3529 Commits

Author SHA1 Message Date
Joe Taylor
77dd02c81c Fix a problem in msk144spd that caused some flaky behavior.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7458 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 18:28:26 +00:00
Bill Somerville
2c658aef33 Add support for the IC-7200 via HRD
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7457 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 13:53:13 +00:00
Bill Somerville
e8163a7eba Tidy up decode menu actions and correct defect in logic
Deepest decode  level should be selected  automatically when switching
to JT4  or JT65 when VHF  & up mode is  on and either of  averaging or
deep search are enabled.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7456 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 13:53:06 +00:00
Bill Somerville
03ab8881d4 Remove unnecessary main window size constraints
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7455 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 13:52:59 +00:00
Bill Somerville
16541b58f1 Add index section to PDF User Guide
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7454 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 13:45:07 +00:00
Joe Taylor
467386f913 Minor code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 22:45:36 +00:00
Joe Taylor
58d961af83 First usable-at-K1JT version of a semi-automated Frequency Calibration routine.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7452 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 20:20:43 +00:00
Joe Taylor
7c483fa17f More work on FreqCal mode. Some of this code is temporary!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7451 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 18:35:26 +00:00
Steven Franke
4086e93da5 Tuning NSHMEM - number of Sh/SWL decodes to remember and test against.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7450 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 03:35:33 +00:00
Steven Franke
7e81042ab5 More progress on SWL mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7449 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 02:26:55 +00:00
Joe Taylor
94e596589a Further progress toward a usable "FreqCal" (Frequency Calibration) mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7448 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 19:07:35 +00:00
Steven Franke
f6a68e0842 Tweaks to reject certain types of spurious decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7447 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 01:16:19 +00:00
Joe Taylor
01def5813f Some possibly temporary ideas, playing around with a "FreqCal" mode to do simple frequency calibrations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7446 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 21:37:38 +00:00
Steven Franke
9a5f73e00d Improve SWL mode performance.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7445 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 20:55:10 +00:00
Joe Taylor
f657b1de5b Clarify a Tool Tip.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7444 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 13:21:14 +00:00
Steven Franke
11efc73444 Make msk144d2 -e (Eve mode) option work.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7443 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-02 20:13:47 +00:00
Joe Taylor
0a8697f82c 1. We did the experiment: users clearly prefer a "Prompt to log QSO"
only when 73 is sent.  Revert to that well-established behavior.
2. Correct the logic that detects short-form RO, RRR, and 73 messages in
JT65 VHF modes and color-highlights the Tx message box.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7442 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-02 14:22:29 +00:00
Steven Franke
9f5f9dc1a3 Lower SWL SNR thresholds by one notch. Note that the xsnr that is compared to the threshold is the nonlinear snr from squared signal spectrum, not 'real' snr.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7441 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-02 03:56:29 +00:00
Steven Franke
aaed230437 Only print SWL-mode decodes if SNR is high enough. Needs tuning - thresholds may be set too high.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7440 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 22:15:29 +00:00
Steven Franke
da2d6a5314 Print <nhash> in SWL mode if decoded hash doesn't match an entry in the hasharray.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7439 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 18:50:21 +00:00
Steven Franke
040a42e467 Tweak.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7438 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 16:45:47 +00:00
Steven Franke
219b67566c More progress on SWL mode. Needs testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7437 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-01 16:34:20 +00:00
Steven Franke
3db76959cb Bring the command-line MSK144 decoder up-to-date.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7436 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-31 02:57:20 +00:00
Joe Taylor
c3e4543fe4 Remove a diagnostic.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7435 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-31 02:51:33 +00:00
Steven Franke
8f0dba46ab Progress toward SWL capability. Not finished and not tested.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7434 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-31 02:05:51 +00:00
Joe Taylor
d1fc52e1cd 1. Starting to add SWL feature for MSK144 Sh messages.
2. Add (part of) a geometry patch from W9MDB.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7433 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 21:46:29 +00:00
Steven Franke
8cb97ad9c0 Remove some dead code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7432 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 20:26:59 +00:00
Joe Taylor
3182b273dd I throw in the towel. Prompt to log QSO when *either* RRR or 73 is sent.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7431 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 19:04:51 +00:00
Joe Taylor
220c866b8f Options (via Ctrl+M) to minimize size of Main Window and Wide Graph; add separate Start/End times to logging information. Thanks to W9MDB!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7430 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 15:45:31 +00:00
Joe Taylor
8015dfea7f 1. No 2 kHz frequency offset for JT9 on 60m band.
2. Don't update the "Last Tx" message until current transmission is complete.
These suggestions from W9MDB.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7429 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-29 18:08:32 +00:00
Steven Franke
3c522a66e9 Fix a bug in analytic.f90 and enable amplitude flattening. This version is not intended for general use on MSK144 as it uses hardwired coefficients derived for use with a specific radio.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7428 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-29 01:52:55 +00:00
Steven Franke
1c32d49cc7 Decrease number of frames that must be averaged for valid dynamic equalization.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7427 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-27 14:30:00 +00:00
Joe Taylor
e40d1399c3 Add "Clear reference spectrum" to the File menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7426 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-24 20:05:28 +00:00
Joe Taylor
4f8bf753e6 Make the Tx# buttons narrower.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7425 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-23 18:59:37 +00:00
Joe Taylor
bb2108acda 1. As a test, zap any data at start if id2() that appears to be a T/R transient.
2. Send emedelay (now 0 or 2.5) to QRA64 decoder.
3. Tweaks to sync64, making it better for QRA64A.
4. Mainwindow MessageBox if it attempts to open a file with wrong format.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 20:51:27 +00:00
Steven Franke
ed35ac6cd2 Add -r (Rx Equalize) option to command-line MSK144 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7423 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 18:17:23 +00:00
Steven Franke
17b49929e0 Tweaks.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7422 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:36:03 +00:00
Steven Franke
cbdcde20ea Add an option on advanced time to enable MSK144 Rx filter equalizer. Other changes necessary to accommodate coexistence of static (Rx Filter) and dynamic (QSO partner-dependent) phase corrections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7421 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:21:23 +00:00
Joe Taylor
6ebda04e89 Back out the temporary changes for WSPR-15 in r7418 and 7419.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7420 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 14:24:56 +00:00
Joe Taylor
05be0614d8 Allow WPR-15 Tx audio freq up to 1625 Hz.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7419 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:31:30 +00:00
Joe Taylor
ceb1c6aa0a Test code: starting to implement WSPR-15. Not for general use!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7418 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:26:49 +00:00
Joe Taylor
db1c667ad4 Add code to make wsprcode functional. (NB: most of these routines are otherwise
obsolete; they come from WSPR 2.0, etc.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7417 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 18:50:18 +00:00
Steven Franke
74e97a4d88 Define a default mygrid in the command line MSK144 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7416 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 16:04:08 +00:00
Joe Taylor
fb6d780574 No need to truncate the decoded text line going to ALL.TXT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7415 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:35:16 +00:00
Joe Taylor
ba4f0f1271 Further adjustments to sync64; extend QRA64 data length to 54 s; some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7414 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:27:23 +00:00
Joe Taylor
8edf9c7dc3 Remove the QRA64 test on sync2 -- it was not helpful.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7413 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 14:09:45 +00:00
Steven Franke
0f7359a5c9 Changes needed to accommodate channel equalization implemented in the new msk144signalquality.f90. Warning - msk144signalquality writes to the executable directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7412 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 03:01:43 +00:00
Steven Franke
f606a9cb09 Calculates # of bit errors and eye-opening on every call, estimates channel phase on startup and whenever DX Call changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7411 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 02:53:57 +00:00
Steven Franke
c82ce7b9ec Make the command-line MSK144 decoder work again.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7410 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 02:49:22 +00:00
Joe Taylor
acb6b70397 I was too strict on the sync2 and width limits. This is much better for QRA64E!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7407 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-19 20:14:31 +00:00