It appears that the HRD logbook interferes with the HRD IP server
causing it to fail to respond to pending commands. This enhancement
adds a number of retries to the send command to HRD operation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4241 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The Qt test mode that uses special paths for writeable files (via
QtStandardPaths) doesn't make a special temporary file path. This
change appends " - test_mode" to the WSJT-X unique temporary file path
so that an application run in test mode will not interact with another
running in normal mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4240 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
It appears that Hamlib uses two different return codes to indicate
missing functionality and doesn't use them consistently. The Hamlib
rig control code now checks for either code when testing for function
availability.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4239 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Because some HRD rig interface implementations are lacking features we
need, instead of failing fatally when a needed feature is missing, we
now do not require the missing feature. This means that some rigs will
not work correctly, for example setting split, PTT or mode may not
work if no such feature is present in the HRD interface.
This came about due to the TenTec Omvi VII HRD interface having no
split, vfo selection or, PTT facilities. With this change at least
some basic functionallity is possible.
Not being able to set split is potentially dangerous since WSJT-X may
set tones assumeing a split TX frequency. Until the HRD CAT interface
has a mechanisim to signal the missing capability we will have to hope
that users realise the deficiency and don't attempt to enable split
working on such a setup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4235 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The Hamlib backe end capabilities table is not reliable when the back
end is the Hamlib Net one. This is because that back end claims all
functions available but a call may fail on execution due to the actual
remote back end target not supporting it.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4234 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Hamlib knows for each rig back-end which type of PTT switching is
available, we don't need to set it as the default is always
correct. Setting it to "RIG" was disabling the ability to use the rear
audio input select version of CAT PTT on rigs that support it
e.g. Kenwood TS-590s.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4224 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The TXAudioSource was being saved as a boolean value instead of the
enumeration value. This caused the read back from settings logic to
fail silently.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4220 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
An old settings key was lurking in the Configuration code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4218 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Sometimes parts of the application are not fully ready for release at
release time. This option allows such features to be enabled
conditionally at configure time.
The CMake option WSJT_ENABLE_EXPERIMENTAL_FEATURES is used to control
this ability. Normally you will not need to change it as it behaves
in a reasonable way. The option is ON in debug build configurations
and OFF in non-debug configuratiuons.
The option is made available in all source modules via the
WSJT_ENABLE_EXPERIMENTAL_FEATURES macro which is defined to 1 if the
option is ON and to 0 if it is OFF.
Since this default behavior is potentially dangerous because it can
mean that release builds contain different code from debug builds; the
option may be set to OFF in debug configurations in the normal way
(cmake-gui, edit CMakeCache.txt, etc.) to achieve a debug build
similar to a default release build.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Fake split mode attempts to take the rig out of split mode on
initialization and this caused an error when the rig doesn't support
split control via CAT. This specfic error is now ignored to allow fake
split mode to start cleanly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4174 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The validation processing of the free text line edit field was causing
the cursor position to be lost.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4148 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some non-modal help windows were not being automatically closed on
application exit.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
It is now possible to override the default locations hard coded in
this file with local preferences.
The variables that can be overridden are HAMLIB_DIR and DESTDIR.
To override, add local variable assignments on the intial qmake
command line. E.g.:
qmake HAMLIB_DIR=c:\my\local\hamlib\installation DESTDIR=c:\my\local\install\destination
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
to minimum in several places so that window contents extend to the
edges and widgets are packed more tightly. Arguably this makes
better use of available screen space.
Comments will be appreciated! If people don't like these changes,
they can be reverted.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Frequency changes must be made while the rig is in RX mode otherwise
they can end up getting ignored on some rigs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4137 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some rigs like the FT-857(D) have multiple modes that only have one
representation in the Transceiver class, e.g. FM, FM(N) and WFM. The
HRDTransceiver class now allows multiple modes to be mapped to one
Transceiver::MODE, the last match in the HRD mode dropdown is used
when mapping a Tranceiver::MODE to a HRD mode setting which is
normally the most suitable mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
I had inadvertantly locked WSJT-X into Qt 5.2 or later by using this
class which only appeared in Qt 5.2. I have made the usage
conditional on Qt version so that builds still work with any Qt 5
version.
As a result builds against Qt version < 5.2 no longer support command
line arguments, so multi-instance support now requires Qt 5.2.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4063 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The new suspend/resume approach to the received audio stream causes a
reset to the input sample buffer on resume. This is desired behaviour
except when the stream in not actually suspended. The monitor function
was not checking this when resuming monitoring and this caused decodes
for a period to be abandonded simply by using the "Halt TX" button to
turn off automatic transmission mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
part of r4046. These caused GUI installer packages to be incomplete.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Non-Debug build on *nix platforms now require a2x, it is optional
for other build configurations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4050 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Before the subsequent decodes on a period (nagain/=0) were truncating
the file and confusing JTAlert.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4047 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Added a manpages sub-project to generate man pages for wsjtx from
AsciiDoc source.
Add items required by Debian packaging and Free Desktop Standards.
Add better command line processing to wsjtx including version and help
options.
Add a new command line option 'test-mode' that invokes the Qt test
mode where all writable file locations are moved to a common
directory. This is to allow application testing from a repeatable
start point rather than have the test application sharing files with
normal operations. See QStandardPaths::setTestModeEnabled() for
details of the test location.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4046 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The macro edit page in the settings dialog now allows multiple items
to be selected in an extended selection.
The macro items can be rearranged by drag and drop of single items or
whole selections.
The delete button and context menu item will now delete all the
selected items.
The free text macro drop down combo boxes on the main screen now
automatically insert new macros into the macros list (at the end) if
the ENTER key is pressed while the combobox has focus.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4038 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Enhanced TransceiverBase error exception type to allow for language
translatable messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4033 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
WSJT-X has a capability of redirecting Qt debugging output (qDebug,
qWarning etc.) to a trace file 'wsjtx_trace.log' which is created in
the application run directory if not already present.
Setting the CMake build option WSJT_QDEBUG_TO_FILE to ON will enable
this feature.
It should be noted that this option is not compatible with a
distributibutable official release since writing to the application
directory is not recommended. Also in a full Release configuration
build all Qt debugging code is elided so no useful trace would be
obtained anyway.
The CMake option WSJT_QDEBUG_IN_RELEASE may be useful in concert with
this option as it causes Qt debugging statements to remain in place in
a Release build configuration. Again not recommended in a full
Release build since the debugging code both slows down the application
and adds unecessary bloat to the executable size.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4032 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Fixing revsion lookup issues is painfully public since one has to
commit a change to test it.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4018 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
all types of build.
CMake builds use 'svn info' (the git-svn equivalent is also supported)
to get the real latest revision of the workspace that is used to
source a build. If the sources are not in VCS workspace (build from
source snapshot archive for example) then the $Rev$ svn keyword
expansion in mainwindow.cpp is used despite its issues with accuracy.
Non-CMake builds use the $Rev$ keyword expansion where possible.
If a CMake build is from a VCS workspace with local modifications; a
'-dirty' suffix is added to the revision number to denote that.
If no revision number information can be found the word 'local' is
used as a revision number.
The revision specification is used in the WSJT-X "about" box and is
sent to PSKReporter.info as part of the local station information
(this can be viewed at the statistics page
http://pskreporter.info/cgi-bin/pskstats.pl).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4017 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
