Commit Graph

846 Commits

Author SHA1 Message Date
Bill Somerville
0cf14dfcc9
Remove user adjustable audio buffer sizes from Settings
Fixed buffer sizes are  used. Rx use s 3456 x 1st  downsample rate x 5
audio  frames  of  buffer  space.  On Windows  this  means  that  each
chunk (periodSize())  delivered from the  audio stream is  our initial
DSP processing chunk size, thus  matching audio buffer latency exactly
with WSJT-X's  own front  end latency. This  should result  in optimal
resilience to high system loads that might starve the soundcard ADC of
buffers to fill and case dropped audio frames.

For Tx  a buffer sufficient for  1 s of  audio is used at  present, on
Windows  the period  size will  be  set to  1/40 of  that which  gives
reasonably low latency  and plenty of resilience to  high system loads
that might  starve the soundcard DAC  of audio frames to  render. Note
that a 1 s  buffer will make the "Pwr" slider slow  to respond, we may
have to reduce the Tx audio buffer size if this is seen as a problem.
2020-08-11 13:48:01 +01:00
Bill Somerville
1892f39df3
Revert "TEMPORARY: Diagnostic routine for the "Save All" missing files problem."
This reverts commit b5765401dc.
2020-08-10 01:42:26 +01:00
Joe Taylor
b5765401dc
TEMPORARY: Diagnostic routine for the "Save All" missing files problem. 2020-08-09 22:50:17 +01:00
Joe Taylor
07f63cdb63 Small adjustment to make file names for QRA66-30 modes correct. 2020-08-09 15:48:56 -04:00
Joe Taylor
42626009b5 TEMPORARY: Diagnostic routine for the "Save All" missing files problem. 2020-08-09 14:21:25 -04:00
Joe Taylor
de0476bf3c More changes to allow longer sequences in QRA66 mode. 2020-08-08 16:53:28 -04:00
Bill Somerville
ecf0a146f1
Merge branch 'develop' into feat-dropped-frames 2020-08-08 21:26:51 +01:00
Bill Somerville
94d66bc848
Make FST4W scheduling l10n agnostic 2020-08-08 21:25:32 +01:00
Bill Somerville
2e413713a3
Tidy dropped frame status bar message 2020-08-08 19:40:42 +01:00
Joe Taylor
d683cb6b8e Updates to GUI for different QRA66 sequence lengths and submodes. 2020-08-08 14:37:01 -04:00
Bill Somerville
02e19b687f
Status message to report approximate # of dropped Rx audio frames
This is  a first cut  at this to  evaluate buffer size  adjustments on
supported platforms. A final version might limit status bar reports to
>1000 dropped frames or similar.
2020-08-08 17:12:48 +01:00
Bill Somerville
a0ceace5b4
User configurable audio device buffer sizes
Adjusting these may help with  audio drop-outs, particularly on slower
CPU systems or heavily loaded systems. Smaller buffer sizes leave less
margin for  process interruptions,  larger sizes waste  resources that
could impact other processes.
2020-08-08 16:25:14 +01:00
Bill Somerville
f975f2c181
Further widget contrast improvements for use with dark stylesheets 2020-08-08 15:06:31 +01:00
Joe Taylor
bf38f4416c Modifications to give QRA64 use of longer TR periods and tone-spacing submodes. Noy yet finished, or tested! 2020-08-08 09:14:12 -04:00
Bill Somerville
bf58cd43aa
Improve contrast of coloured widgets in dark style 2020-08-08 13:20:52 +01:00
Bill Somerville
0ba5d7e1bf
More flexibility for QDateTime round/truncate routine 2020-08-07 21:31:48 +01:00
Joe Taylor
7256d70016 QRA66: change NSPS from 1920 to 1800. TxT=85*1800/12000=12.75 s. 2020-08-05 11:06:18 -04:00
Joe Taylor
2bb9566731 In QRA66 mode, make unused widgets invisible. 2020-08-05 09:37:03 -04:00
Joe Taylor
88102af49d Fic the transfer of ntol from GUI to qra66_decode(). 2020-08-04 12:53:37 -04:00
Joe Taylor
aff22a904d Better marking of QRA66 Rx freq range and Tol on Wide Graph. 2020-08-04 11:51:40 -04:00
Bill Somerville
09dc647c12
Make tool-tips more generic on T/R period 2020-08-04 11:49:33 +01:00
Bill Somerville
d2525c73a3
Minor cosmetic main layout changes 2020-08-04 11:44:26 +01:00
Bill Somerville
fb8b938ac7
Make FST4 std message generation consistent with other 77-bit modes 2020-08-04 11:43:19 +01:00
Joe Taylor
e32c5b699d Update Wide Graph and plotter.cpp for QRA66. 2020-08-01 13:37:31 -04:00
Joe Taylor
3867c452e6 Changes to GUI to accommodate QRA66. It's basically functional, I think. 2020-08-01 12:13:49 -04:00
Bill Somerville
92cf7b29c2
Merge branch 'develop' into feat-fst280 2020-07-31 15:00:50 +01:00
Bill Somerville
b05bfecb5f
Avoid arithmetic errors when parsing the round-robin current text 2020-07-31 12:39:08 +01:00
Bill Somerville
c2b835c42b
Translatable help windows 2020-07-29 18:44:34 +01:00
Joe Taylor
846b0b6ed8 Fix the problem "Tx did not start in the first Round-Robin sequence when it should have started". 2020-07-29 11:58:28 -04:00
Bill Somerville
0f3fc3d15c
Correct time on beacon mode Tx prints in decodes window 2020-07-27 19:51:56 +01:00
Bill Somerville
6cb72a5f3e
Remove duplicate ALL.TXT Tx report in beacon modes 2020-07-27 19:49:39 +01:00
Bill Somerville
3bf070938b
Enable Tx percentage spin box in WSPR and random FST4W modes 2020-07-27 19:48:13 +01:00
Bill Somerville
2bf8888725
Merge branch 'develop' into feat-fst280 2020-07-27 15:02:44 +01:00
Bill Somerville
080e21f6fc
Remove testing code 2020-07-27 15:01:09 +01:00
Joe Taylor
e96dee4c23 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-27 09:57:02 -04:00
Joe Taylor
236e334e71 *** TEMPORARY *** Allow transmitting FST4-15A and FST4-15B simultaneously. 2020-07-27 09:55:49 -04:00
Bill Somerville
c5248bf116
Merge branch 'develop' into feat-fst280 2020-07-27 13:25:28 +01:00
Bill Somerville
bb927a6115
Handle missing user_hardware on non-Windows systems 2020-07-27 13:13:04 +01:00
Bill Somerville
a2ad0be85b
Use shell to execute user_hardware via PATH 2020-07-27 12:19:47 +01:00
Bill Somerville
b4bbc44d5b
Invoke user_hardware correctly 2020-07-27 00:51:12 +01:00
Bill Somerville
5382ef4a33
Merge branch 'develop' into feat-wspr-user-hardware 2020-07-26 18:03:23 +01:00
Bill Somerville
7bb5a8e009
Merge branch 'develop' into feat-psk-reporter-re-work 2020-07-26 15:52:39 +01:00
Bill Somerville
9c22eb321d
Merge branch 'develop' into feat-fst280 2020-07-26 16:20:11 +01:00
Bill Somerville
2f700265b9
Merge branch 'develop' into feat-fst280 2020-07-26 10:20:55 +01:00
Bill Somerville
7566f3548d
Post FST4W spots to WSPRNet.org
Includes a re-factoring  of the WSPRNet class,  particularly to handle
direct spot posts as well as via  a file from wsprd. Switched from GET
http request method to POST method.

FST4W spots  post the same information  a WSPR spots except  the drift
field is  always zero (FST4W  has no  drift compensation, so  no drift
figure is calculated by the decoder),  and the mode field reflects the
T/R  period in  minutes.  This  means  FST4W-120A will  be similar  to
WSPR-2, an FST4W-900  will be similar to WSPR-15. I  don't see any way
to  view the  mode field  on  either the  new or  old database  format
queries on WSPRnet,  so it is hard  to tell if that  field is actually
stored.
2020-07-26 02:58:04 +01:00
Bill Somerville
63b1b0729a
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-26 02:54:04 +01:00
Joe Taylor
ceeafa5bed *** TEMPORARY *** Add a feature to transmit FT8 and FST4 at the same time. 2020-07-25 16:02:42 -04:00
Bill Somerville
4015c5e538
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-24 21:16:52 +01:00
Joe Taylor
5c4878a00a Display cursor position on Wide graph as a ToolTip. 2020-07-24 13:35:04 -04:00
Joe Taylor
dbaffea0cd Allow only TR periods >= 120 s for FST4W. 2020-07-24 11:13:48 -04:00
Bill Somerville
90c1824ffe
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-24 16:01:57 +01:00
Joe Taylor
c802c60afa Allow FST4 to use Split (Rig or Fake it). Set Tx upper freq limit for FST4W to 1600 Hz. 2020-07-24 10:58:10 -04:00
Bill Somerville
29fc0ced19
Revert "Fix double-clicking on a decode line containing fSpread."
Change superseded.

This reverts commit d9c2a11821.
2020-07-24 12:46:43 +01:00
Bill Somerville
580dd85a18
Remainder of renames to FST4 2020-07-23 18:51:05 +01:00
Joe Taylor
77a6f8f514 Move blanking from symspec() to fst240_decode(). Do not apply RefSpec corrections to data read from disk. 2020-07-23 10:58:10 -04:00
Bill Somerville
51f692d8d4
Avoid double Tx periods in WSPR modes when changing scheduling basis 2020-07-22 18:01:06 +01:00
Bill Somerville
ffd2ad4dc0
Narrower decodes display and move AP info into extra appended info 2020-07-22 01:05:14 +01:00
Joe Taylor
52643b01e2 Correct the "time to decode" and the "Tune" frequency for FST240 modes. 2020-07-21 14:56:20 -04:00
Joe Taylor
05a1b3bae8 Remove "Also FST240W" from the Decode menu and elswhere in the GUI. 2020-07-21 14:18:55 -04:00
Joe Taylor
52984a507a Move the WSPR frequency range indicator (green line) up 3 pixels. 2020-07-21 14:11:11 -04:00
Bill Somerville
5111dcdfa8
Include sub-mode in .WAV file meta-data for FST240 modes 2020-07-21 14:57:44 +01:00
Bill Somerville
0f6d054276
Narrow decode prints in the Band Activity window 2020-07-21 00:29:22 +01:00
Bill Somerville
09996d4d64
Leave decodes titles intact when changing settings in FST240* modes 2020-07-20 19:33:46 +01:00
Joe Taylor
2e916f995c Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-20 13:59:12 -04:00
Bill Somerville
06b9746619
Make fSpread printing compatible with QSOs 2020-07-20 18:27:29 +01:00
Bill Somerville
0c15ed36e9
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-20 17:12:36 +01:00
Joe Taylor
d9c2a11821 Fix double-clicking on a decode line containing fSpread. 2020-07-20 11:48:09 -04:00
Joe Taylor
9702537614 Add Round-Robin options for cycles of 4, 5, and 6 sequences. 2020-07-20 11:29:58 -04:00
Joe Taylor
07e06de8f3 Increase gain of the yellow "Linear average" plot. 2020-07-20 11:23:30 -04:00
Joe Taylor
b427a92137 Increase max value of Navg spinner on WideGraph. 2020-07-20 11:16:37 -04:00
Bill Somerville
22f66795a1
Improved C/Fortran string interoperation, and fix azel.dat updates
The azel.dat file is no  longer written with future Doppler correction
information designed  for rigs  that can't do  CAT QSY  commands while
transmitting.
2020-07-20 15:15:55 +01:00
Bill Somerville
731dfc5c6f
Qt 5.15 compatibility 2020-07-19 21:09:52 +01:00
Joe Taylor
6a4f1fbdf7 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-19 13:21:45 -04:00
Joe Taylor
159b8a97f7 Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used. 2020-07-19 13:20:41 -04:00
Bill Somerville
58fc82e178
Correct standard message generation for FST240 2020-07-19 12:31:10 +01:00
Joe Taylor
7fa7b0dda9 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-18 13:57:08 -04:00
Joe Taylor
4fa9557272 Add end-of-Rx-sequence number of buffers for 900 and 1800 s sequences. 2020-07-18 13:56:19 -04:00
Joe Taylor
e73f27954d Increase valid range of TRperiod controls. 2020-07-18 13:55:33 -04:00
Bill Somerville
43d6eacc4b
Refined stop times 2020-07-18 18:52:09 +01:00
Bill Somerville
60ddd40049
More 15 & 30 minute T.R period updates 2020-07-18 18:50:08 +01:00
Bill Somerville
28c5bfc1bd
Process double-clicks of Fox multi-caller replies correctly
This change also ignores attempts to double-click other Hound calls.
2020-07-18 14:47:20 +01:00
Bill Somerville
8b35e744d0
Increase Tx waveform storage & update wide graph nsps for FST240 2020-07-18 10:35:26 +01:00
Bill Somerville
4e0f1103b6
15 and 30 minute T/R periods for FST240 & FST240W 2020-07-17 23:44:14 +01:00
Bill Somerville
cccb38dbef
Pass hints to fst240sim, genfst240, and packjt77::pack77 on WSPR msgs
Due to  an ambiguity with  message encodings between 77-bit  QSO modes
and 50-bit  beacon modes with message  types 13.n3 4.0 and  0.6 a hint
needs to be  passed to ensure the right encoding  is emitted. The hint
only  effects  ambiguous messages,  others  will  be encoded  strictly
according to the message content.
2020-07-17 19:09:21 +01:00
Joe Taylor
64dc6c6a6e Move the red goal post appropriately when FST240 or FSt240W mode is selected. 2020-07-17 12:00:15 -04:00
Bill Somerville
74970acdb7
Align FST240W round-robin scheduling with hours 2020-07-16 14:09:24 +01:00
Bill Somerville
785e9e7924
Undo a change only intended to testing 2020-07-15 14:45:08 +01:00
Joe Taylor
79dbdcca9c Correct a typo. 2020-07-14 14:54:40 -04:00
Joe Taylor
8ff7da3884 FST240W should Tx at audio freq in WSPRfreqSpinBox, not TxFreqSpinBox. 2020-07-14 14:51:40 -04:00
Joe Taylor
c925f6d1cc Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-14 11:43:40 -04:00
Joe Taylor
cbeb81b499 Add LF/MF noise blanker capability for FST240 and FST240W. 2020-07-14 11:27:41 -04:00
Bill Somerville
479dc1113f
Use non-averaging decodes window headings for FST240 2020-07-13 13:27:12 +01:00
Bill Somerville
7118f1ad14
Correct T/R period options for older modes, and correct start times
Fix up decode window headings.
2020-07-12 01:38:36 +01:00
Bill Somerville
f77b6bf71a
Only show FST240W T/R period spin box in FST240W mode 2020-07-08 19:37:31 +01:00
Joe Taylor
4de41162a3 Make sure FST240W uses submode A. 2020-07-06 15:36:01 -04:00
Joe Taylor
d4bf73df84 Minor cleanup of RoundRobin control. 2020-07-03 14:17:13 -04:00
Joe Taylor
cbca2f2d80 No band-hopping in FST240W mode. 2020-07-03 10:06:52 -04:00
Joe Taylor
15014685ac Round-robin control should be visible only in FST240W mode. 2020-07-03 10:05:16 -04:00
Joe Taylor
f9e9a4e1ec Don't let mouse-click on WindGraph move frequencies in FST240W mode. 2020-07-03 09:58:52 -04:00
Joe Taylor
b9e92c416f Implement round-robin scheduling for FST240W mode. 2020-07-03 09:48:01 -04:00
Joe Taylor
5637b229a0 Correct the logic for initializing TRperiod everywhere in FST240W mode. 2020-07-02 16:54:16 -04:00
Joe Taylor
9f3bb0fbb7 Show option "Also FST240W" only in FST240 mode. 2020-07-02 16:20:18 -04:00
Joe Taylor
ab2371a96b Correct the logic for generating "Type 2: messages in FST240W. 2020-07-02 14:57:46 -04:00
Joe Taylor
1a82b9b24d Change the label for decoded text panel in FST240W mode. 2020-07-02 14:11:35 -04:00
Joe Taylor
8b2b1eb378 FST240W should always set RxFreq=1500 and FTol=100. 2020-07-02 14:03:00 -04:00
Joe Taylor
34055d331a Send TRperiod to WideGraph when entering FST240 and FST240W modes. 2020-07-02 13:48:35 -04:00
Joe Taylor
352b497399 Remove a diagnostic print. 2020-07-02 13:43:50 -04:00
Joe Taylor
ee013f8687 Remove an unused action. 2020-07-02 13:29:43 -04:00
Joe Taylor
860224e890 Many changes to make FST240W behave in most ways like WSPR. Needs testing! 2020-07-02 09:39:11 -04:00
Joe Taylor
e63b04bb44 Post FSt240W decodes to PSK Reporter. 2020-07-01 15:46:17 -04:00
Joe Taylor
0608521751 Remove unused references to WSPR_LF. 2020-07-01 15:12:14 -04:00
Joe Taylor
eb1c60e454 Remove several more vestiges of WSPR-LF mode. 2020-07-01 13:17:07 -04:00
Joe Taylor
8903041aa9 Fix the startup value of TRperiod for FST240W mode. 2020-07-01 12:10:42 -04:00
Joe Taylor
f2c3cbf9ac Implement basic functiionality of FST240W in the GUI. 2020-07-01 12:01:47 -04:00
Joe Taylor
ae54c80a54 Here's a start on GUI changes to support FST240W as well as FST240. 2020-06-30 17:14:58 -04:00
Joe Taylor
a44b240192 Change to NSPS=720 for 15-seconf FST240 modes, to allow use for EME. 2020-06-29 17:33:46 -04:00
Joe Taylor
ae6ca148bd Pass mode name to the Modulator. 2020-06-29 14:47:46 -04:00
Joe Taylor
494481fa8a Remove a poisonous but unused line of code. 2020-06-28 20:22:24 -04:00
Joe Taylor
7d094b36bf
Fix the "double-click on AP decode" crash. 2020-06-28 23:23:10 +01:00
Joe Taylor
1610375eee Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-06-28 16:27:23 -04:00
Joe Taylor
5b22280631 Fix the "double-click on AP decode" crash. 2020-06-28 16:26:22 -04:00
Bill Somerville
d5c5a58c7f
Merge branch 'develop' into feat-fst280 2020-06-27 22:14:09 +01:00
Joe Taylor
2b85c70bbc Correct the m_hsymStop values for FST240-300. 2020-06-27 16:58:55 -04:00
Joe Taylor
51447ef1d3 Remove the 1 s offset in wave() array. Fix NSPS for 300 s periods. 2020-06-27 16:24:11 -04:00
Joe Taylor
eb167b11d3 Fix several more GUI parameters for FST240. 2020-06-27 14:13:59 -04:00
Joe Taylor
cd9146e646 Change a few more GUI parameters for the switch from FST280 to FST240. Tx timing probably still needs work. 2020-06-27 13:07:11 -04:00
Steven Franke
390884268c Wholesale change from FST280 to FST240 2020-06-27 08:53:11 -05:00
Bill Somerville
4ee9ba6dba
Merge branch 'develop' into feat-wspr-user-hardware 2020-06-27 00:40:04 +01:00
Bill Somerville
37ab6eecd1
Update contributors, and UDP Message Protocol documentation 2020-06-27 00:23:34 +01:00
phl0
2a31d12d39
Adapt brach to changes proposed by G4WJS 2020-06-26 23:46:08 +01:00
phl0
6cbc91b653
Include prop mode in ADIF and UDP messages 2020-06-26 23:45:58 +01:00
Bill Somerville
27b4f2939a
More flexible execution of the user's hardware controller
Updated ways to implement a  user defined hardware controller which is
executed just after band changes during WSPR band hopping operation.

Allows the user_hardware executable to  be located in any directory on
the PATH environment variable. On Windows any file extension listed on
the PATHEXT  environment variable may  be used, the first  match using
PATH and  PATHEXT will  be executed.  On Windows  this is  achieved by
using CMD.EXE with a '/C' command  line flag, i.e. the user's hardware
controller is executed like this:

CMD.EXE /C user_hardware nn

where 'nn' is the new band as an integer in meters.

On non-Windows  systems the  user's executable  will be  run if  it is
found on the  directories specified by the  PATH environment variable,
and it is executable, i.e. it is equivalent to something like:

/bin/sh -c user_hardware nn

where 'nn' is the new band as an integer in meters.

In  all cases  the user_hardware  controller should  exit with  a zero
status, otherwise it have been deemed to have failed. On Windows avoid
an exit status of  one as that is utilized by  CMD.EXE to indicate the
file was not found, which WSJT-X ignores silently.

This change means the prior need to put the user's hardware controller
into   a  WSJT-X   installation  directory   like  /usr/local/bin   or
C:\WSJT\wsjtx\bin is no longer necessary.
2020-06-26 21:35:29 +01:00
Joe Taylor
9caf3b650c Correct a number of parameters that control FST280 signal duration and timing. 2020-06-25 17:18:48 -04:00
Bill Somerville
ee157cde96
Avoid overriding style sheet for astronomical data dialog background 2020-06-25 12:57:12 +01:00
Joe Taylor
1226aacaad Remove the silly C++ puzzle, no longer needed. 2020-06-24 21:25:02 -04:00
Joe Taylor
55115a2955 Move the Wide Graph's green bar for FTol up 3 pixels. 2020-06-23 15:15:45 -04:00
Joe Taylor
b006d8381a Code for a C++ puzzle. 2020-06-23 14:21:25 -04:00
Joe Taylor
04e326e75a Change "Enable VHF/UHF/Microwave features" to "Enable VHF and submode features", and remove the popup warning about being on a lower band. 2020-06-22 15:20:41 -04:00
Joe Taylor
1f7d8545f3 Tx line to ALL.TXT should be trimmed(). 2020-06-21 13:49:37 -04:00
Joe Taylor
956aa2dfc5 Call switch_mode() to repopulate bandComboBox after switching to FST280. 2020-06-21 11:27:30 -04:00
Joe Taylor
f04c9d2267 Mark the FST280 Ftol range on the waterfall scale. 2020-06-21 10:54:24 -04:00
Joe Taylor
37b1b7aa6f More of "Single Decode". Also, update m_mode in Wide Graph when switching to FST280. 2020-06-21 10:34:24 -04:00
Bill Somerville
af894c6039
Rename files to match class name
Avoiding case insensitive file system issues.
2020-06-21 02:15:31 +01:00
Bill Somerville
b48b23450d
First iteration of optional TCP/IP client for PSK Reporter 2020-06-21 01:36:30 +01:00
Joe Taylor
f8d7489b4e Fix many odds & ends for merging FST280 properly into the GUI. 2020-06-20 13:47:32 -04:00
Joe Taylor
87b79d0615 OK, we can now transmit in FST280 mode. 2020-06-19 15:02:05 -04:00
Joe Taylor
acd04cc050 Correctly restore FST280 submode on program restart. 2020-06-19 11:43:34 -04:00
Joe Taylor
a4e32807d9 Correct WSJT-X's display of UTC in FST280 decodes for TR < 60 s. 2020-06-19 09:59:12 -04:00
Joe Taylor
1cebbd2cdd Enable decoding of FST280 for other T/R sequence lengths. Needs testing! 2020-06-17 19:28:44 -04:00
Joe Taylor
5aeaf5dc78 Include h=8 and NSS=40 in the FST280 decoder. 2020-06-17 14:17:03 -04:00
Joe Taylor
af9f7b21c0 Starting to implement FST280 decoder. Make Rx sequences behave as desired. 2020-06-17 10:56:18 -04:00
Joe Taylor
0e3ff2688a Further progress toward activating FST280 and FST280W in the GUI. 2020-06-16 16:59:40 -04:00
Joe Taylor
4f802cae84 More work toward implementing GUI features for FST280 and FST280W. 2020-06-16 15:56:15 -04:00
Joe Taylor
725933ddca Initial commit with some GUI features for FST280 and FS280W. 2020-06-16 14:58:08 -04:00
Joe Taylor
398414a811 Add file names to widgets.pri 2020-06-16 14:51:59 -04:00
Bill Somerville
9c22b5c3ed
Qt v5.15 compatibility 2020-06-13 16:04:41 +01:00
Joe Taylor
3ad2a4c277 Remove a no-longer-used parameter from calls to lookup(). 2020-06-07 13:32:18 -04:00
Joe Taylor
2973c8dad8 Remove the popup message that "<callsign> was not found in CALL3.TXT". 2020-06-07 13:27:49 -04:00
Joe Taylor
bcfa4526d2 Clear DX Grid after any change in DX Call. (Is this the best way to do it?) 2020-06-07 13:02:27 -04:00
Bill Somerville
d919af68a5
Repair UDP Highlight Callsign regression
When passing the 'Highlight last' parameter as true occasional matches
in prior  periods could be  incorrectly highlighted.  This  fix should
also improve  performance when  there is a  large decode  history, and
highlight request for a new callsign is received.
2020-06-05 17:55:45 +01:00
Joe Taylor
f9780927ab Merge branch 'hotfix-2.2.1' of bitbucket.org:k1jt/wsjtx into hotfix-2.2.1 2020-06-04 11:45:23 -04:00
Joe Taylor
05cd8b3462 Improved logic for the way "Lookup" is processed. 2020-06-04 11:32:19 -04:00
Bill Somerville
a8115a9000
Escape regexp meta-characters in search strings
This resolves the regression where Highlight Callsign UDP messages
fail when the callsign contains a '+' character.
2020-06-04 03:41:11 +01:00
Bill Somerville
8833b56d91
Fix issue with 2D spectrum selection in translated UIs
For completeness  this fixes  the other  occurrence of  widget signals
with text  arguments that are  liable to misbehaviour  with translated
UIs.
2020-06-03 17:43:27 +01:00
Bill Somerville
37bf0f7356
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0 2020-06-01 16:49:36 +01:00
Joe Taylor
3811c1c0be Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0 2020-06-01 11:49:14 -04:00
Bill Somerville
4e9d3e1076
Remove RC expiration and nag message 2020-06-01 16:48:50 +01:00
Joe Taylor
e97164719d Zero the "nDecodes" label if there were no decodes in a sequence. 2020-06-01 11:48:35 -04:00
Bill Somerville
93db29d50a
Highlight Callsign with f/g & b/g invalid restores highlighting
Using a Highlight Callsign UDP message with `Highlight last` false and
specifying  both  f/g  and  b/g  colours as  invalid  now  resets  the
highlighting on any matching callsign,  as well as removing the decode
highlighting internal record.
2020-06-01 16:09:21 +01:00
K9AN
aa4d98b6f1
Fix MSK144 timestamps in ALL.TXT log. 2020-06-01 14:58:44 +01:00
Bill Somerville
1f06a2a948
Avoid text heuristics for macOS special menu actions
These  go wrong  too easily  with l10n,  this ensures  the right  menu
actions are  treated specially  on macOS and  moved to  their "normal"
place on the global system menu.
2020-05-29 20:00:02 +01:00
Bill Somerville
2088ad8597
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0 2020-05-26 19:57:43 +01:00
Bill Somerville
65ef7c47f7
Repair regression defect in WSPR power combo box items 2020-05-26 18:00:14 +01:00
Joe Taylor
eeed9b5a2e Don't allow restart with "ISCAT B" mode label unless VHF features are enabled. 2020-05-26 10:28:14 -04:00
Joe Taylor
c7ac74b2dc Correct the restoration of WideGraph, EchoGraph, nd FastGraph after minimization. 2020-05-25 09:35:31 -04:00
Bill Somerville
c6688534cd
Performance improvements to decode highlighting
The Highlight  Callsign (13)  UDP message now  operates in  a slightly
different way.  The  "Highlight last" field, when  true valued, causes
all  instances of  the specified  callsign  to be  highlighted in  the
decoding  period. This  allows external  applications to  highlight DX
callsigns even when  multiple stations are calling  them.  Before this
was  unlikely to  work since  the external  application would  have to
respond to  Decode (2) UDP  messages exceedingly quickly  to guarantee
successful highlighting  before another decode  with the same  DX call
was  printed.   There  should  be  no  changes  required  to  external
applications acting  as servers  to the  WSJT-X UDP  Message Protocol,
although  using  the  version  of the  Highlight  Callsign  (13)  with
"Highlight   last"  should   not  be   required  for   adhoc  callsign
highlighting. It should be reserved for commonly recurring targets and
limited to  no more than 100  active highlighting requests at  any one
time, otherwise there may be performance impacts on WSJT-X.
2020-05-24 16:33:14 +01:00
Joe Taylor
628eab2cb6 Don't clear the Hold Tx frequency box at unwanted times. 2020-05-23 10:56:17 -04:00
Joe Taylor
8a572eb4a2 Add a mode label color for FT4, and fix a typo. Thanks to Yukio, JG1APX! 2020-05-23 09:05:01 -04:00
Joe Taylor
f62cdb4f37 Fix crash after the message "Double clicking is not supported in ISCAT mode". 2020-05-22 11:56:00 -04:00
Joe Taylor
bcdc12d210 Allow FT4 to use NA VHF Contest messages. 2020-05-21 12:05:51 -04:00
Bill Somerville
e43cb59bd0
More translatable strings in the UI 2020-05-19 12:28:58 +01:00
Bill Somerville
84f153517a
Made more strings translatable 2020-05-19 12:26:51 +01:00
Bill Somerville
cfeb2dda3f
Cosmetic punctuation for translation 2020-05-19 01:45:39 +01:00
Bill Somerville
a65bffb00b
Remove auto-default property from wide graph button
This avoid accidental palette switches by hitting ENTER.
2020-05-17 23:29:11 +01:00
Bill Somerville
76a846a319
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0 2020-05-15 14:42:53 +01:00
Bill Somerville
c9977e2a9c
Fix the minimum size of help text windows to the content size
This could make  help text windows bigger than the  screen, if we want
to  go there  then  using  a QLabel  sub-class  will  need to  change,
probably  by using  a  read-only QTextEdit  instead  as that  provides
scroll bars. Maybe  consider a multi-column table for  the contents as
an alternative to scroll bars.
2020-05-15 14:42:03 +01:00
Joe Taylor
ab1a433a1e Updte to shortcuts.txt. 2020-05-14 15:07:15 -04:00
Joe Taylor
257f4b4999 Another attempt at red/green "goal post" markers that users will like. 2020-05-13 13:44:06 -04:00
Joe Taylor
e6b6a3ab5b Bug fix for compound callsigns used with EU VHF Contest messages. 2020-05-13 11:54:25 -04:00
Bill Somerville
ce15159aaa
Fix an offset issue with the WSPR Tx power drop down list 2020-05-13 04:06:40 +01:00
Bill Somerville
4de6f73f1b
Restore start decodes behaviour at top for FT8 segmented decoding 2020-05-12 01:39:46 +01:00
Joe Taylor
7e3115e3d1
I believe these changes fix the "missing blank line" bug. Please watch for a counter-example! 2020-05-11 20:13:51 +01:00
Joe Taylor
bc8173a395 Don't allow reading a .wav file while decoder is busy. 2020-05-07 14:35:46 -04:00
Bill Somerville
1403c186d2
Updates for Qt v5.14 compaibility 2020-05-07 02:56:57 +01:00
Joe Taylor
c5d14da4a1 Add G4WJS and K9AN to title and authorship credits. 2020-05-06 09:38:09 -04:00
Bill Somerville
8c4af5dba7
Update version string in RC time out warning 2020-05-04 14:05:20 +01:00
Joe Taylor
0e29df1145 Enable the "RC" warning message for v2.2.0-rc1. 2020-05-03 13:56:25 -04:00
Joe Taylor
67e4c8855a Warning message: "Fox-and-Hound operation is available only in FT8 mode". 2020-05-03 11:46:56 -04:00
Joe Taylor
292d6454c3 Warning msg: "EU VHF Contest messages require a 6-character locator." 2020-05-03 11:23:38 -04:00
Joe Taylor
aa2c965b85 Don't display Fox or Hound on labDX in FT4 mode. Fox/Hound is only available in FT8 mode. 2020-05-02 11:54:20 -04:00
Joe Taylor
38db927673 Fix another bug: I believe all contest modes autosequence properly now. 2020-05-01 16:39:40 -04:00
Joe Taylor
f3e0eed06b Correct bug in RTTY RU autosequencing introduced with the new EU VHF Contest message format. 2020-05-01 13:33:27 -04:00
Joe Taylor
9709b19585 Better format for warning message. 2020-04-30 15:05:28 -04:00
Joe Taylor
a81c9acdce Offer instruction in the "Should you switch to EU VHF Contest?" messagebox. 2020-04-30 14:44:51 -04:00
Joe Taylor
ef1c8b079c Aid for color blindness: darken the green used to mark Rx freq and signal BW. 2020-04-30 12:15:23 -04:00
Joe Taylor
f4c0e7803b Don't crash after double-click on a EU_VHF message with <...>. 2020-04-25 16:28:05 -04:00
Joe Taylor
47a3f9c736 Don't allow hijacking of EU VHF Contest QSOs. (Why is this change necessary?) 2020-04-25 12:11:20 -04:00
Joe Taylor
ee04d864cf Correct for "deCallAndGrid" not working for EU VHF contest messages. 2020-04-24 10:33:23 -04:00
Joe Taylor
d657da5980 Don't switch automatically to EU VHF Contest mode. 2020-04-23 16:15:19 -04:00
Joe Taylor
7b444b855b Fix an index value. Better approach: fix parsing in decodedtext.cpp. 2020-04-22 14:45:43 -04:00
Bill Somerville
e51bfc8397
Fix a QStringList bounds error in auto-sequencing 2020-04-22 18:32:00 +01:00
Joe Taylor
185901e518 Auto-sequences QSOs with EU VHF Contest messages now work OK. 2020-04-22 13:08:45 -04:00
Joe Taylor
47f47a313f Fix a lonstanding bug that causes crash when logging incomplete EU VHF Contest data. 2020-04-22 11:51:30 -04:00
Joe Taylor
428bb96ce8 Temporary commit to help in finding a bug. 2020-04-22 11:34:06 -04:00
Joe Taylor
8253f359bc First cut at auto-sequencing for the new-style EU VHF Contest messages. 2020-04-21 15:50:27 -04:00
Bill Somerville
f286a24710
Ensure that break lines are printed when decoder is aborted
This  change  also  moves  some   other  decode  finished  logic  into
MainWindow::decodeDone().
2020-04-18 00:22:07 +01:00
Joe Taylor
75f0e40e8a Make "Hold Tx Freq" invisible in JT4, QRA64, and JT65/VHF. 2020-04-17 16:10:47 -04:00
Joe Taylor
35eb391e23 Clean up the formation and display of JT4 average and DS decodes. 2020-04-17 12:14:43 -04:00
Joe Taylor
800ed045b6 Remove some obsolete, commented-out code. 2020-04-15 13:41:45 -04:00
Joe Taylor
dc71fd70d5 Stated WSPR power levels below 0 dBm are not allowed. Remove them from TxPowerComboBox. 2020-04-14 12:12:53 -04:00
Joe Taylor
b6e2fa82c0 Update copyright notice to 2020. 2020-04-10 11:19:42 -04:00
Joe Taylor
c188f8ee89 More cleanup of the display of special JT65 decoding modes: avg, deep, AP. 2020-04-09 13:56:35 -04:00
Joe Taylor
0390791090 Fix some problems with message averaging, etc., in JT65 with VHF features enabled. Needs further testing! 2020-04-08 16:56:28 -04:00
Joe Taylor
9d2b2b1a56 Maintain visibility of AvgMsg window when it has been activated. 2020-04-08 10:56:11 -04:00
Joe Taylor
d69da851c1 Fix the 'OO O' display problem for some JT65 decodes. 2020-04-07 18:26:30 -04:00
Joe Taylor
c46ec025e0 For "D4C/B HK76": Make FT8 beacon transmissions only at top of a UTC minute. 2020-04-07 09:39:48 -04:00
Steven Franke
3f7b06853e Make wspr work again. 2020-03-21 14:44:17 -05:00
Joe Taylor
a39470cb6f FT4 should always use RR73 in Tx4. 2020-03-20 09:32:02 -04:00
Joe Taylor
fe33bcdd6c More cleanup after making "Save None" mean NO SAVING AT ALL. 2020-03-19 15:41:18 -04:00
Joe Taylor
7de6b8c98d Remove diagnostic writes. Don't save .wav files if "Save None" is selected. 2020-03-19 14:46:41 -04:00
Joe Taylor
d4d37c49ab Silence compiler warnings. 2020-03-19 12:04:56 -04:00
Joe Taylor
7564301209 Silence compiler warnings. 2020-03-19 11:43:22 -04:00
Joe Taylor
aff8229fef For non-FT8 modes, reset m_nDecodes to 0 after receiving <DecodeFinished>. 2020-03-17 14:39:15 -04:00
Joe Taylor
2653626d45 Replace the changes I removed by executing 'git reset HEAD~'. 2020-03-16 10:27:22 -04:00
Joe Taylor
3962aa3c43 Replace hijacked ss(1:3,1) with a separate ipc(3) array. 2020-03-15 14:25:56 -04:00
Bill Somerville
46638f6f07
Add shared memory synchronization to make access safe 2020-03-15 00:25:35 +00:00
Joe Taylor
649a79dfc1 New IPC trial: use shmem instead of .start .stop .quit files. 2020-03-14 17:06:54 -04:00
Bill Somerville
523e9a1a07
Enhanced process control for jt9 executable
The wsjtx  process creates control  files .start, .stop, or  .quit and
the jt9  process deletes  them.  This  is intended  to avoid  any race
conditions that get the processes out of sync.
2020-03-14 00:01:54 +00:00
Joe Taylor
ebf4952c7c Auto-clear of hung decoder status. 2020-03-13 14:25:12 -04:00
Joe Taylor
8151816c84 Change formats of diagnostic writes so that GUI and Fortran output can be sorted together. 2020-03-13 11:25:22 -04:00
Joe Taylor
fedb72a38c Set m_nDecodes=0 only after the 50-buffer decode pass. 2020-03-12 16:52:19 -04:00
Joe Taylor
afe0262ec9 Previous commit message should have mentioned number of decodes is now displayed on status bar. 2020-03-12 15:11:20 -04:00
Joe Taylor
8e7685ea36 Do not alolow bailouts when data were read from disk. 2020-03-12 15:07:56 -04:00
Joe Taylor
6e308f0018 More attempts to diagnose or fix the FT8 "hung decoder" issue.
On the Fortran side:
 - For the nzhsym=41 activation, bail out if m_ihsym reaches 45
 - For the nzhsym=47 activation, bail out if m_ihsym reaches 48
 - Change the format and content of what's written to fort.71
 - Change msdelay from 10 to 1

In mainwindow.cpp:
 - change format and content of what's written to qDebug
 - always start FT8 decoder at m_ihsym = 41, 47, and 50
2020-03-12 12:33:34 -04:00
Bill Somerville
6a7263dc94
Add escape route from retries of IPC errors 2020-03-11 22:38:41 +00:00
Bill Somerville
c58a690bf1
Add error checking to jt9 process control by .lock/.quit files 2020-03-11 22:26:41 +00:00
Joe Taylor
4d9c9e08e2 If 47-buffer call takes too long, start the 50-buffer call late. 2020-03-11 16:03:51 -04:00
Joe Taylor
d69cb49e9a Diagnostic writes to fort.71 in jt9a.f90. 2020-03-11 14:02:19 -04:00
Joe Taylor
199ff3dd3d Experimental work-around for FT8 decoding on slow computers. Important changes:
- don't start function decode() is decoder is already busy
  - send updated m_ihsym to jt9[.exe] via ss(1,1).  Bill won't like this!
  - jt9 bails out of the 41-buffer pass at m_ihsym=45.
2020-03-10 16:26:42 -04:00
Joe Taylor
592f4eea71 Remove a qDebug() call. 2020-03-09 15:29:57 -04:00
Steven Franke
f2266c3c54 1. subtractft8: on the last call to sqf, don't need to do the long FFT.
2. mainwindow.cpp: based on the time when <DecodeFinished> is received, calculate
mswait to try to place the killFile time at 0.75*m_TRperiod.
2020-03-06 11:06:44 -06:00
Joe Taylor
431ec50212 Progress toward decoding at 41/47/50 buffers. Not yet complete! 2020-03-05 15:37:31 -05:00
Steven Franke
6773768586 Clean up the timestamp adjustment logic, and make the threshold 0.5*TRperiod. 2020-03-05 11:25:49 -06:00
Steven Franke
07c753e284 Make ALL.TXT Rx timestamp equal to the beginning of the TR period, even if the decode comes in after the start of the next TR period. Make Tx timestamp the actual time that Tx started. 2020-03-05 11:16:56 -06:00
Joe Taylor
8e7a56634b Set nearly=41; don't write <DecodeFinished> after the early decode pass. 2020-02-28 15:03:39 -05:00
Joe Taylor
b9888a09ff Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-02-26 13:16:12 -05:00
Joe Taylor
6afff5821e Correct the times written to ALL.TXT when decode occurs after the T/R boundary. 2020-02-26 13:15:22 -05:00
Steven Franke
0ca6cbb575 wsprd: improve decoding and reduce the number of false decodes
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
2020-02-25 10:48:38 -06:00
Joe Taylor
4a4864d2ae FT8 early decoding is now working. 2020-02-13 15:05:37 -05:00
Steven Franke
70b84478f0 Add WW_DIGI to the special activities section. Make necessary changes to
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
2020-01-24 11:26:36 -06:00
Steven Franke
a63e6e1209 - Force the use of standardized CQ modifier for FT4/FT8 contest operation.
- Pass CQ modifier string to the ft4 decoder.
2020-01-08 08:41:47 -06:00
Bill Somerville
75c9e1d696
Fix a patching error 2019-12-29 12:34:02 +00:00
Bill Somerville
5e3781e9e9
Correct some UI text typos
Thanks to Christoph, DF7CB, for providing a patch for these typos.
2019-12-29 12:25:59 +00:00
Bill Somerville
5a23edbbae
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2019-12-08 18:42:06 +00:00
Bill Somerville
485f787cef
Increase maximum SNR filter value in Fox mode to 70dB
This change abandons the previous settings file key for this control
so that all users pick up the new default of 70dB.
2019-12-08 18:39:37 +00:00
Bill Somerville
32c36f566d
Use DB date time field item delegate to imbue editing in log windows 2019-12-08 18:37:35 +00:00
Joe Taylor
7540d2137a For accessibility: Alt+R sets Tx4 message to RR73, Ctrl+R to RRR. 2019-12-05 11:27:17 -05:00
Bill Somerville
fb1b2e7687 Tagging the WSJT-X v2.1.1 release
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a8/QACgkQ2GSwbR6B
 YY8y+ggAqwaaCRMCSwDzStooYjStJErVoZ/yB//MmoF+798TBb+3MkiT+KclW7aN
 rxTOmEJ+a84PmsiW6Qz/AAcHPnbKDhtwWASZooopgNYDfgyaUib3HfIa+cFJO6my
 OUzlTsH94yDxeBCWOtf1dLiP0YwJKfp/vxzbfDAWXTd4dx3Ok/7KwghYocmP3eCq
 ruZ+dWojQzwE+h50P6B9gTFxGWMHUDDNeZ/c8u494wqDQvQaRoM9oOnQWzlGiMis
 JaerraI52JEdFLnXjtLYeyXtfg+zA0KvRY2DWy1aCPpGkNjy3DPNlOA+cDQpzBru
 NIqsUF+GplgkVs3sKNLXq36ZgaBQBg==
 =5w4B
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a9R8ACgkQ2GSwbR6B
 YY9SWQf+JdfIvlHy8ExSs9ImCLck/e66V2OAqaEONQX1bEC4QiG3M/rVJGgf2iFz
 ZFshtilsajlpsYZQIFToTmJmI76eGLAmyNIcZN2WpcJQMNWZnxqklMj2wIHbRh+g
 Pvw3FC+lc4LUjZCCMYrVjNXxsRmQtjqV1lVFBnmrAWCdrgHmhyrVbPZT4B+fRTXL
 ikw/BiRgxhI0aoIWKzNrtztMYUBjanKLTHE81AVgsgZkBDNybOjR7mE2E/Jwc4Qx
 mVu+Z0uI+bVuBlMOrqp0K+rrUz7qMZe5/AMSRbgzwfueEOIShgu2wrfV++3JDXLH
 AhtIAcL/b39RBx0jkFE8rBKaZpkoAw==
 =DNp6
 -----END PGP SIGNATURE-----

Merge tag 'wsjtx-2.1.1' into develop

Tagging the WSJT-X v2.1.1 release
2019-11-24 21:24:39 +00:00
Joe Taylor
849e8c7c55 When using EU VHF Contest messages, update the received exchange m_xRcvd only if decoded messages is addressed to me. 2019-11-18 14:00:42 -05:00
Bill Somerville
58c901240b
Use call, mode, and frequency from Log QSO for worked before records
The current frequency,  mode and, call were incorrectly  being used to
create a new  worked before record from a logged  QSO. This meant that
band changes  etc. made  before clicking  "Ok" to log  a QSO  would be
erroneously attributed to the worked before records.
2019-09-17 21:04:34 +01:00
Bill Somerville
a3efe8117c
Qualify regeneration of GFSK message regeneration to only when Txing 2019-09-07 21:23:39 +01:00
Bill Somerville
137bc1ccab
Tx waveform regeneration for GFSK modes Tx audio offset change 2019-08-15 15:20:45 +01:00
Bill Somerville
cefadfeaa3
Disable auto Tx before logging dialog shown even if disable Tx on 73 is not set 2019-08-13 00:20:40 +01:00
Joe Taylor
79b805b0e7 The start of some code for computing QSO points in WWROF/SCC digi-contest. 2019-08-08 09:55:08 -04:00
Joe Taylor
f265fa83f5 Disable the "not GA" warning message. 2019-07-18 15:30:33 -04:00
Bill Somerville
28f5cb0fb9 WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qXxcACgkQ2GSwbR6B
 YY/ZGAf8Da+a+83dpnj5dnosIKWwSwgpiWHY0JKzm8fp0n3hcs5+rV1/gM81xXKT
 J3lbHWykGzMYlZNoEw3eNwQbXzOCf/7mOaeTKJQnBLukMpTLmsz5b5nYaCjvvRGM
 6HKSddNS3Q4iz4qdakOgWnqdZeYJkRR3Z3XsTmlrG02GsSVlbXzOEyceooqM6EGd
 w5WTkvpls+43OzwcGJ50SHzPlBAJYycE9vrAxxFOxU2fhqRRD/ttMZmUmjRY7Iqa
 jRRQ39K1Io7i9QG/3V6FBZDttqeFfvvlkVzH0/TeMeCUOQiKbzuGxM01PJ6be7D1
 H114v5l06GH56T7qpaF0IB2ZStkbrA==
 =voDy
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl0qX30ACgkQ2GSwbR6B
 YY8p0QgAgt8Y/yLCyFw0+wfO2h8yIFyh2j1c8EfBf0+I/2xaIYMUfPPlmC3jkWhw
 mtoCJVKkpCNcxr9mo6wjQp7x90pRUH3k78O0VtzbKWz7lveoN7Vguo+iVHDbEhUA
 a9E6yMwvskH5Mr6+cFiS4EVYyjAsuG/BL+4FFMDUVQOaKXNBbgJuc2mjpHkcnEbK
 C+XUxipcAUElH1Ks90eHT/vLoowAOP9jo0xSR1RqJMJlaKHxWZivsBCfQdI1xxn0
 arlQO3bjIsxyNq/Ru7XWV5C56JmWjoPWCcqt5GRrNJLwGw/haSuDIMURaE/vrMif
 csar293vcm5PzuTADArTQkhqK951pQ==
 =1mJJ
 -----END PGP SIGNATURE-----

Merge tag 'wsjtx-2.1.0' into develop

WSJT-X General Availability Release v2.1.0 wsjtx-2.1.0
2019-07-13 23:47:18 +01:00
Joe Taylor
ced74644fd On startup or switching to QRA64 mode, set Tx and Rx audio freqs to 1000 Hz. 2019-07-09 14:59:34 -04:00
Bill Somerville
01aaa852e3
Updates to support Qt v5.13
Replacement of deprecated Qt functions and member functions.
2019-07-08 01:37:04 +01:00
Bill Somerville
ab9675c2a7
Squash several compiler warnings 2019-07-03 01:51:40 +01:00
Bill Somerville
40cf45c259
Squash a compiler warning 2019-07-03 01:25:25 +01:00
Bill Somerville
cee3c9796f
Squash a compiler warning that was also a potential defect 2019-07-03 00:16:39 +01:00
Bill Somerville
a27668428b
Cleaner warning sidestep 2019-07-02 21:07:43 +01:00
Bill Somerville
e7ace39e44
Fix a warning 2019-07-02 19:33:09 +01:00
Chris Karpinsky
a30d97fb57 Merged develop into feat-refactor 2019-07-02 13:11:40 -05:00
sirhc808
dd53e8d348 incorporate code review feedback 2019-07-02 13:00:32 -05:00
sirhc808
1f57ba5fec improve physical structure 2019-07-02 12:45:05 -05:00
sirhc808
27d4471cde Merge branch 'ft9_refactor' into feat-refactor
# Conflicts:
#	CMakeLists.txt
#	lib/ft4/getcandidates4.f90
#	lib/ft4/sync4d.f90
2019-07-02 12:06:14 -05:00
sirhc808
ee5d5c8ae9 improve physical structure 2019-07-02 10:19:43 -05:00
sirhc808
84fd0ed7c7 clean up a few warnings 2019-07-01 21:10:43 -05:00
Bill Somerville
1968597783
Merge branch 'release-2.1.0' into develop 2019-07-02 00:18:22 +01:00
Bill Somerville
adcf202637
Repair a crash when decoding ISCAT
Passing a  auto stack variable to  a future is  not a good idea  as it
will almost certainly  go out of scope before the  future has finished
executing.
2019-06-30 12:17:17 +01:00
Bill Somerville
c65d832356
New UDP messages to close and reconfigure WSJT-X plus more status fields
The Status(1) message acquires the new fields Frequency Tolerance, T/R
Period,  and  Configuration Name.  The  Rx  DF,  Tx DF  fields  become
unsigned (this should be a benign change which is just for correctness
as -ve values have never been possible).

The   Close(6)  message   becomes  bi-directional   allowing  external
applications to gracefully close down WSJT-X instances.

A  new  message SwitchConfiguration(14)  is  provided  that allows  an
external application to  switch the current configuration  of a WSJT-X
instance.

Another  new  message  Configure(15)  is provided  to  allow  external
applications to adjust some key parameters like the mode and submode.

See the  NetworkMessages.hpp header  commentary for full  details. The
UDPExamples/MessageAggregator reference  application has  been updated
to be able to exercise all of the above changes.

Note   that   this   commit   enforces  stricter   checking   on   the
"Settings->Reporting->Allow  UDP  requests"   option,  which  must  be
checked  before  any state  changing  incoming  messages to  a  WSJT-X
instance are processed.
2019-06-25 14:35:58 +01:00
Bill Somerville
91aa591a71
Better ADIF conformance for ARRL Field Day mode
This change may break N1MM Logger+ integration, notably the CLASS ADIF
field is  populated which may not  be recognized by N1MM  Logger+, nor
interfaces to it.

One exception to  ADIF conformance is that the ARRL_SECT  field may be
populated with  the value DX  despite it  not being a  valid ARRL_SECT
enumeration value. This is done for consistency with N1MM Logger+ ADIF
exports.
2019-06-24 00:56:41 +01:00
Bill Somerville
3f5a996842
New UDP message SwitchConfiguration(14) to switch to an existing configuration
The Status(1) message also acquires  the current configuration name as
a new  field. See  NetworkMessage.hpp for  details. The  UDP reference
example program message_aggregator acquires the ability to display and
change  the configuration  of a  WSJT-X client  to exercise  these new
features.
2019-06-13 01:44:28 +01:00
Bill Somerville
ef21239a9b
Merge branch 'f2008' into release-2.1.0 2019-06-07 17:24:30 +01:00
Bill Somerville
067692cd1e
Disable automatically enabled toolbar on Mac
Qt automatically adds a "Menu->View->Show Tab Bar" button, this
change disables that as we don't have a tool bar or tab bar.
2019-06-07 17:21:57 +01:00
Bill Somerville
77094c88bf
Merge branch 'release-2.1.0' into f2008 2019-06-07 17:17:01 +01:00
Joe Taylor
3ff672705f Change the F11/F12 frequency increments for FT4 to +/- 90 Hz. 2019-06-06 14:14:11 -04:00
Joe Taylor
9c3c5d6b3c Turn Tx Enable to OFF after logging a QSO, even if "Clear DX call and grid after logging" is not checked. 2019-06-06 11:58:52 -04:00
Bill Somerville
f346d37fd6
Modernize Fortran interfaces that are called from C/C++
Making Fortran  interfaces called from other  languages fully portable
avoids issues with newer Fortran compilers.
2019-06-06 15:00:47 +01:00
Bill Somerville
45b12e6028
Preparation for UI i18n
Re-enabling the WSJT-X i18n  facilities. This allows translation files
to  be created  for languages  that are  automatically used  to lookup
translatable strings. To enable a  new language the language name must
be added to the CMakeLists.txt LANGUAGES list variable in BCP47 format
(i.e. en_US,  en_GB, pt_PT, ...). Do  one build with the  CMake option
UPDATE_TRANSLATIONS enabled  (do not  leave it enabled  as there  is a
danger of loosing existing translated texts), that will create a fresh
translations/wsjtx_<lang>.ts file which  should be immediately checked
in with the  CMakeLists.txt change. The .ts should then  be updated by
the translator using  the Qt Linguist tool to  add translations. Check
in the  updated .ts file  to complete the initial  translation process
for that language.

To  aid translators  their WIP  .ts file  may be  tested by  releasing
(using the  lrelease tool or  from the Linguist  menu) a .qm  file and
placing  that  .qm  file  in the  current  directory  before  starting
WSJT-X. The translations will be used if the system locale matches the
file name.   If the system  locale does not  match the file  name; the
language may be  overridden by setting the  LANG environment variable.
For  example if  a wsjtx_pt_PT.qm  file  is in  the current  directory
WSJT-X will use it for  translation lookups, regardless of the current
system locale setting, if the LANG variable is set to pt_PT or pt-PT.

On MS Windows from a command prompt:

 set LANG=pt_PT
 C:\WSJT\wsjtx\bin\wsjtx

elsewhere:

 LANG=pt_PT wsjtx
2019-06-06 12:56:25 +01:00
Bill Somerville
ca41934b68
Repair an object instance initialization order issue that causes crashes
The  background  thread  running  the  ADIF log  load  needs  a  valid
configuration object as  it now depends on the  "Include WAE entities"
option.
2019-06-03 00:35:20 +01:00
Bill Somerville
19c46774b4
Moving toward multiplier and dupe detection for contest modes
There's not  much to show  for this so far  but some of  the necessary
infrastructure is in place.
2019-05-30 22:20:09 +01:00
Bill Somerville
381faca99a
Add option to include or exclude WAE extra entities in DXCC entity lookups
Also  refactored  object  relationships  as a  start  to  implementing
contest multiplier highlighting.
2019-05-29 23:35:18 +01:00
Bill Somerville
a54140582a
Tidied up cut-off criteria 2019-05-29 20:47:11 +01:00
Joe Taylor
dce016f6eb Disable RC6 during ARRL June VHF contest, Field Day, and after July 21, 2019. 2019-05-28 12:09:34 -04:00
Bill Somerville
67ab7c7b8b
Add Alt+O hotkey to change the operator quickly without going to the Settings dialog
Thanks to Jim, W2JC, for suggesting this enhancement.
2019-05-28 12:18:54 +01:00
Joe Taylor
a521000775 No need to test FT4 and FT8 messages for trailing "f" or "d" indicators. 2019-05-24 11:04:30 -04:00
Joe Taylor
d5cd9db696 In FT4 mode, Shift+F11/F12 should move Tx freq by +/- 100 Hz. 2019-05-24 10:42:30 -04:00
Joe Taylor
637d4d0411 "Force Call 1st" must also force AutoSeq. 2019-05-24 08:31:56 -04:00
Joe Taylor
7334ebb20b New user option: "Calling CQ forces Call 1st". 2019-05-23 14:31:08 -04:00
Joe Taylor
dfedc40db1 Fix some timing issues resulting from non-integral m_TRperiod for FT4. 2019-05-23 13:24:35 -04:00
Joe Taylor
8761ccef9b Received data length for FT4 should be 21*3456 = 72576 samples = 6.048 s. 2019-05-23 09:23:58 -04:00
Steve Franke
a9623703b3 FT4: Change Fortran code to NSPS=576 and make necessary accompanying
changes on the C++ side. Basically works except that Tx audio has
incorrect DT and audio is truncated at the end. Also, command line
decoding using JT9 is not as sensitive as decoding from within WSJT-X.
2019-05-22 17:02:15 -05:00
Joe Taylor
912e40876a Disable the "not_GA_warning_message", for now. 2019-05-22 13:06:16 -04:00
Joe Taylor
0d3be0128b Change m_TRperiod from qint32 to double. Functional, but needs more testing! 2019-05-22 12:44:28 -04:00
Bill Somerville
1c3b554384 Revert "Log buttons"
This reverts commit 9e75b5c2b5.
2019-05-06 22:25:06 +01:00
Bill Somerville
1a914e980b Revert "Add background colour to Log QSO buttons as stronger visual cue"
This reverts commit a8a1d8d0a7.
2019-05-06 22:25:01 +01:00
Bill Somerville
27a0182ab7 Revert "Revert to colouring just the OK Log QSO button to help with colour-blindness accessibility"
This reverts commit b9e194b74f.
2019-05-06 22:24:51 +01:00
Steve Franke
0d1b438b91 FT4: Fix generation of Tx5 when one callsign is nonstandard. 2019-05-04 09:33:53 -05:00
Bill Somerville
bd07a6e755 Add default QDateTime delegate editor 2019-05-04 01:02:16 +01:00
Bill Somerville
b79cf0df99 Improvements to accessibiity
Where  tool  tips are  defined  in  rich  text, equivalent  pain  test
accessible descriptions have been added  so that screen readers do not
announce HTML tags.

Refactored date time  delegates to use a simpler default  editor via a
default  item editor  factory for  QDateTime values,  the editor  is a
standard QDateTimeEdit with a format that includes seconds and renders
assuming the time is UTC.

Modified the Cabrillo log and Fox log database table models to provide
QDateTime items  for the edit role  of date time fields,  and formated
date time strings including seconds and assumed as UTC for the display
role.
2019-05-03 10:21:50 +01:00
Joe Taylor
8104d80998 Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0 2019-04-30 16:03:01 -04:00
Joe Taylor
c7a388f740 Send FT4 audio frequency to PSK Reporter. 2019-04-30 16:02:26 -04:00
Bill Somerville
3916316a1c Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0 2019-04-30 15:43:01 +01:00
Bill Somerville
b9e194b74f Revert to colouring just the OK Log QSO button to help with colour-blindness accessibility 2019-04-30 15:33:01 +01:00
Bill Somerville
b29a6d14ea Workaround for a crash on macOS when compiling with gfortran 8.3 2019-04-30 15:13:26 +01:00
Joe Taylor
b2d6238b63 Fix a bug that caused FT4 to do WSPR band-hopping. 2019-04-30 09:38:20 -04:00
Joe Taylor
1347f523de Allow RRR message in Tx4, in FT4 mode, if not using contest-style messages. 2019-04-30 09:17:34 -04:00
Bill Somerville
a8a1d8d0a7 Add background colour to Log QSO buttons as stronger visual cue 2019-04-30 04:47:30 +01:00
Bill Somerville
7de974a7ee Fix settings acceptance jumping from FT8 to FT4 mode 2019-04-29 19:53:59 +01:00
Bill Somerville
a28402c527 Avoid a crash when Rx samples arrive before wide graph plotter is ready 2019-04-28 22:20:24 +01:00
Steve Franke
3b8b871a7c Disable AP for mycall if more than 5 minutes since last Tx. Used to be 10 minutes. 2019-04-27 16:38:19 -05:00
Steve Franke
dc66304a65 Improve ALL.TXT formatting for JT9/JT65. Thank you to Sandro, IW3RAB, for submitting this fix. 2019-04-26 20:06:32 -05:00
Joe Taylor
a19d82e362 Fix a typo. 2019-04-24 09:30:02 -04:00
Joe Taylor
f308d5246e Make the contest serial number spinner visible, where it should be. 2019-04-23 20:20:45 -04:00
Joe Taylor
dc627cb48c Enable QSO types other than RTTY RU in FT4 mode. 2019-04-23 14:16:55 -04:00
Joe Taylor
eaf567747c Fix the "Tx2 for Tx3" bug when using RTTY RU messages. Needs further testing! 2019-04-22 09:42:28 -04:00
Steve Franke
64bd55910a Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0 2019-04-19 15:14:14 -05:00
Steve Franke
25d07fd574 FT4: Hide AP Enable menu pick --- AP is always enabled, for now. 2019-04-19 15:14:08 -05:00
Joe Taylor
f78a9ec7df Insert June 7 timeout date. 2019-04-19 15:42:37 -04:00
Steve Franke
e8d17a9898 FT4: Subtraction is basically working. 2019-04-18 14:16:39 -05:00
Steve Franke
be72461142 FT4: Some groundwork for subtraction. 2019-04-18 14:15:24 -05:00
Joe Taylor
f7b0e24e70 Correct a flaw in recently modified actions for key F6. 2019-04-17 14:53:20 -04:00
Joe Taylor
5826aefedc Let "Best S+P" status time out after 2 minutes. Update the keyboard shortcuts.txt file. 2019-04-16 13:21:45 -04:00
Joe Taylor
b43d91240d New end-of-QSO sequencing logic (possibly temporary) for CQing FT4 station.
When RR73 is received we log the QSO, turn "Call 1st" OFF, and call CQ again.
Also, allow Alt+C and F6 (the latter only if altenrate F1-F6 bindings
are active) to toggle "Call 1st" ON/OFF.
2019-04-15 16:26:41 -04:00
Steve Franke
cd8ea16f40 FT8: Use GFSK waveform with BT=4.0 as reference for subtraction, for now. May want to change to BT=2.0 before v2.1 release? 2019-04-12 17:11:26 -05:00
Joe Taylor
56c1aacbc2 Remove a diagnostic qDebug(). 2019-04-09 22:03:59 -04:00
Joe Taylor
2633f6fb6d Make the label red, not the whole button. 2019-04-09 20:12:48 -04:00
Joe Taylor
2b42650a73 Make the "Best S+P" button red when activated. 2019-04-09 08:48:13 -04:00