Commit Graph

274 Commits

Author SHA1 Message Date
Bill Somerville
bae3b94fd6 Build a cache of allowed SSL exceptions and use them on future network requests
The   class  NetworkAccessManager   sub-classes  QNetworkAccessManager
adding  a  message  box  to  ask   the  user  if  SSL  errors  may  be
ignored. Ignored errors  are ignored in future server  replies so that
the user is not asked about he same peer certificate chain repeatedly.
The cache is currently per process only and not persistent.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 14:17:01 +00:00
Joe Taylor
4838d97370 New parameters for AP decoding in QRA64. Do not use this revision on the air!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 15:50:47 +00:00
Bill Somerville
840163ab97 Change the "CQ nnn ..." logic to specify the calling frequency...
... rather than the working frequency.

Users set their working frequency and specify a calling frequency as a
kHz offset  into the  current Rx  MHz with the  main window  spin box.
Calling CQ on  the specified calling frequency is  enabled by checking
the associated option.

Also enhanced  the auto  sequencing to handle  short code  73 messages
correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 01:34:43 +00:00
Joe Taylor
d53085b552 Correct a flaw that could cause Tx to start as a result of a decode with AutoSeq active.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7329 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 15:47:59 +00:00
Joe Taylor
80787c0721 New sync pattern for QRA64; implement fast-fading algorithm for QRA64A-C. Several things in QRA64 still need attention, in addition to submodes D and E!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7301 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-08 20:11:02 +00:00
Joe Taylor
026b9a3916 Correct a flaw in behavior of "Lock Tx=Rx" (Tnx to VK4EME). CR in DXCall entry ==> do "Lookup" (Tnx to W9MDB).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7297 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-07 13:47:09 +00:00
Joe Taylor
cdaa64324a Add warning message if VHF features enabled on a lower band. Clean up "Decoded Lines" table in User Guide, and corresponding ISCAT end-of-line characters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-03 14:05:05 +00:00
Joe Taylor
e0f80b7afc Correct a flaw in deep4 (apparently caused by gfortran optimizer?). Move
display of the "No More Files..." message until after the "Decode Finished"
message is received.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-31 14:24:02 +00:00
Bill Somerville
cfb1a3cbe2 Use Qt signals to process configuration name changes
This change maintains the encapsulation  of the MultiSettings class by
using  a  signal   to  notify  clients  of  changes   to  the  current
configuration name.

Modifications  to   the  MainWindow  class  to   display  the  current
configuration name in the status bar, if it is not "Default", based on
MultiSettings events rather than polling for changes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7257 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 17:15:04 +00:00
Joe Taylor
0c0e3ec978 Add a status bar label for configuration name (if other than "Default").
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7252 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 14:33:00 +00:00
Joe Taylor
a0d27d23f7 Introduce a 1-second delay before starting wsprd. (There is probably a better
way to make sure that the new .wav file is ready, before starting wsprd?)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7242 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 19:01:46 +00:00
Joe Taylor
0441986ccc Add the W9MDB patch (very slightly modified) for band-by-band memory
of power settings for Transmit and Tune.  Also an interim update of
v1.7_Features.txt.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7229 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 20:24:09 +00:00
Joe Taylor
91ea5ffa08 Major refactoring of code that determines visibility of GUI controls. Please report any undesired or incorrect behavior!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7209 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 19:25:48 +00:00
Joe Taylor
c2d2ec8dd7 Remove vestigial references to WSPR_2. Update wsjtx.pro. Add samples for all modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7208 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 15:43:03 +00:00
Joe Taylor
ec2c5b78d4 correct a flaw in "Decode remaining files in directory"; correct the widget visibility in ISCAT mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7201 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-19 18:09:27 +00:00
Joe Taylor
5da7e84f54 Correct a timing issue for saving MSK144 files in short (e.g. 5 s) sequences. Save after Alt-V even if Save = None.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7191 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-17 16:51:14 +00:00
Joe Taylor
823b018592 Trying to make position and status of the central GUI controls correct and logical for VHF and non-VHF usage.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 16:33:18 +00:00
Joe Taylor
672a4e88b5 MSK144 mode: minimum Ftol=20; report received copied to Log screen; spots sent to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:16:47 +00:00
Joe Taylor
8dc2fef844 Back out some changes that were broken. PSK reporter not yet functional for MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 20:10:46 +00:00
Joe Taylor
23785f60e4 Oops! Committed wrong versions. This code is not ready for use!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:40:26 +00:00
Joe Taylor
02ef8823ef 1. Allow Ftol down to 20 Hz in MSK144 mode.
2. Do not adjust Rx Freq automatically after an MSK144 decode.
3. Insert the Rcvd report in log window.
4. Send MSK144 decodes to PSK Reporter.

NB: not all these are fully tested, yet.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:32:16 +00:00
Joe Taylor
cd0895c26a Add a performance monitor for real-time MSK144 decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 13:29:20 +00:00
Joe Taylor
6579b93690 Progress toward full implementation of real-time decoding of MSK144.
I believe file saving and auto-sequencing nor work.  Not sure about posting
to PSK reporter: please check.  


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7112 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 19:08:19 +00:00
Steven Franke
f210e47cd5 MSK144:
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines. 
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Joe Taylor
c4d00b0f47 1. Display proper UTC on Fast Graph for files read from disk.
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 13:34:40 +00:00
Joe Taylor
13ffbb20eb Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00
Bill Somerville
66eaf24af0 Add a configurations button to the rig error message box
This button pops up the same context menu as the configurations button
on the main window menu bar. This allows the operator to easily escape
from an incorrectly configured configuration without changing it.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7075 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:50 +00:00
Joe Taylor
1ecc3d7c01 Correct the m_hsymStop values for slow modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7060 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-07 19:00:55 +00:00
Joe Taylor
cbc4ef1b49 Change cbEME to cbAutoSeq (always). Protect against frequency jump in MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 15:36:17 +00:00
Steven Franke
ca19e977c0 Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7051 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-01 21:50:52 +00:00
Bill Somerville
afed56d008 Proper splash screen and release notes help menu link
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7007 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-06 13:52:14 +00:00
Joe Taylor
9684106dd7 1. Fix the nfqso < nf1 but in qra64.f90.
2. Delay splash screen until after main window starts.
3. Keep cbTxLock enabled in QRA64 mode.
4. Update v1.7_Features.txt.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7005 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-05 14:14:24 +00:00
Joe Taylor
9993760bac Re-enable MSK144 click-to-decode, top panel only.
Fix the improper display of "Fast" checkbox.
Disable "CQ nnn" checkbox if MyCall is not K1JT or K9AN.
Use AppDir as path to execute the LDPC encode program.
Don't display submodes in mode label for JTMSK, MSK144.
Make Rx Freq spinner invisible in MSK144 mode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7001 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 19:30:27 +00:00
Joe Taylor
8159e2da50 Tentative and temporary change to encode MSK144 in a separate process.
NB: temporary files are being written to execution directory!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6989 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-03 15:34:42 +00:00
Bill Somerville
c586204d75 Add proper Qt validation for callsigns and grids
Two      new     validator      classes     CallsignValidator      and
MaidenheadLocatorValidator   are   introduced    and   used   in   the
Configuration and MainWindow implementations.

MaidenheadLocatorValidator  supports  different  lengths  and  minimum
required  lengths  with  a  default of  subsquare  with  square  being
required.

The  message_aggregator  application has  been  enhanced  to show  the
current DX call and DX grid as shown in the WSJT-X main window.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-10 22:20:30 +00:00
Bill Somerville
396dd6d491 Furter attempts to get the Tx watchdog and its UDP Status Message right
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6901 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-09 18:35:25 +00:00
Bill Somerville
46ff34a04a Refactor a poor variable name
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6898 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-08 20:45:45 +00:00
Bill Somerville
3f1ea9d10c Make message boxes more platform independent with a wrapper
Instead  of  using the  Qt  QMessageBox  class  directly a  new  class
MessageBox  (MessageBox.hpp)  has been  added  to  deal with  platform
independence issues like the title not being shown on Mac OS X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-03 20:31:19 +00:00
Joe Taylor
3016ccee01 Many renames: QRA65 --> QRA64, QRA02 --> QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 12:15:41 +00:00
Bill Somerville
23e4f34612 Switch to status bar notification of runaway Tx watchdog
Rationalize the status bar construction and maintenance.

Ensure that incoming UDP Reply messages reset the watchdog.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6847 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 00:25:38 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 11:36:59 +00:00
Bill Somerville
c864766332 Ant mouse press or key press in the main window resets the Tx watchdog
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6831 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 16:25:47 +00:00
Joe Taylor
100c3d3121 More changes for QRA01 --> QRA02.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6825 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-29 19:12:46 +00:00
Bill Somerville
c69bfee149 Fast mode audio recording behaves the same way as slow modes
Fixed naming of fast recording files.

Tidied some signal/slot plumbing in the fast plotter.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6806 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 17:01:51 +00:00
Joe Taylor
9c19ff3eea Making progress on what will become QRA65 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6794 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-22 20:26:41 +00:00
Bill Somerville
2beef948d9 Adaptive sample block size to match FFT sizes
This  change  corrects timing  discrepancies  on  the horizontal  fast
spectrum plot.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-17 01:27:00 +00:00
Bill Somerville
8e43af11e5 Fix numerous memory leaks and uses of uninitialized variables
These were discovered when running under teh valgrind MemCheck tool. I
have also  checked in a suppressions  file (wsjtx-valgrind.linux.supp)
suitable for use on Linux when running the valgrind MemCheck tool.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-10 15:54:16 +00:00
Bill Somerville
7be033e8c2 Report WAV file reading and writing errors
Refactor the  save WAV  file routine  to return an  error string  as a
promise and then get that result and report in a QMessageBox.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6752 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 23:39:41 +00:00
Joe Taylor
df518f4e1d Make it possible to find MSK144 code-definition files in the "data_dir" on all platforms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6747 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 15:06:15 +00:00
Joe Taylor
143736129b Starting to implement the hooks for interfacing to QRA mode.
Pass file path for peg-128 files to fast_decode().  (Inelegant, but it works.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-08 21:20:58 +00:00