------------------------------------------------------------------------
r7861 | k9an | 2017-07-12 22:49:39 +0100 (Wed, 12 Jul 2017) | 1 line
Use quarter-symbol steps for time sync. Lower sync threshold. Implement subtraction and two pass decoding. Use osd2 only near nfqso.
------------------------------------------------------------------------
r7862 | k9an | 2017-07-13 01:28:57 +0100 (Thu, 13 Jul 2017) | 1 line
Fix NHSYM.
------------------------------------------------------------------------
r7863 | k9an | 2017-07-13 01:31:52 +0100 (Thu, 13 Jul 2017) | 1 line
Fix a comment. No code changes.
------------------------------------------------------------------------
r7864 | k9an | 2017-07-13 01:43:56 +0100 (Thu, 13 Jul 2017) | 1 line
Fix another bounds error.
------------------------------------------------------------------------
r7879 | k1jt | 2017-07-14 17:02:01 +0100 (Fri, 14 Jul 2017) | 1 line
Code cleanup and test ofFT8 decodes with erasures. Do not use on the air.
------------------------------------------------------------------------
r7881 | k1jt | 2017-07-14 19:19:48 +0100 (Fri, 14 Jul 2017) | 1 line
Fix nutc in jt9; alternative sync value for late-start FT8 signals.
------------------------------------------------------------------------
r7882 | k9an | 2017-07-14 20:22:53 +0100 (Fri, 14 Jul 2017) | 1 line
Move ft8apset to a separate file.
------------------------------------------------------------------------
r7884 | k9an | 2017-07-14 20:35:22 +0100 (Fri, 14 Jul 2017) | 1 line
Add ft8apset.f90.
------------------------------------------------------------------------
r7885 | k9an | 2017-07-14 20:46:04 +0100 (Fri, 14 Jul 2017) | 1 line
Update call to ft8b.
------------------------------------------------------------------------
r7886 | k9an | 2017-07-14 21:12:29 +0100 (Fri, 14 Jul 2017) | 1 line
More work on ap.
------------------------------------------------------------------------
r7887 | k9an | 2017-07-14 23:09:50 +0100 (Fri, 14 Jul 2017) | 1 line
More work on AP. Deep decode is unstable - not for use on the air.
------------------------------------------------------------------------
r7890 | k9an | 2017-07-15 01:33:25 +0100 (Sat, 15 Jul 2017) | 1 line
Turn off ap.
------------------------------------------------------------------------
r7891 | k9an | 2017-07-15 02:49:44 +0100 (Sat, 15 Jul 2017) | 1 line
Add some more items to the lun 81 diagnostics.
------------------------------------------------------------------------
r7892 | k9an | 2017-07-15 15:21:18 +0100 (Sat, 15 Jul 2017) | 1 line
Properly calculate metrics for non-ap bits that reside in symbols that contain ap bits.
------------------------------------------------------------------------
r7893 | k9an | 2017-07-15 16:43:41 +0100 (Sat, 15 Jul 2017) | 1 line
Use overlap and add to apply reference filter/amplitude equalization.
------------------------------------------------------------------------
r7894 | k9an | 2017-07-15 16:46:46 +0100 (Sat, 15 Jul 2017) | 1 line
Improve a comment.
------------------------------------------------------------------------
r7895 | k9an | 2017-07-16 01:10:37 +0100 (Sun, 16 Jul 2017) | 1 line
Make refspec filter causal for overlap and add.
------------------------------------------------------------------------
r7911 | k9an | 2017-07-16 16:56:06 +0100 (Sun, 16 Jul 2017) | 1 line
More work on Deep decoding.
------------------------------------------------------------------------
r7917 | k9an | 2017-07-16 18:08:09 +0100 (Sun, 16 Jul 2017) | 1 line
Properly round the printed snr.
------------------------------------------------------------------------
r7925 | k9an | 2017-07-18 02:12:11 +0100 (Tue, 18 Jul 2017) | 1 line
Work on ap decoding. Diagnostic write enabled.
------------------------------------------------------------------------
r7926 | k9an | 2017-07-18 16:22:20 +0100 (Tue, 18 Jul 2017) | 1 line
Fix a bug in AP decoding when iaptype=2. Decrease time-sync search range to +/- 1.5s. Fix a big with erasure decoding.
------------------------------------------------------------------------
r7927 | k1jt | 2017-07-20 00:23:20 +0100 (Thu, 20 Jul 2017) | 1 line
Remove slider next to audio level meter.
------------------------------------------------------------------------
r7928 | k1jt | 2017-07-20 16:15:00 +0100 (Thu, 20 Jul 2017) | 6 lines
1. Alt+F8 arms "Call 1st" as if a CQ had been sent.
2. "Call 1st" label turns red when armed to respond to a caller.
3. Suppress some recognizable false decodes, send them to cumulative file
"data_dir/false_decodes.txt".
4. Reduce sleep delay in decoder() to 10 ms.
------------------------------------------------------------------------
r7929 | k1jt | 2017-07-20 20:23:17 +0100 (Thu, 20 Jul 2017) | 1 line
Fix wording in list of keyboard shortcuts.
------------------------------------------------------------------------
r7930 | k1jt | 2017-07-20 20:25:08 +0100 (Thu, 20 Jul 2017) | 2 lines
Comment out diagnostic write.
------------------------------------------------------------------------
r7931 | k9an | 2017-07-20 22:08:36 +0100 (Thu, 20 Jul 2017) | 1 line
Only print dupes if SNR is higher than what has already been printed.
------------------------------------------------------------------------
r7932 | k9an | 2017-07-21 23:02:06 +0100 (Fri, 21 Jul 2017) | 1 line
Add to the list of allowed keywords in jtmsg.f90.
------------------------------------------------------------------------
r7933 | k9an | 2017-07-22 04:01:09 +0100 (Sat, 22 Jul 2017) | 1 line
Add variables lapon and napwid to control ap decoding. Reconfigure the logic for AP decoding and ordered-statistics decoding.
------------------------------------------------------------------------
r7934 | k9an | 2017-07-22 14:21:03 +0100 (Sat, 22 Jul 2017) | 1 line
Prevent a certain type of non-standard message from being flagged as a false decode.
------------------------------------------------------------------------
r7935 | k9an | 2017-07-22 18:12:48 +0100 (Sat, 22 Jul 2017) | 1 line
More informative end-of-line annotation for AP decodes.
------------------------------------------------------------------------
r7936 | k9an | 2017-07-24 15:23:22 +0100 (Mon, 24 Jul 2017) | 1 line
Bring msk144d2 more up to date. Runs now, but still needs more work.
------------------------------------------------------------------------
r7937 | k1jt | 2017-07-24 15:48:16 +0100 (Mon, 24 Jul 2017) | 2 lines
Correct the spacing between marked lowest and highest FT8 tones for RxFreq (green) and TxFreq (red).
------------------------------------------------------------------------
r7938 | bsomervi | 2017-07-24 20:27:14 +0100 (Mon, 24 Jul 2017) | 4 lines
Add double clickable push button and radio button widgets
These emit doubleClicked signal when double-clicked, otherwise they
are identical to their super-classes.
------------------------------------------------------------------------
r7939 | bsomervi | 2017-07-24 20:27:23 +0100 (Mon, 24 Jul 2017) | 42 lines
Add the option to ALT+click a decoded CQ or QRZ message which only
moves the Rx frequency to theirs, this facilitates calling a station
who is busy and may have many callers on their frequency. Updated the
corresponding mouse shortcuts help text.
Allow for times with seconds when parsing fast mode and FT8 decodes.
Exclude the RR73 grid square from and grid validation or matching, it
is not a grid square any more as far as WSJT-X is concerned, it is an
RRR substitute.
Add a simple state machine for QSO progress such that replies and
auto-sequencing can be better controlled.
Get compound callsign edge cases working again and allow QSOs from and
to compound callsign holders working in as many situations as possible
including auto-sequencing and FT8 auto-reply mode. This does mean
that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx
frequency will be taken as a reply to a CQ call despite it not being
explicitly addressed back to the CQ caller. Compound callsigns should
work in MSK144 contest mode also as well as in short code modes with
some minor restrictions (short codes will not be used where
configuration demands that a message be used to send a full compound
callsign).
Auto sequencing has been made generic such that it can be used for
more than one mode if desired.
Allow the use of free text messages to sign off in auto sequenced QSOs
without the message being overwritten by the sequencer. Double click
actions have been added to the Tx5 radio and push buttons to revert
back to the default standard 73 message.
Make DisplayText class interface more idiomatic C++ and simplify a
bit.
Fixed some displayed widget arrangements for different modes and
sub-modes so that they are consistent when starting up and when
switching mode or sub-mode.
This is a big change which has been extensively tested but no doubt
there will also be some new defects introduced.
------------------------------------------------------------------------
r7940 | bsomervi | 2017-07-25 17:51:19 +0100 (Tue, 25 Jul 2017) | 1 line
Fix issue with Tx5 not being generated with a new DX Call
------------------------------------------------------------------------
r7941 | bsomervi | 2017-07-25 17:51:27 +0100 (Tue, 25 Jul 2017) | 1 line
Fix country name display that broke in r7939
------------------------------------------------------------------------
r7942 | bsomervi | 2017-07-25 17:51:34 +0100 (Tue, 25 Jul 2017) | 1 line
Ensure JT9 lowest decode frequency spin box is disabled when not available
------------------------------------------------------------------------
r7943 | bsomervi | 2017-07-25 17:51:42 +0100 (Tue, 25 Jul 2017) | 4 lines
Pick up tail-enders when completing a call 1st QSO after re-enabling auto Tx
Allow any message to start a QSO so long as we are not in an
auto-reply QSO.
------------------------------------------------------------------------
r7944 | bsomervi | 2017-07-25 17:51:49 +0100 (Tue, 25 Jul 2017) | 1 line
Exclude all decode quality markers from internal decode parsing and matching
------------------------------------------------------------------------
r7945 | k9an | 2017-07-25 20:06:05 +0100 (Tue, 25 Jul 2017) | 1 line
Move '?' quality warning to message(22:22).
------------------------------------------------------------------------
r7946 | k9an | 2017-07-25 21:55:13 +0100 (Tue, 25 Jul 2017) | 1 line
Reject candiates with fewer than 7 correct hard-decoded sync symbols.
------------------------------------------------------------------------
r7947 | bsomervi | 2017-07-26 02:38:37 +0100 (Wed, 26 Jul 2017) | 1 line
Force Settings tab to Radio tab when navigating there from a rig error message
------------------------------------------------------------------------
r7948 | bsomervi | 2017-07-26 02:38:44 +0100 (Wed, 26 Jul 2017) | 1 line
Correct the highlighting of the Call 1st check box label
------------------------------------------------------------------------
r7949 | bsomervi | 2017-07-26 02:38:57 +0100 (Wed, 26 Jul 2017) | 5 lines
Option to skip using grid reply message
Enable and disable by double-clicking the Tx1 button or the adjacent
radio button. Tx1 message shows grayed out when the Tx1 message is
elided.
------------------------------------------------------------------------
r7950 | bsomervi | 2017-07-26 02:39:04 +0100 (Wed, 26 Jul 2017) | 6 lines
Option to use RR73 grid message as RRR message substitutes
Enable or disable by double-clicking the Tx4 button or the adjacent
radio button. Is auto disabled by a band change as it is expected that
the user reassess the conditions to see if message repetitions are
unlikely to be needed.
------------------------------------------------------------------------
r7951 | bsomervi | 2017-07-26 02:39:11 +0100 (Wed, 26 Jul 2017) | 1 line
Fix highlighting of the call first check box label
------------------------------------------------------------------------
r7952 | bsomervi | 2017-07-26 02:39:23 +0100 (Wed, 26 Jul 2017) | 1 line
Better behavior and tool tips for Txn buttons and radio buttons
------------------------------------------------------------------------
r7953 | bsomervi | 2017-07-26 02:39:30 +0100 (Wed, 26 Jul 2017) | 1 line
Auto Tx stop when calling a CQer who answers another station on your Tx frequency
------------------------------------------------------------------------
r7954 | bsomervi | 2017-07-26 11:56:12 +0100 (Wed, 26 Jul 2017) | 1 line
Add menu option to turn on AP decoding in FT8 mode
------------------------------------------------------------------------
r7955 | k9an | 2017-07-26 14:05:34 +0100 (Wed, 26 Jul 2017) | 1 line
Enable AP for any decoding level.
------------------------------------------------------------------------
r7956 | k1jt | 2017-07-26 14:44:31 +0100 (Wed, 26 Jul 2017) | 1 line
Remove obsolete test program.
------------------------------------------------------------------------
r7957 | bsomervi | 2017-07-26 22:18:59 +0100 (Wed, 26 Jul 2017) | 11 lines
Use the low confidence decode quality marker to elide spots and pass info via UDP
The UDP decode and reply message have been augmented with a boolean
flag denoting a low confidence decode when set. Existing clients can
safely use the reply message without passing the flag as the default
value will still action messages that have high confidence. If low
confidence decodes are to be passed back via the reply message then
the low confidence flag must be included and correctly set to match
the original decode.
See NetworkMessage.hpp for message fields and meanings.
------------------------------------------------------------------------
r7958 | bsomervi | 2017-07-26 22:19:21 +0100 (Wed, 26 Jul 2017) | 3 lines
Add QSO state machine state and tx audio offset to parameters passed to slow decoders
Required to pick best AP masks in FT8 decoder
------------------------------------------------------------------------
r7959 | bsomervi | 2017-07-26 23:03:02 +0100 (Wed, 26 Jul 2017) | 1 line
Extend grids looked up from CALL3.TXT from 4 to 6-digits if first 4 match
------------------------------------------------------------------------
r7960 | k9an | 2017-07-27 16:35:40 +0100 (Thu, 27 Jul 2017) | 1 line
nQSOProgress now controls AP decoding. Needs testing - may not be stable with AP enabled.
------------------------------------------------------------------------
r7961 | k9an | 2017-07-27 19:07:54 +0100 (Thu, 27 Jul 2017) | 1 line
Correct some logic so that AP is only on when selected and so that AP decodes of type 4 or greater are limited to the vicinity of nfqso or nftx.
------------------------------------------------------------------------
r7962 | k1jt | 2017-07-27 19:57:53 +0100 (Thu, 27 Jul 2017) | 2 lines
Remove unused arguments from the call to fix_contest_msg().
------------------------------------------------------------------------
r7963 | k1jt | 2017-07-27 21:17:30 +0100 (Thu, 27 Jul 2017) | 1 line
Working on some features for NA VHF contests. Not finished!
------------------------------------------------------------------------
r7964 | bsomervi | 2017-07-28 01:00:42 +0100 (Fri, 28 Jul 2017) | 1 line
Fix syntax error in statement function definition
------------------------------------------------------------------------
r7965 | bsomervi | 2017-07-28 02:20:22 +0100 (Fri, 28 Jul 2017) | 6 lines
Revert "Extend grids looked up from CALL3.TXT from 4 to 6-digits if first 4 match"
Bad idea, need to find a better way to extend grids to 6-digits from
CALL3.TXT.
This reverts commit r7959
------------------------------------------------------------------------
r7968 | k9an | 2017-07-28 16:35:17 +0100 (Fri, 28 Jul 2017) | 1 line
Comment out diagnostic write to lun 81.
------------------------------------------------------------------------
r7969 | k1jt | 2017-07-28 16:50:13 +0100 (Fri, 28 Jul 2017) | 2 lines
Make 72-bit "contest mode" available in FT8 as well as MSK144.
------------------------------------------------------------------------
r7970 | bsomervi | 2017-07-29 00:25:32 +0100 (Sat, 29 Jul 2017) | 7 lines
Change tolerances for auto stop and auto-sequence of some messages
FT8 auto-stop will only react to messages within +/- 50Hz of our Tx
frequency.
Auto-sequence on "DE ..." and free text 73 messages will respond if
they are within 25Hz of our Tx or Rx frequency.
------------------------------------------------------------------------
r7971 | bsomervi | 2017-07-31 02:28:25 +0100 (Mon, 31 Jul 2017) | 1 line
Add extra hidden string length argument to genft8 interface
------------------------------------------------------------------------
r7972 | bsomervi | 2017-07-31 02:28:33 +0100 (Mon, 31 Jul 2017) | 5 lines
Fix FT8 call first behaviour with "Lock Tx=Rx"
Call first combined with "Lock Tx=Rx" (why would anyone consider doing
that!) should continue on the Tx frequency of the station being
worked and not be switched another calling station's frequency.
------------------------------------------------------------------------
r7973 | k1jt | 2017-08-01 19:01:27 +0100 (Tue, 01 Aug 2017) | 1 line
Utility for generating figure for QST/RadCom article.
------------------------------------------------------------------------
r7974 | k1jt | 2017-08-01 19:16:01 +0100 (Tue, 01 Aug 2017) | 2 lines
Tidy up some details for 72-bit contest mode in FT8.
------------------------------------------------------------------------
r7975 | k1jt | 2017-08-01 19:46:12 +0100 (Tue, 01 Aug 2017) | 2 lines
Don't highlight FT8 contest-mode Tx3 message as a free-text message.
------------------------------------------------------------------------
r7976 | k1jt | 2017-08-01 20:32:54 +0100 (Tue, 01 Aug 2017) | 2 lines
Fix the "F4" shortcut description; add usage advuice to "Lock Tx=Rx" tool tip.
------------------------------------------------------------------------
r7980 | k1jt | 2017-08-02 15:05:37 +0100 (Wed, 02 Aug 2017) | 2 lines
Enable "nagain" for FT8, as in other modes.
------------------------------------------------------------------------
r7987 | k1jt | 2017-08-02 20:23:42 +0100 (Wed, 02 Aug 2017) | 2 lines
Updates to the WSJT-X User Guide for Version 1.8.
------------------------------------------------------------------------
r7988 | k1jt | 2017-08-02 20:27:43 +0100 (Wed, 02 Aug 2017) | 2 lines
Add several new screen shots.
------------------------------------------------------------------------
r7989 | k1jt | 2017-08-02 21:43:06 +0100 (Wed, 02 Aug 2017) | 2 lines
Allow auto-seq in QRA64 mode; updates to User Guide.
------------------------------------------------------------------------
r7992 | bsomervi | 2017-08-03 12:23:07 +0100 (Thu, 03 Aug 2017) | 7 lines
Fix an issue with VFO tuning while running Doppler correction
Holding down the SHIFT key while tuning the rig should update the
nominal sked frequency, not holding done the SHIFT key should not
update the sked frequency. This is not yet perfect and sometimes a
change to the nominal sked frequency can get through but it is a rare
as yet unfound race condition.
------------------------------------------------------------------------
r7993 | k9an | 2017-08-03 15:46:21 +0100 (Thu, 03 Aug 2017) | 1 line
1. Use norder=3 for nagain, 2. Renumber aptypes.
------------------------------------------------------------------------
r7994 | k1jt | 2017-08-03 15:48:59 +0100 (Thu, 03 Aug 2017) | 2 lines
Remove the "Weak" checkbox from GUI, it's not implemented.
------------------------------------------------------------------------
r7995 | k1jt | 2017-08-03 16:12:30 +0100 (Thu, 03 Aug 2017) | 2 lines
More updates to the WSJT-X User Guide.
------------------------------------------------------------------------
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx-1.8@7996 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This change also adds seconds resolution to log files and log QSO
fields.
This change makes the log QSO dialog more layout friendly and uses a
QDateTimeEdit for QSO start and end times.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7827 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Working frequencies can be for all regions or for individual IARU
regions. This allows each mode band tuple to have one or more working
frequencies which can include local ones only offered when the user
configures their IARU region.
Change working frequency default suggestions to better fit in
FT8. General rule is FT8 is at JT65 -2kHz except where that is not
possible e.g. where that would fall into a segment not allocated for
narrow band data modes. For tight bands like top band sqeeze existing
JT65 and JT allocations to allow space for FT8.
NOTE: this change changes the WSPR frequency on 80m to allow access to
JA stations that currently have no allocation where it was placed.
ALSO NOTE: the JT65 and JT9 frequencies for 80m move down 6 kHz, again
to accommodate region 3 users. Other appliactions not within our
control should be asked to move in step when 1.8.0 is released.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7810 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
When using split operating and/or rig mode setting there is a delay
before PTT is asserted while the CAT commands are processed. There
will even be a small delay if CAT is only used for PTT. This change
waits for these commands to be completed before starting the user Tx
delay specified in the settings.
There is a notable exception to this in that DX Lab Suite Commander
does not give us a way of knowing when CAT commands have actually been
completed. This combined with the way that Commander spaces CAT
commands, rather than being paced by the rig's CAT responses, means
that delays of more than 1 second are likely. As most rigs suffer some
sort of ALC overshoot when PTT is asserted with audio already present,
it is strongly recommended not to use the DX Lab Suite Commander as a
rig control proxy if your rig may suffer ALC overshoot and you use an
external PA. Please note that using a typical RF power meter to detect
ALC overshoots is unwise as they are rarely fast enough. It is
probably wise to assume that all rigs suffer ALC overshoot since it is
very difficult to design an ALC loop that avoids it.
This change also increases the range of the "Settings->Advanced->Tx
Delay" spin box to 0s up to 2s.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7756 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
These were using a hijacked custom spin box that was designed only for
letters i.e. submodes. Now there are two new custom spin boxes.
HistedSpinBox:- can be set with a list of integer values which the
step up and down will follow. Optionally limits the maximum and
minimum value to the upper and lower bounds of the values set. Note
that intermediate values are still valid.
RestrictedSpinBox:- more like a combo box because the provided values
are the only ones that can be set.
HintedSpinBox is used for the frequency tolerance and
RestrictedSpinBox is used for T/R period.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7698 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
More to come on this but should get Tab 2 basically working with
MSK144 running from a calling frequency.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Ctrl+M (Cmd+M) was being used as a menu shortcut and in key press
event handlers which leads to inconsistent behaviour on some
platforms. Removed menu action shortcut.
Also tidied up handling of the hide controls menu action by making it
a checkable action and using its checked state to store the control
hiding state.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7608 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
1. Level meter range increased to 0-90 dB.
2. Level meter reading is independent of slider setting.
3. For a trial period: thermometer bar goes red if a 16-bit sample
is within 5 dB A/D limit.
4. Slider can be used to adjust levels sent to waterfall.
5. Tx6 message is selected on program startup.
Thanks to W9MDB for most of this code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7596 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Use a header format for polynomial coefficients that includes the
valid X range in scaled terms and a count of the number of
coefficients.
Use double precision consistently for polynomial coefficients. This
includes formatting with sufficient DPs when writing to files.
Many changes to the equalization plots, more to come.
Add error handling for reading coefficient, plot and filter
files. This includes being backward compatible for old format
refspec.dat files with no header.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7578 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This builds on the static phase compensation in the MSK144 decoder and
the phase analysis and polynomial fitting capabilities also in teh
MSK144 decoder, by allowing captured data to be selected for phase
equalization from the WSJT-X UI.
Reads captured phase compensation curve estimate files containing
fitted polynomial coefficients and measured phase data from MSK144
receptions. Intent is to select a compensation curve that is from a
known transmitter like an SDR which have good phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.
Plots of the currently selected polynomial and its modified higher
order terms polynomial which is actually used in equalization (this
plot may be dropped - it is just for kicks at the moment). When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.
Basic maintenance is also included allowing clearing and loading
captured plots and an option to revert to a flat no equalization
curve.
More to come on this as amplitude equalization is also possible, this
will probably be similar, maybe even plotted on the same graph with
dual axes for phase and amplitude. Amplitude correction from a
measured reference spectrum could be viewed and selected for
equalization for all modes. TBC...
This change also introduces the QCustomPlot 3rd party
widget. Currently this is statically linked from a qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring has been completed, which is more in line with the
QCustomPlot author's intentions. This will allow efficient reuse in
other tools shipped with WSJT-X.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Allow band drop down list to be used to select FreqCal frequencies,
also resets position in automatic cycle. Tidy up some unnecessary
code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7486 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
1. Menu item *Tools -> Execute frequency calibration cycle* is renamed and checkable. Cycling does not start until checked.
2. Ctrl+F10 now allows you to cycle manually through the list of calibration frequencies.
3. Calibration sequence lengths can be set to 5, 10, 15, or 30 s with the sbTR spinBox.
Also: don't set sbTR index to 0 when entering a slow mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Rx DF is now "real-time" adjusting the rig in concert with the
monitored DF.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some default time signals have been added to the frequency list so a
base set can be obtained by resetting the frequency list,
alternatively they can be added ad hoc in the normal fashion.
FreqCal mode behavior is to select the lowest cal frequency upon
entering FreqCal mode and cycling through each cal frequency
repeatedly. Ctrl+F10 jumps directly to the next higher frequency.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Deepest decode level should be selected automatically when switching
to JT4 or JT65 when VHF & up mode is on and either of averaging or
deep search are enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7456 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Sub mode and fast mode flag are added to the UDP Status message and
Status messages after appropriate UI changes. MSK144 decodes produce
UDP Decode messages. Fast JT9 messages are treated similarly.
Currently ISCAT decodes are not posted as UDP Decode messages as they
do not fit well with the model.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7389 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The class NetworkAccessManager sub-classes QNetworkAccessManager
adding a message box to ask the user if SSL errors may be
ignored. Ignored errors are ignored in future server replies so that
the user is not asked about he same peer certificate chain repeatedly.
The cache is currently per process only and not persistent.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
... rather than the working frequency.
Users set their working frequency and specify a calling frequency as a
kHz offset into the current Rx MHz with the main window spin box.
Calling CQ on the specified calling frequency is enabled by checking
the associated option.
Also enhanced the auto sequencing to handle short code 73 messages
correctly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
display of the "No More Files..." message until after the "Decode Finished"
message is received.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This change maintains the encapsulation of the MultiSettings class by
using a signal to notify clients of changes to the current
configuration name.
Modifications to the MainWindow class to display the current
configuration name in the status bar, if it is not "Default", based on
MultiSettings events rather than polling for changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7257 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
way to make sure that the new .wav file is ready, before starting wsprd?)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7242 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
of power settings for Transmit and Tune. Also an interim update of
v1.7_Features.txt.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7229 ab8295b8-cf94-4d9e-aec4-7959e3be5d79