Steven Franke
b194cc1a14
FST4: Do not bail out of blanker loop after 1st decode.
2021-02-18 14:26:56 -06:00
Bill Somerville
332ecfebf8
Leave global FFTW3 clean up to main programs
2021-01-26 21:35:13 +00:00
Steven Franke
2335575436
FST4/W: Disable envelope shaping at start and end of transmission when environment variable FST4_NOSHAPING=1. Works for fst4sim too.
2021-01-25 15:52:07 +00:00
Bill Somerville
b741eb761e
Implement the promised wsprd default data directory if accessible
2021-01-12 01:04:15 +00:00
Bill Somerville
607a346cf1
Add new function needed for FST4W decoder updates
2021-01-04 15:35:32 +00:00
Steven Franke
0013b15120
Remove some debug code.
2021-01-04 15:00:05 +00:00
Steven Franke
46222c61ed
Add rudimentary sanity checks to the values parsed from FST4W_ALSO_FST4.
2021-01-04 15:00:05 +00:00
Steven Franke
41f587c240
Fix a conflict between noise baseline percentile level and noise blanker percentage. Both were using the npct variable. Add an option for an FST4 pass when in FST4W mode.
2021-01-04 15:00:05 +00:00
Steven Franke
0fef0cc6e6
Minor formatting change in fst4_decodes.dat.
2021-01-04 15:00:04 +00:00
Steven Franke
a38b48d13d
Minor format change for nutc in fst4_decodes.dat.
2021-01-04 15:00:04 +00:00
Steven Franke
a657ce29a7
FT8: Make nagain work.
2021-01-04 15:00:04 +00:00
Steven Franke
41297e8761
FT8: Commit the rest of the fix for the nagain crash.
2021-01-04 15:00:04 +00:00
Steven Franke
b51bda4806
FT8: Fix jt9 crash when nagain is invoked.
2021-01-04 15:00:04 +00:00
Steven Franke
4081be94e1
Avoid a possible of bounds error. Compute some more decode diagnostic data.
2021-01-04 15:00:03 +00:00
Steven Franke
fb7b751e6d
Remove hmod from command line parameters for fst4sim.
2021-01-04 15:00:03 +00:00
Steven Franke
701d517e6e
For fst4sim, use Lorentzian fading spectrum when fspread is negative.
2021-01-04 15:00:03 +00:00
Steven Franke
b087328fc1
Don't waste time on excess BP iterations when doing K=50. Decode a little deeper.
2021-01-04 15:00:03 +00:00
Steven Franke
8079d35561
Append decoder data to file fst4_decodes.dat instead of overwriting.
2021-01-04 15:00:02 +00:00
Steven Franke
89cbd177df
If file decdata is present in the data directory, then write detailed decoder data to file fst4_decodes.dat in the same directory.
2021-01-04 15:00:02 +00:00
Steven Franke
812bd29e54
FST4W: Use K=66 for first OSD decode attempt and for updating fst4w_calls.txt. Use K=50 for 2nd attempt.
2021-01-04 15:00:02 +00:00
Steven Franke
fc3e24f696
More work on K=50 decoding.
2021-01-04 15:00:01 +00:00
Steven Franke
65ff3ce05e
Remove some debug prints.
2021-01-04 15:00:01 +00:00
Steven Franke
11b7aa9429
Implements decoding of FST4W messages as (240,50) crc-less codewords.
...
By cascading the full 24-bit crc generator matrix with the (240,74) LDPC code generator, create a (240,50) generator that is used to decode with approximately 1 dB better sensitivity than the (240,64) with 14-bit CRC approach that is normally used. This approach treats the CRC bits as additional parity bits and provides no means for identifying incorrect codewords. All codewords on the list generated by the OSD algorithm have CRCs that match the CRC of the message payload. Codewords are validated by unpacking the message and comparing the unpacked message with the list of stored callsign/grid pairs stored in the fst4w_calls.txt file.
2021-01-04 14:59:56 +00:00
Bill Somerville
ac6a6d0cd7
Fail wsprd if data directory specified not accessible
...
Also fixed trivial memory leak on error exit.
2020-12-03 13:12:12 +00:00
Bill Somerville
3134dd8a60
Removed incorrect pointer declaration, tnx to Rud, K5RUD
2020-12-03 12:20:14 +00:00
Bill Somerville
de0af5a2ed
Merge branch 'feat-outgoing-udp-interface' into develop
2020-11-10 20:09:48 +00:00
Steven Franke
e0888eb70c
Restore wsprsimf and dependencies.
2020-11-06 09:33:44 -06:00
Bill Somerville
1a223f5c45
Remove unwanted file and directory
2020-11-03 20:29:25 +00:00
Bill Somerville
731fe53a1e
Reasonable default values for NB setting for command line jt9
...
Use the -X command option to set single decode mode and to set the NB
level.
-X 256*(n+3)+s
Where s=32 selects single decode mode, and 'n' is the equivalent NB
setting as used in the WSJT-X UI. Default for both is zero in FST4(W)
mode if no -X option is passed. E.g. -X 544 selects single decode with
NB=-1 (256*(-1+3)+32).
2020-10-26 20:20:52 +00:00
Bill Somerville
5efe448a9c
Cosmetic change
2020-10-23 03:32:22 +01:00
Bill Somerville
308d815fb5
Add --freq-tolerance (-F) jt9 option
2020-10-23 03:24:19 +01:00
Bill Somerville
90b3fa2a46
Merge branch 'release-2.3.0' into develop
2020-10-13 16:51:40 +01:00
Bill Somerville
6026944e33
Workaround for some memory issues, possibly thread stack sizing
...
Reduced maximum thread team size for MSK144 candidate discovery to 4.
2020-10-07 13:12:20 +01:00
Bill Somerville
ead587ee55
Fix up out of date common block sizing
2020-10-04 22:52:51 +01:00
Bill Somerville
203e0da5d6
Fix up out of date common block sizing
2020-10-04 00:45:56 +01:00
Joe Taylor
9200c3e27a
Add NB = -3% option to cycle through NB=0, 1, 2, 3, ... 20%.
2020-09-30 13:32:03 -04:00
Joe Taylor
0ab3e5116f
Fix several flaws in the loop-over-NB logic in the FST4 decoder.
2020-09-19 10:08:42 -04:00
Joe Taylor
2af01ebaa1
Fix a flaw in the loop-over NB logic. There are more flaws!
2020-09-18 15:52:33 -04:00
Joe Taylor
f0ed93cdd0
In the NB-loop, don't cycle around a decode attempt for the npct=0 pass.
2020-09-18 11:45:28 -04:00
Joe Taylor
52bdd57e57
Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value.
2020-09-18 11:30:23 -04:00
Joe Taylor
375a869a51
Revert "Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again.""
...
This reverts commit 033cc65d08
2020-09-18 09:01:51 -04:00
Joe Taylor
033cc65d08
Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again."
...
This reverts commit bcf7f36b9c
2020-09-17 19:30:07 -04:00
Joe Taylor
bcf7f36b9c
Very basic code (including some diagnostics) for "try all NB settings". Will remove it again.
2020-09-17 19:28:55 -04:00
Steven Franke
7d58df4cc1
In FST4 mode with Single Decode not checked, move candidates within 20 Hz of nfqso to the top of the list.
2020-09-17 14:22:38 -05:00
Joe Taylor
21dc6a5c59
Connect the FLow and FHigh limits for FST4 decoding.
2020-09-16 17:23:59 -04:00
Steven Franke
221ede2903
Remove some unused variables.
2020-09-14 13:07:07 -05:00
Steven Franke
b49a90f530
Remove a redundant array.
2020-09-14 13:03:33 -05:00
Steven Franke
1b59d9dc8c
Eliminate redundancies from the calculation of sequence correlations.
2020-09-14 12:42:32 -05:00
Steven Franke
ca0804450b
Remove some redundant code.
2020-09-14 09:07:45 -05:00
Steven Franke
3d8c8e3dd7
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-14 09:00:35 -05:00
