nint() functions in get_spectrum_baseline.f90
2020-02-14 16:54:56 -06:00
Joe Taylor
ecb09ba852
Revert "Send "<DecodeFinished>" for FT8 only after the full-length decoding pass."
...
This reverts commit 364db768dbdd7306c408d94e450f8a6e87d6cfeb.
2020-02-14 17:44:46 -05:00
Joe Taylor
de4bbbc59a
Revert "Send "<DecodeFinished>" for FT8 only after the full-length decoding pass."
...
This reverts commit 364db768dbdd7306c408d94e450f8a6e87d6cfeb.
2020-02-14 16:33:16 -05:00
Steven Franke
09b47b0e8e
Change lower limit of analysis window from 200 Hz to 100 Hz.
2020-02-14 15:28:16 -06:00
Joe Taylor
364db768db
Send "<DecodeFinished>" for FT8 only after the full-length decoding pass.
2020-02-14 11:49:07 -05:00
Joe Taylor
e25696f4e3
Enable early+normal decoding for FT8 data read from disk, within WSJT-X.
2020-02-14 11:16:54 -05:00
Joe Taylor
cf6ee661ab
Fix two bugs (thanks Steve!); add early-decode logic to jt9[.exe] from command line.
2020-02-14 10:15:37 -05:00
Joe Taylor
2823cc3e85
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-13 15:34:09 -05:00
Steven Franke
e936a863a8
Fix some bugs related to osd decoding in msk144 and disable it for now.
2020-02-13 14:25:36 -06:00
Joe Taylor
4a4864d2ae
FT8 early decoding is now working.
2020-02-13 15:05:37 -05:00
Steven Franke
08baa50a01
Experimental change to enable OSD decoding for MSK144 when ntol .le. 50 Hz
2020-02-13 08:48:51 -06:00
Steven Franke
cf07d478ac
Some repairs and tweaks to development-related programs in fsk4hf directory.
2020-02-09 16:13:52 -06:00
Steven Franke
e9160f3c2f
Make ldpcsim174_91 work again. Scale SNR2500 assuming coherent BPSK, same Eb as FT8.
2020-02-08 14:49:21 -06:00
Steven Franke
9dd7e3f8c3
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-03 10:49:09 -06:00
Steven Franke
ff109a60ca
Implement AP decoding for Hounds when Fox has a compound call with standard base call.
2020-02-03 10:48:51 -06:00
Bill Somerville
68893d4fe9
Tidy formatting
2020-02-01 23:56:35 +00:00
Bill Somerville
f769f179c8
Remove std::hash<QString> specialization for Qt >= 5.14
2020-02-01 23:55:18 +00:00
Steven Franke
1a8ef22923
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-01-27 09:56:21 -06:00
Steven Franke
96ad947a37
Implement decode quality metric for FT4.
2020-01-27 09:55:34 -06:00
Joe Taylor
737ffb39d8
Add a Python script for converting all.txt to Cabrillo.
2020-01-24 16:07:54 -05:00
