Better AFC (wider range of possible drifts; more accurate DT alignment).
Better definition of metric tables used by Fano decoder.
Zero-centeres soft symbols, instead of offset +128.
Tuned several empirical parameters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5004 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Option to control standard message generation for type 2 compound
callsign holders.
Process decoded messages based on either base or full callsign for
both DE and DX callsigns.
Change CW id when callsign changed in settings.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5000 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
limits on sync and schk. (Probably still more to come...)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4998 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Because setting frequency can change mode and setting mode can change
frequency on various rigs it is necessary to set a frequency by first
setting a frequency which gets to the correct band and potentially
band stack register. Then to set the mode to ensure that any band
remembered mode is cleared. Then set frequency again in case the prior
mode change moved the frequency (e.g. CW correction). Then set mode
again because some rigs set the mode according to frequency.
Who would have thought setting the rig frequency via CAT could be so
complicated :( TODO: Even this is flawed on some Yaesu rigs that must
be band changed to select some settings like aerial socket and pre-amp
settings.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4997 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The above member opens the port and that twiddles DTR/RTS which is
unhelpful if they are connected to PTT. Instead a primitive port name
filter to try and detect unuseable ends of serial port pairs is
employed. This may need further tests to exclude similar devices yet
to be discovered.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Short cut keys implemented via a special key press event handler do
not fully integrate with the UI and standard UI implementation
guidelines, also they introduce an alternative code path that can
diverge from the intended behaviour.
Short cuts to set the next Tx message have been added as
Ctrl+<number>. Alt+<number> short cuts now do as the help implies
i.e. change the current Tx message even if there is another message
being transmitted.
The log QSO window should only be triggered by a 73 Tx message when
transmitting.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Subversion keyword expansion of $Rev:$ in a file is hopeless as it is
impossible to coordinate with a release. Revert to an empty string
when it can't be discovered with svn info etc..
Further changes to the way verion and revision numbers are generated
Local builds from source tar balls or the two phase wsjtx-superbuild
no longer specify any revision, just the version number. Since these
sort of builds are expected to be release candidates or release
versions the revision (svn changeset number) is implicit from the svn
tag of the version.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4986 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
decoded.txt was not being deleted after a full activity window erase.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4982 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Except on Windows where the obscure \\.\ device root is removed
because Windows users will not be used to it.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4978 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some Hamlib back ends clain to support split queries but they don't
work. The existing code to only try a split query once per session if
it fails has been extended to any error from Hamlib returned from a
split query.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4972 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
To keep the decoded text lines to a minimum length suitable for screen
display some obvious abbreviations have been applied. Also as the
lines may now extend to the right with a horizontal scroll bar
appearing when necessary the country names are not truncated any more.
Users still have the option to provide their own tailored cty.dat file
if they wish.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4970 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Mac builds require that Qt be built from sources since the binary Qt
package is built against the clang libstdc++ C++ support library and
we need it built against the more modern libc++ C++ support library.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4963 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The temporary development version of jt9 called jt9_omp is now the
default jt9. This means that parallel decoding of JT65 and JT9 is the
default on platforms that support OpenMP.
If parallel decoding is not required or desired, it can be constrained
by setting the environment variable OMP_THREAD_LIMIT=1. In dual mode
operating this will deliver all decodes of the current mode before any
decodes of the other with the potential impact of taking up to twice
as long to finish decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4960 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The change to use QTextEdit in read only mode cause the cursor to
become an I-beam type, this changes it to the arrow pointer type that
the previous QTextBrowser used by default.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4959 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Colours behave like other configuration items and changes are only
applied when the Settings UI is dismissed via the "OK" button.
Simplified font settings and use style sheets consistently to set the
application and decoded text fonts. This is necessary because any UI
widget that has a style sheet applied does not honor a font set by
QWidget::setFont() even if there is no font setting in the style
sheet, this is broken behaviour IMHO but that is the way Qt currently
works.
Use a style sheet to style the frequency display and clock. This is
necessary to allow fonts to be cascaded through parent style sheets
and still be overridden on these widgets.
Simplify the decoded text widgets, there is no need to use the
QTextBrowser as a super class since the simpler QTextEdit set as
read-only is sufficient. Also removed colour setting via a background
brush as it doesn't work and the HTML 'bgcolor' attribute works
correctly.
Change to UI properties of the decoded text widgets to allow
horizontal scrolling if required, this allows larger fonts to be used
without truncating decoded messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Description and instructions to help those adding or amending settings
values.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4952 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
procedure; better window functions for some FFTs, resulting in
better decoder performance; User-selectable colors for backgrounds
of decoded messages. NB: more testing is desirable!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4951 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Options have been added to control frequency cut off values, mode and, Tx mode.
The comand line parser now has optional long option names and usage help.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4949 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Outputo buffer flush commands have been added after each decoded message output
to ensure that other processes get timely updates of newly decoded messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4948 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The native Mac C/C++ compilers (Clang) do not support OpenMP so CMake by
default disables OpenMP for the project since it requires all project compilers
to support it. This means that we have to hack the build script on Mac to
compile the Fortran sources with OpenMP turned on and manually link in the
required OpenMP run time support to the executables.
This hack presumes that the Fortran compiler on Mac is gfortran.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4947 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This requires setting newdat=0 after the big FFT is computed. In the OMP
code this must be done separately for each mode; so new variables newdat9
and newdat65 have been defined. Both are set to "newdat", the value
forwarded from the GUI, each time jt9[_omp][.exe] goes into action.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4946 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
