------------------------------------------------------------------------
r7861 | k9an | 2017-07-12 22:49:39 +0100 (Wed, 12 Jul 2017) | 1 line
Use quarter-symbol steps for time sync. Lower sync threshold. Implement subtraction and two pass decoding. Use osd2 only near nfqso.
------------------------------------------------------------------------
r7862 | k9an | 2017-07-13 01:28:57 +0100 (Thu, 13 Jul 2017) | 1 line
Fix NHSYM.
------------------------------------------------------------------------
r7863 | k9an | 2017-07-13 01:31:52 +0100 (Thu, 13 Jul 2017) | 1 line
Fix a comment. No code changes.
------------------------------------------------------------------------
r7864 | k9an | 2017-07-13 01:43:56 +0100 (Thu, 13 Jul 2017) | 1 line
Fix another bounds error.
------------------------------------------------------------------------
r7879 | k1jt | 2017-07-14 17:02:01 +0100 (Fri, 14 Jul 2017) | 1 line
Code cleanup and test ofFT8 decodes with erasures. Do not use on the air.
------------------------------------------------------------------------
r7881 | k1jt | 2017-07-14 19:19:48 +0100 (Fri, 14 Jul 2017) | 1 line
Fix nutc in jt9; alternative sync value for late-start FT8 signals.
------------------------------------------------------------------------
r7882 | k9an | 2017-07-14 20:22:53 +0100 (Fri, 14 Jul 2017) | 1 line
Move ft8apset to a separate file.
------------------------------------------------------------------------
r7884 | k9an | 2017-07-14 20:35:22 +0100 (Fri, 14 Jul 2017) | 1 line
Add ft8apset.f90.
------------------------------------------------------------------------
r7885 | k9an | 2017-07-14 20:46:04 +0100 (Fri, 14 Jul 2017) | 1 line
Update call to ft8b.
------------------------------------------------------------------------
r7886 | k9an | 2017-07-14 21:12:29 +0100 (Fri, 14 Jul 2017) | 1 line
More work on ap.
------------------------------------------------------------------------
r7887 | k9an | 2017-07-14 23:09:50 +0100 (Fri, 14 Jul 2017) | 1 line
More work on AP. Deep decode is unstable - not for use on the air.
------------------------------------------------------------------------
r7890 | k9an | 2017-07-15 01:33:25 +0100 (Sat, 15 Jul 2017) | 1 line
Turn off ap.
------------------------------------------------------------------------
r7891 | k9an | 2017-07-15 02:49:44 +0100 (Sat, 15 Jul 2017) | 1 line
Add some more items to the lun 81 diagnostics.
------------------------------------------------------------------------
r7892 | k9an | 2017-07-15 15:21:18 +0100 (Sat, 15 Jul 2017) | 1 line
Properly calculate metrics for non-ap bits that reside in symbols that contain ap bits.
------------------------------------------------------------------------
r7893 | k9an | 2017-07-15 16:43:41 +0100 (Sat, 15 Jul 2017) | 1 line
Use overlap and add to apply reference filter/amplitude equalization.
------------------------------------------------------------------------
r7894 | k9an | 2017-07-15 16:46:46 +0100 (Sat, 15 Jul 2017) | 1 line
Improve a comment.
------------------------------------------------------------------------
r7895 | k9an | 2017-07-16 01:10:37 +0100 (Sun, 16 Jul 2017) | 1 line
Make refspec filter causal for overlap and add.
------------------------------------------------------------------------
r7911 | k9an | 2017-07-16 16:56:06 +0100 (Sun, 16 Jul 2017) | 1 line
More work on Deep decoding.
------------------------------------------------------------------------
r7917 | k9an | 2017-07-16 18:08:09 +0100 (Sun, 16 Jul 2017) | 1 line
Properly round the printed snr.
------------------------------------------------------------------------
r7925 | k9an | 2017-07-18 02:12:11 +0100 (Tue, 18 Jul 2017) | 1 line
Work on ap decoding. Diagnostic write enabled.
------------------------------------------------------------------------
r7926 | k9an | 2017-07-18 16:22:20 +0100 (Tue, 18 Jul 2017) | 1 line
Fix a bug in AP decoding when iaptype=2. Decrease time-sync search range to +/- 1.5s. Fix a big with erasure decoding.
------------------------------------------------------------------------
r7927 | k1jt | 2017-07-20 00:23:20 +0100 (Thu, 20 Jul 2017) | 1 line
Remove slider next to audio level meter.
------------------------------------------------------------------------
r7928 | k1jt | 2017-07-20 16:15:00 +0100 (Thu, 20 Jul 2017) | 6 lines
1. Alt+F8 arms "Call 1st" as if a CQ had been sent.
2. "Call 1st" label turns red when armed to respond to a caller.
3. Suppress some recognizable false decodes, send them to cumulative file
"data_dir/false_decodes.txt".
4. Reduce sleep delay in decoder() to 10 ms.
------------------------------------------------------------------------
r7929 | k1jt | 2017-07-20 20:23:17 +0100 (Thu, 20 Jul 2017) | 1 line
Fix wording in list of keyboard shortcuts.
------------------------------------------------------------------------
r7930 | k1jt | 2017-07-20 20:25:08 +0100 (Thu, 20 Jul 2017) | 2 lines
Comment out diagnostic write.
------------------------------------------------------------------------
r7931 | k9an | 2017-07-20 22:08:36 +0100 (Thu, 20 Jul 2017) | 1 line
Only print dupes if SNR is higher than what has already been printed.
------------------------------------------------------------------------
r7932 | k9an | 2017-07-21 23:02:06 +0100 (Fri, 21 Jul 2017) | 1 line
Add to the list of allowed keywords in jtmsg.f90.
------------------------------------------------------------------------
r7933 | k9an | 2017-07-22 04:01:09 +0100 (Sat, 22 Jul 2017) | 1 line
Add variables lapon and napwid to control ap decoding. Reconfigure the logic for AP decoding and ordered-statistics decoding.
------------------------------------------------------------------------
r7934 | k9an | 2017-07-22 14:21:03 +0100 (Sat, 22 Jul 2017) | 1 line
Prevent a certain type of non-standard message from being flagged as a false decode.
------------------------------------------------------------------------
r7935 | k9an | 2017-07-22 18:12:48 +0100 (Sat, 22 Jul 2017) | 1 line
More informative end-of-line annotation for AP decodes.
------------------------------------------------------------------------
r7936 | k9an | 2017-07-24 15:23:22 +0100 (Mon, 24 Jul 2017) | 1 line
Bring msk144d2 more up to date. Runs now, but still needs more work.
------------------------------------------------------------------------
r7937 | k1jt | 2017-07-24 15:48:16 +0100 (Mon, 24 Jul 2017) | 2 lines
Correct the spacing between marked lowest and highest FT8 tones for RxFreq (green) and TxFreq (red).
------------------------------------------------------------------------
r7938 | bsomervi | 2017-07-24 20:27:14 +0100 (Mon, 24 Jul 2017) | 4 lines
Add double clickable push button and radio button widgets
These emit doubleClicked signal when double-clicked, otherwise they
are identical to their super-classes.
------------------------------------------------------------------------
r7939 | bsomervi | 2017-07-24 20:27:23 +0100 (Mon, 24 Jul 2017) | 42 lines
Add the option to ALT+click a decoded CQ or QRZ message which only
moves the Rx frequency to theirs, this facilitates calling a station
who is busy and may have many callers on their frequency. Updated the
corresponding mouse shortcuts help text.
Allow for times with seconds when parsing fast mode and FT8 decodes.
Exclude the RR73 grid square from and grid validation or matching, it
is not a grid square any more as far as WSJT-X is concerned, it is an
RRR substitute.
Add a simple state machine for QSO progress such that replies and
auto-sequencing can be better controlled.
Get compound callsign edge cases working again and allow QSOs from and
to compound callsign holders working in as many situations as possible
including auto-sequencing and FT8 auto-reply mode. This does mean
that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx
frequency will be taken as a reply to a CQ call despite it not being
explicitly addressed back to the CQ caller. Compound callsigns should
work in MSK144 contest mode also as well as in short code modes with
some minor restrictions (short codes will not be used where
configuration demands that a message be used to send a full compound
callsign).
Auto sequencing has been made generic such that it can be used for
more than one mode if desired.
Allow the use of free text messages to sign off in auto sequenced QSOs
without the message being overwritten by the sequencer. Double click
actions have been added to the Tx5 radio and push buttons to revert
back to the default standard 73 message.
Make DisplayText class interface more idiomatic C++ and simplify a
bit.
Fixed some displayed widget arrangements for different modes and
sub-modes so that they are consistent when starting up and when
switching mode or sub-mode.
This is a big change which has been extensively tested but no doubt
there will also be some new defects introduced.
------------------------------------------------------------------------
r7940 | bsomervi | 2017-07-25 17:51:19 +0100 (Tue, 25 Jul 2017) | 1 line
Fix issue with Tx5 not being generated with a new DX Call
------------------------------------------------------------------------
r7941 | bsomervi | 2017-07-25 17:51:27 +0100 (Tue, 25 Jul 2017) | 1 line
Fix country name display that broke in r7939
------------------------------------------------------------------------
r7942 | bsomervi | 2017-07-25 17:51:34 +0100 (Tue, 25 Jul 2017) | 1 line
Ensure JT9 lowest decode frequency spin box is disabled when not available
------------------------------------------------------------------------
r7943 | bsomervi | 2017-07-25 17:51:42 +0100 (Tue, 25 Jul 2017) | 4 lines
Pick up tail-enders when completing a call 1st QSO after re-enabling auto Tx
Allow any message to start a QSO so long as we are not in an
auto-reply QSO.
------------------------------------------------------------------------
r7944 | bsomervi | 2017-07-25 17:51:49 +0100 (Tue, 25 Jul 2017) | 1 line
Exclude all decode quality markers from internal decode parsing and matching
------------------------------------------------------------------------
r7945 | k9an | 2017-07-25 20:06:05 +0100 (Tue, 25 Jul 2017) | 1 line
Move '?' quality warning to message(22:22).
------------------------------------------------------------------------
r7946 | k9an | 2017-07-25 21:55:13 +0100 (Tue, 25 Jul 2017) | 1 line
Reject candiates with fewer than 7 correct hard-decoded sync symbols.
------------------------------------------------------------------------
r7947 | bsomervi | 2017-07-26 02:38:37 +0100 (Wed, 26 Jul 2017) | 1 line
Force Settings tab to Radio tab when navigating there from a rig error message
------------------------------------------------------------------------
r7948 | bsomervi | 2017-07-26 02:38:44 +0100 (Wed, 26 Jul 2017) | 1 line
Correct the highlighting of the Call 1st check box label
------------------------------------------------------------------------
r7949 | bsomervi | 2017-07-26 02:38:57 +0100 (Wed, 26 Jul 2017) | 5 lines
Option to skip using grid reply message
Enable and disable by double-clicking the Tx1 button or the adjacent
radio button. Tx1 message shows grayed out when the Tx1 message is
elided.
------------------------------------------------------------------------
r7950 | bsomervi | 2017-07-26 02:39:04 +0100 (Wed, 26 Jul 2017) | 6 lines
Option to use RR73 grid message as RRR message substitutes
Enable or disable by double-clicking the Tx4 button or the adjacent
radio button. Is auto disabled by a band change as it is expected that
the user reassess the conditions to see if message repetitions are
unlikely to be needed.
------------------------------------------------------------------------
r7951 | bsomervi | 2017-07-26 02:39:11 +0100 (Wed, 26 Jul 2017) | 1 line
Fix highlighting of the call first check box label
------------------------------------------------------------------------
r7952 | bsomervi | 2017-07-26 02:39:23 +0100 (Wed, 26 Jul 2017) | 1 line
Better behavior and tool tips for Txn buttons and radio buttons
------------------------------------------------------------------------
r7953 | bsomervi | 2017-07-26 02:39:30 +0100 (Wed, 26 Jul 2017) | 1 line
Auto Tx stop when calling a CQer who answers another station on your Tx frequency
------------------------------------------------------------------------
r7954 | bsomervi | 2017-07-26 11:56:12 +0100 (Wed, 26 Jul 2017) | 1 line
Add menu option to turn on AP decoding in FT8 mode
------------------------------------------------------------------------
r7955 | k9an | 2017-07-26 14:05:34 +0100 (Wed, 26 Jul 2017) | 1 line
Enable AP for any decoding level.
------------------------------------------------------------------------
r7956 | k1jt | 2017-07-26 14:44:31 +0100 (Wed, 26 Jul 2017) | 1 line
Remove obsolete test program.
------------------------------------------------------------------------
r7957 | bsomervi | 2017-07-26 22:18:59 +0100 (Wed, 26 Jul 2017) | 11 lines
Use the low confidence decode quality marker to elide spots and pass info via UDP
The UDP decode and reply message have been augmented with a boolean
flag denoting a low confidence decode when set. Existing clients can
safely use the reply message without passing the flag as the default
value will still action messages that have high confidence. If low
confidence decodes are to be passed back via the reply message then
the low confidence flag must be included and correctly set to match
the original decode.
See NetworkMessage.hpp for message fields and meanings.
------------------------------------------------------------------------
r7958 | bsomervi | 2017-07-26 22:19:21 +0100 (Wed, 26 Jul 2017) | 3 lines
Add QSO state machine state and tx audio offset to parameters passed to slow decoders
Required to pick best AP masks in FT8 decoder
------------------------------------------------------------------------
r7959 | bsomervi | 2017-07-26 23:03:02 +0100 (Wed, 26 Jul 2017) | 1 line
Extend grids looked up from CALL3.TXT from 4 to 6-digits if first 4 match
------------------------------------------------------------------------
r7960 | k9an | 2017-07-27 16:35:40 +0100 (Thu, 27 Jul 2017) | 1 line
nQSOProgress now controls AP decoding. Needs testing - may not be stable with AP enabled.
------------------------------------------------------------------------
r7961 | k9an | 2017-07-27 19:07:54 +0100 (Thu, 27 Jul 2017) | 1 line
Correct some logic so that AP is only on when selected and so that AP decodes of type 4 or greater are limited to the vicinity of nfqso or nftx.
------------------------------------------------------------------------
r7962 | k1jt | 2017-07-27 19:57:53 +0100 (Thu, 27 Jul 2017) | 2 lines
Remove unused arguments from the call to fix_contest_msg().
------------------------------------------------------------------------
r7963 | k1jt | 2017-07-27 21:17:30 +0100 (Thu, 27 Jul 2017) | 1 line
Working on some features for NA VHF contests. Not finished!
------------------------------------------------------------------------
r7964 | bsomervi | 2017-07-28 01:00:42 +0100 (Fri, 28 Jul 2017) | 1 line
Fix syntax error in statement function definition
------------------------------------------------------------------------
r7965 | bsomervi | 2017-07-28 02:20:22 +0100 (Fri, 28 Jul 2017) | 6 lines
Revert "Extend grids looked up from CALL3.TXT from 4 to 6-digits if first 4 match"
Bad idea, need to find a better way to extend grids to 6-digits from
CALL3.TXT.
This reverts commit r7959
------------------------------------------------------------------------
r7968 | k9an | 2017-07-28 16:35:17 +0100 (Fri, 28 Jul 2017) | 1 line
Comment out diagnostic write to lun 81.
------------------------------------------------------------------------
r7969 | k1jt | 2017-07-28 16:50:13 +0100 (Fri, 28 Jul 2017) | 2 lines
Make 72-bit "contest mode" available in FT8 as well as MSK144.
------------------------------------------------------------------------
r7970 | bsomervi | 2017-07-29 00:25:32 +0100 (Sat, 29 Jul 2017) | 7 lines
Change tolerances for auto stop and auto-sequence of some messages
FT8 auto-stop will only react to messages within +/- 50Hz of our Tx
frequency.
Auto-sequence on "DE ..." and free text 73 messages will respond if
they are within 25Hz of our Tx or Rx frequency.
------------------------------------------------------------------------
r7971 | bsomervi | 2017-07-31 02:28:25 +0100 (Mon, 31 Jul 2017) | 1 line
Add extra hidden string length argument to genft8 interface
------------------------------------------------------------------------
r7972 | bsomervi | 2017-07-31 02:28:33 +0100 (Mon, 31 Jul 2017) | 5 lines
Fix FT8 call first behaviour with "Lock Tx=Rx"
Call first combined with "Lock Tx=Rx" (why would anyone consider doing
that!) should continue on the Tx frequency of the station being
worked and not be switched another calling station's frequency.
------------------------------------------------------------------------
r7973 | k1jt | 2017-08-01 19:01:27 +0100 (Tue, 01 Aug 2017) | 1 line
Utility for generating figure for QST/RadCom article.
------------------------------------------------------------------------
r7974 | k1jt | 2017-08-01 19:16:01 +0100 (Tue, 01 Aug 2017) | 2 lines
Tidy up some details for 72-bit contest mode in FT8.
------------------------------------------------------------------------
r7975 | k1jt | 2017-08-01 19:46:12 +0100 (Tue, 01 Aug 2017) | 2 lines
Don't highlight FT8 contest-mode Tx3 message as a free-text message.
------------------------------------------------------------------------
r7976 | k1jt | 2017-08-01 20:32:54 +0100 (Tue, 01 Aug 2017) | 2 lines
Fix the "F4" shortcut description; add usage advuice to "Lock Tx=Rx" tool tip.
------------------------------------------------------------------------
r7980 | k1jt | 2017-08-02 15:05:37 +0100 (Wed, 02 Aug 2017) | 2 lines
Enable "nagain" for FT8, as in other modes.
------------------------------------------------------------------------
r7987 | k1jt | 2017-08-02 20:23:42 +0100 (Wed, 02 Aug 2017) | 2 lines
Updates to the WSJT-X User Guide for Version 1.8.
------------------------------------------------------------------------
r7988 | k1jt | 2017-08-02 20:27:43 +0100 (Wed, 02 Aug 2017) | 2 lines
Add several new screen shots.
------------------------------------------------------------------------
r7989 | k1jt | 2017-08-02 21:43:06 +0100 (Wed, 02 Aug 2017) | 2 lines
Allow auto-seq in QRA64 mode; updates to User Guide.
------------------------------------------------------------------------
r7992 | bsomervi | 2017-08-03 12:23:07 +0100 (Thu, 03 Aug 2017) | 7 lines
Fix an issue with VFO tuning while running Doppler correction
Holding down the SHIFT key while tuning the rig should update the
nominal sked frequency, not holding done the SHIFT key should not
update the sked frequency. This is not yet perfect and sometimes a
change to the nominal sked frequency can get through but it is a rare
as yet unfound race condition.
------------------------------------------------------------------------
r7993 | k9an | 2017-08-03 15:46:21 +0100 (Thu, 03 Aug 2017) | 1 line
1. Use norder=3 for nagain, 2. Renumber aptypes.
------------------------------------------------------------------------
r7994 | k1jt | 2017-08-03 15:48:59 +0100 (Thu, 03 Aug 2017) | 2 lines
Remove the "Weak" checkbox from GUI, it's not implemented.
------------------------------------------------------------------------
r7995 | k1jt | 2017-08-03 16:12:30 +0100 (Thu, 03 Aug 2017) | 2 lines
More updates to the WSJT-X User Guide.
------------------------------------------------------------------------
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx-1.8@7996 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This change allows allocations for JT9+JT65 dual mode to be fine
tuned. This in turn will hopefully allow some space for the new FT8
mode to be shoehorned in on bands with little or no free space. For
example on top band users could set the lowest JT9 decode offset at
1000 Hz and set the FT8 default working frequency at 1.839 MHz. Thus
allowing 1000 Hz for JT65, 1000 Hz for JT9 and 1000 Hz for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7809 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
QWidget::isVisible() and QWidget::isHidden() unsurprisingly are not
directly complementary, in this case QWidget::isHidden() is the needed
functionality.
Thanks to Mike W9MDB for the initial version of this change.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7702 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The wide graph class handles 60m band behaviour of the minimum decoded
JT9 DF internally without leaking implementation details.
On 60m the lowest JT9 DF is always zero and the spin box to set it is
disabled. This reflects that 60m only has narrow channels and JT9
signals should share the same dial frequency as JT65 signals.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7668 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Thanks to Mike, W9MDB, for this contribution.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7604 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
"JT65 nnnn JT9" blue line to 0 Hz. Now it also moves the spinner to
0 Hz, as it should have done. Subsequent QSY to another band will reset
the blue line and spinner to where they had been, before the QSY to 60 m.
Thanks to W9MDB for this patch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7595 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Instead of using the Qt QMessageBox class directly a new class
MessageBox (MessageBox.hpp) has been added to deal with platform
independence issues like the title not being shown on Mac OS X.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
These were discovered when running under teh valgrind MemCheck tool. I
have also checked in a suppressions file (wsjtx-valgrind.linux.supp)
suitable for use on Linux when running the valgrind MemCheck tool.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Static storage variables that should have been class members are made
so. This ensures that if they are used as initialization one time
switches then they will operate correctly when their class
instantiated more than once. This now happoens for most classes due to
the configurations switching facility which destroys all windows and
re-instantiates them.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6661 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Don't display orange warning bar when in WSPR mode.
3. Fix a longstanding compiler warning.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6616 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Forbid consecutive Tx sequences.
Mark Tx sequences with horizontal yellow line in waterfall.
Reduce the wait time in msleep() command (mainwindow.cpp line 4342).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This merge brings the WSPR feature development into the main line
ready for release in a future v1.6 release.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
procedure; better window functions for some FFTs, resulting in
better decoder performance; User-selectable colors for backgrounds
of decoded messages. NB: more testing is desirable!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4951 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Do not drop through shortcut key handling so that spurious responses
are avoided.
The keyPressEvent handlers must call the super class implementation if
the event os not handled.
Correct a typo in the shortcut help display.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some rigs either do not honour some CAT commands while transmitting or
interpret them incorrectly. To deal with this a settings option to
allow TX frequency changes while transmitting has been added with a
default value of off.
Any UI actions that directly or indirectly change the TX frequency are
guarded according to this new option. As well as this band changes and
use of the +2kHz check box are disabled and guarded respectively in
transmit mode.
Mode changes via the menu are now disabled while transmitting.
When TX frequency changes are allowed; frequency changes are correctly
implemented while in tune mode.
Double clicking decodes while transmitting now correctly regenerate
and change the message sent on the fly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The new class WFPalette encapsulates waterfall palettes including
exporting and importing to disk files and interpolation for use in the
waterfall plotter.
A special entry in the palette list "User Defined" is now available
along with a button to invoke a colour palette designer. The user
defined palette definition is persistent across runs as it is saved in
the application settings file.
Palettes can now have any number of colours up to 256.
The export function may be used to save user designed palettes; to be
added to the built in resource palettes that are shipped with the
application.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3964 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This allows writable files to be located in the "correct"
location for each platform rather than in the directory of
the executable which, in general, is not recommended or
allowed in some cases.
A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to
switch be tween old and new functionality, currently it is on
by default. It can be turned off by defining it to a false
value (0) or more simply with cmake-gui setting the option
with the same name. JTAlert can only work with the old
non-standard file locations until Laurie VK3AMA chooses to
support the new file locations.
Even if the above is not enabled; the QSettings file is
written to a user specific location so it will be shared by
all instances of the program (i.e. across upgrades). See
below for multiple concurrent instance support changes.
Added a command line parser module for Fortran.
Added 'lib/options.f90' to facilitate more complex argument
passing to jt9 to cover explicit file locations.
Changed the way multiple concurrent instances are handled.
This is to allow the program to be run multiple times from
the same installation directory.
A new wsjtx command line optional argument is available "-r"
or "--rig" which enables multiple concurrent instance
support. The parameter of the new option is a unique name
signifying a rig or equivalent. The name is used as the
shared memory segment key and in window titles. The name is
also used to access unique settings files and writable data
files like ALL.TXT and log files. No attempt has been made
to share these files between concurrent instances.
If "-r" or "--rig" is used without a parameter it still
enables multiple concurrent instance support for that
instance. All instances must use a unique parameter, one of
which may be empty.
The rig name is appended the
QCoreApplication::applicationName() for convenient usage like
window titles.
Set non Qt locale to "C".
This ensures that C library functions give consistent results
whatever the system locale is set to. QApplication follows
the system locale as before. Thus using QApplication and its
descendants like widgets and QString for all user visible
formating will give correct l10n and using C/C++ library will
give consistent formatting across locales.
Added top level C++ exception handling to main.cpp.
Because the new transceiver framework uses exceptions
internally, the main function now handles any exceptions that
aren't caught.
Retired devsetup, replaced with Configuration.
Configuration is a class that encapsulates most of the
configuration behavior. Because rig configuration is so
closely coupled with rig operation, Configuration serves as a
proxy for access to the rig control functions. See
Configuration.hpp for more details of the Configuration
interface.
Menu changes.
Various checkable menu actions moved from main menu to the
Configuration dialog. The whole settings menu has been
retired with the single "Settings..." action moved to the
file menu for consistency on Mac where it appears as
"Preferences" in line with Mac guidelines.
New data models for data used by the application.
ADIF amateur band parameters, free text message macros, spot
working frequencies and, station information (station
descriptions and transverter offsets per band) each implement
the QAbstractItemModel interface allowing them to be used
directly with Qt view widgets (Bands.hpp, FrequencyList.hpp
and, StationList.hpp). Configuration manages maintenance of
an instance of all but the former of the above models. The
ADIF band model is owned by Configuration but requires no
user maintenance as it is immutable.
Band combo box gets more functionality.
This widget is now an editable QComboBox with some extra
input capabilities.
The popup list is still the list of spot working frequencies,
now showing the actual frequency decorated with the band
name. This allows multiple spot frequencies on a band if
required.
The line edit allows direct frequency entry in mega-Hertz
with a completer built in to suggest the available spot
working frequencies. It also allows band name entry where
the first available spot working frequency is selected.
Recognized band names are those that are defined by the ADIF
specification and can be found in in the implementation of
the ADIF bands model (Bands.cpp).
If an out of band frequency is chosen, the line edit shows a
warning red background and the text "OOB". Out of band is
only defined by the ADIF band limits which in general are
wider than any entities regulations.
Qt 5.2 now supports default audio i/p and o/p devices.
These devices are placeholders for whatever the user defines
as the default device. Because of this they need special
treatment as the actual device used is chosen at open time
behind the scenes.
Close-down behavior is simplified.
The close-down semantics were broken such that some objects
were not being shut down cleanly, this required amendments to
facilitate correct close down of threads.
User font selection added to Configuration UI.
Buttons to set the application font and the font for the band
and Rx frequency activity widgets have been added to the
Configuration UI to replace the file based font size control.
Free text macros now selected directly.
The free text line edit widgets are now editable combo boxes
that have the current free text macro definitions as their
popup list. The old context menu to do this has been
retired.
Astronomical data window dynamically formatted and has font a chooser.
This window is now autonomous, has its own font chooser and,
dynamically resizes to cover the contents.
Double click to Tx enabled now has its own widget in the status bar.
QDir used for portable path and file name handling throughout.
The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now
checkable.
Being checkable allows these buttons control their own state
and rendering.
Calls to PSK Reporter interface simplified.
In mainwindow.cpp the calls to this interface are
rationalized to just 3 locations.
Manipulation of ALL.TXT simplified.
Moved, where possible, to common functions.
Elevated frequency types to be Qt types.
Frequency and FrequencyDelta defined as Qt types in their
meta-type system (Radio.hpp). They are integral types for
maximum accuracy.
Re-factored rig control calls in mainwindow.cpp.
The new Configuration proxy access to rig control required
many changes (mostly simplifications) to the MainWindow rig
control code. Some common code has been gathered in member
functions like qsy(), monitor(), band_changed() and
auto_tx_mode().
Rig control enhancements.
The rig control for clients interface is declared as an
abstract interface (See Transceiver.hpp). Concrete
implementations of this interface are provided for the Hamlib
rig control library, DX Lab Suite Commander via a TCP/IP
command channel, Ham Radio Deluxe also via a TCP/IP command
channel and, OmniRig via its Windows COM server interface.
Concrete Transceiver implementations are expected to be moved
to a separate thread after construction since many operations
are blocking and not suitable for running in a GUI thread.
To facilitate this all instantiation of concrete Transceiver
instances are handled by Configuration using a factory class
(TransceiverFactory) for configuration parameter based
instantiation.
Various common functionality shared by different rig
interface implementations are factored out into helper base
classes that implement or delegate parts of the Transceiver
interface. They are TransceiverBase which caches state to
minimize expensive rig commands, it also maps the Transceiver
interface into a more convenient form for implementation
(template methods). PollingTransceiver that provides a state
polling mechanism that only reports actual changes.
EmulateSplitTransceiver that provides split operation by
QSYing on PTT state changes.
EmulateSplitTransceiver can be used with any implementation
as it follows the GoF Decorator pattern and can wrap any
Transceiver implementation.
OmniRigTransceiver is derived directly from TransceiverBase
since it doesn't require polling due to its asynchronous
nature. OmniRigTransceiver is only built on Windows as it is
a COM server client. To build it you must first install the
OmniRig client on the development machine
(http://www.dxatlas.com/omnirig/).
DXLabSuiteCommanderTransceiver derives from
PollingTransceiver since it is a synchronous communications
channel. No third party library is required for this
interface.
HRDTransceiver also derives from PollingTransceiver. The HRD
interface library has been reverse engineered to provide
functionality with all available versions of HRD. No third
party libraries are required.
HamlibTransceiver likewise derives from PollingTransceiver
since the Hamlib asynchronous interface is non-functional.
Although this class will interface with the release version
of Hamlib (1.2.15.3); for correct operation on most rigs it
needs to run with the latest master branch code of Hamlib.
During development many changes to Hamlib have been submitted
and accepted, hence this requirement. Hamlib source can be
obtained from git://git.code.sf.net/p/hamlib/code and at the
time of writing he master branch was at SHA 6e4432.
The Hamlib interface directly calls the "C" interface and the
modified rigclass.{h,cpp} files have been retired.
There is a rig type selection of "None" which may be used for
non-CAT rigs, this is actually a connection to the dummy
Hamlib device.
PollingTransvceiver derives from TransceiverBase and
TransceiverBase derives from the Transceiver interface.
Each interface implementation offers some possibility of PTT
control via a different serial port than the CAT port. We
also support PTT control directly via a second serial port.
This is done by delegating to a dummy Hamlib instance which
is only used for PTT control. This means that
DXLabSuiteCommanderTransceiver, HRDTransceiver and
OmniRigTransceiver always wrap a dummy HamlibTransceiver
instance. The factory class TransceiverFactory manages all
these constructional complexities.
Serial port selection combo boxes are now editable with a
manually entered value being saved to the settings file.
This allows a non-standard port device to be used without
having to edit the settings file manually.
For TCP/IP network CAT interfaces; the network address and
port may be specified allowing the target device to be
located on a different machine from the one running wsjtx if
required. The default used when the address field is left
blank is the correct one for normal usage on the local host.
Selecting a polling interval of zero is no longer possible,
this is because the rig control capability can no longer
support one way connection. This is in line with most other
CAT control software.
In the Configuration dialog there are options to select split
mode control by the software and mode control by the
software. For the former "None", "Rig" and "Fake it" are
available, for the latter "None", "USB" and, "Data" are
available. Because tone generation is implicitly linked to
split mode operation; it is no longer possible to have the
software in split mode and the rig not or vice versa. This
may mean some rigs cannot be used in split mode and therefore
not in dual JT65+JT9 until issues with CAT control with that
rig are resolved. Single mode with VOX keying and no CAT
control are still possible so even the most basic transceiver
setup is supported as before.
Configuration now supports a frequency offset suitable for
transverter operation. The station details model
(StationList.hpp) includes a column to store an offset for
each band if required.
CMake build script improvements.
The CMakeLists.txt from the 'lib' directory has been retired
with its contents merged into the top level CMakeLists.txt.
Install target support has been greatly improved with the
Release build configuration now building a fully standalone
installation on Mac and Windows. The Debug configuration
still builds an installation that has environment
dependencies for external libraries, which is desirable for
testing and debugging.
Package target support is largely complete for Mac, Windows
and, Linux, it should be possible to build release installers
directly from CMake/CPack.
Cmake FindXXXX.cmake modules have been added to improve the
location of fftw-3 and Hamlib packages.
Version numbers are now stored in Versions.cmake and work in
concert with automatic svn revision lookup during build. The
version string becomes 'rlocal'± if there are any uncommitted
changes in the build source tree.
Moved resource like files to Qt resources.
Because location of resource files (when they cannot go into
the installation directory because of packaging rules) is
hard to standardize. I have used the Qt resource system for
all ancillary data files. Some like kvasd.dat are dumped out
to the temp (working directory) because they are accessed by
an external program, others like the audio samples are copied
out so they appear in the data directory under the default
save directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Note to developers: Not sure about the makefiles...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3835 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Detector no longer collects samples when transmitting or not
monitoring. This was causingissues with the waterfall after tx periods
and was a waste of CPU cycles.
Correct the missing window title on the waterfall window.
Stop and restart the output audio stream if the configuration of
device or channels changes in the setup dialog. This defect was
causing spurious transmissions after changing configuration.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3543 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Audio input can be mono, left of stereo pair or, right of stereo
pair. Audio output can be mono, left of stereo pair, right of stereo
pair or, both of stereo pair (the same output goes to both channels in
both mode). Settings are remembered between sessions.
Stream channel suport is implemented mainly in the new AudioDevice
class which is now the base class of Modulator and Detector.
Audio channels are selected on the configuration screen. Only
supported channel configurations per device can be selected.
Audio output volume (actually attenuation) is now possible from the
GUI. I have added a slider control to the main window; I don't
necessarily propose this as a final release location for the widget as
I understand that changes to the main screen are sensitive. This
location is just a starting suggestion for a trial. The volume
(attenuation) setting is remembered between sessions and is not device
dependent. This addresses all issues of volume setting on *nix
versions since there is no need to use pavucontrol to set audio
levels. The volume (attenuation) action is logarithmic.
Shaped CW keying has been implemented in Modulator although it is
currently disabled as I am not 100% happy wth the implementation. If
you want to try it define the C++ preprocessor macro WSJT_SOFT_KEYING
in your build.
The Modulator instance has been moved to the same thread as the
SoundOutput instance as it should have been since the output callback
already operates in that thread. Cross thread slots are now correctly
called in a thread safe way as a result.
A number of files where in the SVN repository with DOS line endings
which I have removed. SVN users on Windows need set the config for
native line endings so that DOS line endings are automatically
stripped on checkin.
The DevSetup class now holds it's UI o the heap to reduce imapact on
build dependencies.
The application settings are now passed to objects from the main.cpp
file. Management of settings are moved to the responsible classes (top
level windows). This has involved a few settings moving groups so
users will see some settings reverting to default values on the first
run of an update.
Persistance of top level windows geometry and position is now handled
in the recommened manner (constructor for load, closeEvent for store
in modal windows and, hideEvent for store in modeless dialogs).
The MainWindow class now holds its children as members rather than
global variables.
The LogQSO class now hides its implementation and takes responsibility
for its own settings and widows rendering parameters. A new settings
file group is implemented to persist the LogQSO class settings.
The WideGraph class now hides its implementation and manages its own
settings and window rendering parameters.
--This line, and those below, will be ignored--
M Modulator.cpp
M rigclass.cpp
M widegraph.cpp
M signalmeter.cpp
M soundin.cpp
M soundout.cpp
M mainwindow.h
M main.cpp
M meterwidget.h
M devsetup.cpp
M mainwindow.ui
M Detector.cpp
M logqso.h
M rigclass.h
M mainwindow.cpp
M meterwidget.cpp
M soundin.h
M devsetup.ui
M wsjtx.pro
M devsetup.h
M logqso.cpp
M Modulator.hpp
M psk_reporter.cpp
M killbyname.cpp
M Detector.hpp
M signalmeter.h
M widegraph.h
M psk_reporter.h
M soundout.h
M PSKReporter.h
M lib/afc65b.f90
M lib/gran.c
M lib/usleep.c
M lib/afc9.f90
M lib/wrapkarn.c
A AudioDevice.hpp
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Minor adjustments to position of WideGraph controls.
3. Include the palette files. The whole directory "Palettes" should
be copied into the install directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3529 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Add basic proof-of-concept code that uses QAudioInput instead of
PortAudio for sound input. By default, this test code is not active,
and it compiles using PortAudio. To compile using QAudio, uncomment
the line
#DEFINES += QAUDIO_INPUT
in wsjtx.pro. Note that device selection in the QAudio code is presently
hard-wired to use the default input device. You can change this
choice on line 267 in soundin.cpp.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3510 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
memory region smaller by some 150 MB.)
2. Some code cleanup (removing unused lstrong, etc.)...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
