Bill Somerville
56741d5e10
Merge branch 'develop' into feat-dropped-frames
2020-08-29 14:05:52 +01:00
Bill Somerville
64f29318aa
Repair an auto-sequencing defect with UDP Reply message handling
2020-08-29 14:04:29 +01:00
Bill Somerville
3a71184040
Include period start time in dropped samples message box details
2020-08-22 18:12:12 +01:00
Bill Somerville
d1860df190
Only send local station info to PSK Reporter when necessary
...
Remove unneeded debug trace messages.
2020-08-18 12:47:17 +01:00
Bill Somerville
4a2a181528
Merge branch 'develop' into feat-fst280
2020-08-17 18:33:00 +01:00
Bill Somerville
b1c53bc332
Fix a cosmetic FT6 DXpedition mode Hound issue that causes an assert
2020-08-17 01:52:47 +01:00
Bill Somerville
536e6568a6
FST4* messages do not need padding out to 37 characters
2020-08-16 02:34:18 +01:00
Bill Somerville
50da40413f
PSK Reporter connection opened & closed at the correct times
2020-08-16 00:38:19 +01:00
Bill Somerville
491a7b9a05
Ensure no connect with, or traffic to, PSK Reporter if not enabled
2020-08-15 23:32:10 +01:00
Bill Somerville
b984390711
Fix PSK Reporter spots of FST4W decodes with power <10 dBm
2020-08-15 23:29:53 +01:00
Bill Somerville
632e2c2ae9
Merge branch 'develop' into feat-dropped-frames
2020-08-15 20:03:47 +01:00
Joe Taylor
dad9199f24
Disable double-clicking on an FST4W decode. It serves no useful purpose.
2020-08-15 14:31:18 -04:00
Bill Somerville
ec623deb9f
More consistent Tx Next button behaviour
2020-08-15 15:57:29 +01:00
Bill Somerville
e17ad223ae
Tx Next button enables automatic Tx
...
Also a number of WSPR/FST4W code clean-ups including getting the Tx
Next button to function as intended.
2020-08-15 02:57:23 +01:00
Bill Somerville
7eb229ecde
Reduce Tx audio buffer size improve Pwr control granularity
2020-08-13 10:31:23 +01:00
Bill Somerville
11abe7c60f
Cosmetic reformating
2020-08-13 10:30:49 +01:00
Bill Somerville
185f570136
Avoid accessing shared memory after it has been deleted
2020-08-11 20:07:00 +01:00
Bill Somerville
e27b09b590
Revert Tx status widget on status bar to non-permanent placement
2020-08-11 16:09:51 +01:00
Bill Somerville
8e37dbd8c1
Increased threshold for status message and warning on dropped frames
2020-08-11 16:08:21 +01:00
Bill Somerville
0cf14dfcc9
Remove user adjustable audio buffer sizes from Settings
...
Fixed buffer sizes are used. Rx use s 3456 x 1st downsample rate x 5
audio frames of buffer space. On Windows this means that each
chunk (periodSize()) delivered from the audio stream is our initial
DSP processing chunk size, thus matching audio buffer latency exactly
with WSJT-X's own front end latency. This should result in optimal
resilience to high system loads that might starve the soundcard ADC of
buffers to fill and case dropped audio frames.
For Tx a buffer sufficient for 1 s of audio is used at present, on
Windows the period size will be set to 1/40 of that which gives
reasonably low latency and plenty of resilience to high system loads
that might starve the soundcard DAC of audio frames to render. Note
that a 1 s buffer will make the "Pwr" slider slow to respond, we may
have to reduce the Tx audio buffer size if this is seen as a problem.
2020-08-11 13:48:01 +01:00
Bill Somerville
1892f39df3
Revert "TEMPORARY: Diagnostic routine for the "Save All" missing files problem."
...
This reverts commit b5765401dc
2020-08-10 01:42:26 +01:00
Joe Taylor
b5765401dc
TEMPORARY: Diagnostic routine for the "Save All" missing files problem.
2020-08-09 22:50:17 +01:00
Joe Taylor
07f63cdb63
Small adjustment to make file names for QRA66-30 modes correct.
2020-08-09 15:48:56 -04:00
Joe Taylor
42626009b5
TEMPORARY: Diagnostic routine for the "Save All" missing files problem.
2020-08-09 14:21:25 -04:00
Bill Somerville
ecf0a146f1
Merge branch 'develop' into feat-dropped-frames
2020-08-08 21:26:51 +01:00
Bill Somerville
94d66bc848
Make FST4W scheduling l10n agnostic
2020-08-08 21:25:32 +01:00
Bill Somerville
2e413713a3
Tidy dropped frame status bar message
2020-08-08 19:40:42 +01:00
Joe Taylor
d683cb6b8e
Updates to GUI for different QRA66 sequence lengths and submodes.
2020-08-08 14:37:01 -04:00
Bill Somerville
02e19b687f
Status message to report approximate # of dropped Rx audio frames
...
This is a first cut at this to evaluate buffer size adjustments on
supported platforms. A final version might limit status bar reports to
>1000 dropped frames or similar.
2020-08-08 17:12:48 +01:00
Bill Somerville
a0ceace5b4
User configurable audio device buffer sizes
...
Adjusting these may help with audio drop-outs, particularly on slower
CPU systems or heavily loaded systems. Smaller buffer sizes leave less
margin for process interruptions, larger sizes waste resources that
could impact other processes.
2020-08-08 16:25:14 +01:00
Joe Taylor
bf38f4416c
Modifications to give QRA64 use of longer TR periods and tone-spacing submodes. Noy yet finished, or tested!
2020-08-08 09:14:12 -04:00
Bill Somerville
bf58cd43aa
Improve contrast of coloured widgets in dark style
2020-08-08 13:20:52 +01:00
Bill Somerville
0ba5d7e1bf
More flexibility for QDateTime round/truncate routine
2020-08-07 21:31:48 +01:00
Joe Taylor
7256d70016
QRA66: change NSPS from 1920 to 1800. TxT=85*1800/12000=12.75 s.
2020-08-05 11:06:18 -04:00
Joe Taylor
2bb9566731
In QRA66 mode, make unused widgets invisible.
2020-08-05 09:37:03 -04:00
Bill Somerville
fb8b938ac7
Make FST4 std message generation consistent with other 77-bit modes
2020-08-04 11:43:19 +01:00
Joe Taylor
e32c5b699d
Update Wide Graph and plotter.cpp for QRA66.
2020-08-01 13:37:31 -04:00
Joe Taylor
3867c452e6
Changes to GUI to accommodate QRA66. It's basically functional, I think.
2020-08-01 12:13:49 -04:00
Bill Somerville
92cf7b29c2
Merge branch 'develop' into feat-fst280
2020-07-31 15:00:50 +01:00
Bill Somerville
b05bfecb5f
Avoid arithmetic errors when parsing the round-robin current text
2020-07-31 12:39:08 +01:00
Bill Somerville
c2b835c42b
Translatable help windows
2020-07-29 18:44:34 +01:00
Joe Taylor
846b0b6ed8
Fix the problem "Tx did not start in the first Round-Robin sequence when it should have started".
2020-07-29 11:58:28 -04:00
Bill Somerville
0f3fc3d15c
Correct time on beacon mode Tx prints in decodes window
2020-07-27 19:51:56 +01:00
Bill Somerville
6cb72a5f3e
Remove duplicate ALL.TXT Tx report in beacon modes
2020-07-27 19:49:39 +01:00
Bill Somerville
3bf070938b
Enable Tx percentage spin box in WSPR and random FST4W modes
2020-07-27 19:48:13 +01:00
Bill Somerville
2bf8888725
Merge branch 'develop' into feat-fst280
2020-07-27 15:02:44 +01:00
Bill Somerville
080e21f6fc
Remove testing code
2020-07-27 15:01:09 +01:00
Joe Taylor
e96dee4c23
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-27 09:57:02 -04:00
Joe Taylor
236e334e71
*** TEMPORARY *** Allow transmitting FST4-15A and FST4-15B simultaneously.
2020-07-27 09:55:49 -04:00
Bill Somerville
c5248bf116
Merge branch 'develop' into feat-fst280
2020-07-27 13:25:28 +01:00
Bill Somerville
bb927a6115
Handle missing user_hardware on non-Windows systems
2020-07-27 13:13:04 +01:00
Bill Somerville
a2ad0be85b
Use shell to execute user_hardware via PATH
2020-07-27 12:19:47 +01:00
Bill Somerville
b4bbc44d5b
Invoke user_hardware correctly
2020-07-27 00:51:12 +01:00
Bill Somerville
5382ef4a33
Merge branch 'develop' into feat-wspr-user-hardware
2020-07-26 18:03:23 +01:00
Bill Somerville
7bb5a8e009
Merge branch 'develop' into feat-psk-reporter-re-work
2020-07-26 15:52:39 +01:00
Bill Somerville
9c22eb321d
Merge branch 'develop' into feat-fst280
2020-07-26 16:20:11 +01:00
Bill Somerville
2f700265b9
Merge branch 'develop' into feat-fst280
2020-07-26 10:20:55 +01:00
Bill Somerville
7566f3548d
Post FST4W spots to WSPRNet.org
...
Includes a re-factoring of the WSPRNet class, particularly to handle
direct spot posts as well as via a file from wsprd. Switched from GET
http request method to POST method.
FST4W spots post the same information a WSPR spots except the drift
field is always zero (FST4W has no drift compensation, so no drift
figure is calculated by the decoder), and the mode field reflects the
T/R period in minutes. This means FST4W-120A will be similar to
WSPR-2, an FST4W-900 will be similar to WSPR-15. I don't see any way
to view the mode field on either the new or old database format
queries on WSPRnet, so it is hard to tell if that field is actually
stored.
2020-07-26 02:58:04 +01:00
Bill Somerville
63b1b0729a
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-26 02:54:04 +01:00
Joe Taylor
ceeafa5bed
*** TEMPORARY *** Add a feature to transmit FT8 and FST4 at the same time.
2020-07-25 16:02:42 -04:00
Bill Somerville
4015c5e538
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-24 21:16:52 +01:00
Joe Taylor
dbaffea0cd
Allow only TR periods >= 120 s for FST4W.
2020-07-24 11:13:48 -04:00
Bill Somerville
90c1824ffe
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-24 16:01:57 +01:00
Joe Taylor
c802c60afa
Allow FST4 to use Split (Rig or Fake it). Set Tx upper freq limit for FST4W to 1600 Hz.
2020-07-24 10:58:10 -04:00
Bill Somerville
29fc0ced19
Revert "Fix double-clicking on a decode line containing fSpread."
...
Change superseded.
This reverts commit d9c2a11821
2020-07-24 12:46:43 +01:00
Bill Somerville
580dd85a18
Remainder of renames to FST4
2020-07-23 18:51:05 +01:00
Joe Taylor
77a6f8f514
Move blanking from symspec() to fst240_decode(). Do not apply RefSpec corrections to data read from disk.
2020-07-23 10:58:10 -04:00
Bill Somerville
51f692d8d4
Avoid double Tx periods in WSPR modes when changing scheduling basis
2020-07-22 18:01:06 +01:00
Joe Taylor
52643b01e2
Correct the "time to decode" and the "Tune" frequency for FST240 modes.
2020-07-21 14:56:20 -04:00
Joe Taylor
05a1b3bae8
Remove "Also FST240W" from the Decode menu and elswhere in the GUI.
2020-07-21 14:18:55 -04:00
Bill Somerville
5111dcdfa8
Include sub-mode in .WAV file meta-data for FST240 modes
2020-07-21 14:57:44 +01:00
Bill Somerville
09996d4d64
Leave decodes titles intact when changing settings in FST240* modes
2020-07-20 19:33:46 +01:00
Joe Taylor
2e916f995c
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-20 13:59:12 -04:00
Bill Somerville
06b9746619
Make fSpread printing compatible with QSOs
2020-07-20 18:27:29 +01:00
Joe Taylor
d9c2a11821
Fix double-clicking on a decode line containing fSpread.
2020-07-20 11:48:09 -04:00
Bill Somerville
731dfc5c6f
Qt 5.15 compatibility
2020-07-19 21:09:52 +01:00
Joe Taylor
6a4f1fbdf7
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-19 13:21:45 -04:00
Joe Taylor
159b8a97f7
Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used.
2020-07-19 13:20:41 -04:00
Bill Somerville
58fc82e178
Correct standard message generation for FST240
2020-07-19 12:31:10 +01:00
Joe Taylor
7fa7b0dda9
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-18 13:57:08 -04:00
Joe Taylor
4fa9557272
Add end-of-Rx-sequence number of buffers for 900 and 1800 s sequences.
2020-07-18 13:56:19 -04:00
Bill Somerville
43d6eacc4b
Refined stop times
2020-07-18 18:52:09 +01:00
Bill Somerville
60ddd40049
More 15 & 30 minute T.R period updates
2020-07-18 18:50:08 +01:00
Bill Somerville
28c5bfc1bd
Process double-clicks of Fox multi-caller replies correctly
...
This change also ignores attempts to double-click other Hound calls.
2020-07-18 14:47:20 +01:00
Bill Somerville
4e0f1103b6
15 and 30 minute T/R periods for FST240 & FST240W
2020-07-17 23:44:14 +01:00
Bill Somerville
cccb38dbef
Pass hints to fst240sim, genfst240, and packjt77::pack77 on WSPR msgs
...
Due to an ambiguity with message encodings between 77-bit QSO modes
and 50-bit beacon modes with message types 13.n3 4.0 and 0.6 a hint
needs to be passed to ensure the right encoding is emitted. The hint
only effects ambiguous messages, others will be encoded strictly
according to the message content.
2020-07-17 19:09:21 +01:00
Joe Taylor
64dc6c6a6e
Move the red goal post appropriately when FST240 or FSt240W mode is selected.
2020-07-17 12:00:15 -04:00
Bill Somerville
74970acdb7
Align FST240W round-robin scheduling with hours
2020-07-16 14:09:24 +01:00
Bill Somerville
785e9e7924
Undo a change only intended to testing
2020-07-15 14:45:08 +01:00
Joe Taylor
79dbdcca9c
Correct a typo.
2020-07-14 14:54:40 -04:00
Joe Taylor
8ff7da3884
FST240W should Tx at audio freq in WSPRfreqSpinBox, not TxFreqSpinBox.
2020-07-14 14:51:40 -04:00
Joe Taylor
c925f6d1cc
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-14 11:43:40 -04:00
Joe Taylor
cbeb81b499
Add LF/MF noise blanker capability for FST240 and FST240W.
2020-07-14 11:27:41 -04:00
Bill Somerville
479dc1113f
Use non-averaging decodes window headings for FST240
2020-07-13 13:27:12 +01:00
Bill Somerville
7118f1ad14
Correct T/R period options for older modes, and correct start times
...
Fix up decode window headings.
2020-07-12 01:38:36 +01:00
Bill Somerville
f77b6bf71a
Only show FST240W T/R period spin box in FST240W mode
2020-07-08 19:37:31 +01:00
Joe Taylor
4de41162a3
Make sure FST240W uses submode A.
2020-07-06 15:36:01 -04:00
Joe Taylor
d4bf73df84
Minor cleanup of RoundRobin control.
2020-07-03 14:17:13 -04:00
Joe Taylor
cbca2f2d80
No band-hopping in FST240W mode.
2020-07-03 10:06:52 -04:00
Joe Taylor
15014685ac
Round-robin control should be visible only in FST240W mode.
2020-07-03 10:05:16 -04:00
Joe Taylor
b9e92c416f
Implement round-robin scheduling for FST240W mode.
2020-07-03 09:48:01 -04:00
Joe Taylor
5637b229a0
Correct the logic for initializing TRperiod everywhere in FST240W mode.
2020-07-02 16:54:16 -04:00
Joe Taylor
9f3bb0fbb7
Show option "Also FST240W" only in FST240 mode.
2020-07-02 16:20:18 -04:00
Joe Taylor
ab2371a96b
Correct the logic for generating "Type 2: messages in FST240W.
2020-07-02 14:57:46 -04:00
Joe Taylor
1a82b9b24d
Change the label for decoded text panel in FST240W mode.
2020-07-02 14:11:35 -04:00
Joe Taylor
8b2b1eb378
FST240W should always set RxFreq=1500 and FTol=100.
2020-07-02 14:03:00 -04:00
Joe Taylor
34055d331a
Send TRperiod to WideGraph when entering FST240 and FST240W modes.
2020-07-02 13:48:35 -04:00
Joe Taylor
352b497399
Remove a diagnostic print.
2020-07-02 13:43:50 -04:00
Joe Taylor
860224e890
Many changes to make FST240W behave in most ways like WSPR. Needs testing!
2020-07-02 09:39:11 -04:00
Joe Taylor
e63b04bb44
Post FSt240W decodes to PSK Reporter.
2020-07-01 15:46:17 -04:00
Joe Taylor
0608521751
Remove unused references to WSPR_LF.
2020-07-01 15:12:14 -04:00
Joe Taylor
eb1c60e454
Remove several more vestiges of WSPR-LF mode.
2020-07-01 13:17:07 -04:00
Joe Taylor
8903041aa9
Fix the startup value of TRperiod for FST240W mode.
2020-07-01 12:10:42 -04:00
Joe Taylor
f2c3cbf9ac
Implement basic functiionality of FST240W in the GUI.
2020-07-01 12:01:47 -04:00
Joe Taylor
ae54c80a54
Here's a start on GUI changes to support FST240W as well as FST240.
2020-06-30 17:14:58 -04:00
Joe Taylor
a44b240192
Change to NSPS=720 for 15-seconf FST240 modes, to allow use for EME.
2020-06-29 17:33:46 -04:00
Joe Taylor
ae6ca148bd
Pass mode name to the Modulator.
2020-06-29 14:47:46 -04:00
Joe Taylor
494481fa8a
Remove a poisonous but unused line of code.
2020-06-28 20:22:24 -04:00
Joe Taylor
7d094b36bf
Fix the "double-click on AP decode" crash.
2020-06-28 23:23:10 +01:00
Joe Taylor
1610375eee
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-06-28 16:27:23 -04:00
Joe Taylor
5b22280631
Fix the "double-click on AP decode" crash.
2020-06-28 16:26:22 -04:00
Bill Somerville
d5c5a58c7f
Merge branch 'develop' into feat-fst280
2020-06-27 22:14:09 +01:00
Joe Taylor
2b85c70bbc
Correct the m_hsymStop values for FST240-300.
2020-06-27 16:58:55 -04:00
Joe Taylor
51447ef1d3
Remove the 1 s offset in wave() array. Fix NSPS for 300 s periods.
2020-06-27 16:24:11 -04:00
Joe Taylor
eb167b11d3
Fix several more GUI parameters for FST240.
2020-06-27 14:13:59 -04:00
Joe Taylor
cd9146e646
Change a few more GUI parameters for the switch from FST280 to FST240. Tx timing probably still needs work.
2020-06-27 13:07:11 -04:00
Steven Franke
390884268c
Wholesale change from FST280 to FST240
2020-06-27 08:53:11 -05:00
Bill Somerville
4ee9ba6dba
Merge branch 'develop' into feat-wspr-user-hardware
2020-06-27 00:40:04 +01:00
phl0
6cbc91b653
Include prop mode in ADIF and UDP messages
2020-06-26 23:45:58 +01:00
Bill Somerville
27b4f2939a
More flexible execution of the user's hardware controller
...
Updated ways to implement a user defined hardware controller which is
executed just after band changes during WSPR band hopping operation.
Allows the user_hardware executable to be located in any directory on
the PATH environment variable. On Windows any file extension listed on
the PATHEXT environment variable may be used, the first match using
PATH and PATHEXT will be executed. On Windows this is achieved by
using CMD.EXE with a '/C' command line flag, i.e. the user's hardware
controller is executed like this:
CMD.EXE /C user_hardware nn
where 'nn' is the new band as an integer in meters.
On non-Windows systems the user's executable will be run if it is
found on the directories specified by the PATH environment variable,
and it is executable, i.e. it is equivalent to something like:
/bin/sh -c user_hardware nn
where 'nn' is the new band as an integer in meters.
In all cases the user_hardware controller should exit with a zero
status, otherwise it have been deemed to have failed. On Windows avoid
an exit status of one as that is utilized by CMD.EXE to indicate the
file was not found, which WSJT-X ignores silently.
This change means the prior need to put the user's hardware controller
into a WSJT-X installation directory like /usr/local/bin or
C:\WSJT\wsjtx\bin is no longer necessary.
2020-06-26 21:35:29 +01:00
Joe Taylor
9caf3b650c
Correct a number of parameters that control FST280 signal duration and timing.
2020-06-25 17:18:48 -04:00
Joe Taylor
1226aacaad
Remove the silly C++ puzzle, no longer needed.
2020-06-24 21:25:02 -04:00
Joe Taylor
b006d8381a
Code for a C++ puzzle.
2020-06-23 14:21:25 -04:00
Joe Taylor
04e326e75a
Change "Enable VHF/UHF/Microwave features" to "Enable VHF and submode features", and remove the popup warning about being on a lower band.
2020-06-22 15:20:41 -04:00
Joe Taylor
1f7d8545f3
Tx line to ALL.TXT should be trimmed().
2020-06-21 13:49:37 -04:00
Joe Taylor
956aa2dfc5
Call switch_mode() to repopulate bandComboBox after switching to FST280.
2020-06-21 11:27:30 -04:00
Joe Taylor
37b1b7aa6f
More of "Single Decode". Also, update m_mode in Wide Graph when switching to FST280.
2020-06-21 10:34:24 -04:00
Bill Somerville
b48b23450d
First iteration of optional TCP/IP client for PSK Reporter
2020-06-21 01:36:30 +01:00
Joe Taylor
f8d7489b4e
Fix many odds & ends for merging FST280 properly into the GUI.
2020-06-20 13:47:32 -04:00
Joe Taylor
87b79d0615
OK, we can now transmit in FST280 mode.
2020-06-19 15:02:05 -04:00
Joe Taylor
acd04cc050
Correctly restore FST280 submode on program restart.
2020-06-19 11:43:34 -04:00
Joe Taylor
a4e32807d9
Correct WSJT-X's display of UTC in FST280 decodes for TR < 60 s.
2020-06-19 09:59:12 -04:00
Joe Taylor
1cebbd2cdd
Enable decoding of FST280 for other T/R sequence lengths. Needs testing!
2020-06-17 19:28:44 -04:00
Joe Taylor
5aeaf5dc78
Include h=8 and NSS=40 in the FST280 decoder.
2020-06-17 14:17:03 -04:00
Joe Taylor
af9f7b21c0
Starting to implement FST280 decoder. Make Rx sequences behave as desired.
2020-06-17 10:56:18 -04:00
Joe Taylor
0e3ff2688a
Further progress toward activating FST280 and FST280W in the GUI.
2020-06-16 16:59:40 -04:00
Joe Taylor
4f802cae84
More work toward implementing GUI features for FST280 and FST280W.
2020-06-16 15:56:15 -04:00
Joe Taylor
725933ddca
Initial commit with some GUI features for FST280 and FS280W.
2020-06-16 14:58:08 -04:00
Bill Somerville
9c22b5c3ed
Qt v5.15 compatibility
2020-06-13 16:04:41 +01:00
Joe Taylor
3ad2a4c277
Remove a no-longer-used parameter from calls to lookup().
2020-06-07 13:32:18 -04:00
Joe Taylor
2973c8dad8
Remove the popup message that "<callsign> was not found in CALL3.TXT".
2020-06-07 13:27:49 -04:00
Joe Taylor
bcfa4526d2
Clear DX Grid after any change in DX Call. (Is this the best way to do it?)
2020-06-07 13:02:27 -04:00
Joe Taylor
f9780927ab
Merge branch 'hotfix-2.2.1' of bitbucket.org:k1jt/wsjtx into hotfix-2.2.1
2020-06-04 11:45:23 -04:00
Joe Taylor
05cd8b3462
Improved logic for the way "Lookup" is processed.
2020-06-04 11:32:19 -04:00
Bill Somerville
8833b56d91
Fix issue with 2D spectrum selection in translated UIs
...
For completeness this fixes the other occurrence of widget signals
with text arguments that are liable to misbehaviour with translated
UIs.
2020-06-03 17:43:27 +01:00
Bill Somerville
37bf0f7356
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0
2020-06-01 16:49:36 +01:00
Bill Somerville
4e9d3e1076
Remove RC expiration and nag message
2020-06-01 16:48:50 +01:00
Joe Taylor
e97164719d
Zero the "nDecodes" label if there were no decodes in a sequence.
2020-06-01 11:48:35 -04:00
K9AN
aa4d98b6f1
Fix MSK144 timestamps in ALL.TXT log.
2020-06-01 14:58:44 +01:00
Bill Somerville
2088ad8597
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0
2020-05-26 19:57:43 +01:00
Bill Somerville
65ef7c47f7
Repair regression defect in WSPR power combo box items
2020-05-26 18:00:14 +01:00
Joe Taylor
eeed9b5a2e
Don't allow restart with "ISCAT B" mode label unless VHF features are enabled.
2020-05-26 10:28:14 -04:00
Joe Taylor
c7ac74b2dc
Correct the restoration of WideGraph, EchoGraph, nd FastGraph after minimization.
2020-05-25 09:35:31 -04:00
Joe Taylor
628eab2cb6
Don't clear the Hold Tx frequency box at unwanted times.
2020-05-23 10:56:17 -04:00
Joe Taylor
8a572eb4a2
Add a mode label color for FT4, and fix a typo. Thanks to Yukio, JG1APX!
2020-05-23 09:05:01 -04:00
Joe Taylor
f62cdb4f37
Fix crash after the message "Double clicking is not supported in ISCAT mode".
2020-05-22 11:56:00 -04:00
Joe Taylor
bcdc12d210
Allow FT4 to use NA VHF Contest messages.
2020-05-21 12:05:51 -04:00
Bill Somerville
e43cb59bd0
More translatable strings in the UI
2020-05-19 12:28:58 +01:00
Bill Somerville
84f153517a
Made more strings translatable
2020-05-19 12:26:51 +01:00
Joe Taylor
e6b6a3ab5b
Bug fix for compound callsigns used with EU VHF Contest messages.
2020-05-13 11:54:25 -04:00
Bill Somerville
ce15159aaa
Fix an offset issue with the WSPR Tx power drop down list
2020-05-13 04:06:40 +01:00
Bill Somerville
4de6f73f1b
Restore start decodes behaviour at top for FT8 segmented decoding
2020-05-12 01:39:46 +01:00
Joe Taylor
7e3115e3d1
I believe these changes fix the "missing blank line" bug. Please watch for a counter-example!
2020-05-11 20:13:51 +01:00
Joe Taylor
bc8173a395
Don't allow reading a .wav file while decoder is busy.
2020-05-07 14:35:46 -04:00
Bill Somerville
1403c186d2
Updates for Qt v5.14 compaibility
2020-05-07 02:56:57 +01:00
Bill Somerville
8c4af5dba7
Update version string in RC time out warning
2020-05-04 14:05:20 +01:00
Joe Taylor
0e29df1145
Enable the "RC" warning message for v2.2.0-rc1.
2020-05-03 13:56:25 -04:00
Joe Taylor
67e4c8855a
Warning message: "Fox-and-Hound operation is available only in FT8 mode".
2020-05-03 11:46:56 -04:00
Joe Taylor
292d6454c3
Warning msg: "EU VHF Contest messages require a 6-character locator."
2020-05-03 11:23:38 -04:00
Joe Taylor
aa2c965b85
Don't display Fox or Hound on labDX in FT4 mode. Fox/Hound is only available in FT8 mode.
2020-05-02 11:54:20 -04:00
Joe Taylor
38db927673
Fix another bug: I believe all contest modes autosequence properly now.
2020-05-01 16:39:40 -04:00
Joe Taylor
f3e0eed06b
Correct bug in RTTY RU autosequencing introduced with the new EU VHF Contest message format.
2020-05-01 13:33:27 -04:00
Joe Taylor
9709b19585
Better format for warning message.
2020-04-30 15:05:28 -04:00
Joe Taylor
a81c9acdce
Offer instruction in the "Should you switch to EU VHF Contest?" messagebox.
2020-04-30 14:44:51 -04:00
Joe Taylor
f4c0e7803b
Don't crash after double-click on a EU_VHF message with <...>.
2020-04-25 16:28:05 -04:00
Joe Taylor
47a3f9c736
Don't allow hijacking of EU VHF Contest QSOs. (Why is this change necessary?)
2020-04-25 12:11:20 -04:00
Joe Taylor
ee04d864cf
Correct for "deCallAndGrid" not working for EU VHF contest messages.
2020-04-24 10:33:23 -04:00
Joe Taylor
d657da5980
Don't switch automatically to EU VHF Contest mode.
2020-04-23 16:15:19 -04:00
Joe Taylor
7b444b855b
Fix an index value. Better approach: fix parsing in decodedtext.cpp.
2020-04-22 14:45:43 -04:00
Bill Somerville
e51bfc8397
Fix a QStringList bounds error in auto-sequencing
2020-04-22 18:32:00 +01:00
Joe Taylor
185901e518
Auto-sequences QSOs with EU VHF Contest messages now work OK.
2020-04-22 13:08:45 -04:00
Joe Taylor
47f47a313f
Fix a lonstanding bug that causes crash when logging incomplete EU VHF Contest data.
2020-04-22 11:51:30 -04:00
Joe Taylor
428bb96ce8
Temporary commit to help in finding a bug.
2020-04-22 11:34:06 -04:00
Joe Taylor
8253f359bc
First cut at auto-sequencing for the new-style EU VHF Contest messages.
2020-04-21 15:50:27 -04:00
Bill Somerville
f286a24710
Ensure that break lines are printed when decoder is aborted
...
This change also moves some other decode finished logic into
MainWindow::decodeDone().
2020-04-18 00:22:07 +01:00
Joe Taylor
75f0e40e8a
Make "Hold Tx Freq" invisible in JT4, QRA64, and JT65/VHF.
2020-04-17 16:10:47 -04:00
Joe Taylor
35eb391e23
Clean up the formation and display of JT4 average and DS decodes.
2020-04-17 12:14:43 -04:00
Joe Taylor
800ed045b6
Remove some obsolete, commented-out code.
2020-04-15 13:41:45 -04:00
Joe Taylor
dc71fd70d5
Stated WSPR power levels below 0 dBm are not allowed. Remove them from TxPowerComboBox.
2020-04-14 12:12:53 -04:00
Joe Taylor
b6e2fa82c0
Update copyright notice to 2020.
2020-04-10 11:19:42 -04:00
Joe Taylor
c188f8ee89
More cleanup of the display of special JT65 decoding modes: avg, deep, AP.
2020-04-09 13:56:35 -04:00
Joe Taylor
0390791090
Fix some problems with message averaging, etc., in JT65 with VHF features enabled. Needs further testing!
2020-04-08 16:56:28 -04:00
Joe Taylor
9d2b2b1a56
Maintain visibility of AvgMsg window when it has been activated.
2020-04-08 10:56:11 -04:00
Joe Taylor
d69da851c1
Fix the 'OO O' display problem for some JT65 decodes.
2020-04-07 18:26:30 -04:00
Joe Taylor
c46ec025e0
For "D4C/B HK76": Make FT8 beacon transmissions only at top of a UTC minute.
2020-04-07 09:39:48 -04:00
Steven Franke
3f7b06853e
Make wspr work again.
2020-03-21 14:44:17 -05:00
Joe Taylor
a39470cb6f
FT4 should always use RR73 in Tx4.
2020-03-20 09:32:02 -04:00
Joe Taylor
fe33bcdd6c
More cleanup after making "Save None" mean NO SAVING AT ALL.
2020-03-19 15:41:18 -04:00
Joe Taylor
7de6b8c98d
Remove diagnostic writes. Don't save .wav files if "Save None" is selected.
2020-03-19 14:46:41 -04:00
Joe Taylor
d4d37c49ab
Silence compiler warnings.
2020-03-19 12:04:56 -04:00
Joe Taylor
7564301209
Silence compiler warnings.
2020-03-19 11:43:22 -04:00
Joe Taylor
aff8229fef
For non-FT8 modes, reset m_nDecodes to 0 after receiving <DecodeFinished>.
2020-03-17 14:39:15 -04:00
Joe Taylor
2653626d45
Replace the changes I removed by executing 'git reset HEAD~'.
2020-03-16 10:27:22 -04:00
Joe Taylor
3962aa3c43
Replace hijacked ss(1:3,1) with a separate ipc(3) array.
2020-03-15 14:25:56 -04:00
Bill Somerville
46638f6f07
Add shared memory synchronization to make access safe
2020-03-15 00:25:35 +00:00
Joe Taylor
649a79dfc1
New IPC trial: use shmem instead of .start .stop .quit files.
2020-03-14 17:06:54 -04:00
Bill Somerville
523e9a1a07
Enhanced process control for jt9 executable
...
The wsjtx process creates control files .start, .stop, or .quit and
the jt9 process deletes them. This is intended to avoid any race
conditions that get the processes out of sync.
2020-03-14 00:01:54 +00:00
Joe Taylor
ebf4952c7c
Auto-clear of hung decoder status.
2020-03-13 14:25:12 -04:00
Joe Taylor
8151816c84
Change formats of diagnostic writes so that GUI and Fortran output can be sorted together.
2020-03-13 11:25:22 -04:00
Joe Taylor
fedb72a38c
Set m_nDecodes=0 only after the 50-buffer decode pass.
2020-03-12 16:52:19 -04:00
Joe Taylor
afe0262ec9
Previous commit message should have mentioned number of decodes is now displayed on status bar.
2020-03-12 15:11:20 -04:00
Joe Taylor
8e7685ea36
Do not alolow bailouts when data were read from disk.
2020-03-12 15:07:56 -04:00
Joe Taylor
6e308f0018
More attempts to diagnose or fix the FT8 "hung decoder" issue.
...
On the Fortran side:
- For the nzhsym=41 activation, bail out if m_ihsym reaches 45
- For the nzhsym=47 activation, bail out if m_ihsym reaches 48
- Change the format and content of what's written to fort.71
- Change msdelay from 10 to 1
In mainwindow.cpp:
- change format and content of what's written to qDebug
- always start FT8 decoder at m_ihsym = 41, 47, and 50
2020-03-12 12:33:34 -04:00
Bill Somerville
6a7263dc94
Add escape route from retries of IPC errors
2020-03-11 22:38:41 +00:00
Bill Somerville
c58a690bf1
Add error checking to jt9 process control by .lock/.quit files
2020-03-11 22:26:41 +00:00
Joe Taylor
4d9c9e08e2
If 47-buffer call takes too long, start the 50-buffer call late.
2020-03-11 16:03:51 -04:00
Joe Taylor
d69cb49e9a
Diagnostic writes to fort.71 in jt9a.f90.
2020-03-11 14:02:19 -04:00
Joe Taylor
199ff3dd3d
Experimental work-around for FT8 decoding on slow computers. Important changes:
...
- don't start function decode() is decoder is already busy
- send updated m_ihsym to jt9[.exe] via ss(1,1). Bill won't like this!
- jt9 bails out of the 41-buffer pass at m_ihsym=45.
2020-03-10 16:26:42 -04:00
Joe Taylor
592f4eea71
Remove a qDebug() call.
2020-03-09 15:29:57 -04:00
Steven Franke
f2266c3c54
1. subtractft8: on the last call to sqf, don't need to do the long FFT.
...
2. mainwindow.cpp: based on the time when <DecodeFinished> is received, calculate
mswait to try to place the killFile time at 0.75*m_TRperiod.
2020-03-06 11:06:44 -06:00
Joe Taylor
431ec50212
Progress toward decoding at 41/47/50 buffers. Not yet complete!
2020-03-05 15:37:31 -05:00
Steven Franke
6773768586
Clean up the timestamp adjustment logic, and make the threshold 0.5*TRperiod.
2020-03-05 11:25:49 -06:00
Steven Franke
07c753e284
Make ALL.TXT Rx timestamp equal to the beginning of the TR period, even if the decode comes in after the start of the next TR period. Make Tx timestamp the actual time that Tx started.
2020-03-05 11:16:56 -06:00
Joe Taylor
b9888a09ff
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-26 13:16:12 -05:00
Joe Taylor
6afff5821e
Correct the times written to ALL.TXT when decode occurs after the T/R boundary.
2020-02-26 13:15:22 -05:00
Steven Franke
0ca6cbb575
wsprd: improve decoding and reduce the number of false decodes
...
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
2020-02-25 10:48:38 -06:00
Joe Taylor
4a4864d2ae
FT8 early decoding is now working.
2020-02-13 15:05:37 -05:00
Steven Franke
70b84478f0
Add WW_DIGI to the special activities section. Make necessary changes to
...
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
2020-01-24 11:26:36 -06:00
Steven Franke
a63e6e1209
- Force the use of standardized CQ modifier for FT4/FT8 contest operation.
...
- Pass CQ modifier string to the ft4 decoder.
2020-01-08 08:41:47 -06:00
Bill Somerville
5a23edbbae
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2019-12-08 18:42:06 +00:00
Bill Somerville
485f787cef
Increase maximum SNR filter value in Fox mode to 70dB
...
This change abandons the previous settings file key for this control
so that all users pick up the new default of 70dB.
2019-12-08 18:39:37 +00:00
Joe Taylor
7540d2137a
For accessibility: Alt+R sets Tx4 message to RR73, Ctrl+R to RRR.
2019-12-05 11:27:17 -05:00
Bill Somerville
fb1b2e7687
Tagging the WSJT-X v2.1.1 release
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a8/QACgkQ2GSwbR6B
YY8y+ggAqwaaCRMCSwDzStooYjStJErVoZ/yB//MmoF+798TBb+3MkiT+KclW7aN
rxTOmEJ+a84PmsiW6Qz/AAcHPnbKDhtwWASZooopgNYDfgyaUib3HfIa+cFJO6my
OUzlTsH94yDxeBCWOtf1dLiP0YwJKfp/vxzbfDAWXTd4dx3Ok/7KwghYocmP3eCq
ruZ+dWojQzwE+h50P6B9gTFxGWMHUDDNeZ/c8u494wqDQvQaRoM9oOnQWzlGiMis
JaerraI52JEdFLnXjtLYeyXtfg+zA0KvRY2DWy1aCPpGkNjy3DPNlOA+cDQpzBru
NIqsUF+GplgkVs3sKNLXq36ZgaBQBg==
=5w4B
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a9R8ACgkQ2GSwbR6B
YY9SWQf+JdfIvlHy8ExSs9ImCLck/e66V2OAqaEONQX1bEC4QiG3M/rVJGgf2iFz
ZFshtilsajlpsYZQIFToTmJmI76eGLAmyNIcZN2WpcJQMNWZnxqklMj2wIHbRh+g
Pvw3FC+lc4LUjZCCMYrVjNXxsRmQtjqV1lVFBnmrAWCdrgHmhyrVbPZT4B+fRTXL
ikw/BiRgxhI0aoIWKzNrtztMYUBjanKLTHE81AVgsgZkBDNybOjR7mE2E/Jwc4Qx
mVu+Z0uI+bVuBlMOrqp0K+rrUz7qMZe5/AMSRbgzwfueEOIShgu2wrfV++3JDXLH
AhtIAcL/b39RBx0jkFE8rBKaZpkoAw==
=DNp6
-----END PGP SIGNATURE-----
Merge tag 'wsjtx-2.1.1' into develop
Tagging the WSJT-X v2.1.1 release
2019-11-24 21:24:39 +00:00
Joe Taylor
849e8c7c55
When using EU VHF Contest messages, update the received exchange m_xRcvd only if decoded messages is addressed to me.
2019-11-18 14:00:42 -05:00
Bill Somerville
58c901240b
Use call, mode, and frequency from Log QSO for worked before records
...
The current frequency, mode and, call were incorrectly being used to
create a new worked before record from a logged QSO. This meant that
band changes etc. made before clicking "Ok" to log a QSO would be
erroneously attributed to the worked before records.
2019-09-17 21:04:34 +01:00
Bill Somerville
a3efe8117c
Qualify regeneration of GFSK message regeneration to only when Txing
2019-09-07 21:23:39 +01:00
Bill Somerville
137bc1ccab
Tx waveform regeneration for GFSK modes Tx audio offset change
2019-08-15 15:20:45 +01:00
Bill Somerville
cefadfeaa3
Disable auto Tx before logging dialog shown even if disable Tx on 73 is not set
2019-08-13 00:20:40 +01:00
Joe Taylor
79b805b0e7
The start of some code for computing QSO points in WWROF/SCC digi-contest.
2019-08-08 09:55:08 -04:00
Joe Taylor
f265fa83f5
Disable the "not GA" warning message.
2019-07-18 15:30:33 -04:00
