Joe Taylor
b43d91240d
New end-of-QSO sequencing logic (possibly temporary) for CQing FT4 station.
...
When RR73 is received we log the QSO, turn "Call 1st" OFF, and call CQ again.
Also, allow Alt+C and F6 (the latter only if altenrate F1-F6 bindings
are active) to toggle "Call 1st" ON/OFF.
2019-04-15 16:26:41 -04:00
Steve Franke
cd8ea16f40
FT8: Use GFSK waveform with BT=4.0 as reference for subtraction, for now. May want to change to BT=2.0 before v2.1 release?
2019-04-12 17:11:26 -05:00
Joe Taylor
56c1aacbc2
Remove a diagnostic qDebug().
2019-04-09 22:03:59 -04:00
Joe Taylor
2633f6fb6d
Make the label red, not the whole button.
2019-04-09 20:12:48 -04:00
Joe Taylor
2b42650a73
Make the "Best S+P" button red when activated.
2019-04-09 08:48:13 -04:00
Joe Taylor
20bed38323
Best S+P activates only when not transmitting.
2019-04-08 13:18:30 -04:00
Joe Taylor
6e1d5ea1d8
BestSP calls New DXCC as well as New Call on Band.
2019-04-08 12:52:23 -04:00
Joe Taylor
b6032277d0
The "Best S+P" button is now functional. Needs testing!
2019-04-08 12:36:05 -04:00
Joe Taylor
ec97d0410e
Possibly temporary: add a "Call Best" button for S+P use in FT4 mode.
2019-04-07 21:08:38 -04:00
Joe Taylor
964c148794
Fix the UTC displayed at left of waterfall in FT4 mode.
2019-04-07 13:36:29 -04:00
Joe Taylor
7f61c7a07b
Reactivate the not-GA timneout message, for -rc3.
2019-04-04 16:20:07 -04:00
Joe Taylor
ed80b9c7e4
Remove "TU; " from a double-clicked message before processing it.
2019-04-04 12:47:10 -04:00
Joe Taylor
e49e80ffb7
Enable the "TU; ..." message in FT4 mode.
2019-04-03 13:15:23 -04:00
Joe Taylor
5aba83b9df
Fix another minor FT4 flaw.
2019-04-03 11:49:39 -04:00
Joe Taylor
f24d45cb17
Fix a flaw in FT4 auto-sequencing.
2019-04-03 11:13:47 -04:00
Joe Taylor
6ea9f4990d
Several tweaks to FT4 simulation and decoding procedures. Now -0.5 < DT < 0.5
2019-04-03 10:13:50 -04:00
Joe Taylor
013c06b6ca
Fix a probmel with decoding FT4 from .wav files.
2019-04-03 09:25:32 -04:00
Joe Taylor
c8dae29425
Synchronized FT4 auto-sequencing now works.
2019-04-02 13:27:55 -04:00
Joe Taylor
181e5c7b9d
Remove unused code left over from asynchronous FT4 mode.
2019-04-02 13:16:06 -04:00
Joe Taylor
d579e5973e
Correct the size of saved FT4 .wav files.
2019-04-02 13:04:40 -04:00
Joe Taylor
fd239d9c07
Clean up some timing issues with time-synchronized FT4.
2019-04-02 11:39:28 -04:00
Joe Taylor
888b5fee28
Make "Tx 1st/Even" visible in FT4 mode.
2019-04-01 14:40:16 -04:00
Joe Taylor
e0d4c94cc1
Some very basic functionality for time-synchronized FT4.
2019-04-01 14:23:10 -04:00
Steve Franke
68308e23aa
FT8: Tx waveform will now change (after a short delay) if Tx message is changed after a transmission has started.
2019-03-29 15:30:50 -05:00
Bill Somerville
9e75b5c2b5
Log buttons
2019-03-29 02:54:30 +00:00
Joe Taylor
e3d4a1c3a6
FT4: double-click on a yellow Tx mesage causes re-sending that message.
2019-03-28 13:08:43 -04:00
Joe Taylor
e4ebddcf13
When Tx1 entry is disabled, Tx1 button should also be disabled.
2019-03-28 10:41:56 -04:00
Joe Taylor
1da4809e1b
Do not disable double-clicking when m_inQSOwith is populated. (Correct???)
2019-03-28 09:41:38 -04:00
Joe Taylor
e571349c69
In FT4 mode, let the Tx# buttons start a transmission.
2019-03-28 09:30:26 -04:00
Joe Taylor
665dbd0f78
With Alternate F1-F5 checked, let Ctrl+F1 send the message in Tx1.
2019-03-22 13:52:06 -04:00
Joe Taylor
e38091705b
In FT4 mode, let F11 and F12 move Tx freq by +/- 120 Hz.
2019-03-22 10:57:09 -04:00
Joe Taylor
974cf50e16
Red label (ui->labDXped) should disappear in FT4 modeif we leave all contest modes.
2019-03-22 09:24:52 -04:00
Joe Taylor
2f0ff14134
Enable NA_VHF contest messages in FT4 mode.
2019-03-22 08:49:22 -04:00
Joe Taylor
e2db793b5d
Don't save .wav files in FT4 mode unless SaveAll is checked.
2019-03-22 08:20:19 -04:00
Joe Taylor
212e4a3c07
Add a timeout message for what will become v2.1.0-rc1.
2019-03-21 12:36:38 -04:00
Joe Taylor
ffb6d3624f
In FT4 mode, display only "for us" and Tx messages in right window.
2019-03-21 09:33:37 -04:00
Joe Taylor
3a6e26d645
Clean up the FT4 logic for setting status of labDXped, cbAutoSeq, cbFirst.
2019-03-14 12:03:07 -04:00
Joe Taylor
6a2effcfc6
In FT4 mode, Tx4 is now hardwired to the 'RR73' message.
2019-03-13 13:59:41 -04:00
Joe Taylor
e150d003d6
Fix an inforrect constant in ft4_rx() that skipped over first 0.208 s of Rx data.
2019-03-13 10:31:23 -04:00
Joe Taylor
e9a999cda1
Use the "TU; ..." message when starting another FT4 QSO almost right away.
2019-03-12 11:09:49 -04:00
Steve Franke
7a0823301a
Remove some temporary code.
2019-03-09 10:03:01 -06:00
Joe Taylor
69675153a7
FT4 sequencing seems OK now (but needs thorough testing). No "TU;" msgs yet.
2019-03-07 14:36:58 -05:00
Joe Taylor
87826d1a6c
Clean up some FT4 code.
2019-03-07 11:21:17 -05:00
Joe Taylor
ff0b6a03a4
Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2
2019-03-05 09:22:08 -05:00
Steve Franke
d7012267c0
CQ message type strings are now passed from mainwindow.cpp to ft4_decode.f90, to enable AP decoding of special CQ messages.
2019-03-04 17:10:57 -06:00
Joe Taylor
89cffbc959
Move the call to processMessage() to correct place in ft4Data().
2019-03-04 10:11:55 -05:00
Joe Taylor
871ff3892b
Use "CQ SCC ..." for Tx6 message if RTTY RU Exch = SCC.
2019-02-28 11:42:28 -05:00
Joe Taylor
6b5131ab5e
Trial changes to support messages for Slovenian Contest Club's RTTY-like contest.
2019-02-28 11:21:06 -05:00
Bill Somerville
278c544a6a
Merge branch 'develop' into feat-ft2
2019-02-26 11:52:14 +00:00
Steve Franke
fdca7c2dcb
Merge branch 'feat-ft2' of bitbucket.org:k1jt/wsjtx into feat-ft2
2019-02-25 15:03:55 -06:00
